The mass of the Earth is 5.972 x 1024-kg and its orbital radius is an average of 1.496 x 1011 meters. Calculate its linear momentum. (Hint: It takes the Earth 365 days to complete one orbit.)

When the frequency of a standing wave set up in a pipe (with both ends open) first harmonic is 300 Hz, the length of pipe is 0.567 metres.

Therefore the answer is 0.567 m.

The speed of sound in air is approximately 340 m/s, and the wavelength of the first harmonic of a standing wave in an open pipe is twice the length of the pipe. Therefore, if the frequency of the first harmonic is 300 Hz, the wavelength can be calculated as:

wavelength = speed of sound / frequency

wavelength = (340 m/s) / (300 Hz)

The length of the pipe can be calculated as half the wavelength:

L = wavelength/2

L = (340 m/s) / (2×300 Hz)

L ≈ 0.567 m

So the length of the pipe is 0.68 m

To know more on standing wave

https://brainly.com/question/15128964

#SPJ4

Answer:

If I remember right I believe it's radio waves

The three key words that have been replaced in the cross - section of a solar panel are:

This means that Option A is correct.

A solar panel, also known as a photovoltaic (PV) panel, is a device that converts sunlight into electricity. It is made up of several different parts that work together to generate electricity. Solar cells are made of silicon and are responsible for converting sunlight into electricity. They are usually arranged in a grid pattern on the panel.

The backsheet is the layer of material that sits on the back of the solar cells. It is responsible for protecting the back of the solar cells from moisture and other environmental factors. It is an insulator and is shown as R.

There are also the copper wires which heat the water and they are painted black as black absorbs heat better. These are labeled S and T respectively.

Find out more on solar panels at https://brainly.com/question/28996669

#SPJ1

Self Shielding FCAW is the use of an outside shielding gas.

Many advantages come with self-shielded circulation arc welding (FCAW-S), such as good weldability, metal deposition rates, and exceptional chemical and mechanical qualities.

With self-shielding wires, there is no need for a gas cylinder because they don't need an inert gas when the arc is operating.As a result, it's a fantastic option for offshore applications or situations where mobility is crucial.

To know more about external shielding gas visit:

https://brainly.com/question/30125623

#SPJ4

Answer:

Evidently W 14 S means West and to the South by 14 deg

If you draw the X-Y coordinates and enter this value

Tx1 = - 32 * cos 14 = -31     (along the negative x-axis)

Ty1 = -32 * sin 14 = -7.4     (along the negative y-axis)

Likewise

Tx2 = 15 * cos 62 = 7.04

Ty2 = -15 * sin 62 = -13.2

Tx = -31 + 7.04 = -24

Ty = -7.4 - 13.2 = -20.6

Final distance = (24^2 + 20.6^2)^1/2 = 31.6 m

Direction will be South of West

tan -20.6 / -24 = 41 deg

The velocity of the bike is 2.57 m/s. Then the kinetic energy of the 44 kg mass is 145.3 J.

Kinetic energy of an object is generated by virtue of its motion. Kinetic energy is related to the mass and velocity of the object by the expression written below:

Ke = 1/2 m v²

Given the distance travelled = 1.70 km = 1700 m

time taken = 11 min = 660 s

then velocity = distance/ time = 1700 /660 = 2.57 m/s

Total mass = 44 kg

Ke = 1/2 44 Kg × (2.57)² = 145.3 J

Therefore, the kinetic energy of Shawn and his bike is 145.3 J

Find more on kinetic energy:

https://brainly.com/question/26472013

#SPJ1

The law of conservation of momentum states that the momentum of a system is equal and conserved before and after collision. Therefore, the final momentum of the system is 513 kgm/s.

The law of conservation of momentum states that, for two or more bodies which are present in an isolated system that are acting upon each other, their total momentum remains constant in the system unless an external force is applied on them. The expression for conservation of momentum is:

m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂

where, m₁ = mass of one object,

m₂ = mass of another object,

u₁ and u₂ are the initial velocities of objects,

v₁ and v₂ are the final velocities of objects.

Here, m₁ = 95kg, m₂ = 120kg

u₁ = 5.4m/s, u₂ = 0m/s (at rest)

m₁ u₁ + m₂u₂ = m₁v₁ + m₂v₂

95 × 5.4 + 120 × 0 = 95 × v₁ + 120 × v₂

513 + 0 = 95 × v₁ + 120 × v₂

Momentum before collision = Momentum after collision

Therefore, the momentum after collision is 513 kgm/s.

Learn more about Momentum here:

https://brainly.com/question/24030570

#SPJ1

Answer:

(B) Cu

Explanation:

An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.

Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.

Isotopes can be defined as the atom of an element that has the same number of protons but different number of neutrons. This ultimately implies that, the isotopes of an element have the same atomic number (number of protons) but different atomic mass (number of nucleons).

The isotope of an element is denoted by [tex] X_{Z}^{A} [/tex]

Where; X is the symbol of the element.

A is the atomic mass or number of nucleons.

Z is the atomic number or number of protons.

Hence, an atom with 29 protons and 36 neutrons is an isotope of copper because it has an atomic mass of 65, which corresponds with that of the chemical element known as copper with the symbol, Cu.

Answer:

Below

Explanation:

Use law of conservation of momentum

 momentum before crash = momentum of the system after crash

     3600 kg  * 21  m/s    =  (3600+ x ) * 9

        solve for x = 4800 kg

The mass of water displaced when the mass of bird bone in water and air is given, is calculated to be 43.4 g.

Given that,

Weight of bird bone in air = True weight = 47 g

Apparent weight of the bird bone when submerged = 3.6 g

The equation for apparent weight is known to be,

Apparent weight = True weight - Buoyant force

Making Buoyant force as subject, we have,

Buoyant force = 47 g - 3.6 g = 43.4 g

F b = mw × g = (m wat - m air)× g

mw = m wat - m air = 47 g - 3.6 g = 43.4 g

Thus, the mass of the water displaced is 43.4 g.

To know more about mass:

https://brainly.com/question/13073054

#SPJ4

Deoxyribonucleic acid is a polymer composed of two polynucleotide chains that coil around each other to form a double helix.

A nonsense mutation occurs in the DNA when a sequence changes itself and gives rise to a stop codon rather than a codon specifying an amino acid. The presence of the new stop codon results in the production of a shortened protein that is non-functional.

A nonsense mutation is also known as base substitution which results in a stop codon in such a position from where there was not one before, which causes the premature termination of protein synthesis and, more than likely, a complete loss of function in the finished protein.

So we can conclude that a nonsense mutation always causes a loss of amino acids.

Learn more about DNA here: brainly.com/question/16099437

#SPJ1

Due to the surface makeup and the product that spilled, Downhill/Downwind is the direction most hazardous materials will spread based on their viscosity.

The viscosity of a fluid (liquid or gas) is its resistance to a change in form or movement of neighbouring sections relative to one another. Viscosity signifies resistance to flow. The SI unit is poiseiulle (PI).

It relates to the colloquial sense of "thickness" in liquids: syrup, for example, has a higher viscosity than water. The strength of the compensatory force is related to the viscosity of the fluid in a tube with a constant rate of flow.

In general, viscosity is affected by the condition of a fluid, such as temperature, pressure, and rate of deformation. However, in certain circumstances, the reliance on some of these features is minor. The viscosity of a Newtonian fluid, for example, does not vary appreciably with the rate of deformation. Only at very low temperatures is zero viscosity (no resistance to shear stress) observed in superfluids; otherwise, the second law of thermodynamics requires all fluids to have positive viscosity.

To learn more about viscosity, here

https://brainly.com/question/13385698

#SPJ4

Answer:

The electric potential will be "259.695 volt".

Explanation:

In the given question, the figure is not provided. Below is the attached figure given.

Given:

[tex]q_1=6.39\times 10^{-9} \ C[/tex]

[tex]q_2=3.22\times 10^{-9} \ C[/tex]

[tex]AP=(0.150+0.250)[/tex]

      [tex]=0.40 \ m[/tex]

[tex]BP=0.25 \ m[/tex]

Now,

At point P, the electric potential will be:

⇒ [tex]V=\frac{q_1}{4 \pi \epsilon_o AP } +\frac{q_2}{4 \pi \epsilon_o BP}[/tex]

By putting values, we get

⇒     [tex]=9\times 10^9 [\frac{6.39\times 10^{-9}}{0.40} +\frac{3.22\times 10^{-9}}{0.25} ][/tex]

⇒     [tex]=259.695 \ Volt[/tex]

Answer:

259.695

Explanation:

Acellus

According to the kinetic theory of matter, changes in heat energy allow for phase transitions between solids, liquids, and gases.

When something is heated, the particles inside move faster and have more energy. When an object warms up, its atoms and molecules gain kinetic energy. When something is heated, its constituent atoms or molecules accelerate in their motion. Matter's kinetic energy can be quickly and easily increased.

When an object warms up, its atoms and molecules gain kinetic energy. The atomic or molecular motions of matter increase with temperature. Lifting a particle's kinetic energy is a breeze. When a substance absorbs heat, the inter-particle bonds in it weaken and break, resulting in a phase transition. If the particles aren't moving faster, there can't be any more heat. 

Want to know more about kinetic energy visit the link which is given below;

https://brainly.com/question/26472013

#SPJ4

Answer:

the density of the mercury is 19.85 cm^3

Explanation:

Given that

The density of the mercury is 13.6g\cm^3

And, the mass of the mercury is 270

We need to determine the volume of the mercury

As we know that

density = mass ÷ volume

 13.6 g/cm3 =  270 g/ volume

volume = (270 g) ÷ (13.6 g/cm3)

= 19.85 cm^3

Hence, the density of the mercury is 19.85 cm^3

According to the given statement 67.7%  is the efficiency of the engine.

A comparison of the energy output and input in a particular system is called efficiency in physics (and frequently in chemistry). Its definition is the proportion of output energy to input energy, which is provided by the equation: To describe energy in the form of heat or power, this equation is frequently utilized.

n = 1 - (QC/QH)

n = efficiency

QC = Cold Reservoir = 220 K

QH = Hot Reservoir = 680 K

n = 1 - (220 ÷ 680)(÷10)

n = 1 - (22 - 68) (2)

n = 1 - (11 ÷ 34 )

n = (34 - 11) ÷ 34

n = 23 ÷ 34

n = 0.676 * 100

n = 67.6

Therefore, 67.6% is the efficiency of the engine.

Learn more about efficiency from the given link.

brainly.com/question/13222283

#SPJ4

Answer:

i think the answer is infrared

At his current velocity the sprinter will complete the 100.0-m dash in 28.53 s.

What is velocity?

Velocity is a vector quantity that describes the rate of change of an object's position. It is a measure of how fast an object is moving and in what direction. Velocity is measured in units of meters per second (m/s) or miles per hour (mph) and is often represented by the symbol "v".

We can use the equations of motion to calculate the time for the sprinter to complete the race.

First, we can use the equation:

v = u + at

to find the final velocity of the sprinter after accelerating for 20.0 m. Here, u is the initial velocity (which is 0 m/s since the sprinter is at rest at the start of the race), a is the acceleration of 3.20 m/s^2, and t is the time it takes for the sprinter to accelerate for 20.0 m.

v = 0 + (3.20 m/s^2)(t)

We know that the sprinter accelerates for 20.0 m, so we can use the equation:

s = ut + 1/2at^2

to find the time t:

20.0 m = (0 m/s)(t) + 1/2(3.20 m/s^2)(t^2)

t^2 = (20.0 m) * 2 / (3.20 m/s^2) = 12.5

t = sqrt(12.5) = 3.53 s

So the time it takes for the sprinter to accelerate for 20.0 m is 3.53 s.

Next, we can use the equation:

v = d/t

to find the time it takes for the sprinter to cover the remaining 80.0 m of the race at his final velocity. Here, d is the remaining distance of 80.0 m and v is the final velocity found before.

t = d/v = 80.0 m / (3.20 m/s) = 25.0 s

So the time it takes for the sprinter to cover the remaining 80.0 m of the race at his final velocity is 25.0 s

So the total time for the race is the sum of the time it takes to accelerate and the time it takes to cover the remaining distance at a constant velocity:

t = 3.53 s + 25.0 s = 28.53 s

Hence, at his current velocity the sprinter will complete the 100.0-m dash in 28.53 s.

To learn more about velocity from the given link:

https://brainly.com/question/25749514

#SPJ4

During phase shift, the substance's molecules' average kinetic energy remains constant.

Simply put, molecules move more quickly as kinetic energy rises. Nevertheless, molecules change phases when potential energy rises. The molecule changes phases as a result of an increase in potential energy.

In a phase change, matter moves from one state to another either by gaining energy through heat and entering a more energetic state, or by losing energy through heat and entering a state with lower energy.

The energy supplied during phase change is only used to separate the molecules; none of it is used to boost the kinetic energy of the molecules. Therefore, since the molecules' kinetic energy is constant, its temperature won't increase.

To learn more about kinetic energy refer to:

https://brainly.com/question/26472013

#SPJ4

period of orbit is 2136.63 m/s if The moon Phobos orbits Mars (mass = 6.42x 1023 kg) at a distance of 9.38 x 106 m.

noun. the extent or amount of space between two things, points, lines, etc. the state or fact of being apart in space, as of one thing from another; remoteness. a linear extent of space: Seven miles is a distance too great to walk in an hour.

The SI unit for distance is the meter (m). Short distances may be measured in centimeters (cm), and long distances may be measured in kilometers (km). For example, you might measure the distance from the bottom to the top of a sheet of paper in centimeters and the distance from your house to your school in kilometers.

To know more about distance visit

https://brainly.com/question/13034462

#SPJ1

The projectile will probably keep moving in a straight line and at a constant speed as long as no unbalanced forces are acting on it, according to Newton's law of inertia.

To learn more about law of inertia refer:

brainly.com/question/1830739

#SPJ4

The Force acting on the ball during collision is 25.9 N.

To calculate the magnitude of the average force, we use the formula below.

F = m(v-u)/t..........Equation 1

Where:

F = Average force acting on the ball

m = mass of the ball

v = Final velocity

u = Initial velocity

t = time.

From the question,

Given:

Substitute these given values into equation 1

F =  0.663 (12.2  -10.4 )/0.046

F = 25.9 N

Hence, The Force acting on the ball during collision is 25.9 N

Learn more about force here:

brainly.com/question/12970081

#SPJ4

Power is given at p=1.13 *10^(-5) throughout this period.

An electrical component that can store and release electric energy is a power capacitor. The device comprises of one or more pairs of plates that are connected to two terminals and allow the stored energy to be released into a circuit as needed. The plates are separated from one another by an insulating material (the dielectric). By removing the reactive power from the supply line, a capacitor aids in the improvement of power factor.

This is accomplished through the capacitor's storage of magnetic reversal energy. Power is defined as energy multiplied by the frequency of an operation. (a) Computation needs switching from one voltage (V 1) to another voltage (V 2) before most likely returning to a starting voltage (like V 1).

Power = u/t

p = 350/(3.1*(1/1000))

p= 1.13 *10^(-5)

Learn more about power visit: brainly.com/question/25864308

#SPJ4

The benefits of dynamic exercises before playing volleyball and how they will prepare your body for the match are:

Learn more about dynamic stretching:

https://brainly.com/question/24842019

#SPJ4

Answer:Most physics and biomechanics studies of a golf swing are concerned with the motion of a ... The top surface of the concrete was much smoother than the ball, ... The ball will then roll like a coin on its edge or like a ball used in lawn bowls. ... centre of the club head then the force of the ball pushing against the face

Explanation:

Answer:

this because the surface tension was lowered by using an impurity or rising the temp of the water

Answer:

1.69 T

Explanation:

Applying,

F = BvqsinФ.................. Equation 1

Where F = Force, B = magnetic field, v = velocity, q = charge on an electron, Ф = angle between the electron and the field.

make B the subject of the equation,

B = F/(vqsinФ)............. Equation 2

From the question,

Given: F = 2.0×10⁻¹³ N, v = 7.4×10⁵ m/s, Ф = 90°

Constant: q = 1.60×10⁻¹⁹ C

Substitute into equation 2

B =  2.0×10⁻¹³/(7.4×10⁵×1.60×10⁻¹⁹×sin90°)

B = 0.169×10

B = 1.69 T

Answer:

the first one is higher

Explanation:

i d k what the second one is

Answer: ( 2nd ) ( 3 )

Explanation: