The heat causes the sugar's atoms to combine with the oxygen in the air, forming new groups of atoms. Energy is released in this chemical reaction in the form of smoke and black soot. hope this helps
Sugar is made of carbon, hydrogen, and oxygen atoms. When heated over a candle, these elements react with the fire to turn into a liquid. The heat causes the sugar's atoms to combine with the oxygen in the air, forming new groups of atoms. Energy is released in this chemical reaction in the form of smoke and black soot.
what mass of oxygen is produced when 1.84 mol of h2o2 decompose
calculate the molar solubility of ca(oh)2 in 0.10 m ca(no3)2 (ksp= 1.3x10^-6) in pure water
Ca(OH)₂⇒ Ca²⁺ + 2OH⁻
s s 2s
Ksp = [Ca²⁺][OH⁻]²
Ca(NO₃)₂ ⇒ Ca²⁺ + 2NO₃⁻
0.1 M 0.1 0.2
Input in Ksp
1.3 x 10⁻⁶ = 0.1 . 4s²
s² = 3.25 x 10⁻⁶
s = 1.8 x 10⁻³
1.8 x 10⁻³ is the molar solubility. Solubility is the amount of a substance that can be dissolved in a liquid to form a solution.
What is solubility?Solubility is the amount of a substance that can be dissolved in a liquid to form a solution; it is typically represented as grammes of solute every litre of liquid. One fluid's (liquid or gas) solubility in another can be entire (e.g., methanol and water are completely miscible) or partial (e.g., oil and water barely mix). Generally speaking, "like dissolves like" (for instance, the aromatic hydrocarbons dissolves in one another but not in water).
A material's solubility in two solvents is measured by the distribution coefficient, which is used in some separation techniques (such as absorption and extraction). In general, as temperature rises, so do the dissolution rates of solids in liquids, while they fall as temperature rises and rise with pressure for gases.
Ca(OH)₂⇒ Ca²⁺ + 2OH⁻
s s 2s
Ksp = [Ca²⁺][OH⁻]²
Ca(NO₃)₂ ⇒ Ca²⁺ + 2NO₃⁻
0.1 M 0.1 0.2
1.3 x 10⁻⁶ = 0.1 . 4s²
s² = 3.25 x 10⁻⁶
s = 1.8 x 10⁻³
Therefore, 1.8 x 10⁻³ is the molar solubility.
To know more about solubility, here:
https://brainly.com/question/14366471
#SPJ2
What is a base used in deodorants? sorbitol carrageenan magnesium hydroxide sodium lauryl sulfate
The base used in deodorants is magnesium hydroxide. This is further explained below. Option B is correct.
What is base?Generally, A base is a chemical that reacts with hydrogen ions to neutralize an acid, a base ranges from 7-14 in the pH range
In conclusion, In deodorants, magnesium hydroxide is utilized as a base. The function of the base is to neutralize the acid released in our mouth by bacteria, which causes tooth decay and other associated problems.
Read more about Compound
https://brainly.com/question/704297
Answer:
C. magnesium hydroxide
Explanation:
Edge
Why are engineers an important part of the space exploration team?
----------------------
OPTIONS:
A) They use state-of-the-art technology.
B) They use the information that astronauts gather to make advancements in other fields of science.
C) They design and build spacecraft, space vehicles, and satellites.
D) They help astronauts train for weightlessness and spacewalks.
Why does benzilic acid only precipitate in acidic solution.
Benzilic acid will only precipitate in acidic solution to remove excess acid and restore equilibrium.
What are is chemical equilibrium?Chemical equilibrium refers to a state in which the rate at which reactant molecules combine to form products is equal to the rate at which products dissociate to form reactants.
For a reaction in equilibrium, any change to distort the equilibrium will cause equilibrium to shift to counter that change.
The components of Benzilic acid exist in equilibrium and will only precipitate in acidic solution because more acid has been added and equilibrium will shift to removal of excess acids.
Therefore, benzilic acid only precipitate in acidic solution in order to remove excess acid and restore equilibrium.
Learn more about chemical equilibrium at: https://brainly.com/question/19340344
50 points Acids & Bases
please help me children
#1
HCl+NaOH—»H_2O+NaCl#2
KOH+HNO_3—»KNO_3+HCl#3
H_2CO_3+Mg(OH)_2—»MgCO_3+H_2O#4
Al(OH)_3+HCl—»AlCl_3+H_2O2 Which best describes an acid?
F
A. A soapy substance that is nonreactive
with metals
B. A neutral substance made of oppositely
charged particles
C. A caustic substance that has a high
number on the pH scale
D. A sour liquid that forms gas bubbles
when mixed with copper
D. A sour liquid that forms gas bubblee when mixed with copper
What's oxygen called in an ionic bond.
Answer: Oxide
Explanation:
sneksks ansia soaks s
Answer:
hamburger
yes yes
Explanation:
none lol
derive the electric field at an axial point.
please help
don't spam
Answer:
[tex]\huge\underline{\red{A}\blue{n}\pink{s}\purple{w}\orange{e}\green{r} -}[/tex]
before looking at what the question says ,
let's have some general information related to the topic of the question !
__________________________
[tex]\implies \: [/tex] Electric field refers to the force generated by a nearby charge in the surroundings.
__________________________
[tex]\implies \: [/tex] Mathematically ,
Electric field = [tex]\frac{Kq}{r^{2}} \\[/tex]
where ,
K = coulomb's constant
q = magnitude of charge
r = distance between the opposite terminals
___________________________
[tex]\implies \: [/tex] Dipole moment , P = 2qd
where ,
q = magnitude of charges
d = distance between the charges
___________________________
[tex]\implies \: [/tex] positive charge tends to throw the field away from it while negative charge tends to pull the field towards it !
_____________________________________
seems like enough of information , so now let's look at the derivation !
refer the attachments in order to see the derivation !
Final answer -
[tex]\bold\pink{E = \frac{2kp}{(x {}^{2} - d {}^{2} ) {}^{2} } } \\ [/tex]
while , for a short dipole
[tex]\bold\pink{E = \frac{2pk}{x {}^{3} }} \\ [/tex]
hope helpful :D
The actual electronic structure of the molecule with individual Lewis structure resonance forms is called g
Answer:
The actual electronic structure of the molecule (the average of the resonance forms) is called a resonance hybrid of the individual resonance forms.
Explanation:
hope this help
pls mark brainliest
if all of the finches started on one island, how would speciation (creation of new species) occur on the different island
Answer:
They would be different.
Explanation:
As the finches evolved and moved away from their primary island, they would differentiate and change their species slightly. Maybe color of=r beak shape.
A chemist needs to find the concentration of a solution of barium hydroxide.
Barium hydroxide solution is an alkali.
The chemist could find the concentration of the barium hydroxide solution using two different methods.
Method 1
• An excess of sodium sulfate solution is added to 25 cm3 of the barium hydroxide solution. A precipitate of barium sulfate is formed.
• The precipitate of barium sulfate is filtered, dried and weighed.
• The concentration of the barium hydroxide solution is calculated from the mass of
barium sulfate produced.
Method 2
• 25 cm3 of the barium hydroxide solution is titrated with hydrochloric acid of known concentration.
• The concentration of the barium hydroxide solution is calculated from the result of the titration.
Compare the advantages and disadvantages of the two methods. -5
Method 1: gravimetry
advantages: Impurities in the sample can be identified
disadvantages: The process is long, because it goes through several stages
Method 2: titration
advantages: the process is fast, because the titrate and titrant react immediately
disadvantages: Sometimes the determination of the end point of the titration is carried out too fast or too slowly so that the calculations carried out are inaccurate
why neon is special from other chemical elements
Answer: it has full valence shells
Explanation: Hope this is it
Answer:
Neon, along with helium, argon, krypton and xenon, make up the group known as noble gases. These are the most stable and least reactive elements due to having full valence shells (the outer shell has the max number of electrons, two for helium, eight for the rest).
Explanation:
Hope it helps
PlS MARK BRAINLIEST <3
`
`
`
Tori
Which postulate of daltons atomic model was later changed and why
What is the limiting reactant?
3. 0.20mol AsCl, react with 0.25mol H.O
Answer:
Explanation:
0.20/4 = 0.05 for arsenic trichloide.
0.25/6 = 0.04 for water.
This means that water is the limiting reactant.
Classify each substituent as ortho, para activators; ortho, para deactivators; or meta deactivators.
The activating groups are; -NH2, -NR2 > -OH, -OR> -NHCOR> -CH3. while the deactivating groups are; -NO2, -CF3> -COR, -CO2R, -SO3H > Halogens.
Electrophillic substitutionOwing to the unusual stability of the benzene ring, it does not undergo addition like other unsaturated species, rather benzene does undergo electrophillic substitution.
The substituent groups determine whether the molecule will be activated or deactivated towards electrophilic substitution, the following groups decativate benzene towards electrophilic substitution; -NO2, -CF3> -COR, -CO2R, -SO3H > Halogens. The following groups activate benzene ring towrads electrophilic substitution; -NH2, -NR2 > -OH, -OR> -NHCOR> -CH3.
Learn more about activators and decativators: https://brainly.com/question/9904853
Which of these are functions of the female reproductive system but not the male reproductive system?Select three options.
nourishes a developing baby
produces reproductive cells
protects the developing offspring
serves as place where fertilization takes place
transports reproductive cells
Answer:
Hello! your answer is A,C, and D!
Explanation:
These are things only females would do/have, I hope I helped and good luck!
Have a wonderful day/night!
The enthalpy of combustion for octane (C8H18(l)), a key component of gasoline, is –5074 kJ/mol. The reaction equation is: C8H18(l) + 12.5O2(g) (arrow) 8CO2(g) + 9H2O(g).
What is the (triangle)H (subscript f) for this reaction?
16CO2(g) + 18H2O(g) (arrow) 2C8H18(l) + 25O2(g)
Answer:
10,148 kJ
Explanation:
Did it on Engenuity 2022 and got it right - just double 5074
Answer:
10,148
Explanation:
What is the wavelength of a photon with an energy of 4.56 x 10-19 J?
• A. 502 nm
• B. 436 nm
C. 688 nm
D. 460 nm
Answer:
B
Explanation:
We can use Planck's equation. Recall that:
[tex]\displaystyle E = h\nu[/tex]
Where h is Planck's constant and ν is the frequency.
We also have that:
[tex]\displaystyle \lambda \nu = c[/tex]
Where c is the speed of light and λ is the wavelength. Hence:
[tex]\displaystyle \nu = \frac{c}{\lambda}[/tex]
Therefore:
[tex]\displaystyle E= h\left(\frac{c}{\lambda}\right)[/tex]
Solving for λ yields:
[tex]\displaystyle \lambda = \frac{hc}{E}[/tex]
Hence substitute. Recall that h = 6.626 × 10⁻³⁴ Js and c = 2.998 × 10⁸ m/s:
[tex]\displaystyle \begin{aligned} \lambda & = \frac{(6.626\times 10^{-34}\text{ Js})(2.998\times 10^8\text{ m/s})}{4.56\times 10^{-19} \text{ J}} \left(\frac{1\times 10^9\text{ nm}}{1\text{ m}}\right) \\ \\ & = 436\text{ nm}\end{aligned}[/tex]
In conclusion, our answer is B.
Use the table below to answer questions 3-5.
Molality (m) Potassium
Water
Molality | Potassium | Water
А | 45 g | 1600 g
5.1 | B | 3.2 kg
2.5 | 4.5 moles | C
Calculate the value of A,B and C
Answer:
5.1 | B | 3.2 kg
Explanation:
The quantitative amount of charge separation in a diatomic molecule contributes to the dipole moment of that molecule. A. True B. False
Answer:
The answer is True.
Explanation:
The sentence above is true it all adds up.
Which of the following identifies the part of the solution that is the dissolved substance?
A.
solvent
B.
base
C.
acid
D.
solute
By the way the answer is D if anyone searched this up
Answer: D
Explanation:
This is just a definition.
Methane versus carbon dioxide are very important greenhouse gases. However, methane can retain and release about ____ times more heat than carbon dioxide.
The blank space in the task statement should be filled with 25 as methane can retain 25 times more heat than carbon dioxide.
Heat Retention: Methane and Carbon dioxideMethane, carbon dioxide amongst other gases are important greenhouse gases which allows the Earth retain it's heat in order for it to be habitable.
Methane can retain and release about 25 times more heat than Carbon Dioxide although Methane emissions are lower compared to Carbon Dioxide.
Read more on Greenhouse Gases:
https://brainly.com/question/1878123
What volume of 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid?
Taking into account the definition of dilution, 83.3 mL of 0.0833 Lof 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid.
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.
Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeInitial volumeIn this case, you know:
Ci= 12 MVi= ?Cf= 1 MVf= 1 LReplacing in the definition of dilution:
12 M× Vi= 1 M× 1 L
Solving:
(1 M× 1 L)÷ 12 M= Vi
0.0833 L= 83.3 mL= Vi (being 1 L= 1000 mL)
In summary, 83.3 mL of 0.0833 Lof 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
Part One:
Electromagnetic waves can carry more data at higher frequencies. Why would a scientist opt to transmit data at a lower frequency instead?
What are the limitations of sending information using electromagnetic waves?
What are the differences between analog and digital signals?
What are the advantages of using digital signals over analog signals?
Using reliable internet sources, identify three ways we use analog and digital signals in our everyday lives.
Part Two:
Describe how radio telescopes are used to explore space.
Using reliable internet resources, identify ways we use radio waves on Earth.
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis? (Hint: What did the article say about the advantages of digital signals?)
Electromagnetic waves such as radio waves are used in information transmission either as digital or analogy signals.
What are electromagnetic waves?Electromagnetic waves are waves which are produced from the interactionof the electric and magnetic fields.
Transmitting data at lower frequencies enables the waves to travel longer distances than at higher frequencies, therefore scientists usually transmit data at a lower frequencies.
The limitations of transmitting information using electromagnetic waves include a limited number of broadcast frequencies and interference of waves.
Analog signals differ from digital signals in that analog signals have continuous electrical signals while digital signals have non-continuous electrical signals.
Digital signals over analog signals is that it transmits more information per second than analog signals Analog and digital signals are employed in mobile devices, television, radio, computers and the internet
A radio telescope is used to receive radio waves from astronomical radio sources in space.
It has several parts such as a dish and antenna,a receiver,a detector and an analyzer. The dish collects and focuses radio signals on the antenna and the information is processed by the receiver, detector and analyzer.
Radios waves are used for the transmission of radio and television signals.
Radio telescopes convert radio waves which are analog signals to electrical signals wgich are digital siagnals because it can be easily stored and transmitted in digital form.
Therefore, electromagnetic waves such as radio waves are used in information transmission.
Learn more about electromagnet waves at: https://brainly.com/question/25847009
To convert liquid water into steam, you must break.
What unusual characteristic of water gives it this relatively unique phase diagram? Explain. (Hint: think about molecular structure of solid and liquid water.)
Answer:In water's diagram, the slope of the line between the solid and liquid states is negative rather than positive. The reason is that water is an unusual substance in that its solid state is less dense than the liquid state.
Explanation:
PLEASE HELP
A scientist records measurements of very low pressure and high relative humidity at the top of a mountain. A weather map indicates that a warm front is approaching the mountain. Which conditions would the scientist most likely observe.
Question 4 options:
partly cloudy and calm
very sunny with strong wind
windy and cloudy, with rain likely
very cloudy with violent thunderstorms approaching
What volume of 0.59 M sodium phosphate must be used to make 0.91 L of 2.45 M sodium phosphate?
V1.M1=V2.M2
V1 x 0.59 = 0.91 x 2.45
V1=3.78 L