In the given problem, once we know the dielectric constant εr = 200, we can use this information to determine the capacitance of the capacitor. It is determined by the material's properties and represents the degree to which the material can be polarized in response to an external electric field.
The dielectric susceptibility is a fundamental property of a material that quantifies its response to an electric field. It is defined as the ratio of the electric polarization of the material to the electric field strength applied to it. Mathematically, it is expressed as:
χ = P / ε₀E
Where χ is the dielectric susceptibility, P is the electric polarization, E is the electric field strength, and ε₀ is the vacuum permittivity (a fundamental constant with units of C²/(N·m²)).
To understand why the dielectric susceptibility has no units, we need to examine the components of the equation. The electric polarization, P, is measured in units of electric dipole moment per unit volume (C/m²), and the electric field strength, E, is measured in volts per meter (V/m). The vacuum permittivity, ε₀, has units of C²/(N·m²).
By analyzing the units in the equation, we find that the units of electric dipole moment per unit volume (C/m²) cancel out with the units of the vacuum permittivity (C²/(N·m²)), leaving the dielectric susceptibility as a dimensionless quantity. This means that the dielectric susceptibility is solely a numerical value representing the material's response to an electric field, independent of any specific unit system.
Therefore, in the given problem, once we know the dielectric constant εr = 200, we can use this information to determine the capacitance of the capacitor. However, the dielectric susceptibility itself does not play a direct role in the calculation of capacitance.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
Electrons in an x-ray machine are accelerated from rest through a potential difference of 60 000 V. What is the kinetic energy of each of these electrons in eV?
60 eV
96 eV
38 eV
60 keV
120 eV
Electrons in an x-ray machine are accelerated from rest through a potential difference of 60 000 V. Therefore, the kinetic energy of each of these electrons is 60 keV.
Given ,Potential difference, V = 60,000 V. The energy of an electron, E = potential difference x charge of an electron (e)
The charge of an electron is e = 1.6 × 10⁻¹⁹CThe kinetic energy of an electron is calculated by using the formula, Kinetic energy = energy of an electron - energy required to remove an electron from an atom = E - ϕ where, ϕ is work function, which is the energy required to remove an electron from an atom.
This can be expressed as, Kinetic energy of an electron = eV - ϕ Now, let's find the energy of an electron.
Energy of an electron, E = potential difference x charge of an electron (e)= 60,000 V × 1.6 × 10⁻¹⁹C = 9.6 × 10⁻¹⁵ J
Now, to find the kinetic energy of each of these electrons in eV, Kinetic energy of an electron = E/e= (9.6 × 10⁻¹⁵ J) / (1.6 × 10⁻¹⁹ C) = 6 × 10⁴ eV= 60 keV
Therefore, the kinetic energy of each of these electrons in eV is 60 keV.
Learn more about Kinetic energy here:
https://brainly.com/question/26405082
#SPJ11
A boat whose velocity through the water is 14 km/h is moving in a river whose current is 6 km/in relative to the riverbed. The velocity of the boat relative to the riverbed must be between O 6 and 14 km/h 6 and 20 km/h and 14 km/h 8 and 20 km/h
A boat whose velocity through the water is 14 km/h is moving in a river whose current is 6 km/h.
To determine the velocity of the boat relative to the riverbed, we need to calculate the resultant velocity of the boat. The velocity of the boat relative to the riverbed must be between 8 km/h and 20 km/h.Resolution of the velocities can be used to determine the resultant velocity. It refers to the separation of a vector quantity into two or more components. By definition, these components are scalar components.
A velocity vector's resolution into two perpendicular components is known as a rectangular resolution.
Let’s find the resultant velocity by using the formula of the Pythagorean theorem.
Velocity of the boat relative to the riverbed = Velocity of the boat in still water + velocity of the rivercurrent
= 14 km/h + 6 km/h= 20 km/h
Using the Pythagorean theorem, the resultant velocity is determined as follows:
Resolving the velocity in the x and y directions:
Velocity in the x-direction (upstream) = V × cos θ= 20 × cos 30°
= 17.32 km/h
Velocity in the y-direction (downstream) = V × sin θ= 20 × sin 30°= 10 km/h
Therefore, the boat's velocity relative to the riverbed is between 8 km/h and 20 km/h.
Learn more about resultant velocity here
https://brainly.com/question/12982473
#SPJ11
The burner on an electric stove has a power output of 2.0 kW. A 760 g stainless steel tea kettle is filled with 20°C water and placed on the already hot burner. If it takes 29 min for the water to reach a boil , what volume of water, in cm, was in the kettle? Stainless steel is mostly iron, so you can assume its specific heat is that of iron.
The mass of the water is 760g.
The specific heat of water is 4.18 J/gK.
To heat the water from 20 to 100°C takes 80°C.
Using Q = m x C x ΔT,
we have Q = 760 x 4.18 x 80 = 252,684 J needed to heat the water to boiling point.
The power of the stove is 2,000 W or 2,000 J/s.
Therefore the energy supplied over 29 min is 2,000 x 1,740 = 3,480,000 J.
So the volume of the water can be determined by Q = m x C x ΔT.
Rearranging, we have m = Q / C x ΔT = 3,480,000 / 4.18 x 80 = 10,486 g = 10.5 kg.
Therefore the volume of the water is V = m / ρ = 10,500 / 1 = 10,500 cm³ (since 1g = 1 cm³ for water).
Hence the volume of the water in the kettle was 10,500 cm³.
Learn more about boiling point here
https://brainly.com/question/1530966
#SPJ11
Radon-222 is a colorless and odorless gas that is radioactive, undergoing alpha-decay with a half-life of 3.8 days. What atom remains after this process? O Carbon-12 O Radium-226 O Polonium-218 O Uranium-238 O Radon-222
Radon-222 is a radioactive, odorless and colorless gas. After undergoing alpha-decay with a half-life of 3.8 days, the atom that remains is Polonium-218.
What is radioactive? Radioactivity is the phenomenon of unstable atomic nuclei splitting or decaying spontaneously. These radioactive materials, also known as radioisotopes, are utilized in numerous applications, such as scientific study, nuclear power generation, and medical therapy. The radionuclide Radon-222 undergoes alpha decay with a half-life of 3.8 days. What happens after the alpha decay of Radon-222?Alpha decay is a type of radioactive decay that occurs when an atomic nucleus loses an alpha particle, a helium nucleus that contains two protons and two neutrons. Radon-222 emits an alpha particle and produces a new nucleus of Polonium-218 with a mass number of 218 (two less than that of the parent nucleus Radon-222). Therefore, after this process, the atom that remains is Polonium-218.
Learn more about Radom-222:
https://brainly.com/question/23972287
#SPJ11
A steel ball with mass 1.00 kg and initial speed 1.00 m/s collides head-on with another ball of mass 7.00 kg that is initially at rest. Assuming that the collision is elastic and one-dimensional, find final speed of the ball that was initially at rest. O 0.29 m/s 0,25 m/s 0.40 m/s O 0.33 m/s 0.22 m/s Three identical masses are located in the (x,y) plane, and have following coordinates: (3.0 m, 3.0 m), (2.0 m, 3.0 m). (3.0 m, 5.0 m). Find the center of mass of the system of these masses. (3.0 m, 4.0 m) (3.3 m, 4.3 m) 1 pts (2.3 m, 3.3 m) O (2.7 m, 3.7 m) O (2.0 m, 3.0 m)
The center of mass of the system of masses is approximately (2.7 m, 3.7 m).
In an elastic collision, both momentum and kinetic energy are conserved. Using the principle of conservation of momentum, we can write the equation: m₁ * v₁i + m₂ * v₂i = m₁ * v₁f + m₂ * v₂f, where m₁ and m₂ are the masses of the two balls, v₁i and v₂i are their initial velocities, and v₁f and v₂f are their final velocities.
In this case, the mass of the first ball is 1.00 kg and its initial velocity is 1.00 m/s. The mass of the second ball is 7.00 kg and its initial velocity is 0 m/s (at rest). Let's assume the final velocity of the second ball is v₂f.
Applying the conservation of momentum equation, we have 1.00 kg * 1.00 m/s + 7.00 kg * 0 m/s = 1.00 kg * v₁f + 7.00 kg * v₂f. Simplifying the equation, we get v₁f + 7v₂f = 1.00 m/s.
Since the collision is elastic, the total kinetic energy before and after the collision remains the same. The kinetic energy before the collision is (1/2) * 1.00 kg * (1.00 m/s)² = 0.50 Joules.
Using the conservation of kinetic energy equation, we can write (1/2) * 1.00 kg * (v₁f)² + (1/2) * 7.00 kg * (v₂f)² = 0.50 Joules. Substituting the values, we have (1/2) * 1.00 kg * (v₁f)² + (1/2) * 7.00 kg * (v₂f)² = 0.50 Joules.
From these equations, we can solve for v₁f and v₂f. The final speed of the ball that was initially at rest (v₂f) is approximately 0.29 m/s.
Moving on to the center of mass calculation, we can find it by taking the average of the x-coordinates and the average of the y-coordinates of the masses.
x-coordinate of the center of mass = (3.0 m + 2.0 m + 3.0 m) / 3 = 2.67 m ≈ 2.7 m
y-coordinate of the center of mass = (3.0 m + 3.0 m + 5.0 m) / 3 = 3.67 m ≈ 3.7 m
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
What are the expected readings of the following in the figure below? (R=9.100,ΔV=5.40 V) (i) (a) ideal ammeter (Give your answer in mA ) D ma (b) ideal voltmeter (Give your answer in volts.) (c) What Ir? How would the readings in the ammeter (in mA) and voltmeter (in volts) change if the 4.50 V. battery was filpped so that its positive rerminal was to the right? ideal ammeter A mA स V ideal voltmeter
Similarly, the voltage measured by the voltmeter also changes sign, i.e, from 5.40V to -5.40V.
(i) (a) Ideal ammeter reading:Ammeter is connected in series with the circuit. It has very low resistance hence it can measure the current flowing through it. The ideal ammeter will have zero internal resistance and will not affect the circuit under test.
Ideal ammeter reading can be obtained using Ohm's law.i.e, V=IRWhere V= voltage, I=current and R=resistanceHere, V=5.40 V and R=9.100I=V/RI= 5.40/9.100 = 0.593 mATherefore, Ideal ammeter reading is 0.593 mA.
(b) Ideal voltmeter reading:Voltmeter is connected in parallel with the circuit. It has very high resistance hence it does not affect the circuit under test. The ideal voltmeter will have infinite internal resistance and will not allow the current to flow through it.
Ideal voltmeter reading is equal to the applied voltage. Here, the applied voltage is 5.40VTherefore, Ideal voltmeter reading is 5.40V.(c) Ir represents the current flowing through the resistor.
Using Ohm's law, we can calculate the value of current flowing through the resistor. V=IRTherefore, IR = V/RIR = 5.40/9.100IR = 0.593 mAIf the 4.50V battery is flipped,
the direction of the current flowing in the circuit gets reversed. Hence, the current measured by the ammeter gets reversed, i.e, from 0.593 mA to -0.593 mA. Similarly, the voltage measured by the voltmeter also changes sign, i.e, from 5.40V to -5.40V.
to know more about voltmeter
https://brainly.com/question/30890633
#SPJ11
A particle is moving along a circle of radius r such that it complete 1 rev in 40 sec. What will be the displacement after 2 mint 20sec?
The displacement of the particle after 2 minutes 20 seconds cannot be determined without knowing the radius of the circle.
To find the displacement of a particle moving along a circle, we need to determine the angle it has covered in a given time.
Given:
Time taken to complete one revolution (T) = 40 seconds
Radius of the circle (r) = r (not provided)
Time for which we need to find the displacement (t) = 2 minutes 20 seconds = 2 * 60 + 20 = 140 seconds
To find the displacement after 2 minutes 20 seconds, we need to calculate the angle covered by the particle during this time.
One revolution (360 degrees) is completed in T seconds. Therefore, the angle covered in 140 seconds can be calculated as follows:
Angle covered = (Angle covered in one revolution) * (Number of revolutions)
Angle covered = (360 degrees) * (Number of revolutions)
To find the number of revolutions in 140 seconds, we can divide 140 by the time taken for one revolution (40 seconds):
Number of revolutions = 140 / 40 = 3.5
Substituting this value into the equation for the angle covered:
Angle covered = (360 degrees) * (3.5) = 1260 degrees
Now, the displacement of the particle can be found using the formula:
Displacement = 2 * pi * r * (Angle covered / 360 degrees)
Learn more about Displacement here :-
https://brainly.com/question/11934397
#SPJ11
In Circuit 64 your voltmeters were accurate in the sense that they (more or less) correctly read the actual voltages in the circuits, but they were inaccurate (for very large resistors) in that these readings are NOT the true voltage across the second resistor when the meter is not there. Now suppose you are in a different setting, with two voltmeters and a high resistance circuit. If meter A "correctly" reads 6.70 volts across a resistor in a circuit and meter B "correctly" reads 6.90V across the same resistor in the same circuit, which meter is giving you the value closest to the true value with no meters present? Explain. (4) 6. The last line of the first column (V1 reading WITHOUT the Simpson) is for the 4.7MQ. Take the value you have and use it to solve for the actual resistance of the Fluke meter. How? Suppose the resistors are both 4.70MQ and use your voltage of the power supply (if you did not write it down, use 3.00V). Remember the question that asked you to find the AV of R* when you knew IR of the other resistor? Well, here you know AV of the parallel combination of R₂ and the meter. "Reverse engineer" things to find the total current from the power supply, then the total resistance (and or you can go directly to find the Reg of the parallel combination, then solve for the meter resistance.
In the given scenario, if meter A correctly reads 6.70 volts across a resistor in a circuit and meter B correctly reads 6.90 volts across the same resistor in the same circuit, meter A is providing a value closer to the true voltage with no meters present.
When using voltmeters in high-resistance circuits, the presence of the voltmeter can affect the actual voltage across the resistor being measured. In this case, we have two voltmeters, A and B, both reading the voltage across the same resistor. If meter A reads 6.70 volts and meter B reads 6.90 volts, we need to determine which value is closer to the true voltage.
Since the voltmeters are accurate in the sense that they correctly read the actual voltages in the circuits, we can infer that the true voltage across the resistor lies between the readings of meters A and B. Considering that meter A reads 6.70 volts and meter B reads 6.90 volts, we can conclude that meter A provides a value closer to the true voltage. This is because the actual voltage is likely slightly lower than the reading on meter B, making meter A's reading more accurate in this case.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11
A cannon is fired over level ground at an angle of 20 degrees to the horizontal. The initial velocity of the cannonball is 400 m/s. What are the vertical and horizontal components of the initial velocity? How long is the cannonball in the air? How far does the cannonball travel horizontally?
The vertical component of the initial velocity is 137.64 m/s, while the horizontal component is 387.88 m/s. The cannonball is in the air for approximately 81.66 seconds. It travels a horizontal distance of about 31,682.46 meters.
To determine the vertical and horizontal components of the initial velocity, we can use trigonometry. The vertical component can be calculated by multiplying the initial velocity (400 m/s) by the sine of the launch angle (20 degrees).
Thus, the vertical component is 400 m/s * sin(20 degrees) = 137.64 m/s. Similarly, the horizontal component can be found by multiplying the initial velocity by the cosine of the launch angle. Hence, the horizontal component is 400 m/s * cos(20 degrees) = 387.88 m/s.
To calculate the time the cannonball is in the air, we need to consider the vertical motion. The time of flight can be determined using the formula t = (2 * v * sinθ) / g, where v is the initial vertical velocity, θ is the launch angle, and g is the acceleration due to gravity (approximately 9.8 m/s²).
Plugging in the values, we get t = (2 * 137.64 m/s) / 9.8 m/s² = 81.66 seconds.The horizontal distance traveled can be found using the formula d = v * cosθ * t, where d is the horizontal distance, v is the initial velocity, θ is the launch angle, and t is the time of flight.
Substituting the given values, we obtain d = 387.88 m/s * cos(20 degrees) * 81.66 s = 31,682.46 meters. Therefore, the cannonball travels approximately 31,682.46 meters horizontally.
Learn more about velocity here ;
https://brainly.com/question/30559316
#SPJ11
Design a class A power amplifier using Vcc= 10V,B=100, R = 1k02, Vth = 3V and Vce = 0.3. 1. Calculate values of R₁, R₂ and R. Calculate load power on load resistance, R.. 2. Convert the amplifier to class B amplifier. . Calculate load power on load resistance, Re. Vcc= 10 V V. RS ww HH CC ww www R₁ R₂ www Re o Do
The question involves designing a Class A power amplifier using given parameters such as Vcc (supply voltage), B (beta or current gain), R (collector resistance), Vth (threshold voltage), and Vce (collector-emitter voltage).
The first part requires calculating the values of R₁, R₂, and R, as well as the load power on the load resistance, R. The second part involves converting the amplifier to a Class B amplifier and calculating the load power on the load resistance, Re.
In the first part of the question, the design of a Class A power amplifier is required. The values of R₁, R₂, and R need to be calculated based on the given parameters. These values are important for determining the biasing and operating point of the amplifier. The load power on the load resistance, R, can also be calculated, which gives an indication of the power delivered to the load.
To calculate R₁ and R₂, we can use the voltage divider equation, considering Vcc, Vth, and the desired biasing conditions. The value of R can be determined based on the desired collector current and Vcc using Ohm's law (R = Vcc / Ic).
In the second part of the question, the amplifier is required to be converted to a Class B amplifier. Class B amplifiers operate in a push-pull configuration, where two complementary transistors are used to handle the positive and negative halves of the input waveform. The load power on the load resistance, Re, needs to be calculated for the Class B configuration. To calculate the load power on Re, we need to consider the output voltage swing, Vcc, and the collector-emitter voltage, Vce. The power delivered to the load can be calculated using the formula P = (Vcc - Vce)² / (2 * Re).
In conclusion, the question involves designing a Class A power amplifier by calculating the values of R₁, R₂, and R, as well as the load power on the load resistance, R. It also requires converting the amplifier to a Class B configuration and calculating the load power on the load resistance, Re. These calculations are important for determining the biasing, operating point, and power delivery characteristics of the amplifier.
Learn more about amplifier here:- brainly.com/question/32812082
#SPJ11
An object is 4 cm from a converging lens with a focal length of 2.5 cm. What is the magnification, including the sign, for the image that is produced? (The sign tells if the image is inverted.) M=−1.67
M=6.67
M=−1.0
M=2.35
The magnification of the image produced by the lens is -0.38.
Magnification of an image refers to how much larger or smaller an image is than the object itself. The formula for magnification is given by;
M = -v / uwhere, M = Magnification of the imagev = Distance of the imageu = Distance of the object
To find the sign of the image, the following formula can be used:
f = Focal length of the lensIf the value of v is negative, it indicates that the image is real and inverted. If the value of v is positive, the image is virtual and erect.
A converging lens has a focal length of 2.5 cm, and the object is 4 cm away from the lens.
u = -4 cm (as the object is real) and
f = 2.5 cm (as the lens is converging)
Now, substitute the given values in the magnification formula to get the magnification.
M = -v / u
M = -(f / (f - u))
M = -(2.5 / (2.5 - (-4)))
M = -2.5 / 6.5M = -0.38
Hence, the magnification of the image produced by the lens is -0.38.
Know more about converging lens here,
https://brainly.com/question/29763195
#SPJ11
Select the correct answer.
In which item is energy stored in the form of gravitational potential energy?
A.
a slice of bread
B.
a compressed spring
C.
an apple on a tree
D.
a stretched bow string
Reset Next
C. an apple on a tree as energy stored in the form of gravitational potential energy.
Gravitational potential energy is a form of energy that an object possesses due to its position in a gravitational field.
It is directly related to the height or vertical position of the object relative to a reference point.
Out of the given options, only the apple on a tree possesses gravitational potential energy because it is located above the ground.
As the apple is raised higher on the tree, its gravitational potential energy increases accordingly.
Thus, option C, "an apple on a tree," is the correct choice.
To learn more about Gravitational potential energy,
https://brainly.com/question/15896499
Blocks of mass m 1
=2.6 kg and m 2
=1.4 kg are attached as shown by a massless inelastic cord over identical massless frictionless pulleys. Consider the pulley attached to m 2
as being part of m 2
. Block m 1
is released from rest and allowed to accelerate downward. Find the acceleration of Block 2. Enter your answer in m/s 2
.
The acceleration of Block 2 is approximately 3.92 [tex]m/s^2[/tex]. The tension in the cord is the same for both blocks. The acceleration of Block 2, we apply Newton's second law to each block individually and consider the tension in the cord.
For Block 1:
The net force acting on Block 1 is the force of gravity acting downward ([tex]m_1[/tex] * g) minus the tension in the cord.
The equation of motion for Block 1 is given by:
[tex]m_1[/tex] * a = [tex]m_1[/tex] * g - T
For Block 2:
The net force acting on Block 2 is the tension in the cord minus the force of gravity acting downward ([tex]m_2[/tex] * g).
The equation of motion for Block 2 is given by:
[tex]m_2[/tex] * a = T - [tex]m_2[/tex] * g
Since the pulley is massless and frictionless, the tension in the cord is the same for both blocks.
We can solve these equations simultaneously to find the acceleration of Block 2.
From the equation for Block 1:
[tex]m_1[/tex] * a = [tex]m_1[/tex] * g - T
T = [tex]m_1[/tex] * g - [tex]m_1[/tex]* a
Substituting T into the equation for Block 2:
[tex]m_2[/tex] * a = ([tex]m_1[/tex] * g - [tex]m_1[/tex] * a) - [tex]m_2[/tex] * g
[tex]m_2[/tex] * a = [tex]m_1[/tex] * g - [tex]m_1[/tex] * a - [tex]m_2[/tex] * g
[tex]m_2[/tex] * a + [tex]m_1[/tex] * a = [tex]m_1[/tex] * g - [tex]m_2[/tex] * g
a * ([tex]m_2[/tex] + [tex]m_1[/tex]) = g * ([tex]m_1[/tex] - [tex]m_2[/tex])
a = g * ([tex]m_1[/tex] - [tex]m_2[/tex]) / ([tex]m_2[/tex] + [tex]m_1[/tex])
Substituting the given values:
a = 9.8 * (2.6 - 1.4) / (1.4 + 2.6)
a ≈ 3.92 [tex]m/s^2.[/tex]
The acceleration of Block 2 is approximately 3.92 [tex]m/s^2.[/tex]
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
Grant jumps 170 m straight up into the air to slam-dunk a basketball into the net. With what speed did he leave the floor?
The speed with which Grant left the floor was 57.7 m/s.
When Grant jumps 170m into the air to slam-dunk a basketball into the net, the speed with which he leaves the floor can be found out by using the conservation of mechanical energy, which is represented by the formula: 1/2 mvi2 + mghi = 1/2 mvf2 + mghf Here, m represents mass, vi represents the initial velocity, vf represents the final velocity, hi represents the initial height, and hf represents the final height. We can consider the initial height to be zero, so h i = 0 m. The final height will be 170 m (as he jumps 170 m high). Hence, h f = 170 m. The initial velocity can be assumed to be zero as the basketball player was on the ground before he jumped. Therefore, vi = 0 m/s. Substituting the values in the formula, we get: 1/2 mvf2 + mghf = 0 + mghf + m × g × 170 vf2 = 2 × g × hf= 2 × 9.8 × 170 vf2 = 3332vf = √3332 = 57.7 m/s. Therefore, the speed with which Grant left the floor was 57.7 m/s.
To know more about grant visit:
https://brainly.com/question/30734311
#SPJ11
How do you get the mass of a star or planet? Kepler's third law Kepler's second law Kepler's first law
To determine the mass of a star or planet, Kepler's third law is used. Kepler's third law states that the square of the orbital period of a planet or satellite is directly proportional to the cube of the semi-major axis of its orbit.
Kepler's third law provides a relationship between the mass of a star or planet and the orbital parameters of its satellites or planets. The law states that the square of the orbital period (T) is directly proportional to the cube of the semi-major axis (a) of the orbit. Mathematically, it can be expressed as T^2 ∝ a^3.
By measuring the orbital period and the semi-major axis of a planet or satellite, we can determine the mass of the star or planet using Kepler's third law. This is possible because the mass of the star or planet affects the gravitational force acting on the orbiting body, which in turn influences its orbital period and semi-major axis.
By observing the motion of satellites or planets around a star or planet and applying Kepler's third law, astronomers can estimate the mass of celestial objects in the universe, providing valuable information for understanding their properties and dynamics.
Learn more about gravitational force here:
https://brainly.com/question/32609171
#SPJ11
What does it cost to cook a chicken for 1 hour in an oven that operates at 20 Ampere Ter 220 Volt if the electric company charge 60 fils per kWh A. 264 Fils B. 528 Fils C. 352 Fils D. 176 Fils through a surface varies with time 1 Ibr
The cost to cook a chicken for 1 hour in the given oven is 264 fils. Option A: 264 Fils. Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light. In brief, voltage = pressure, and it is measured in volts (V).
To calculate the cost of cooking a chicken for 1 hour in the given oven, we need to determine the total energy consumed by the oven during that time and then calculate the cost based on the electric company's charge.
The power consumed by the oven can be calculated using the formula:
Power (P) = Voltage (V) x Current (I)
Given:
Voltage (V) = 220 Volts
Current (I) = 20 Amperes
Using the values, we can calculate the power consumed by the oven:
P = 220 V x 20 A
P = 4400 Watts
To calculate the energy consumed, we need to convert the power from Watts to kilowatts and then multiply it by the time in hours:
Energy (E) = Power (P) x Time (t)
Given:
Time (t) = 1 hour
Converting the power from Watts to kilowatts:
Power (P) = 4400 Watts = 4.4 kilowatts
Calculating the energy consumed:
E = 4.4 kW x 1 hour
E = 4.4 kilowatt-hours (kWh)
Now we can calculate the cost using the electric company's charge:
Cost = Energy (E) x Cost per kWh
Given:
Cost per kWh = 60 fils
Calculating the cost:
Cost = 4.4 kWh x 60 fils/kWh
Cost = 264 fils
To know more about electrons
https://brainly.com/question/12001116
#SPJ11
A dolly speeds up from rest to 3.03 m/s in 3.72 s. The radius of its tires is 0.133 m. How many degrees off from their original angle of rotation are the tires after exactly two seconds of motion? The answer must be an angle in degrees.
The angle of rotation of the tires after two seconds of motion is approximately: Δθ ≈ 45.714 rad * (180° / π) ≈ 261.803°. To determine the angle of rotation of the tires after two seconds of motion, we can first calculate the angular velocity of the tires at that time.
The angular velocity, ω, is given by the formula:
ω = Δθ / Δt,
where Δθ is the change in angle and Δt is the change in time.
Since the dolly starts from rest, its initial angular velocity is 0. Therefore, the change in angle can be found by multiplying the angular velocity by the time:
Δθ = ω * t.
We can find the angular velocity by dividing the linear velocity by the radius of the tires:
ω = v / r,
where v is the linear velocity and r is the radius of the tires.
Given that the linear velocity of the dolly is 3.03 m/s and the radius of the tires is 0.133 m, we can calculate the angular velocity:
ω = 3.03 m/s / 0.133 m ≈ 22.857 rad/s.
Now, we can find the change in angle after two seconds:
Δθ = ω * t = 22.857 rad/s * 2 s = 45.714 rad.
To convert the angle from radians to degrees, we use the conversion factor:
1 rad = 180° / π ≈ 57.296°.
Therefore, the angle of rotation of the tires after two seconds of motion is approximately:
Δθ ≈ 45.714 rad * (180° / π) ≈ 261.803°.
So, the tires are approximately 261.803 degrees off from their original angle of rotation after two seconds of motion.
To know more about the angular velocity
brainly.com/question/30237820
#SPJ11
How long it takes for the light of a star to reach us if the star is at a distance of 8 x 1010km from Earth.
When a star is at a distance of 8 × 1010 km from Earth, it takes about 4.47 years for the light of that star to reach us.
What is light?
Light is electromagnetic radiation visible to the human eye and responsible for sight. Light is electromagnetic radiation, which means that it is a type of energy that travels in waves. When a light wave travels, it carries energy with it. The speed of light is the highest speed in the universe, and nothing travels faster than it. The distance light travels in one year is called a light-year.
What is a star?
A star is a massive, luminous ball of plasma held together by gravity. Stars are essentially self-luminous, producing light through a process known as nuclear fusion, which is the process of combining atomic nuclei to form heavier nuclei. The vast majority of stars are located within galaxies like the Milky Way, and they are responsible for the formation of m
any of the elements found in the universe.
What is the distance of the star from Earth?8 x 1010 km is the distance of the star from Earth. It takes about 4.47 years for the light of that star to reach us.
Learn more about Earth here,
https://brainly.com/question/15205710
#SPJ11
Consider a point on a bicycle tire that is momentarily in contact with the ground as the bicycle rolls across the ground with constant speed. The direction for the acceleration for this point at that moment is: a. upward. b. down toward the ground. c. forward, with the direction of the bicycle's movement. d. at that moment the acceleration is zero. e. backward, against the direction of the bicycle's movement.
So the correct option is d. At that moment, the acceleration of the point on the bicycle tire is zero. Since the bicycle is rolling with constant speed and there is no change in its motion, the point in contact with the ground.
In physics, moment refers to a turning effect or rotational force produced by a force acting on an object. It is the product of the magnitude of the force and the perpendicular distance between the line of action of the force and the pivot point or axis of rotation. Moments are measured in units of newton-meters (Nm) or foot-pounds (ft-lb) and are essential in studying rotational motion, equilibrium, and the principles of torque and angular momentum.
Learn more about moment here:
https://brainly.com/question/27962324
#SPJ11
What is the magnetic field at the center of a single (N=1 turn) circular loop of wire or radius 10 cm carrying a current of 2.5 A ? 2.41×10 −4
T 5.0×10 −6
T 1.57×10 −7
T 3.14×10 −5
T
The magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A is 3.14 × 10-5 T.
Magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A can be calculated using the formula;
B=μ0I/2R
where B is the magnetic field, I is the current flowing, R is the radius of the loop and μ0 is the permeability of free space.The given values are;I = 2.5 AR = 10 cm = 0.1 mμ0 = 4π × 10-7 T m/A.
Substitute the values into the formula; B = μ0I/2R = (4π × 10-7 T m/A) × (2.5 A)/2(0.1 m)= 3.14 × 10-5 T
Therefore, the magnetic field at the center of a single circular loop of wire or radius 10 cm carrying a current of 2.5 A is 3.14 × 10-5 T.
Answer: 3.14×10^−5T.
Know more about Magnetic field here,
https://brainly.com/question/14848188
#SPJ11
A 2.32cm-tall object is placed 5.2 cm in front of a convex mirror with radius of curvafure 21 cm. Part (a) What is the image distance, in centimeters? Include its sign. s’ = ___________
Hints: 0% deduction per hint. Hints remaining : 2 Feedback: 0% deduction per feedback
Part (b) What is the image height, in centimeters? Include its sign.
Part (c) What is the orientation of the image relative to the object?
The image distance is + 2.00 cm and height is - 0.88 cm, inverted image.
Part (a)
Image distance, s′ = ?
We have the object distance (u) = - 5.2 cm
Radius of curvature (R) = + 21 cm (because it is a convex mirror)
We know that the mirror formula is given by:
1/f = 1/v + 1/u
where
f is the focal length of the mirror.
Putting the values of u and R, we get:
1/f = 1/v + 1/R
Since we are not given the focal length, we cannot use the above formula. However, we can use the mirror formula to calculate the image distance which is given as:
s′ = (f * u)/(u + f)s′ = - (R * u)/(u - R) [we know that for a convex mirror, the focal length is negative]
s′ = - (21 * (- 5.2))/(−5.2 − 21)s′ = 2.00 cm
Therefore, the image distance, s′ = + 2.00 cm (since the image is formed on the same side of the mirror as the object, the image distance is positive).
Part (b)
Image height, h′ = ?
The magnification of the image is given by:
- v/u,
where
v is the image distance.
Since the magnification is negative, the image is inverted with respect to the object.
Magnification, m = - v/u = h'/h
where
h' is the image height
h is the object height
Substituting the values, we get:
m = - v/u = h'/h
2.32/h = - 2.00/(- 5.2)
h' = 0.88 cm
The image height, h′ = - 0.88 cm (because the image is inverted)
Part (c)
Orientation of the image relative to the object:
The magnification is negative, which implies that the image is inverted relative to the object.
Learn more about convex mirror:
https://brainly.com/question/31439122
#SPJ11
Calculate the following quantities and write their units in terms of basic units: a) The density when the mass is 2.532 kg and the volume is 162 cm3. b) The volume of a container has a capacity of 2.5 liters. c) The area of a pool has 2km long by 4 km wide.
a) Density is calculated by dividing mass by volume. Density = Mass / Volume = 2.532 kg / 162 cm³. Convert cm³ to m³. Since 1 m = 100 cm, 1 m³ = (100 cm)³ = 1,000,000 cm³.
Density = 2.532 kg / (162 cm³ * (1 m³ / 1,000,000 cm³)) = 15,629.63 kg/m³
b) The volume of the container is given as 2.5 liters. To express it in basic units,Since 1 liter = 0.001 m³, the volume of the container in cubic meters is: Volume = 2.5 liters * 0.001 m³/liter = 0.0025 m³
c) The area of the pool is given as 2 km by 4 km. To express it in basic units, Since 1 km = 1000 m, the area of the pool is:
Area = 2 km * 4 km * (1000 m/km) * (1000 m/km) = 8,000,000 m²
In physics, volume is a fundamental quantity that measures the amount of three-dimensional space occupied by an object or a substance. It is typically measured in cubic units such as cubic meters (m³) or cubic centimeters (cm³), and is an important parameter in various physical calculations and equations.
Learn more about Volume here:
https://brainly.com/question/14197390
#SPJ11
Three resistors are connected in parallel. If their respective resistances are R1 = 23.0 Ω, R2 = 8.5 Ω and R3 = 31.0 Ω, then their equivalent resistance will be:
a) 5.17Ω
b) 96.97Ω
c) 0.193Ω
d) 62.5Ω
The equivalent resistance of three resistors that are connected in parallel with resistances R1 = 23.0 Ω, R2 = 8.5 Ω and R3 = 31.0 Ω is 5.17 Ω.
Therefore, the correct option is a) 5.17Ω.
How to solve for equivalent resistance?
The formula for the equivalent resistance (R) of three resistors (R1, R2, and R3) connected in parallel is given by:
1/R = 1/R1 + 1/R2 + 1/R3
Substituting the given values of R1, R2 and R3 in the above formula:
1/R = 1/23.0 + 1/8.5 + 1/31.0
Simplifying the equation by adding the fractions and then taking the reciprocal of both sides, we get:
R = 5.17 Ω
Therefore, the equivalent resistance of the three resistors connected in parallel is 5.17 Ω.
Explore another question on calculating equivalent resistances: https://brainly.com/question/14883923
#SPJ11
A source emitting a sound at 300.0 Hz is moving towards a stationary observer at 25 m/s. The air temperature is 15°C. What is the frequency detected by the observer?
The frequency detected by the observer is approximately 314.6 Hz.
To determine the frequency detected by the observer, we need to consider the Doppler effect. The formula for the observed frequency (f') in terms of the source frequency (f) and the relative velocity between the source and observer (v) is given by:
f' = f * (v + v₀) / (v + vs)
Where:
f' is the observed frequency
f is the source frequency
v is the speed of sound in air
v₀ is the velocity of the observer
vs is the velocity of the source
First, let's calculate the speed of sound in air at 15°C. The formula for the speed of sound in air is:
v = 331.4 + 0.6 * T
Where:
v is the speed of sound in m/s
T is the temperature in Celsius
Plugging in T = 15°C, we have:
v = 331.4 + 0.6 * 15
v ≈ 340.4 m/s
Now, we can calculate the observed frequency:
f' = 300.0 * (v + v₀) / (v + vs)
f' = 300.0 * (340.4 + 0) / (340.4 + (-25))
f' ≈ 314.6 Hz
To know more about velocity
https://brainly.com/question/30559316
#SPJ11
You are given a black box circuit and you are to apply an input vi(t)=3u(t)V. The voltage response can be described by vo(t)=(5e−8t−2e−5t)V for t≥0. What will be the steady-state response of the circuit if you apply another input voltage described by vi(t)=100cos6t V for t≥0 ?
The steady-state response of the circuit to the input voltage vi(t) = 100cos(6t) V is given by vo(t) = 100*cos(6t + φ) V
To determine the steady-state response of the circuit to the input voltage described by vi(t) = 100cos(6t) V, we need to find the response after transient effects have settled. The given voltage response vo(t) = 5e^(-8t) - 2e^(-5t) V is the transient response for the previous input.
To find the steady-state response, we need to find the particular solution that corresponds to the new input. Since the input is a sinusoidal signal, we assume the steady-state response will also be sinusoidal with the same frequency.
1. Find the steady-state response of the circuit for the new input voltage:
We assume the steady-state response will be of the form vp(t) = A*cos(6t + φ), where A is the amplitude and φ is the phase angle to be determined.
2. Apply the new input voltage to the circuit:
vi(t) = 100cos(6t) V
3. Find the output voltage in the steady-state:
vo(t) = vp(t)
4. Substitute the input and output voltages into the equation:
100cos(6t) = A*cos(6t + φ)
5. Compare the coefficients of the same terms on both sides of the equation:
100 = A (since the cos(6t) terms are equal)
6. Solve for the amplitude A:
A = 100
7. The steady-state response of the circuit for the new input voltage is:
vo(t) = 100*cos(6t + φ) V
Therefore, the steady-state response of the circuit to the input voltage vi(t) = 100cos(6t) V is given by vo(t) = 100*cos(6t + φ) V, where φ is the phase angle that depends on the initial conditions of the circuit.
To know more about input voltage click here:
https://brainly.com/question/33288767
#SPJ11
A train of mass 2 x 10^5 kg moves at a constant speed of 72 kmh-¹ up a straight inclined against a frictional force of 1.28 × 10^4N. The incline is such that the train rises vertically 1.0 m for every 100 m travelled along the incline. Calculate the necessary power developed by the train.
Answer:
100×1.28
Explanation:
hope you like it
Answer:
Approximately [tex]6.5 \times 10^{5}\; {\rm W}[/tex] (assuming that [tex]g = 9.81\; {\rm N\cdot kg^{-1}}[/tex].)
Explanation:
Refer to the diagram attached (not to scale.) Let [tex]\theta[/tex] denote the angle of elevation of the incline. Sine the incline rises [tex]1.0\; {\rm m}[/tex] (opposite) for every [tex]100\; {\rm m}[/tex] along the incline (hypotenuse):
[tex]\displaystyle \sin(\theta) = \frac{(\text{opposite})}{(\text{hypotenuse})} = \frac{1.0}{100}[/tex].
Let [tex]m = 2\times 10^{5}\; {\rm kg}[/tex] denote the mass of the train. Decompose the weight [tex]m\, g[/tex] of the train into two components: along the incline and perpendicular to the incline. Refer to the diagram attached (not to scale):
Weight along the incline: [tex]m\, g\, \sin(\theta)[/tex].Weight perpendicular to the incline: [tex]m\, g\, \cos(\theta)[/tex].Hence, forces on the train along the incline are:
Weight along the incline, [tex]m\, g\, \sin(\theta)[/tex],Friction, andForce driving the train forward.Since the train is moving at a constant velocity, forces on the train should be balanced- both along the incline and perpendicular to the incline.
For forces to be balanced in the component along the incline, the force driving the train upward should be equal to [tex]m\, g\, \sin(\theta) + (\text{friction})[/tex].
Since [tex]\sin(\theta) = (1.0 / 100)[/tex] and [tex](\text{friction}) = 1.28 \times 10^{4}\; {\rm N}[/tex]:
[tex]\begin{aligned} & m\, g\, \sin(\theta) + (\text{friction}) \\ =\; & (2 \times 10^{5})\, (9.81)\, (1.0 / 100) + (1.28 \times 10^{4}) \\ \approx\; & 32420\; {\rm N}\end{aligned}[/tex].
Apply unit conversion and ensure that velocity of the train is in standard units:
[tex]\begin{aligned} v &= 72\; {\rm km\cdot h^{-1}} \times \frac{1000\; {\rm m}}{1\; {\rm km}} \times \frac{1\; {\rm h}}{3600\; {\rm s}} \\ &= 20\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
Power [tex]P[/tex] is the dot product of force [tex]F[/tex] and velocity [tex]v[/tex]. Since the force driving the train forward along the slope is in the same direction as velocity, the power of this force would be:
[tex]\begin{aligned} P &= F\, v \\ &= (32420 \; {\rm N})\, (20\; {\rm m\cdot s^{-1}}) \\ &\approx 6.5 \times 10^{5}\; {\rm W}\end{aligned}[/tex].
A ball is dropped from rest at a height of 81 meters. What's the magnitude of the velocity of the ball as it hits the ground? (Your answer should be in units of meters per second (m/s), but just write down the number part of your answer.)
The magnitude of the velocity of the ball as it hits the ground can be determined using the principles of motion and the equation for the velocity of a falling object. When an object falls freely under the influence of gravity, neglecting air resistance, it undergoes constant acceleration due to gravity, denoted as "g."
The value of acceleration due to gravity on Earth is approximately 9.8 m/s². To calculate the magnitude of the velocity of the ball as it hits the ground, we can use the equation:
v = [tex]\sqrt(2gh)[/tex]
where v represents the velocity, g is the acceleration due to gravity, and h is the initial height from which the ball is dropped.
In this case, the initial height (h) is given as 81 meters. By substituting this value into the equation, we can calculate the magnitude of the velocity.
The equation v = [tex]\sqrt(2gh)[/tex] represents the relationship between the velocity of a falling object and the height from which it is dropped. This equation is derived from the principles of motion and can be applied to objects falling freely under the influence of gravity.
When the ball is dropped from rest, it begins to accelerate due to gravity. As it falls, its velocity increases until it reaches the ground. The magnitude of the velocity at the moment it hits the ground is what we are interested in calculating.
By substituting the given values into the equation, we can find the magnitude of the velocity. The initial height (h) is 81 meters, and the acceleration due to gravity (g) is approximately 9.8 m/s² on Earth. Plugging these values into the equation, we can solve for the magnitude of the velocity.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A magnetic force is measured to be F=(1.70×10−5N)^−(3.70×10−5)^ acts on a particle that has a charge of −2.75nC. The particle is moving in a uniform magnetic field 2.35 T that has its direction in −Z direction. Calculate the velocity of the particle.
Given that,
The magnetic force on a particle is F = 1.70 × 10⁻⁵ N
The charge on the particle is q = -2.75 nC
The magnetic field intensity is B = 2.35 T
The direction of the magnetic field is in the -z direction
The force on a charged particle moving in a magnetic field is given by F = qvB sinθ
where v is the velocity of the particle, B is the magnetic field, q is the charge on the particle, and θ is the angle between v and B
Further, sinθ = 1 as the velocity is perpendicular to the magnetic field.
So, F = qvB
Also, F = m × a (where m is the mass of the particle and a is the acceleration)
We can substitute a/v with v/dt, where dt is the time taken to cross a distance d.
Then F = m × v/dt × Bqvd/dt
= mv²/dt
= Bqm/dt
So, v = Bqm/F = 2.35 × 2.75 × 10⁻⁹/1.70 × 10⁻⁵
= 3.81 × 10⁴ m/s
Therefore, the velocity of the particle is 3.81 × 10⁴ m/s.
Learn more about velocity of particle here
https://brainly.com/question/80295
#SPJ11
A piston cylinder with a cross-sectional size of 0.02 m² and a mass of 100 kg is resting on the stops. With an outside pressure of 140 kPa, what should be the water pressure to lift the piston? (Take g = 9.81 m/s²) O a. 189 kPa O b. 112 kPa O c. 198 kPa O d. 318 kPa
To lift the piston, the water pressure should be 189 kPa.
To solve this problem, we can use the principle of Pascal's law, which states that the pressure applied to a fluid is transmitted uniformly in all directions. Given that the piston cylinder is resting on the stops, it means that the outside pressure (140 kPa) is being applied to the entire cross-sectional area of the piston.
To lift the piston, the water pressure should be equal to or greater than the outside pressure. By applying Pascal's law, we can calculate the water pressure using the formula:
Water Pressure = Outside Pressure + (Weight of the Piston / Area of the Piston)
The weight of the piston can be calculated using the formula:
Weight = Mass * Acceleration due to gravity
Substituting the given values:
Weight = 100 kg * 9.81 m/s² = 981 N
Now, let's calculate the water pressure:
Water Pressure = 140 kPa + (981 N / 0.02 m²) = 140 kPa + 49050 Pa = 140 kPa + 49.05 kPa = 189.05 kPa
Rounded to the nearest whole number, the water pressure required to lift the piston is approximately 189 kPa.
To know more about water pressure click here:
https://brainly.com/question/32181383
#SPJ11
Your brain assumes A. parallel light reflects through the focal point B. light through a focal point reflects parallel C. the angle of incidence equals the angle of reflection D. that light travels in a straight line
The correct answer is D. that light travels in a straight line. The propensity of electromagnetic waves (light) to move in a straight path is known as rectilinear propagation.
The principle that your brain assumes is known as the principle of rectilinear propagation of light. According to this principle, light travels in straight lines in a homogeneous medium unless it encounters an obstacle or undergoes a change in medium. This principle forms the basis for the behavior of light in various optical phenomena such as reflection, refraction, and image formation. When passing through a homogeneous material, which has a constant refractive index throughout, light does not deviate; otherwise, light experiences refraction. The individual rays are flowing in straight lines even if a wave front may be curved (such as the waves produced when a rock strikes a body of water). Pierre de Fermat made the discovery of rectilinear propagation.
To know more about electromagnetic waves
https://brainly.com/question/29774932
#SPJ11