Sarah was charged $54 for parts after the store's technician worked on the computer for 4.25 hours. The cost came to $585.25. The value of x is $125.
Let's use the variable x to represent the cost of the labor per hour.
The technician worked on the computer for 4.25 hours, so the cost of the labor would be:
4.25x
The technician also charged Sarah $54 for parts. So the total cost of the repair is:
4.25x + 54
We know that the total cost of the repair was $585.25. Therefore, we can write the following equation:
4.25x + 54 = 585.25
To solve for x, we need to isolate the variable on one side of the equation. First, we can subtract 54 from both sides:
4.25x = 531.25
Next, we can divide both sides by 4.25:
x = 125
Therefore, the cost of the labor per hour is $125.
To learn more about cost, refer:-
https://brainly.com/question/19326587
#SPJ1
when a group is thought to be related to a certain behavior or attitude when an individual has little experience with that group:
Answer:
When an individual has little experience with a group, and the group is believed to be related to a particular behavior or attitude, this is known as stereotyping.
Step-by-step explanation:
Stereotyping refers to a systematic method of categorizing individuals on the basis of a single characteristic, such as age, gender, or race, and then using that classification to make broad assumptions about them. It is a broad generalization that is made about a particular category or group of people. Stereotyping is an unfortunate part of our society, but it is not something that can be prevented entirely.
The most obvious effect of stereotyping is that it causes people to be unfairly labeled and judged. This can lead to discrimination, as well as negative behavior and attitudes towards certain groups of people. Stereotyping can also limit people's opportunities, both personally and professionally. When people are stereotyped, they are often overlooked for jobs, promotions, and other opportunities that they might otherwise be qualified for.
Learn more about stereotyping,
https://brainly.in/question/684699
#SPJ11
a slow-moving barge travels at a rate of 4 km per hour in still water. going upstream it travels 8 miles in the same time it takes the barge to travel 24 miles with the current. how fast is the current?
A slow-moving barge moves through the sea at a speed of 4 km/h. It travels 8 miles upstream in the same amount of time as a barge traveling 24 miles downstream with the current. The current moves at a 2 km/h rate.
Let’s start by using the formula for distance, rate, and time:
Distance = rate x time
Let’s assume that the rate of the current is r km per hour.
Going upstream (against the current), the effective rate of the barge is:
4 – r km per hour
Going downstream (with the current), the effective rate of the barge is:
4 + r km per hour
We are told that the time it takes the barge to travel 8 miles upstream is the same as the time it takes to travel 24 miles downstream. Using the formula, we can set up the following equation:
8 / (4 – r) = 24 / (4 + r)
We can simplify this equation by cross-multiplying:
8(4 + r) = 24(4 – r)
Expanding and simplifying, we get:
32 + 8r = 96 – 24r
Adding 24r and subtracting 32 from both sides, we get:
32r = 64
Dividing both sides by 32, we get:
R = 2
Therefore, the rate of the current is 2 km per hour.
To learn more about upstream, refer:-
https://brainly.com/question/17300107
#SPJ4
suppose is a critical point of a function with continuous second derivatives. in each case, what can you say about ?
Yes, if is a critical point of a function with continuous second derivatives, then it is a stationary point.
This means that the function's derivative is equal to 0 at that point and it is neither increasing or decreasing.
A stationary point is a point on the graph of a function where the function's derivative is equal to 0. This is an important property of a function and it can be used to determine the properties of the function.
At a stationary point, the rate of change of the function is equal to 0, so the function is neither increasing or decreasing. In other words, the function is neither increasing or decreasing at that point.
This property can be used to analyze the function and determine its characteristics. For example, it can be used to identify local minima or maxima.
To know more about critical point click on below link:
https://brainly.com/question/31017064#
#SPJ11
Please answer all three parts!!
The description of the transformations of the parent functions to produce the graphs of f(x) = sin(2x) and g(x) = csc(2x) are
a. The graphs of f(x) = sin(2x) and g(x) = csc(2x) are a horizontal compression by a factor of (1/2) of the graphs of y = sin(x) and y = csc(x).
b. 0, π/2, π, 3·π/2
c. 0, π/2, π, 3·π/2
What is the transformation of a function?A transformation of a function is an operation that changes the function's graph in some way.
a. The graph of f(x) = sin(2x) is obtained by taking the graph of sin(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the sine function has been multiplied by 2, which causes the period of the function to be halved.
The graph of g(x) = csc(2x) is obtained by taking the graph of y = csc(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the cosecant function has been multiplied by 2, which causes the period of the function to be halved.
b. The x-intercepts of the graph of f(x) = sin(2x) are the values of x for which f(x) = 0. Since sin(2x) = 0 when 2x is an integer multiple of π, we can find the x-intercepts by solving the equation 2x = n·π for x, where n is an integer. This gives us x = n·π/2. o four x-intercepts of the graph of f are x = 0, x = π/2, x = π, and x = 3·π/2.
c. The vertical asymptotes of the graph of the function g(x) = csc(2x) are the values of x for which g(x) is undefined. Since csc(2x) is undefined when 2x is an integer multiple of π, we can find the vertical asymptotes by solving the equation 2x = n·π for x, where n is an integer. This gives us x = (n·π)/2. So, four vertical asymptotes of the graph of g are x = π/2, x = 3·π/2, x = 5·π/2 and x = 7·π/2.
Learn more on the transformation of a function here: https://brainly.com/question/30968712
#SPJ1
the number of weaving errors in a twenty-foot by ten-foot roll of carpet has a mean of 0.5 . what is the probability of observing exactly 4 errors in the carpet? round your answer to four decimal places.
The probability of observing exactly 4 errors in the carpet is 0.0165 or 1.65%.
The number of weaving errors in a twenty-foot by ten-foot roll of carpet follows a Poisson distribution with a mean of 0.5. We can use the Poisson probability distribution formula to find the probability of observing exactly 4 errors in the carpet:
[tex]P(X = 4) = (e^{-0.5} * 0.5^4) / 4![/tex]
where X is the random variable representing the number of weaving errors. Plugging in the values, we get:
[tex]P(X = 4) = (e^{-0.5} * 0.5^4) / 4! = 0.0165[/tex] (rounded to four decimal places)
Find out more about probability
brainly.com/question/16937914
#SPJ4
Which statement is true?
A. 6 > 6
B. –8 < –3
C. 5 < –6
D. –12 > –6
Answer:
B is a true statement.
[tex] - 8 < - 3[/tex]
a wire of length 12 inches can be bent into a circle, square, or cut into two pieces and bent into both. how much wire should be used for the circle if the total area enclosed must be
The total area enclosed for a circle must be 40 inches.
To calculate how much wire should be used for the circle, use the formula for the circumference of a circle, C = 2πr, where r is the radius of the circle.
Plugging in the area (A = πr2), you get C = 2*(A/π)1/2. Thus, the total length of wire needed for the circle is 2*(40/π)1/2, which is approximately 12.8 inches.
To calculate the length of wire needed for the circle, the formula for the circumference of a circle is used. This is because the circumference of the circle is the total length of wire needed to make the shape.
The formula for the circumference of a circle is C = 2πr, where r is the radius of the circle. Since we know the area of the circle, A = πr2, we can plug this into the equation for the circumference to get C = 2*(A/π)1/2.
Plugging in the total area (40 inches) gives us the total length of wire needed, which is approximately 12.8 inches.
To know more about circumference click on below link:
https://brainly.com/question/28757341#
#SPJ11
2 and 1 half divided by 5
Answer: 0.5
Step-by-step explanation:
Answer:
As a decimal 0.5, as a fraction 1/2
4. what is the probability of choosing a red card (i.e. heart or diamond) out of a standard deck of 52 playing cards? a. 26/52 b. 13/26 c. 1/2 d. all of the above
52.
The probability of choosing a red card (heart or diamond) out of a standard deck of 52 playing cards is 26/52. This is because there are 26 red cards in a standard deck, so the probability of choosing one is 26 divided by the total number of cards in the deck
Learn more about probability
brainly.com/question/30034780
#SPJ11
Find the value of x. Round to the nearest degree. Did you find it with sin, cos−1, sin-1, or cos.
The value of x is 61° ( nearest degree)
What is trigonometric ratio?Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle. If side opposite the acute angle is the opposite side and the longest side is hypotenuse.
Sin(tetha) = opp/hyp
cos(tetha) = adj/hyp
tan( tetha) = opp/ adj
In this case,
the hypotenuse = 8
opposite = 7
therefore sin x = 7/8
sin x = 0.875
x = sin^-1 ( 0.875)
x = 61° ( nearest degree)
therefore the value of x is 61°
learn more about trigonometric ratio from
https://brainly.com/question/24349828
#SPJ1
how to factor a trinomial when a is greater than 1
To factor a trinomial when a is greater than 1, we can use the AC method
To factor a trinomial when a is greater than 1, follow these steps
Multiply the coefficient of a (the first term) by the constant (the third term).
Find two numbers that multiply to the product obtained in step 1 and add up to the coefficient of b (the second term).
Replace the middle term with the two terms found in step 2.
Factor the resulting four-term polynomial by grouping.
Factor out the greatest common factor from each group.
Factor the resulting binomials.
Combine the factors to obtain the final factorization of the trinomial.
This method is known as the AC method, and it can be used to factor trinomials of the form ax^2 + bx + c, where a is greater than 1.
Learn more about trinomial here
brainly.com/question/29083563
#SPJ4
Which system has exactly one solution?
A.(y + 4x = -2
y = -4x + 5
B. (6x + 3y = -1
2x + y = 4
C. y = 4x - 5
{ y = -x-5
D.3x - = 2
{y-4 = 3(x-2)
The system of equations that has only one solution is the one where the equations have different slopes, it is the one in option C.
y = 4x - 5
y = -x - 5
Which system of equations has only one solution?A system of linear equations will have only one solution always that the lines are neither parallel nor the same line.
So, one way to check this, is to write both lines in the slope intercept form, and check that the two lines have different slopes.
For example, the first option will give.
y = -4x - 2
y = -4x + 5
These are parallel (same slope different intercept), then this systm has no solutions.
The correct option will be C, where the system is:
y = 4x - 5
y = -x - 5
The slopes are different.
Learn more about systems of equations at:
https://brainly.com/question/13729904
#SPJ1
In ΔEFG, m ∠ � = ( 5 � + 6 ) ∘ m∠E=(5x+6) ∘ , m ∠ � = ( 4 � − 6 ) ∘ m∠F=(4x−6) ∘ , and m ∠ � = ( 5 � − 2 ) ∘ m∠G=(5x−2) ∘ . Find m ∠ � . m∠G.
Therefore , the solution of the given problem of angles comes out to be m∠G= 63° is the response to the second component of the query.
What does an angle mean?The curved lines which make up the ends of a skew are divided by its highest and bottom walls using Cartesian measurements. There is a possibility who two poles will collide at an intersection. Another result of two objects interacting is an angle. They most closely mimic dihedral shapes. Two line beams can be arranged in different ways between their extremities to form a two-dimensional curve.
Here,
m∠E + m∠F + m∠G = 180°
Additionally, we are aware that mE = (5x + 6)°, mF = (4x - 6)°, and mG = (5x - 2)°. When we enter these numbers into the formula above, we obtain:
=> (5x + 6)° + (4x - 6)° + (5x - 2)° = 180°
When we simplify and find x, we obtain:
=> 14x - 2 = 180
=> 14x = 182
=> x = 13
Now that we know the three vectors' values:
=> m∠E = (5x + 6)° = (5(13) + 6)° = 71°
=> m∠F = (4x - 6)° = (4(13) - 6)° = 46°
=> m∠G = (5x - 2)° = (5(13) - 2)° = 63°
In light of this, mE = 71°, mF = 46°, and mG = 63°.
The first portion of the question has the following solution:
=> m∠EFG = m∠E + m∠F + m∠G = 71° + 46° + 63° = 180°.
m∠G= 63° is the response to the second component of the query.
To know more about angles visit:
https://brainly.com/question/14569348
#SPJ1
eric from exercise 3.30 continues driving. after three years, he still has no traffic accidents. now, what is the conditional probability that he is a high-risk driver?
The conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. Generally, insurance companies use the number of traffic violations and/or the number of claims a driver has had within a certain time period as indicators of their riskiness.
As Eric has had no accidents or traffic violations, the probability that he is a high-risk driver is very low. However, this does not mean that the probability is zero. There are many other factors which can contribute to a driver's risk, such as age, gender, experience, and location.
If Eric is an experienced driver, who has been driving for many years with no traffic accidents, then the probability of him being a high-risk driver will be lower than the average driver. On the other hand, if Eric is a new driver, or is located in an area with a high rate of traffic accidents, then the probability of him being a high-risk driver may be higher than the average driver.
Overall, the conditional probability that Eric is a high-risk driver, given that he has had no traffic accidents in the past three years, is very low. However, this probability can change depending on other factors, such as his age, experience, and location.
See more about conditional probability at: https://brainly.com/question/23382435
#SPJ11
explain the difference between a population characteristic and a statistic. a population characteristic is a quantity that summarizes a ---select--- . a statistic is a quantity calculated from the values in a ---select--- .
Answer:
population, sample
Step-by-step explanation:
A population characteristic is a quantity that summarizes a
population
Correct: Your answer is correct.
. A statistic is a quantity calculated from the values in a
sample
m/4 = 5+m/5
Find the Value of m
find the surface area of this figure
The Surface area of the given cuboid is found to be 872 sq, in.
Explain about the cuboid?Three-dimensional shapes with length, breadth, and height are called cuboids. Six of the cuboid's sides are referred to as faces.
Every corner of a cuboid's faces, which usually refer to as vertices, are at a 90-degree angle. Hence, a cuboid is any object that has the shape of a box.The only thing that cuboids have are straight angles. It is not a cuboid if it has additional kinds of angles. The same is true for cubes. A cube and even a cuboid have the same number of edges, faces, and vertices: 12 edges, 8 vertices, and 6 faces.Surface area of a cuboid is = 2(lw + 2lh + hw0
l= lengthw= width.h = heightS.A = 2[(17)*(8) + (8)*(12) +(12)*(17)]
S.A = 2*436
S.A = 872
Thus, the Surface area of the given cuboid is found to be 872 sq, in.
Know more about the cuboid
https://brainly.com/question/26403859
#SPJ1
Ali and ben and clare each played a game
clares score was seven times alis score
ben score was half of alis score
write down the ratio of alis score to bens score to clares score
give your answer in its simplest form
The ratio of Ali's score to Ben's score to Clare's score in its simplest form is 1 : 3.5 : 7
Given data:
Claire's score = 7 * Ali's score
Ben's score = 0.5 * Claire's score
How to solve for the ratio of Ali's score to Ben's score to Clare's score
let Ali's score = x
let Ben's score = y
let Claire's score = z
z = 7 * x = 7x
z = 7x
y = 0.5 * z = 1/2 * z = z / 2
plugging the value of z gives
y = 7x / 2
writing the ratios in terms of x gives
Ali : Ben : Claire
x : y : z
x : 7x/2 : 7x
Reducing the terms by dividing through by x
1 : 7/2 : 7
OR
1 : 3.5 : 7
clearing the fraction gives
2 : 7 : 14
Therefore, the ratio of Ali's score to Ben's score to Clare's score in its simplest form is 1 : 3.5 : 7
To know more about ratio click here.
brainly.com/question/13419413
#SPJ4
A holiday package is valued at $15000 today. If inflation averages 2% per year, calculate the value of the holiday package indexed for inflation over 4 years
The value of the holiday package indexed for inflation over 4 years is $16,236.00, calculated using the formula Value after inflation = Value before inflation × (1 + inflation rate)ⁿ.
To calculate the value of the holiday package indexed for inflation over 4 years, we can use the formula:
Value after inflation = Value before inflation × (1 + inflation rate)ⁿ
("ⁿ" represents number of years)
where the inflation rate is given as a decimal.
Substituting the given values, we get:
Value after inflation = $15000 × (1 + 0.02)⁴
= $15000 × 1.0824
= $16,236.00
Therefore, the value of the holiday package indexed for inflation over 4 years is $16,236.00.
Learn more about inflation here: brainly.com/question/29065347
#SPJ4
Solve the system by graphing
Y = 5x + 1
Y = -x - 5
The solution of the system of equtaions:
Y = 5x + 1
Y = -x - 5
is (-1, -4), look at the graph at the end.
How to solve the system of equations graphically?To solve a system of equations graphically just graph both of the equations, in this case are the lines y = 5x + 1 and y = -x - 5, in the same coordinate axis and then identify the point where these two lines intersect.
That point will be the solution of the given system of equations.
Said graph can be seen in the image at the end. There you can see two lines, one orange and one blue, and the lines intersect at the point (-1, -4), so that is the solution of the system.
Learn more of systems of equations:
https://brainly.com/question/13729904
#SPJ1
A reservoir is 90% filled with liquid. The reservoir holds 1,330 gallons of liquid. How many gallons of liquid are needed to fill the reservoir to the top?
Choose the correct answer below.
A. 1,197 gallons
B. 133 gallons
C. 74 gallons
D. 1,330 gallons
Answer: B. 133 gallons
Step-by-step explanation: 90% of 1330 is 1197. you can take 10% which is 133 and multiply it by 9 to get that answer. then you have to subtract 1197 from 1330 to get you 133
Find the missing of dimension of the cone. Round you answer to the nearest tenth. Volume=13. 4m³
Radius=3. 2m
Height=h
The missing dimension of the cone is its height, which is approximately 2.5 m when rounded to the nearest tenth.
We can use the formula for the volume of a cone, which is:
Volume = (1/3)πr²h
where r is the radius of the base and h is the height of the cone.
We are given the volume of the cone as 13.4 m³ and the radius as 3.2 m. Substituting these values into the formula, we get:
13.4 = (1/3)π(3.2)²h
Multiplying both sides by 3 and dividing by π(3.2)², we get:
h = 3 × 13.4 / π(3.2)²
h ≈ 2.5 m
Find more about volume of the cone
brainly.com/question/1578538
#SPJ4
Given the function h(x), find the value of h(-2). h(x) = x² + 4x - 7
Step-by-step explanation:
[tex]{ \tt{h(x) = {x}^{2} + 4x - 7 }}[/tex]
Substitute for x as -2;
[tex]{ \tt{h( - 2) = {( - 2)}^{2} + 4( - 2) - 7}} \\ \\ { \tt{h( - 2) = 4 - 8 - 7}} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \\ \\ { \tt{h( - 2) = - 11}} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: [/tex]
Answer:-9
Step-by-step explanation:
h(-2)=h(x)
it symbolize that x=-2;
so, we'll replace every x with -2:
-2^2+3*(-2)-7=4-6-7=-9
a data set has a range of 22, a median of 40, and a mode of 52. if there six values in the data set, what could they be?
One possible set of values could be:
29, 30, 31, 52, 53, 54
Given:
Range = 22
Median = 40
Mode = 52
Number of values in the data set = 6
Since the median is 40, it indicates that two values in the data set are below 40, and three values are above 40.
The mode is given as 52, which means that at least one value in the data set is equal to 52.
There are six values in the data set, we can construct a possible set of values:
Min Value + 2 values below median + Mode + 3 values above median + Max Value = 6 values
Let's try one possible combination:
Min Value = 40 - 11 = 29
Max Value = Min Value + Range = 29 + 22 = 51
One possible set of values could be:
29, 30, 31, 52, 53, 54
Here, the range is 51 - 29 = 22, the median is 52, and the mode is also 52.
Learn more about the median of data here:
brainly.com/question/28060453
#SPJ12
A forecaster would like to use the 2-period moving average method on data below to make forecasts. Before doing this, she would like to test the performance of this method on past data. Which of the following could represent past forecasts for this method? (In the options below note that F1 represents the forecast for time period 1, and so on.)
Period 1 2 3 4 5 Actual Sales 5582 5122 5755 6320 5153
a. F1 = 5582 F2 = 5352 F3 = 5438.5 F4 = 6037,5 F5-5736.5 b. F1 = 5586.4 F2 = 5586.4 F3 = 5586.4 F4 = 5586.4 F5-5586.4 c. F2=5352 F3=5352 F4 = 5348.5 F5 - 6037.5 d. F3=5352 F4 = 5438.5 F5 = 6037.5 e. F3 = 5438.5 F4 = 6037.5 F5 = 5736.5 ________ encompasses the irregular changes in a time series that are not caused by any other component - Long-term trend - Cyclical effect - Random variation - Seasonal effect
The correct option for the past forecasts using the 2-period moving average method is:
A. F1 = 5582 F2 = 5352 F3 = 5438.5 F4 = 6037.5 F5 = 5736.5
Step-by-step explanation:
1. To calculate F2, take the average of Period 1 and Period 2 actual sales: (5582 + 5122) / 2 = 5352.
2. For F3, average Period 2 and Period 3 actual sales: (5122 + 5755) / 2 = 5438.5.
3. For F4, average Period 3 and Period 4 actual sales: (5755 + 6320) / 2 = 6037.5.
4. For F5, average Period 4 and Period 5 actual sales: (6320 + 5153) / 2 = 5736.5.
"Random variation" encompasses the irregular changes in a time series that are not caused by any other component. Some common example of random variation is coin toss. It is independent of the effects of systematic biases. In general, the larger the sample size is, the lower the random variation is of the estimate of a parameter. As random variation decreases, precision increases.
LEARN MORE ON FORECAST AT:https://brainly.com/question/31538767
#SPJ11
Can someone please help me these questions are due tn
Answer:
$10.98
Step-by-step explanation:
$10.98
0.06 x 183 = $10.98
1 1/3 + 2 1/4. 8 5/8-7 1/2 =
Answer:
9/8
Step-by-step explanation:
1 1/3 + 2 1/4 = (4/3 + 9/4) = (16/12 + 27/12) = 43/12
8 5/8 - 7 1/2 = (69/8 - 15/2) = (69/8 - 60/8) = 9/8
Therefore, 1 1/3 + 2 1/4 = 43/12 and 8 5/8 - 7 1/2 = 9/8.
Determining the top three winners in a Science Quiz Bee Forming lines from six given points with no three of which are
The nature of formula (Permutations or Combinations) for each scenario is the following:
1) Permutations ; 2) Combination
3) Combination ; 4) Permutations
5)Permutations ; 6)Combination
7) Combination ; 8)Combination 9)Combination ; 10)Combination.
Permutations formula: Permutation is considered an ordered combination. The general formula for this is,
P(n, r) = n! /(n-r)!
Combination formula: It is considered arrangement ways but without ordered combination. The general formula for this is C(n, r) = n!/ (n-r)! r!
Now, we have provide some situations and we have to resolve them.
1) Determining the top three winners ing Science Quiz have to Bee is an example of Permutation as here we just arrange the position for top winners.
2) Forming lines from six given points with no three of which are collinear, is an example of combination because only pair of points is needed.
3) It will be a combination as here we select 3 points to make a triangle user.
4) Four people posing for pictures is an example of Permutation as oder does not matter.
5) Assembling a jigsaw puzzle is an example of Permutations.
6) As here we choose 2 household chores so it is a combination.
7) Selecting 5 basketball players out of 10 team members for the different positions members it is a combination.
8) Choosing three friend for birthday party is combination formula.
9) Picking 6 balls from a basket by 12 balls is combination formula.
10) Forming a committe of 5 members from do people 20 combinations people.
For more information about permutations and combinations, visit :
https://brainly.com/question/29594894
#SPJ4
Complete question:
P- Permutations or C- Combinations.
1. Determining the top three winners in a Science Quiz Bee
2. Forming lines from six given points with no three of which are collinear
3. Forming triangles from 7 given points with no three of which are collinear
4. Four people posing for pictures
5. Assembling a jigsaw puzzle
6. Choosing 2 household chores to do before dinner
7. Selecting 5 basketball players out of 10 team members for the different positions
8. Choosing three of your classmates to attend your party
9. Picking 6 balls from a basket of 12 balls
10. Forming a committee of 5 members from 20 people
If $4,323 was withheld during the year and taxes owed were $4,576:
a. Would the person owe an additional amount or receive a refund?
b. What is the amount? [Make sure to show your work]
Answer:
a. Since taxes owed ($4,576) are greater than the amount withheld ($4,323), the person would owe an additional amount.
b. The additional amount owed can be calculated by subtracting the amount withheld from the taxes owed:
Additional amount owed = Taxes owed - Amount withheld
= $4,576 - $4,323
= $253
Therefore, the person would owe an additional $253.
Please mark my answer as brainliest!
a rod placed up against a wall is sliding down. the distance between the top of the rod and the foot of the wall is decreasing at a rate of 9 inches per second. when this distance is 152 inches, how fast is the distance between the bottom of the rod and the foot of the wall changing? the rod is 172 inches long.
when the distance between the top of the rod and the foot of the wall is 152 inches, the distance between the bottom of the rod and the foot of the wall is decreasing at a rate of approximately 19.08 inches per second.
In this case, we are given that the distance between the top of the rod and the foot of the wall is decreasing at a rate of 9 inches per second. We want to find the rate at which the distance between the bottom of the rod and the foot of the wall is changing.
We can start by using the Pythagorean theorem to relate the three distances involved: the height of the rod (h), the distance between the top of the rod and the foot of the wall (x), and the distance between the bottom of the rod and the foot of the wall (y). Specifically, we have:
[tex]h^2 = x^2 + y^2[/tex]
To find the rate at which y is changing, we can take the derivative of both sides of this equation with respect to time (t), using the chain rule:
2h dh/dt = 2x dx/dt + 2y dy/dt
We are given that dh/dt = -9 inches per second (since h is decreasing). We also know that h = 172 inches and x = 152 inches (when y = 0). Substituting these values and solving for dy/dt, we get:
dy/dt = (h/x) * (dx/dt - (x/y) * dh/dt)
dy/dt = (172/152) * (-9 - (152/y) * 9)
dy/dt = -19.08 inches per second (rounded to two decimal places)
Find out more about Pythagorean theorem
brainly.com/question/15175162
#SPJ4