When a loose brick is resting on a wall, it has potential energy. When the brick is pushed off the wall and is falling down, the amount of potential energy is decreasing while the amount of kinetic energy is increasing.
Kinetic energy is motion––of waves, electrons, atoms, molecules, substances, and objects. Potential energy is stored energy and the energy of position––gravitational energy. There are several forms of potential energy.
Conservation of energy is not saving energy. The law of conservation of energy says that energy is neither created nor destroyed. When we use energy, it doesn’t disappear. We change it from one form of energy into another.
A car engine burns gasoline, converting the chemical energy in gasoline into mechanical energy. Solar cells change radiant energy into electrical energy. Energy changes form, but the total amount of energy in the universe stays the same.
Energy efficiency is the amount of useful energy you get from a system. A perfect, energy-efficient machine would change all the energy put in it into useful work—an impossible dream. Converting one form of energy into another form always involves a loss of usable energy.
To know more about kinetic energy here
https://brainly.com/question/12337396
#SPJ4
If the work done to move a toy car by a force of 20N is 60J how far did the car move?
Answer: Distance = 60 J / 20 N = 3 meters. So the car moved a distance of 3 meters.
Explanation: To determine how far the car moved, you need to know how long the force was applied. The equation for work is work = force * distance, so if you know the force and the work, you can solve for the distance. In this case, you know that the force applied was 20 N and the work done was 60 J, so you can calculate the distance by rearranging the equation to solve for distance: distance = work/force. Plugging in the values, you get distance = 60 J / 20 N = 3 meters. So the car moved a distance of 3 meters.
Important Formulas:
[tex]w=Fd[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
__________________________________________________________
Given:
[tex]w=60J[/tex]
[tex]F=20N[/tex]
[tex]d=?[/tex]
__________________________________________________________
Rearranging formula to make distance the subject:
[tex]w=Fd[/tex]
[tex]\dfrac{w}{F} =\dfrac{Fd}{F}[/tex]
[tex]d=\dfrac{w}{F}[/tex]
__________________________________________________________
Finding distance:
[tex]d=\dfrac{w}{F}[/tex]
[tex]d=\dfrac{60}{20}[/tex]
__________________________________________________________
[tex]\fbox{d = 3 meters}[/tex]
Most of us know intuitively that in a head-on collision between a large dump truck and a subcompact car, you are better off being in the truck than in the car. Why is this? Many people imagine that the collision force exerted on the car is much greater than that exerted on the truck. To substantiate this view, they point out that the car is crushed, whereas the truck is only dented. This idea of unequal forces, of course, is false; Newton's third law tells us that both objects are acted upon by forces of the same magnitude. The truck suffers less damage because it is made of stronger metal. But what about the two drivers? Do they experience the same forces? To answer this question, suppose that each vehicle is initially moving at 6.60 m/s and that they undergo a perfectly inelastic head-on collision. Each driver has mass 75.0 kg. Including the masses of the drivers, the total masses of the vehicles are 800 kg for the car and 4,000 kg for the truck. If the collision time is 0.100 s, what force does the seat belt exert on each driver? (Enter the magnitude of the force.)
Answer:
According to Newton's third law, the force exerted on each driver during the collision is equal and opposite to the force exerted on their respective vehicles. We can use the principle of conservation of momentum to find the force experienced by each driver.
The initial momentum of the car and driver is the product of their mass and velocity: (800 kg)(6.60 m/s) = 5280 kgm/s. The initial momentum of the truck and driver is (4000 kg)(6.60 m/s) = 26400 kgm/s. After the collision, the final momentum of the combined system (the car, truck, and drivers) is 0, since the collision is perfectly inelastic and the two vehicles stick together. This means that the final momentum of the car and driver is equal and opposite to the final momentum of the truck and driver.
We can set up the following equation to solve for the force experienced by the car driver:
Force (car driver) = (final momentum of car and driver) / (collision time)
= (-final momentum of truck and driver) / (collision time)
= (-26400 kg*m/s) / (0.100 s)
= -26400 N
The negative sign indicates that the force is in the opposite direction of the initial momentum of the car and driver. The force experienced by the truck driver is equal in magnitude to the force experienced by the car driver, so the force experienced by the truck driver is also -26400 N.
Explanation:
If a circle has a circumference of 25.1 cm compare where the object would have been if it had gone in a straight line at 4 cm/s for 6.28 seconds(no acceleration) to where it is after it has gone around the circle for 6.28 at 4.0cm/s
The object would have returned to its initial starting point if it had travelled round a circle.
What is the distance travelled by the object?
The distance travelled by the object is determined from the product of speed of the object and the time of motion of the object.
D = vt
where;
v is the speed of the object = 4 cm/st is the time of motion of the object = 6.28 sThe distance travelled by the object is calculated as follows;
D = ( 4 cm / s ) x ( 6.28 s )
D = 25.1 cm
Thus, at the given time and speed the object would have travelled round the circle. That is the object would have made one complete revolution.
Learn more about distance here: https://brainly.com/question/2854969
#SPJ1
why does increasing axon diameter increase conduction velocity conduction resistance capacitance
The increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.
Capacitor is a body which is used to store the electricity in it and we can use it in the time when we need it in the circuit. also we can use the capacitor in the jumping the charge and electricity from the spark gap in the circuit to attain a good height and velocity as we needed it. by this information we can primarily consider that the increasing axon diameter increase the conduction velocity conduction in resistance capacitance because of the possibility of smooth movement of electrons in the capacitor and the smooth flow of charges in it that supports the electric current to flow in a smooth manner.
Learn more about capacitance:
brainly.com/question/12644355
#SPJ4
Describe the properties of waves and explain how they can be measured.
Why is a sound wave considered a mechanical wave?
The properties of waves are: wavelength, time period.
Sound wave is considered a mechanical wave because it requires medium to travel.
What is mechanical wave?A mechanical wave is one whose energy cannot be transmitted via a vacuum. To transfer their energy from one place to another, mechanical waves need a medium.
A mechanical wave is something like a sound wave. A vacuum can not be traversed by sound waves.
Units of time and space can be used to measure the fundamental characteristics of waves. The length between wave crests, or wavelength (L), and the time it takes a wave to pass a fixed point, or period (T), are two characteristics that can be measured directly.
Learn more about mechanical wave here:
https://brainly.com/question/3101711
#SPJ1
an object with mass m is dropped from rest, one model for its speed v after t seconds, taking air resistance into account, is
The required lim t → ∝ v(t) when an object is dropped from rest is calculated to be mg/c.
Given that,
An object with mass m is dropped from rest and taking air resistance into account.
The velocity as a function of time is,
v(t) = (m g)/c [ 1 - e^-(ct/m)]
v(t) = (m g)/c [ 1 - 1/e^(ct/m)]
lim t → ∝ v(t) = (m g)/c [ 1 - 1/∝]
lim t → ∝ v(t) = (m g)/c ( 1 - 0)
lim t → ∝ v(t) = (m g)/c
Thus, the required lim t → ∝ v(t) when an object is dropped from rest is calculated to be mg/c.
The question is incomplete. The complete question is 'v = mg c (1 − e−ct/m) where g is the acceleration due to gravity and c is a positive constant describing air resistance. (a) Calculate lim t→∞ v.'
To know more about limits:
https://brainly.com/question/12989799
#SPJ4
do you think humans might be useful as index fossils in the future. Explain.
Index fossils are fossils that are used to help determine the relative age of rock layers and sedimentary strata. They are typically small, widely distributed organisms that lived for a relatively short period of time and are characteristic of a specific geological period. Index fossils are useful because they can help geologists and paleontologists to determine the relative age of rock formations and to understand the Earth's geological history.
It is unlikely that humans would be useful as index fossils in the future, as the time period during which humans have existed on Earth is relatively short compared to the age of the Earth as a whole. In addition, humans are not small, widely distributed organisms like many of the commonly used index fossils. Instead, humans are large, highly adapted organisms that have a wide range of habitats and are found on most of the continents.
However, it is possible that artifacts or other remains associated with human activity could be used as index fossils in the future. For example, the presence of certain types of tools or other materials might be used to help determine the relative age of a site or to understand the environmental conditions and human activity in a particular region at a specific point in time.
Hope This Helps You!
How does plastic pollution affect the earth
Answer:
It doesn't allow plants and crops to grow also some animals take them to be food so they die which wipes out the population of animals and plants
Answer:
when plastic is shown in the sea, it affects animals. some sea creatures may think it's food and swallow it. If the plastic is shown, plants won't grow very well because there is not fertile soil.
Explanation:
I hope this helped!
What is the acceleration of a 56 kg object pushed with a force of 800 newtons?
Answer:
The acceleration of an object can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. The equation is:
F = ma
where F is the force, m is the mass, and a is the acceleration.
So, if we know the mass of the object (m = 56 kg) and the force acting on it (F = 800 N), we can calculate the acceleration (a) by dividing the force by the mass:
a = F / m
a = 800 N / 56 kg
a = 14.28 m/s^2
So the acceleration is 14.28 m/s^2
What type of reaction is being shown in this energy diagram?
Answer:
im 95% sure the answer is d
A horizontal force of 12 Newtons is applied to a 4.0 kg box that slides on a horizontal surface. The box starts from rest moves a horizontal distance of 10 meters and obtains a velocity of 5.0 m/s. The surface has friction. The friction force is
Group of answer choices
4.9 N.
6.0 N.
7.0 N.
6.5 N.
Answer:
7.0N
Explanation:
F=ma
v2=u2+2as
25=0+20a
a=1.25m/s2
F=ma
F=0.4×1.25
Fn=5N
F=12
12-5=Ff
=7.0N
A horizontal force of 12 newtons is applied on a box of 4 kg then the friction force will be equal to 7 N. Hence option C is correct.
What is Velocity?Velocity is the rate at which a moving object's direction changes as perceived from a certain vantage point and measured by a particular unit of time. Kinematics, the area of special relativity that investigates how bodies move, starts with the fundamental idea of speed.
In order to be explained, the scientific vector quantity known as velocity needs to have both a magnitude and a direction.
As per the given information in the question,
Use the equation of motion:
v² = u² + 2as
25 = 0 + 20a
a = 1.25 m/s2
F = ma
F = 0.4 × 1.25
Fn = 5 N
F = 12
Ff = 12 - 5
Ff = 7.0 N
Therefore, it concludes that the friction force will be equal to 7.0 N.
To know more about Velocity:
https://brainly.com/question/18084516
#SPJ2
An object is dropped from a height of 8 m. At what height will its kinetic energy and its potential energy be equal
At the peak it has the same potential and kinetic energy.
How is kinetic energy calculated?Kinetic energy (K.E.) is inversely proportional to the square of an object's velocity and its mass: K.E. = 1/2 m v2. When a mass is measured in kilograms and a speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.
Kinetic energy and potential energy are equivalent at what height?The velocity will be zero and the ball's displacement will be at its maximum at the highest point of the trajectory. We might state that the energy present is equivalent to the sum of the potential energy.
To know more about kinetic energy visit:-
https://brainly.com/question/15764612
#SPJ4
If a moving ball is hit by another moving ball ,what effect of force can be observed in such a situation?
Answer:
The forces are the weight, drag, and lift. Lift and drag are actually two components of a single aerodynamic force acting on the ball. Drag acts in a direction opposite to the motion, and lift acts perpendicular to the motion.
Explanation:
Hope it helps u
FOLLOW MY ACCOUNT PLS PLS
Select the correct answer. if a running system has a total change in the heat of 315 joules, and it is running at a temperature of 350 k, what is the entropy?
a. 1.54 joules/kelvin
b. 0.847 joules/kelvin
c. 1.22 joules/kelvin
d. 0.900 joules/kelvin e. 0.762 joules/kelvin
If a running system has a total change in the heat of 315 joules, and it is running at a temperature of 350 k, the entropy will be e. 0.762 joules/kelvin.
Entropy is essential for understanding the behavior of many physical systems, such as in thermodynamics, statistical mechanics, and thermochemistry.
Entropy can be used to analyze the efficiency of a system, as well as its stability and predictability.
This can be calculated by using the formula S = ΔQ/T, where S is entropy, ΔQ is the total change in heat and T is temperature. In this case ΔQ = 315 Joules and T = 350K.
Plugging these values into the equation gives us S = 315/350, which equals 0.762 joules/kelvin. Hence, option e is correct.
To learn more about heat, click here:
https://brainly.com/question/13439286
#SPJ4
What is the formula of law of lever?
"Effort multiplied by an arm equals burden multiplied by an arm," The various loads on the proportionally shorter load arm can be moved by the effort arm.
What does a class lever mean?A lever is a straightforward device with a solid beam and a fulcrum. The effort (input force) and load (output force) are applied to the beam's ends. The pivot of the beam is thought to be the fulcrum.
What do you name a lever?Levers are devices that increase force, to put it simply. Because they merely have the handle and the fulcrum, we refer to them as "basic machines." The "arm" of the lever is the handle or bar; it is the portion that you push against or pull towards.
To know more about law of lever visit:-
https://brainly.com/question/2450974
#SPJ4
In which situation is the acceleration of the car negative?
A. The velocity of the car was 75 km/h over 4 hours
B. The velocity of a car was reduced from 50 km/h to 35 km/h over one minute
Answer:
The answer is B
4. A 9.35 kg bowling ball would require what force to accelerate it down an alleyway at
a rate of 3.12m/s²?
The force needed is 29.2 N.
To calculate the force needed to accelerate a 9.35 kg bowling ball at a rate of 3.12 m/s²,
you can use the equation F = ma, where F is the force, m is the mass of the object (in this case, the bowling ball), and a is the acceleration. Putting in the values, you get:
F = (9.35 kg) x (3.12 m/s²)
= 29.2 N
This works out to be approximately 29.2 Newtons of force.
To know about numericals related to this topic:-
https://brainly.com/question/29790570
Answer the questions based on the information given. The Amur plate, a small plate, has moved away from the Eurasian plate. It has moved125,000 meters in 25 million years. It is moving eastward. What is the rate of motion of the Amur plate
The solutions are: The movement is 5 mm per year. The plate is 5,000 meters to the east. The Amur and Eurasian plates would collide, creating an ocean floor.
The rate of motion is in mm per year so you need to convert the distance it has moved to millimeters.
1 meter = 1,000 meters
125,000 will therefore be:
= 125,000 * 1,000
= 125,000,000 millimetersRate of motion = 125,000,000 / 25,000,000 years
= 5 mm/year
The plate is moving east and in 1 million years it would be:
= 1,000,000 * 5 mm/year
= 5,000,000 mm
n meters this is:
= 5,000,000 / 1,000
5,000 meters east
ecause the Amur and the Eurasian plates are moving apart, the ocean would have to fill up the space left which would lead to the development of a new oceanfloor.
Learn more about motion here-
https://brainly.com/question/22810476
#SPJ4
Answer: 5 mm/year, 5000 meters east, new ocean floor
Explanation:
During a magic trick, a magician twirled a ball on a string horizontally at a constant rate. He then doubled the length of the string but maintained the rate at which the ball rotated. Which of the following factors remained constant? A angular velocity B centripetal acceleration с centripetal force
Correct option is C, Centripetal force remains constant.
Centripetal Force -
Any force that changes the direction of motion toward the center of a circular motion is known as a centripetal force. The part of the force that produces the centripetal force is the part that is perpendicular to the velocity.
A net force that keeps an object moving in a circular motion is known as a centripetal force.
Centripetal force has the formula =mv2r. The newton or kgms2 is the measure of force.
A centripetal force is applied to any item travelling in a circle (or along a circular path). In other words, the object is being physically pushed or pulled in the direction of the circle's center. This is the necessary centripetal force.
To learn more about Centripetal force from given link
https://brainly.com/question/20905151
#SPJ4
HELLLPPP FAST PLS
Look around and identify at least one acid and one base in your house. Foods, household products, and medicines have acidic or basic properties.
Use the Internet, your library, or science textbooks to learn more about acids and bases. Identify important characteristics, chemical properties, physical properties, pH ranges, and examples of acids and bases. Ideas for reporting the information include: make lists, write a paragraph, or use a Venn diagram. Please make sure to review the grading rubric. You will turn your work in to your instructor.
Include the following information about acids and bases in your work:
Chemical properties
Physical properties
pH
Examples around you
Answer:
Oh I had this question before! :)
Explanation:
Acid - citrus products - the classic one is lemon juice
Anything with a sour taste is acidic
Base - soap, oven cleaner, drain cleaner, baking soda
Basic things are bitter (please don't taste the drain cleaner and oven cleaner)
A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space at 17 00. 0 m/s * a * w * a * y Suppose the astronaut and his Manned Maneuvering Unit ( MMU) have a mass of 400. 00 kg and travel at 17 010. 0 m/s toward the satelliteWhat is the combined velocity when the astronaut grabs hold of the satellite?
A Shuttle astronaut is sent to repair a defective relay in a 600. 00- kg satellite that is traveling in space. The combined velocity when the astronaut grabs hold of the satellite is 17,004.4 m/s.
The combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is the relative velocity between the two objects. The relative velocity can be calculated using the principle of conservation of momentum. The principle states that the total momentum of an isolated system remains constant if no external forces act on it.
The initial momentum of the satellite is
= (600.00 kg) * (17,000.0 m/s)
= 10,200,000 kg*m/s
The initial momentum of the astronaut and the MMU is
= (400.00 kg) * (17,010.0 m/s)
= 6,804,400 kg*m/s
The final momentum of the combined system is
= (600.00 kg + 400.00 kg) * v,
where v is the final velocity of the combined system.
The conservation of momentum equation:
=> initial momentum = final momentum
= 10,200,000 kgm/s + 6,804,400 kgm/s
= (1000 kg) * v
= v
= (10,200,000 + 6,804,400) / 1000
= v
= 17,004.4 m/s
So, the combined velocity of the astronaut and the satellite when the astronaut grabs hold of the satellite is 17,004.4 m/s.
It's important to note that the relative velocity is the same in both directions, this is a vector quantity and direction is important.
To know more about velocity please refer: https://brainly.com/question/18084516
#SPJ4
A 30,000-kg freight car is coasting at 0.850 m/s with negligible friction under a hopper that dumps 110,000 kg of scrap metal into it. (a) What is the final velocity of the loaded freight car
The freight car which is being dumped into the metal scrap has the final velocity of 0.18 m/s.
In this problem, we use the principle of conservation of linear momentum.
Given that,
Mass of the freight car m₁ = 30,000 kg
Mass of the hopper m₂ = 110,000 kg
Velocity of the freight car u₁ = 0.85 m/s
Velocity of the hopper u₂ = 0
Let the velocity of the loaded freight car = v
We need to find out v.
m₁ u₁ + m₂ u₂ = ( m₁ + m₂) v
After putting the values into the equation above, we have,
30,000 × 0.85 + 110,000 × 0 = (30,000 + 110,000) v
140,000 v = 25500
v = 0.18 m/s
Thus, the required velocity of the loaded freight car is calculated to be 0.18 m/s.
To know more about velocity:
https://brainly.com/question/12945710
#SPJ4
ANSWER NOW 100 POINTS!!
Allen rides his bike at a constant speed around a circular track. If the radius of the track is 45.0 m and Allen's centripetal acceleration is 5.0 m/s2, what is his tangential speed?
Answer:
a = v2/r, for an object moving with a constant speed, v, around a circle of radius, r. We will also verify that the direction of the acceleration vector is toward the center of the circle.
substitute your numbers into the formula
5.0 = v2/45.0
then cross multiply to get your final answer
Calcium (Ca) is in the second column of the periodic table and is classified as an alkaline earth metal. Which of the following formulas shows the ratio of a compound formed from Calcium and Bromine (Br)?A.
CaBr2
B.
CaBr
C.
CaBr3
D.
Ca2Br
Answer:
CaI2
Explanation:
A person on a bike (m=90kg) is traveling 4m/s at the top of a 2m hill. What is his/her kinetic energy?
Answer:
Ek = 720J
Explanation:
Ek = 0.5mv^2
Ek = 0.5(90)(4)^2
Ek = 720J
What is the difference between dynamic and passive stretching?
It is a passive stretch if it depends on an outside force. Stretches that are passive and static are a fantastic technique to increase flexibility and can also be utilised to cool down.
What is the difference between static and passive stretching?Passive stretching, which is called a static stretch, is a technique in which you remain calm and do not add to the range of motion. Static stretching involves stretching all the way to the end and holding the stretch. An external force, like a partner, is instead produced by an external force.
This stretching technique relies on a prop, accessory, or partner to help increase the stretch, thus you aren't actively assisting in extending your range of motion. Passive stretches improve flexibility while reducing muscle soreness and tiredness after a workout.
Stretching with movement is known as dynamic stretching. It stretches the muscles by using the muscles themselves. The usual "static" stretching is not like this.
To learn more about static stretching refer to:
https://brainly.com/question/10238897
#SPJ4
(I know the velocity (1.6m/s) and now I want to find the angle of the vector. )
A rower intends to row his raft at its top speed of 1.5 m/s from the south bank of a river to a point
directly opposite on the north bank. He fails to recognise the river current which pulls a Jog west at
0.50 m/s, What is the raft's resultant velocity with respect to the bank?
Answer:
R = 1.5 to the northeast
C = .5 to the west
B = C + R adding vectors head to tail
Vector B will be straight north or directly across the river
B = (1.5^2 - .5^2)^1/2
B = 2^1/2 = 1.41
Adding the vectors as described shows that if the rower rows at 1.5 m/s in a northeasterly direction and the river carries the boat downstream at .5 m/s the net speed of the boat is 1.41 m/s straight north
When using a 20 ft ladder how far from a building should the base of the ladder be?
When using a 20 ft ladder the distance from a building should be the base of the ladder by 5 ft
The base of a ladder should be positioned one-quarter of the working length of the ladder from the building. Therefore, when using a 20 ft ladder, the base should be positioned 5 ft from the building. Additionally, the ladder should be placed on a solid and level surface, and the feet of the ladder should be securely wedged to prevent slipping.
Extend the top of the ladder three feet above the work table to get access to it, or fasten the ladder at the top.
Learn more about Ladder Safety Self-Study Unit here: https://brainly.com/question/13835992
#SPJ4
Frank is pulling on a rope to drag his backpack to school across the ice. He pulls upwards and rightwards with a force of 26.7 Newtons at an angle of 17 degrees above the horizontal to drag his backpack a horizontal distance of 129 meters to the right. Determine the work done upon the backpack. in joules.
The work done upon the backpack is 3293 Joule.
What is force?
The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
The work done upon the backpack is = applied force × displacement × cosα
= 26.7 N × 129 meters × cos17°
= 3293 Joule.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
2 points
A car traveling at 25 m/s forward completes a sharp turn to the left. Fully
explain what an unbuckled passenger in the car experiences as the car
moves through the turn, assuming the passenger completes the turn in
the car. You must also properly explain inertia's role in this scenario *
An unbuckled passenger in the car experiences movement towards right side due to inertia as the car moves towards left.
According to Newton's first law of motion, every body continues to be in a state of rest or of uniform motion unless an external force acts upon it. This is called inertia. It is the tendency of an object to resist change.
As a result, when the car makes a sudden left turn, the passengers appear to move to the right side of the vehicle because they are still travelling in the same straight line that the car was travelling in before the turn.
To know more about inertia:
https://brainly.com/question/2289967
#SPJ4