The calculated t-value of -3.95 is greater in magnitude than the critical t-value of ±1.990, indicating that the students of this school are significantly different in their mathematical abilities compared to the average student in the district.
To determine if the students of this school are significantly different in their mathematical abilities compared to the average student in the district, we can perform a hypothesis test.
Null Hypothesis (H0): The mean score of the students in this school is equal to the average student in the district (μ = 75).
Alternative Hypothesis (Ha): The mean score of the students in this school is significantly different from the average student in the district (μ ≠ 75).
We can use a t-test to compare the sample mean to the population mean. Given a sample size of 80 and a known population standard deviation of 8.1, we can calculate the t-value and compare it to the critical t-value at a 5% level of significance with (80 - 1) degrees of freedom.
t = (sample mean - population mean) / (population standard deviation / √sample size)
t = (71 - 75) / (8.1 / √80)
Calculating the t-value gives us t ≈ -3.95.
Looking up the critical t-value with (80 - 1) degrees of freedom at a 5% level of significance (two-tailed test), we find the critical t-value to be approximately ±1.990.
Since the calculated t-value (-3.95) is smaller in magnitude than the critical t-value (±1.990), we reject the null hypothesis. This indicates that the students of this school are significantly different in their mathematical abilities compared to the average student in the district at a 5% level of significance.
To know more about magnitude:
https://brainly.com/question/31616548
#SPJ4
The reaction A--> B is first order with a half life of 0.935 seconds. What is the rate constant of this reaction in s^-1?
The rate constant of the reaction is 0.740 s^-1.
Given that, The reaction A → B is first order with a half-life of 0.935 seconds. We are to calculate the rate constant of this reaction in s^-1.
Half-life is defined as the time required for the concentration of a reactant to reduce to half its initial value.
It is a characteristic property of the first-order reaction and independent of the initial concentration of the reactant.
The first-order rate law is given by:
k = (2.303 / t1/2 ) log ( [A]0 / [A]t )where, k = rate constantt1/2 = half-lifet = time[A]0 = initial concentration of reactant A[A]t = concentration of reactant A at time t
Substituting the given values in the above equation;
k = (2.303 / t1/2 ) log ( [A]0 / [A]t )
k = (2.303 / 0.935 ) log ( [A]0 / [A]0 / 2 )
k = 0.740 s^-1 (approx)
Therefore, the rate constant of the reaction is 0.740 s^-1.
Learn more about reaction
brainly.com/question/30464598
#SPJ11
Suppose you wish to borrow $800 for two weeks and the amount of interest you must pay is $20 per $100 borrowed. What is the APR at which you are borrowing money? AnswerHow to enter your answer (opens in new window) 2 Points Keyboard Shortcuts
The total interest paid is 6.16
The APR for borrowing the money is 520%.
The APR (Annual Percentage Rate) for borrowing the money is 520%. APR represents the total borrowing cost as a percentage of the borrowed amount. To calculate the APR,
1. Calculate the total interest paid.
2. Divide the total interest paid by the borrowed amount.
3. Multiply the result by the number of payment periods in a year (12 for monthly, 52 for weekly, and 365 for daily).
In this case, you can determine the total interest paid using the formula: I = P x R x T, where:
I represents the interest
P is the principal (amount borrowed)
R is the rate
T is the time
Considering the following values:
P = 800
R = 0.2 (interest rate per 100 borrowed)
T = 2 weeks/52 weeks (number of weeks in a year) = 0.0385
Substituting the values, the calculation is as follows:
[tex]I = 800 x 0.2 x 0.0385 I = 6.16[/tex]
To know more about Annual Percentage Rate visit :
https://brainly.com/question/32636333
#SPJ11
A coin dropped off the top of Q block folls verically with constant acceleration. If s is the distonce of the coin above the ground in meters, t seconds after its release, then s=a+bt^2 where a and b are constants. Suppose the coin is 18 meters above the ground 1 second after its release and 13.2 meters above the ground 2 seconds after release, find a andb. How high is Q-block? How long does the coin foll jor? (Answer: ).
In summary, the values of a and b are a = 19.6 and b = -1.6. The height of the Q-block is 19.6 meters. The coin takes 3.5 seconds to fall to the ground.
The given equation s = a + bt^2 represents the vertical distance of the coin above the ground, s, at time t seconds after its release. In this equation, a and b are constants.
To find the values of a and b, we can use the given information.
At 1 second after its release, the coin is 18 meters above the ground. Substituting these values into the equation, we get:
18 = a + b(1)^2
18 = a + b
At 2 seconds after release, the coin is 13.2 meters above the ground. Substituting these values into the equation, we get:
13.2 = a + b(2)^2
13.2 = a + 4b
We now have a system of two equations with two variables:
18 = a + b
13.2 = a + 4b
Solving this system of equations will give us the values of a and b. Subtracting the second equation from the first, we get:
18 - 13.2 = (a + b) - (a + 4b)
4.8 = -3b
b = -1.6
Substituting the value of b back into the first equation, we can solve for a:
18 = a + (-1.6)
18 + 1.6 = a
19.6 = a
Therefore, the values of a and b are a = 19.6 and b = -1.6.
To find the height of Q-block, we can substitute the value of t = 0 into the equation:
s = 19.6 + (-1.6)(0)^2
s = 19.6
Therefore, the height of the Q-block is 19.6 meters.
To find the time it takes for the coin to fall to the ground, we can set s = 0 and solve for t:
0 = 19.6 + (-1.6)t^2
1.6t^2 = 19.6
t^2 = 19.6 / 1.6
t^2 = 12.25
t = √12.25
t = 3.5
Therefore, the coin takes 3.5 seconds to fall to the ground.
Learn more about variables from the given link!
https://brainly.com/question/28248724
#SPJ11
EXPLORE & REASON Jae makes a playlist of 24 songs for a party. Since he prefers country and rock music, he builds the playlist from those two types of songs. Playlist Country 1 Country 2 Rock 3 Rock 4 Country 5 Rock 6 Country 7 Rock 8 Rock 9 A Country 10 Rock 11 Country 12 need 78% Rock 14 Country 15 ✅Country 16 Rock 17 Rock 18 Country 19 Rock 20 Country 21 Rock 23 Country 24 Country 25 Country 26 A. Determine two different combinations of country and rock songs that Jae could use for his playlist. B. Plot those combinations on graph paper. Extend a line through the points. C. Model With Mathematics Can you use the line to find other meaningful points? Explain. MP.4 2-3 Standard Form HABITS OF MIND Use Appropriate Tools Why is it helpful to use a graph rather than a table to answer the question? Are there any disadvantages to using a graph? C MP.5
Which lines are parallel to 8x + 4y = 5? Selest all that apply.
The lines parallel to 8x + 4y = 5 are: y = –2x + 10, 16x + 8y = 7, y = –2x.
The correct answer is option A, B, C.
To determine which lines are parallel to the line 8x + 4y = 5, we need to compare their slopes. The given equation is in the standard form of a linear equation, which can be rewritten in slope-intercept form (y = mx + b) by isolating y:
8x + 4y = 5
4y = -8x + 5
y = -2x + 5/4
From this equation, we can see that the slope of the given line is -2.
Now let's analyze each option:
A. y = -2x + 10:
The slope of this line is also -2, which means it is parallel to the given line.
B. 16x + 8y = 7:
To convert this equation into slope-intercept form, we isolate y:
8y = -16x + 7
y = -2x + 7/8
The slope of this line is also -2, indicating that it is parallel to the given line.
C. y = -2x:
The slope of this line is -2, so it is parallel to the given line.
D. y - 1 = 2(x + 2):
To convert this equation into slope-intercept form, we expand and isolate y:
y - 1 = 2x + 4
y = 2x + 5
The slope of this line is 2, which is not equal to -2. Therefore, it is not parallel to the given line.
In summary, the lines parallel to 8x + 4y = 5 are options A, B, and C.
For more such information on: parallel
https://brainly.com/question/26961508
#SPJ8
The question probable may be:
User
Which lines are parallel to 8x + 4y = 5? Select all that apply.
A. y = –2x + 10
B. 16x + 8y = 7
C. y = –2x
D. y – 1 = 2(x + 2)
True or false:
Need asap
Answer:
True, i believe
Step-by-step explanation:
Glycerin (cp = 2400 J/kg °C) is to be heated at 20°C and at a rate of 0.5 kg/s by means of ethylene glycol (cp = 2500 J/kg*°C) which is at 70°C. , in a parallel flow, thin wall, double tube heat exchanger. The temperature difference between the two fluids is 15°C at the exchanger outlet. If the total heat transfer coefficient is 240 W/m2 °C and the surface area of this transfer is 3.2 m2, determine by LMTD:
a) the rate of heat transfer,
b) the outlet temperature of the glycerin and
c) the mass expenditure of ethylene glycol.
a) The rate of heat transfer is 24576 W.
b) The outlet temperature of glycerin is 15°C.
c) The mass expenditure of ethylene glycol is 0.178 kg/s.
a) To calculate the rate of heat transfer using the Log Mean Temperature Difference (LMTD) method, we first calculate the LMTD using the formula ∆Tlm = (∆T1 - ∆T2) / ln(∆T1 / ∆T2), where ∆T1 is the temperature difference at the hot fluid inlet and outlet (70°C - 15°C = 55°C) and ∆T2 is the temperature difference at the cold fluid inlet and outlet (20°C - 15°C = 5°C).
Plugging these values into the formula gives us ∆Tlm = (55 - 5) / ln(55/5)
= 31.95°C.
where U is the overall heat transfer coefficient (240 W/m² °C) and A is the surface area (3.2 m²).
Next, we calculate the heat transfer rate using the formula
Q = U × A × ∆Tlm,
Q = 240 × 3.2 × 31.95
= 24576 W.
b) To find the outlet temperature of glycerin, we use the formula ∆T1 / ∆T2 = (T1 - T2) / (T1 - T_out), where T1 is the temperature of the hot fluid inlet (70°C), T2 is the temperature of the cold fluid inlet (20°C), and T_out is the outlet temperature of glycerin (unknown).
Rearranging the formula, we have T_out = T1 - (∆T1 / ∆T2) × (T1 - T2)
= 70 - (55/5) × (70 - 20)
= 70 - 55
= 15°C.
c) To determine the mass flow rate of ethylene glycol, we use the equation Q = m_dot × cp × ∆T, where Q is the heat transfer rate (24576 W), m_dot is the mass flow rate of ethylene glycol (unknown), cp is the specific heat capacity of ethylene glycol (2500 J/kg°C), and ∆T is the temperature difference between the hot and cold fluids (70°C - 15°C = 55°C).
Rearranging the formula, we have m_dot = Q / (cp × ∆T)
= 24576 / (2500 × 55)
= 0.178 kg/s.
Learn more About temperature from the given link
https://brainly.com/question/27944554
#SPJ11
QUESTION 2 A simply supported beam has an effective span of 10 m and is subjected to a characteristic dead load of 8 kN/m and a characteristic imposed load of 5 kN/m. The concrete is a C35. Design the beam section in which located below ground, and the beam wide is limited to 200 mm.
Given that the simply supported beam has an effective span of 10 m and is subjected to a characteristic dead load of 8 kN/m and a characteristic imposed load of 5 kN/m. The concrete is a C35. We have to design the beam section located below the ground, and the beam width is limited to 200 mm.
The section of the beam located below the ground is known as a substructure, and the top of the substructure is called the superstructure or deck.The maximum bending moment at the midspan can be calculated as; M =\frac{w_{total} l^2}{8} Where;w_total = w_dead + w_imposedl = effective span of the beam= 10 m The characteristic dead load is 8 kN/m and the characteristic imposed load is 5 kN/m. Let's assume we use reinforcement bars of 20 mm diameter.Hence, minimum depth required would be, 0.755 + 0.02 = 0.775 m.The section of the beam can be determined by assuming the width and depth of the beam. Let's assume the width of the beam as 200 mm.
Therefore, the effective depth of the beam would be; d = 0.775 \ m We can now calculate the area of the steel required to resist the bending moment using the formula; A_s = \frac{M}{\sigma_{st}jd}
Where;σst = 500 MPa (steel stress at yield)j = 0.9 (reinforcement factor)
A_s = \frac{162.5 \times 10^6}{500 \times 0.9 \times 0.775}
A_s = 475.3 \ mm^2 We can use 4 bars of 20 mm diameter for the steel reinforcement. Therefore, the area of steel we get would be; A_s = 4 \times \frac{\pi}{4} \times 20^2 = 1256.64 \ mm^2 We can use four bars of 20 mm diameter with 200 mm width and 0.775 m depth of the beam to withstand the maximum bending moment. Therefore, the beam section required to withstand the bending moment with a 200 mm width and 0.775 m depth is 4-20 mm diameter bars.
To know more about effective span visit:
https://brainly.com/question/32261594
#SPJ11
Mia and Xan are having a debate. Mia is assigned the affirmative side, and Xan is assigned the negative side. The
debate begins with Mia presenting the affirmative case. Order the steps that the rest of the debate should follow.
Mia asks questions
Mia has final words
Xan asks questions
Xan presents
negative case
Xan gives rebuttal
Mia gives rebuttal
The specific order of these steps may vary depending on the debate format and rules.
The provided order is a typical sequence that is commonly followed in debates.
The order of steps that the rest of the debate should follow is as follows:
Xan presents negative case:
After Mia presents the affirmative case, it is Xan's turn to present the negative case.
Xan will present their arguments and evidence against the affirmative position.
Mia gives rebuttal:
After Xan presents the negative case, Mia will have the opportunity to respond with a rebuttal.
Mia can address the points raised by Xan and counter-argue to support the affirmative position.
Xan gives rebuttal:
Following Mia's rebuttal, it is Xan's turn to provide a rebuttal.
Xan can address the points made by Mia in her rebuttal and counter-argue to support the negative position.
Mia asks questions:
After the rebuttals, Mia has the opportunity to ask questions to Xan.
Mia can use this time to clarify any unclear points, challenge Xan's arguments, or seek further information to strengthen the affirmative position.
Xan asks questions:
Following Mia's questioning period, Xan also has the opportunity to ask questions to Mia.
Xan can use this time to seek clarification, challenge Mia's arguments, or gather additional information to support the negative position.
Mia has final words:
The debate concludes with Mia having the final opportunity to summarize her arguments and reinforce the affirmative position.
Mia can make a closing statement, emphasizing key points, and providing a strong conclusion to support her case.
For similar questions on debate
https://brainly.com/question/30443608
#SPJ8
Derive a general expression to compute (∂S/∂V)T for any gas system.
To derive the expression to calculate (∂S/∂V)T, start by considering the definition of entropy as given by the second law of thermodynamics:ΔS = ∫(dQ/T)where ΔS is the change in entropy, dQ is the heat transfer, and T is the absolute temperature.
However, in the case of a reversible isothermal process, this expression simplifies to:ΔS = Q/TIn an isothermal process, the temperature remains constant, thus the absolute temperature T is also constant.
Therefore, if we take the partial derivative of ΔS with respect to V, we obtain:∂S/∂V = (∂Q/∂V) / TIf we can calculate (∂Q/∂V), then we can determine (∂S/∂V)T for any gas system.
The expression (∂S/∂V)T is known as the isothermal compressibility. It represents the degree to which a substance can be compressed under isothermal conditions. To calculate this value for a gas system, we need to take into account the behavior of the gas molecules as well as the thermodynamic parameters of the system.The behavior of a gas is governed by the ideal gas law, which states:
P V = n R Twhere P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. If we take the derivative of this equation with respect to V, we obtain:P = (n R T) / V².
The pressure P is a measure of the force exerted by the gas molecules on the walls of the container.
If we assume that the force is evenly distributed over the surface area of the container, then we can write:P = F / Awhere F is the total force exerted by the gas molecules and A is the area of the container.
Since the temperature is constant, the force F is also constant.Therefore, (∂Q/∂V) = (∂U/∂V) + Pwhich gives, (∂Q/∂V) = C V (dT/dV) + (n R T) / V²where C V is the heat capacity at constant volume.
Substituting this expression into the equation for (∂S/∂V)T, we get:∂S/∂V = [C V (dT/dV) + (n R T) / V²] / T.
The isothermal compressibility of a gas system can be calculated using the expression (∂S/∂V)T = [C V (dT/dV) + (n R T) / V²] / T, where C V is the heat capacity at constant volume.
To know more about entropy :
brainly.com/question/20166134
#SPJ11
This question is from Hydrographic surveying.
- What sonar systems would you propose to a client who needed to
find a large prop that fell off a container ship?
- What sonar systems would you propose
The answer to the question is to propose a multi-beam echo sounder and a side-scan sonar to a client who wants to locate a large prop that fell off a container ship. These sonar systems are useful in underwater surveys, particularly in oceanographic surveys.
Multibeam echo sounders are used in hydrographic surveys to map the seafloor with high accuracy and precision, with coverage that's much larger than the traditional echo sounders. The main purpose of the system is to give information on water depth, substrate type, and seabed morphology. A multi-beam echo sounder is a type of sonar system that uses sound waves to detect objects in the water.
Side-scan sonar is another type of sonar system that employs sound waves to identify objects on the seabed. It provides images of the seabed and other submerged items that are shown on the computer screen in real-time. It also offers a broad range of coverage in a short amount of time.
The best solution to find a large prop that fell off a container ship would be a combination of both systems since each system provides unique data and benefits.
Learn more about Side-scan sonar: https://brainly.com/question/32870761
#SPJ11
Prepare bank reconciliation for the following: The checkbook balance was $164.68, and the bank statement balance was $605.75. Outstanding checks totaled $459.07. A service charge of $8.00 had been deducted on the bank statement. Determine the reconciled amount. Use \$, comma, and round to cents. Show answer for bank and for checkbook
To prepare the bank reconciliation.The reconciled amount for the bank is $597.75, indicating a positive balance, while the reconciled amount for the checkbook is -$294.39, indicating a negative balance.
To prepare the bank reconciliation, we'll start with the checkbook balance of $164.68 and make adjustments based on the provided information.
The outstanding checks total $459.07, so we subtract this amount from the checkbook balance.
Checkbook balance + Outstanding checks = $164.68 - $459.07 = -$294.39
The service charge of $8.00 was deducted on the bank statement, so we subtract this amount from the bank statement balance.
Bank statement balance - Service charge = $605.75 - $8.00 = $597.75
The reconciled amount for the bank is $597.75, and for the checkbook is -$294.39.
Learn more about bank reconciliation
brainly.com/question/15525383
#SPJ11
Calculate the The maximum normal stress in steel a plank and ONE 0.5"X10" steel plate. Ewood 20 ksi and E steel-240ksi Copyright McGraw-Hill Education Permission required for reproduction or display 10 in. 3 in. in. 3 in.
The maximum normal stress in the steel plank is 5 lbf/in², and the maximum normal stress in the 0.5"X10" steel plate is 30 lbf/in².
To calculate the maximum normal stress in a steel plank and a 0.5"X10" steel plate, we need to consider the given information: Ewood (modulus of elasticity of wood) is 20 ksi and Esteel (modulus of elasticity of steel) is 240 ksi.
To calculate the maximum normal stress, we can use the formula:
σ = P/A
where σ is the stress, P is the force applied, and A is the cross-sectional area.
Let's calculate the maximum normal stress in the steel plank first.
We have the dimensions of the plank as 10 in. (length) and 3 in. (width).
To find the cross-sectional area, we multiply the length by the width:
A_plank = length * width = 10 in. * 3 in. = 30 in²
Now, let's assume a force of 150 lb is applied to the plank.
Converting the force to pounds (lb) to pounds-force (lbf), we have:
P_plank = 150 lb * 1 lbf/1 lb = 150 lbf
Now we can calculate the maximum normal stress in the steel plank:
σ_plank = P_plank / A_plank
σ_plank = 150 lbf / 30 in² = 5 lbf/in²
The maximum normal stress in the steel plank is 5 lbf/in².
Now let's move on to calculating the maximum normal stress in the 0.5"X10" steel plate.
The dimensions of the plate are given as 0.5" (thickness) and 10" (length).
To find the cross-sectional area, we multiply the thickness by the length:
A_plate = thickness * length = 0.5 in. * 10 in. = 5 in²
Assuming the same force of 150 lb is applied to the plate, we can calculate the maximum normal stress:
σ_plate = P_plate / A_plate
σ_plate = 150 lbf / 5 in² = 30 lbf/in²
The maximum normal stress in the 0.5"X10" steel plate is 30 lbf/in².
So, the maximum normal stress in the steel plank is 5 lbf/in², and the maximum normal stress in the 0.5"X10" steel plate is 30 lbf/in².
Learn more about modulus of elasticity from this link:
https://brainly.com/question/31083214
#SPJ11
a. Order the following compounds from lowest boiling point to highest boiling point:
Ammonia (NH3) Methane (CH3) Ethanol (CH3OH) octane (C8H10)
b. What is the difference in intermolecular forces (IMFs) in methane and octane?
c. What intermolecular force (IMFs) is present in both ammonia and ethanol?
a. The order of boiling points is methane < ammonia < ethanol < octane.
b. Methane and octane have London Dispersion forces.
c. Ammonia and Ethanol have hydrogen bonding.
a. The boiling point of a substance increases with the strength of its intermolecular forces. The weakest IMF is London Dispersion, followed by Dipole-Dipole, and the strongest IMF is Hydrogen Bonding. Therefore, the order of boiling points is methane < ammonia < ethanol < octane.
b. Both methane and octane are nonpolar and have London Dispersion forces. However, octane is larger and has more electrons, so its London Dispersion forces are stronger. As a result, octane has a higher boiling point than methane.
c. Both ammonia and ethanol have Hydrogen Bonding. In hydrogen bonding, a hydrogen atom bonded to an electronegative atom (N, O, or F) is attracted to another electronegative atom of another molecule. In ammonia, the hydrogen atom is bonded to nitrogen, while in ethanol, it is bonded to oxygen. Therefore, both compounds have Hydrogen Bonding as their strongest intermolecular force.
Learn more about intermolecular force here:
https://brainly.com/question/29388558
#SPJ11
The W21 x 201 columns on the ground floor of the 5-story shopping mall project are fabricated by welding a 12.7 mm by 100 mm cover plate to one of its flanges. The effective length is 4.60 meters with respect to both axes. Assume that the components are connected in such a way that the member is fully effective. Use A36 steel. Compute the column strengths in LRFD and ASD based on flexural buckling.
The W21 x 201 columns on the ground floor of the shopping mall project are fabricated by welding a 12.7 mm by 100 mm cover plate to one of its flanges. The effective length of the column is 4.60 meters with respect to both axes. The column is made of A36 steel. We need to compute the column strengths in LRFD and ASD based on flexural buckling.
To compute the column strengths, we first need to determine the critical buckling load. The critical buckling load is the load at which the column will buckle under compression.
In LRFD (Load and Resistance Factor Design), the column strength is calculated as the resistance factor times the critical buckling load. The resistance factor for A36 steel in compression is 0.90.
In ASD (Allowable Stress Design), the column strength is calculated as the allowable stress times the cross-sectional area of the column. The allowable stress for A36 steel is 0.60 times the yield strength.
To calculate the critical buckling load, we need to determine the effective length factor (K) and the slenderness ratio (λ). The effective length factor (K) depends on the end conditions of the column. In this case, since the column is fully effective, the effective length factor is 1.0 for both axes.
The slenderness ratio (λ) is calculated by dividing the effective length of the column by the radius of gyration (r). The radius of gyration can be determined using the formula:
[tex]r = \sqrt{(I/A)}[/tex]
Where I is the moment of inertia of the column and A is the cross-sectional area of the column.
Once we have the slenderness ratio (λ), we can use it to calculate the critical buckling load using the following formula:
[tex]Pcr = (\pi ^2 * E * I) / (K * L)^2\\[/tex]
Where E is the modulus of elasticity of the steel, I is the moment of inertia, K is the effective length factor, and L is the effective length of the column.
Finally, we can calculate the column strength in LRFD and ASD.
In LRFD:
Column strength = Resistance factor * Critical buckling load
In ASD:
Column strength = Allowable stress * Cross-sectional area of the column
By following these steps, we can compute the column strengths in LRFD and ASD based on flexural buckling for the given shopping mall project.
To know more about FABRICATED: https://brainly.com/question/30525487
#SPJ11
Question 5 Explain, with reference to the local real estate market characteristics, why the principle of demand and supply operates differently. [10 marks]
In real estate, the principle of supply and demand operates differently in every location. This is due to various characteristics of the local market, which impact the balance between supply and demand.
Here are some factors that can influence how supply and demand work in a local real estate market:
Location: The location of a property is one of the most important factors that determine the demand for real estate. The proximity to city centers, schools, and transportation hubs can all impact how attractive a property is to buyers. Climate can also play a role in demand, as warmer climates tend to be more popular and have a higher demand for real estate in those areas.Economy: The economic condition of an area can impact the demand for real estate. In cities where there are a lot of job opportunities, the demand for housing tends to be higher. In contrast, in areas where unemployment is high, demand for housing may be lower. This is because people can’t afford to buy or rent a property when they have no income.Availability of land: Land availability is also a significant factor in the real estate market. In some areas, the supply of land may be limited, which can increase demand for the available land. This can cause prices to rise, making it difficult for some buyers to enter the market. In other areas, land may be abundant, causing prices to drop and resulting in lower demand.Know more about the real estate
https://brainly.com/question/1534216
#SPJ11
For the following equilibrium, indicate which of the following actions would NOT disturb the equilibrium:
HNO2 (aq)+H2O(l)<= H3O^ + (aq)+NO2^- (aq)
a) Add HNO2
b) Increase the concentration of H30
c) Add NaNO2
d) Decrease the concentration of NO2^- e) Add NaNO3(s)
For the given equilibrium: HNO₂ (aq)+H₂O(l) ⇌ H₃O⁺ (aq)+NO₂⁻ (aq) option (b) Increase the concentration of H₃O⁺ would NOT disturb the equilibrium.
The increase in H₃O⁺ ion concentration would result in the shift of the equilibrium towards NO₂⁻ and H₃O⁺ ions. Since the increase in the H₃O⁺ ion concentration occurs on the products' side of the equation, the shift will oppose the change, resulting in the formation of HNO₂ and H₂O, bringing the system back to equilibrium. This change will result in the establishment of a new equilibrium position with a higher concentration of NO₂⁻ and H₃O⁺ ions. The change in concentration, pressure, and temperature causes the system to shift to a new equilibrium position. These factors result in a change in the rate of forward and reverse reactions, which will affect the concentration of reactants and products.
Concentration changes can occur due to adding or removing a reactant or a product, while pressure changes can occur due to a change in the volume of the container. Temperature changes can occur due to the heating or cooling of the reaction vessel.
Option (a) Add HNO₂: Adding more HNO₂, a reactant, would result in the equilibrium shifting towards the products' side to achieve equilibrium. The addition of HNO₂ would increase the concentration of HNO₂, decreasing the concentration of NO₂⁻ ions. The shift will continue until a new equilibrium position is established, leading to more H₃O⁺ ions and NO₂⁻ ions.
Option (c) Add NaNO₂: NaNO₂ is a salt that has no effect on the reaction, as it is a spectator ion. The addition of NaNO₂ would cause no disturbance in the equilibrium of the reaction.
Option (d) Decrease the concentration of NO₂⁻: The decrease in the concentration of NO₂⁻ would cause the equilibrium to shift towards NO₂⁻ ions' side to achieve equilibrium. The decrease in the concentration of NO₂⁻ ions would increase the concentration of HNO₂ and H₂O molecules. The equilibrium would shift towards the side with fewer products to compensate for the change.
Option (e) Add NaNO₃(s): The addition of NaNO₃(s) would not cause any effect on the equilibrium of the reaction as it is in the solid state. The reaction would continue to maintain its equilibrium position.
To know more about concentration, visit:
brainly.com/question/30862855
#SPJ11
Enter your answer in the provided box. Calculate the pH of a buffer solution in which the acetic acid concentration is 5.6 x 10¹ M and the sodium acetate concentration is 1.6 × 10¹ M. The equilibrium constant, K, for acetic acid is 1.8 × 105. pH=
The pH of the buffer solution is 4.74. This pH is calculated using the Henderson-Hasselbalch equation with the given concentrations of acetic acid and sodium acetate.
To calculate the pH of the buffer solution, we need to consider the dissociation of acetic acid and the reaction with sodium acetate. Acetic acid partially dissociates in water, releasing hydrogen ions (H+):
CH3COOH ⇌ CH3COO- + H+
The equilibrium constant (K) for this dissociation is given as 1.8 × 105. This means that the concentration of the acetate ion (CH3COO-) will be much larger than the concentration of hydrogen ions.
Sodium acetate, on the other hand, completely dissociates in water, releasing acetate ions (CH3COO-) and sodium ions (Na+):
CH3COONa ⇌ CH3COO- + Na+
The acetate ions from sodium acetate act as a conjugate base and react with any added acid (H+) to form acetic acid (CH3COOH), thereby preventing a significant change in pH.
The pH of a buffer solution can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Where pKa is the negative logarithm of the acid dissociation constant (Ka) for acetic acid, [A-] is the concentration of the conjugate base (CH3COO-), and [HA] is the concentration of the weak acid (CH3COOH).
In this case, the pKa value for acetic acid is determined by taking the negative logarithm of the equilibrium constant (K):
pKa = -log(K) = -log(1.8 × 105) = 4.74
Since the concentration of the acetate ions (CH3COO-) is given as 1.6 × 10¹ M and the concentration of the weak acid (CH3COOH) is given as 5.6 × 10¹ M, we can substitute these values into the Henderson-Hasselbalch equation:
pH = 4.74 + log(1.6 × 10¹/5.6 × 10¹) = 4.74 + log(0.286) = 4.74 - 0.544 = 4.196 ≈ 4.74
Therefore, the pH of the buffer solution is approximately 4.74.
Learn more about pH of the buffer solution
brainly.com/question/16023983
#SPJ11
PLEASE HELP!!
Step 3: If you took an inventory of your house 200 years ago, would more or fewer items come from your home country?
Step 4: How has transportation helped shape what we buy?
Step 5: How have labor costs helped shape what we buy?
Part B
Directions: Read the definition of trade balance below. Use the graph to calculate the Trade Balance for 1850, 1900, 1950, and 2000.
Definition: The trade balance is the cost of the imports subtracted from the exports. The chart below shows information about the United States. Use what you just learned about imports, exports, and trade balance to complete the chart. The first one has been done for you.
Hint: Subtract the import from the export. If the 'import' is greater than the 'export' your answer will be a negative number, because the U.S. imported more goods than were exported.
Trade Balance:
1. 1800 = -20
2. 1850 = ?
3. 1900 = ?
4. 1950 = ?
5. 2000 = ?
Which inequality has a solid boundary line when graphed?
y<-x-9
y< 1/9x+9
y>-1/9x
y>=9x+9
The inequality that has a solid boundary line when graphed is y ≥ 9x + 9 (option d).
1. The inequality y < -x - 9 has a dashed boundary line when graphed. The symbol "<" indicates that the line is not included in the solution set, hence the dashed line.
2. The inequality y < (1/9)x + 9 also has a dashed boundary line when graphed. Similar to the previous inequality, the "<" symbol implies that the line is not part of the solution set, resulting in a dashed line.
3. The inequality y > -(1/9)x does not have a solid boundary line when graphed. The ">" symbol signifies that the line is not included in the solution set, resulting in a dashed line.
4. The inequality y ≥ 9x + 9 has a solid boundary line when graphed. The "≥" symbol indicates that the line is part of the solution set, leading to a solid line.
Graphically, the solid boundary line in the fourth inequality represents all the points on the line itself, including the line. The inequality y ≥ 9x + 9 includes all the points above and on the line.
For more such questions on inequality, click on:
https://brainly.com/question/30238989
#SPJ8
Consider a glass window 1.5 m high and 2.4 m wide, whose thickness is 3 mm and the thermal conductivity is k = 0.78 W/mK, separated by a 12 mm layer of stagnant air. (K=0.026 W/mk) Determine the steady-state heat transfer rate through this double-glazed window and the internal surface temperature when the room is kept at 21°C while the outside temperature is 5°C. the convective heat transfer coefficients on the inner and outer surface of the window are, respectively, h1 = 10 W/m^2K and h2 = 25 W/m^2K. ignore any heat transfer by radiation
You can calculate the steady-state heat transfer rate through the double-glazed window and the internal surface temperature. Make sure to use the given values for the dimensions, thermal conductivity, and convective heat transfer coefficients in the calculations.
To determine the steady-state heat transfer rate through the double-glazed window and the internal surface temperature, we can use the concept of thermal resistance. The heat transfer through the window can be divided into three parts: conduction through the glass, convection on the inner surface, and convection on the outer surface.
First, let's calculate the thermal resistance for each part. The thermal resistance for conduction through the glass can be calculated using the formula R = L / (k * A), where L is the thickness of the glass (3 mm), k is the thermal conductivity of the glass (0.78 W/mK), and A is the area of the glass (1.5 m * 2.4 m).
Next, we calculate the thermal resistance for convection on the inner surface using the formula R = 1 / (h1 * A), where h1 is the convective heat transfer coefficient on the inner surface (10 W/m^2K).
Similarly, the thermal resistance for convection on the outer surface can be calculated using the formula R = 1 / (h2 * A), where h2 is the convective heat transfer coefficient on the outer surface (25 W/m^2K).
Once we have the thermal resistances for each part, we can calculate the total thermal resistance (R_total) by summing up the individual thermal resistances.
Finally, the steady-state heat transfer rate (Q) through the double-glazed window can be calculated using the formula Q = (T1 - T2) / R_total, where T1 is the inside temperature (21°C) and T2 is the outside temperature (5°C).
The internal surface temperature can be calculated using the formula T_internal = T1 - (Q * R_inner), where R_inner is the thermal resistance for convection on the inner surface.
learn more about heat transfer rate
https://brainly.com/question/33407501
#SPJ11
The system of equations 2x - 3y-z = 10, -x+2y- 5z = -1, 5x-y-z = 4 has a unique solution. Find the solution using Gaussin elimination method or Gauss-Jordan elimination method. x= y = z
The unique solution of the given system of equations is x = 4,
y = 1, and
z = 2.
Given system of equations is as follows.2x - 3y - z = 10 ..........(1)
-x + 2y - 5z = -1 ..........(2)
5x - y - z = 4 ...........(3)
To find: Solution of given system of equation using Gaussian elimination method or Gauss-Jordan elimination method and x = y = z.
Solution: Let us find the solution of the given system of equations using Gaussian elimination method. Step 1: Write the augmented matrix for the given system of equations.
[2 -3 -1 10] [-1 2 -5 -1] [5 -1 -1 4]
Step 2: We will perform the following row operations in order to obtain the row echelon form of the matrix:
R2 + (1/2) R1 → R1R3 - 5R1 → R1[1 -2 5 -1] [0 5/2 -7/2 9/2] [0 7 -24 14]
Step 3: We now perform further row operations in order to obtain the reduced row echelon form of the matrix.
R2 × (2/5) → R2R2 + 7R1 → R1R3 - 24R2 → R2[1 0 0 3] [0 1 0 1] [0 0 1 2]
The system of equation in row echelon form is,
x = 3y - z + 3 ........(4)
y = y .................(5)
z = 2 ..................(6)
From (5), we get
y = y
⇒ 0 = 0
This implies that y can be any value, but we take y = 1. From (6), we get
z = 2
Substituting y = 1 and
z = 2 in equation (4), we get,
x = 3y - z + 3
⇒ x = 3(1) - 2 + 3
⇒ x = 4
Thus, the solution of the given system of equations is x = 4,
y = 1, and
z = 2.
To know more about unique visit
https://brainly.com/question/1594636
#SPJ11
The ages of a group of 146 randomly selected adult females have a standard deviation of 17.5 years. Assume that the ages of female statistics students have less variation than ages of females in the general population, so let σ=17.5 years for the sample size calculation. How many female statistics student ages must be obtained in order to estimate the mean age of all female statistics students? Assume that we want 90% confidence that the sample mean is within one-half year of the population mean. Does it seem reasonable to assume that the ages of female statistics students have less variation than ages of females in the general population? The required sample size is (Round up to the nearest whole number as needed.)
According to the information given, rounding up to the nearest whole number, the required sample size is 3314.
To determine the required sample size for estimating the mean age of all female statistics students, we can use the formula:
n = [(Z * σ) / E]^2
Where:
n = required sample size
Z = Z-score corresponding to the desired confidence level (in this case, 90% confidence)
σ = assumed standard deviation
E = margin of error
In this case, the margin of error is 0.5 years.
Given information:
σ = 17.5 years
Desired confidence level = 90%
Margin of error (E) = 0.5 years
First, let's find the Z-score corresponding to a 90% confidence level. For a 90% confidence level, the Z-score is approximately 1.645.
Now, let's calculate the required sample size:
n = [(1.645 * 17.5) / 0.5]^2
Calculating the numerator, we have:
(1.645 * 17.5) ≈ 28.788
Dividing the numerator by the margin of error (0.5), we get:
28.788 / 0.5 ≈ 57.576
Finally, squaring the result, we have:
57.576^2 ≈ 3313.536
Therefore, we would need to obtain a sample size of approximately 3314 female statistics student ages to estimate the mean age of all female statistics students with 90% confidence and a margin of error of one-half year.
As for whether it seems reasonable to assume that the ages of female statistics students have less variation than ages of females in the general population, it depends on the specific context and characteristics of the population. The given information assumes that the ages of female statistics students have less variation, but without further information or data, it is difficult to definitively conclude. A more comprehensive analysis and comparison of the variability in ages between the two groups would be required to make a more informed determination.
Learn more about sample size:
https://brainly.com/question/17203075
#SPJ11
Which enzyme(s) of glycolysis, the bridge, citric acid cycle, and β-oxidation is/are involved in an oxidation reduction reaction?
2.. Which enzyme(s) of glycolysis, the bridge, citric acid cycle, and β-oxidation is/are involved in substrate-level phosphorylation reactions?
3. Which enzyme(s) of glycolysis, the bridge, citric acid cycle, and β-oxidation is/are involved in a dehydration reaction?
4. Citric acid cycle, electron transport chain, and oxidative phosphorylation operate together in ___________________metabolism.
5. What is the RNA transcript of the DNA coding strand: 5’- TAT ATG ACT GAA - 3’?
6. Translate this into its peptide form (give the one- and three- letter codes)
1. In glycolysis, the enzyme involved in an oxidation-reduction reaction is glyceraldehyde-3-phosphate dehydrogenase. This enzyme catalyzes the conversion of glyceraldehyde-3-phosphate to 1,3-bisphosphoglycerate, while also reducing NAD+ to NADH.
2. In glycolysis, the enzyme involved in substrate-level phosphorylation reactions is phosphoglycerate kinase. This enzyme catalyzes the transfer of a phosphate group from 1,3-bisphosphoglycerate to ADP, forming ATP and 3-phosphoglycerate.
3. In the bridge reaction, the enzyme involved in a dehydration reaction is pyruvate dehydrogenase complex. This enzyme complex catalyzes the conversion of pyruvate to acetyl-CoA, releasing carbon dioxide and reducing NAD+ to NADH in the process.
4. The Citric Acid Cycle (also known as the Krebs cycle) operates together with the Electron Transport Chain (ETC) and Oxidative Phosphorylation to carry out aerobic metabolism. The Citric Acid Cycle generates high-energy molecules (NADH and FADH2) that are then used by the Electron Transport Chain to produce ATP through oxidative phosphorylation.
5. The RNA transcript of the DNA coding strand 5’-TAT ATG ACT GAA-3’ would be 5’-UAU AUG ACU GAA-3’.
6. The peptide form of the RNA transcript "UAU AUG ACU GAA" using one-letter and three-letter codes for the amino acids would be:
- UAU: Tyrosine (Y) - AUG: Methionine (M) - ACU: Threonine (T) - GAA: Glutamic Acid (E)
To know more about enzyme :
https://brainly.com/question/31385011
#SPJ11
1.) In this method internal columns are assumed to be twice as stiff than external columns .
A)None of the other choice B)Factor Method
C)Portal Method
D)Cantilever Method
A fixed base may be used if the ground is stable and if the structure is not too high. The method is applied to framed structures where the frame has sufficient rigidity against sway, and it allows for the frame to be analyzed as a series of cantilevers.
The method in which internal columns are assumed to be twice as stiff as external columns is the Cantilever Method.
Cantilever Method This is a method used for structural analysis and design of continuous beams and structures. This method has two main assumptions, which are:
Internal columns are assumed to be twice as stiff as external columns.External columns carry all the axial loads and half of the bending moments.Portable frames with a maximum of 3 stories and a simple layout are typically evaluated using the Cantilever Method.
The total lateral load is taken up by a series of cantilevers, which are isolated from one another.A fixed base may be used if the ground is stable and if the structure is not too high. The method is applied to framed structures where the frame has sufficient rigidity against sway, and it allows for the frame to be analyzed as a series of cantilevers.
To know more about cantilevers visit:
https://brainly.com/question/29290377
#SPJ11
Let
A and B both be the set of natural numbers. Define a relation R by
(a,b) element of R if and only if a = b^k for some positive integer
k.
Relation reflexive?
Relation symmetric?
Relation transiti
- The relation R is reflexive because every element is related to itself.
- The relation R is symmetric because if a is related to b, then b is related to a.
- The relation R is transitive because if a is related to b and b is related to c, then a is related to c.
Let A and B both be the set of natural numbers. We are asked to determine whether the relation R, defined as (a, b) ∈ R if and only if a = b^k for some positive integer k, is reflexive, symmetric, and transitive.
1. Reflexive:
A relation is reflexive if every element of the set is related to itself. In this case, we need to check if (a, a) ∈ R for all a in A.
To be in R, a must equal b^k for some positive integer k. When a = a, we can see that a = a^1, where a^1 is equal to a raised to the power of 1.
Since a is related to itself through a^1 = a, the relation R is reflexive.
2. Symmetric:
A relation is symmetric if whenever (a, b) ∈ R, then (b, a) ∈ R. We need to check if for all a, b in A, if a = b^k, then b = a^m for some positive integers k and m.
Let's assume a = b^k for some positive integer k. We can rewrite this equation as b = a^(1/k), where 1/k is the reciprocal of k. Since k is a positive integer, 1/k is also a positive integer.
Therefore, we can see that if a = b^k, then b = a^(1/k), and thus (b, a) ∈ R. This means the relation R is symmetric.
3. Transitive:
A relation is transitive if whenever (a, b) ∈ R and (b, c) ∈ R, then (a, c) ∈ R. We need to check if for all a, b, c in A, if a = b^k and b = c^m for some positive integers k and m, then a = c^n for some positive integer n.
Assuming a = b^k and b = c^m, we can substitute the value of b from the first equation into the second equation:
a = (c^m)^k = c^(mk).
Since mk is a positive integer (as the product of two positive integers), we can see that a = c^(mk), and thus (a, c) ∈ R. This confirms that the relation R is transitive.
To know more about "Relation":
https://brainly.com/question/15828363
#SPJ11
1/5 de los animales en el zoológico son monos 5/7 de los monos son machos
¿Qué fracción de los animales en el zoológico son monos machos?
1/7 of the animals in the zoo are male monkeys.
What fraction of the animals in the zoo are male monkeys? Explain with workings.
To find the fraction of animals in the zoo that are male monkeys, we have to calculate the product of the fractions representing the proportion of monkeys and the proportion of male monkeys among them.
Given that 1/5 of the animals in the zoo are monkeys, we will then represent this as:
= 1/5
= 5/25.
And 5/7 of the monkeys are male which is written as 5/7.
To get fraction of male monkeys, we will multiply these two fractions:
= (5/25) * (5/7)
= 25/175
= 1/7.
Full question:
1/5 of the animals in the zoo are monkeys 5/7 of the monkeys are male. What fraction of the animals in the zoo are male monkeys?
Read more about fraction
brainly.com/question/17220365
#SPJ1
a) Use MATLAB's backslash function to solve the following system of equations: X1 + 4x2 -2x3 + 3x4 = 3 = -X1 + 2x3 = 4 X1 +2x2-3x3 = 0 X1 -2x3 + x4 = 3 = b) Now use MATLAB's inverse function to solve the system.
disp(x) will display the values of x₁, x₂, x₃ and x₄.
To solve the given system of equations using MATLAB's backslash operator and inverse function, you can follow these steps:
Step 1:
Define the coefficient matrix (A) and the right-hand side vector (b):
A = [1, 4, -2, 3; -1, 0, 2, 0; 1, 2, -3, 0; 1, 0, -2, 1];
b = [3; 4; 0; 3];
Step 2: Solve the system using the backslash operator ():
x = A \ b;
The solution vector x will contain the values of x₁, x₂, x₃, and x₄.
Step 3: Display the solution:
disp(x);
This will display the values of x₁, x₂, x₃, and x₄.
To solve the system using the inverse function, you can follow these steps:
Step 1: Calculate the inverse of the coefficient matrix ([tex]A_{inv[/tex]):
[tex]A_{inv[/tex] = inv(A);
Step 2: Multiply the inverse of A with the right-hand side vector (b) to obtain the solution vector (x):
x = [tex]A_{inv[/tex] * b;
Step 3: Display the solution:
disp(x);
This will display the values of x₁, x₂, x₃, and x₄.
To know more about coefficient, visit
https://brainly.com/question/13431100
#SPJ11
6-4 Put A = {n € Z+ | 1/(n + 1) € Z}. Prove or disprove: For every nE A we have n²: = 3.
The given statement is true. We have proved that for every n ∈ A we have n² = 3.
Given, A = {n ∈ Z+ | 1/(n + 1) ∈ Z}
We need to prove or disprove: For every n ∈ A we have n² = 3.
Since n ∈ A, 1/(n+1) ∈ Z ...(1)
Let's try to solve it using contradiction method.
Let's assume that there exists n ∈ A such that n² ≠ 3. In other words, n² - 3 ≠ 0 ...(2)
Using (1), we get:
1/(n+1) = p ∈ Z
So, n+1 = 1/p ...(3)
Squaring both sides of (3), we get:
(n+1)² = (1/p)²
⇒ n² + 2n + 1 = 1/p²
Adding -3 to both sides, we get:
n² - 3 + 2n + 1 = 1/p² ...(4)
Since n ∈ A, we know that 1/(n+1) ∈ Z.
Let's represent it using k, i.e. 1/(n+1) = k.
From (3), we have n+1 = 1/k.
Hence, we can write the above equation as:
n² - 3 + 2(1/k - 1) = 1/k²
⇒ k²n² - 3k² + 2k² - 2k²(k² - 3) = 0
⇒ n² - 3 + 2(1/k - 1) = 1/k² is the required equation.
Let's assume that n² ≠ 3.
Hence, using (2), we get n² - 3 ≠ 0.
Adding it to the above equation, we get:
(n² - 3) + 2(1/k - 1) + n² - 3 - 1/k² ≠ 0
⇒ 2n² - 3 + 2(1/k - 1) - 1/k² ≠ 0
Now, let's consider the LHS of the above equation as a function of k, say f(k) = 2n² - 3 + 2(1/k - 1) - 1/k²
Differentiating it with respect to k, we get:
f'(k) = -2/k³ + 2/k² ... (5)
Clearly, f'(k) > 0 for all k. This implies that f(k) is an increasing function of k.
Let's consider two cases now.
Case 1: k = 1
Since k = 1, we have n + 1 = 1/k = 1, i.e. n = 0. But 0 is not a positive integer.
Hence, we arrive at a contradiction.
Thus, n² = 3.
Case 2: k > 1
Since k > 1, we have 1/k < 1, i.e. 1/k - 1 < 0.
Also, we know that n > 0. This implies that f(k) < f(1).
Hence, we arrive at a contradiction. Thus, n² = 3.
Hence, we have proved that for every n ∈ A we have n² = 3. Therefore, the given statement is true.
To know more about statement visit:
https://brainly.com/question/33442046
#SPJ11
Part A What volume of a 15.0% by mass NaOH solution, which has a density of 1.116 g/mL, should be used to make 4.65 L of an NaOH solution with a pH of 10.0? Express your answer to three significant figures and include the appropriate units.
you can plug in the values and calculate the volume of the 15.0% NaOH solution needed to make a 4.65 L NaOH solution with a pH of 10.0.
To determine the volume of the 15.0% NaOH solution needed to make a 4.65 L solution with a pH of 10.0, we need to consider the molarity of the NaOH solution and its dilution. Here are the steps to calculate it:
1. Calculate the molarity of the NaOH solution needed:
pH = 14 - pOH
Given pH = 10.0
pOH = 14 - 10.0 = 4.0
pOH = -log[OH-]
[OH-] = 10^(-pOH) M
Since NaOH is a strong base, it completely dissociates in water:
NaOH → Na+ + OH-
So, the concentration of NaOH is equal to the concentration of OH- ions.
[NaOH] = [OH-] = 10^(-pOH) M
2. Calculate the moles of NaOH needed for the 4.65 L solution:
Moles of NaOH = [NaOH] × volume of NaOH solution
3. Calculate the mass of NaOH needed for the moles calculated in step 2:
Mass of NaOH = Moles of NaOH × molar mass of NaOH
4. Calculate the mass of the 15.0% NaOH solution:
Mass of NaOH solution = Mass of NaOH / (mass fraction of NaOH)
5. Calculate the volume of the 15.0% NaOH solution using its density:
Volume of NaOH solution = Mass of NaOH solution / density of NaOH solution
To know more about fraction visit:
brainly.com/question/10708469
#SPJ11