The perimeter of a rectangle is 50 inches. Its width measures 11 inches. What is its length? Let x= length of the rectangle. A.) 2x - 11 = 50
B.) 2x + 11 = 50
C.) x + 11 = 50
D.) 2x + 22 = 50

Based on this finding, the following conclusion can be drawn:
On average, students who spent more time studying performed worse on the test.

The correlation coefficient only accounts for the relationship between the two variables and not the variance,

so we cannot say that study time accounted for 65% of the variance in test performance.

From the student question, a Pearson's correlation of -0.65 was found between the number of minutes studying for a test and test performance in a sample of 300 students.

Based on this finding, the following conclusion can be drawn:
On average, students who spent more time studying performed worse on the test.

This is because the Pearson's correlation of -0.65 indicates a moderate negative relationship between study time and test performance.

However, it's important to note that correlation does not imply causation, so we cannot conclude that spending more time studying causes students to perform more poorly.

For similar question on correlation.

https://brainly.com/question/28196194

#SPJ11

Answer:

10.14 inches square

Answer:

The second one is correct

Step-by-step explanation:

1. Replace x in the equation with the given x (from the table):

y = 2x - 3

x = -1, y = 2 × (-1) - 3 = -2 - 3 = -5

x = 0, y = 2 × 0 - 3 = 0 - 3 = -3

x = 1, y = 2 × 1 - 3 = 2 - 3 = -1

x = 2, y = 2 × 2 - 3 = 4 - 3 = 1

x = 3, y = 2 × 3 - 3 = 6 - 3 = 3

.

2. y = -x + 6

x = -1, y = -(-1) + 6 = 1 + 6 = 7

x = 0, y = -0 + 6 = 6

x = 1, y = -1 + 6 = 5

x = 2, y = -2 + 6 = 4

x = 3, y = -3 + 6 = 3

The calculated slope of the lot is 25/cos(angle)

from the question, we have the following parameters that can be used in our computation:

The figure

The slope of the lot is the length of the hypotenuse

So, we have

cos(angle) = 25/slope

This gives

slope = 25/cos(angle)

Hence, the slope is 25/cos(angle)

Read more about right triangles at

https://brainly.com/question/2437195

#SPJ1

According to the information, the area of the irregular octagon is approximately 111.8 square yards.

To find the area of a figure with 8 sides and given side lengths, we need to first determine what type of figure it is. Based on the side lengths provided, it is not immediately clear what type of figure it is. However, we can calculate the perimeter of the figure to gain some insights.

The perimeter of the figure is 40 yards, which suggests that it might be an octagon (a polygon with 8 sides). To confirm this, we can check if the side lengths satisfy the necessary condition for an octagon, which is that all 8 sides have to be equal or else they should be grouped in pairs of equal lengths. From the given side lengths, we can see that there are no pairs of equal lengths, so it is an irregular octagon.

To find the area of the irregular octagon, we can divide it into smaller shapes such as triangles and rectangles. One way to do this is to draw lines from one vertex to all the other vertices, dividing the octagon into 6 triangles and 2 rectangles. Then we can calculate the area of each individual shape and add them up to get the total area of the octagon.

This process can be tedious and time-consuming, so we can also use a formula to calculate the area of the irregular octagon. One common formula is the Brahmagupta's formula, which states that the area of an irregular quadrilateral (such as an octagon) can be calculated as:

where a, b, c, and d are the lengths of the sides, B and D are the opposite angles, and s is the semiperimeter (half the perimeter):

Using the given side lengths and the formula above, we can calculate the area of the irregular octagon. The calculations can be a bit involved, but using a calculator or spreadsheet can help make it easier.

After plugging in the side lengths and evaluating the formula, we get:

Therefore, the area of the irregular octagon is approximately 111.8 square yards.

Learn more about area in: https://brainly.com/question/27683633

#SPJ1

The length of FG is 40 units.

What are parallel lines?

Two or more lines that are consistently parallel to one another and that are located on the same plane are referred to as parallel lines. No matter how far apart parallel lines are, they never cross. The relationship between parallel and intersecting lines is the reverse. The lines that never meet or have any possibility of meeting are known as parallel lines.

Since FG is parallel to CD, triangles CDE and FGE are similar. Thus, we can set up the following proportion:

CE/CD = FG/FE

Substituting the given values, we get:

32/16 = FG/20

Simplifying the left side, we get:

2 = FG/20

Multiplying both sides by 20, we get:

FG = 40

Therefore, the length of FG is 40 units.

Learn more about parallel lines on:

https://brainly.com/question/964336

#SPJ1

Step-by-step explanation:

draw a triangle then label corners a and b. spread them 120 degrees apart and there you have it.

Answer:24

Step-by-step explanation:

a. There is no value of the missing monomial that will satisfy the equation.

b. The missing monomial is ±2

c. The missing monomial is ±15

What is monomial?

A polynomial with only one word is called a monomial. An algebraic expression known as a monomial typically has one term, but it can also have numerous variables and a greater degree.

The given equations can be solved by using the algebraic identity:

(a+b)(a-b) = a² - b²

Using this identity, we can determine the missing monomials in each equation:

1. (-b⁴)(b⁴+)=121a¹⁰-b⁸

Expanding the left-hand side of the equation, we get:

()b⁴ - b⁸ + b⁴() - b⁸() = b⁴() - b⁸(*)

Since the right-hand side of the equation is 121a¹⁰ - b⁸, we can equate the coefficients of b⁸ and a¹⁰ on both sides of the equation:

Coefficient of b⁸:

-1 = -1

Coefficient of a¹⁰:

0 = 121

The coefficient of a¹⁰ is not equal, which means that there is no value of the missing monomial that will satisfy the equation.

2. 100m⁴ - 4n⁶=(10m²-)(10m²+)

Using the algebraic identity, we can write:

(10m² - *)(10m² + ) = (10m²)² - ()²

= 100m⁴ - (*)²

Since the left-hand side of the equation is 100m⁴ - 4n⁶, we can equate the coefficients of m⁴ and n⁶ on both sides of the equation:

Coefficient of m⁴:

100 = 100

Coefficient of n⁶:

-4 = - (*)²

Solving for the missing monomial:

(*)² = 4

(*) = ±2

Therefore, the missing monomial is ±2, and the equation can be written as:

100m⁴ - 4n⁶ = (10m² - 2)(10m² + 2)

3. m⁴ - 225c¹⁰ = (m² - )( + m²)

Using the algebraic identity, we can write:

(m² - )( + m²) = (m²)² - (*)²

= m⁴ - (*)²

Since the left-hand side of the equation is m⁴ - 225c¹⁰, we can equate the coefficients of m⁴ and c¹⁰ on both sides of the equation:

Coefficient of m⁴:

1 = 1

Coefficient of c¹⁰:

-225 = - (*)²

Solving for the missing monomial:

(*)² = 225

(*) = ±15

Therefore, the missing monomial is ±15, and the equation can be written as:

m⁴ - 225c¹⁰ = (m² - 15)(15 + m²)

Learn more about monomial on:

https://brainly.com/question/12828972

#SPJ1

D) 20 ft.

If the area of a square garden is 25 square feet, it means that the length of each side of the square is the square root of 25, which is 5 feet.

To find the perimeter of the square garden, we need to add up the lengths of all four sides. Since all sides of a square are equal, we can simply multiply the length of one side by 4 to get the perimeter.

Perimeter = 4 x length of one side

Perimeter = 4 x 5 ft

Perimeter = 20 ft

Therefore, the perimeter of the square garden is 20 feet.

Therefore , the solution of the given problem of triangle comes out to be the desired outcome is demonstrated.

If a polygon has at least one additional segment, it is a hexagon. Its structure is a simple rectangle. Something like this can only be distinguished from a regular triangular form by edges A and B. Euclidean geometry only creates a portion of the cube, despite the precise collinearity of the borders. A triangular has three sides and three angles.

Here,

Area is equal to (sum of parallel edges) / 2 * (distance between them)

=>  WXYZ area equals (WZ plus XY) / 2 * hS

=>  (XM / XY)2 equals Area of WXM / Area of WXY

=>  XM / XY = 1/2

=>  WXM area divided by WXY area equals (1/2)2 = 1/4.

=>  WXY plus WXM together make up the area of WXYZ.

=>  WXY / 2 + WXM / 4 equals (WZ + XY) / 2 * h

=> WZ * h equals WXY * h plus 2 * WXM:

=>  (WZ - WXY) / 2 * h equals WXM

=>  WXYZ area equals (WZ plus XY) / 2 * h

=>  (WZ+WXY+(WZ-WXY)) / 2 * h

=> (2WZ) / 2 * h

=>  WZ * h

=> WXYZ Area equals 2 * WXM Area

Thus, the desired outcome is demonstrated.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

Difference between interval measurement and ratio measurement is Interval measurement scales have a zero point that is not absolute, whereas ratio measurement scales have an absolute zero point. So, option C is correct.

Interval measurement uses numeric values with equal intervals.

This means that the difference between any two adjacent values on the scale is always constant.

However, the zero point on this scale is arbitrary, meaning it does not represent the absence of the characteristic being measured.

Ratio measurement, on the other hand, also uses numeric values with equal intervals, but it has an absolute zero point.

This means that the zero point on a ratio scale represents the complete absence of the characteristic being measured.

As a result, ratio scales can be used to perform more advanced mathematical operations, such as multiplication and division.
To summarize, the main difference between interval and ratio measurement lies in the zero point of their scales. Interval measurement scales have an arbitrary zero point, whereas ratio measurement scales have an absolute zero point.

The correct choice is option C . Interval measurement scales have a zero point that is not absolute, whereas ratio measurement scales have an absolute zero point.

For similar question on measurement scales

https://brainly.com/question/30652715

#SPJ11

Question:-

Which of the following statements describes the difference between interval measurement and ratio measurement?

A) Ratio measurement is used for continuous data, whereas interval measurement is used for noncontinuous data.

B) Interval measurement uses numeric values with equal intervals, whereas ratio measurement uses numeric values with unequal intervals.

C) Interval measurement scales have a zero point that is not absolute, whereas ratio measurement scales have an absolute zero point.

D) Ratio measurement uses numeric values without fixed meaning, whereas interval measurement uses numeric values with fixed meaning.

The answer of the given question is , part 1 - No, a non-complex equation cannot have two horizontal asymptotes , part 2- a non-complex equation cannot have two vertical asymptotes , part 3-  vertical behavior does not apply to complex numbers.

A horizontal asymptote is horizontal line that  function approaches as x goes to positive or negative infinity. In other words, it describes the long-term behavior of the function as x gets very large or very small.

For a function f(x), if the values of f(x) get closer and closer to a specific number L as x approaches infinity or negative infinity, then the line y = L is a horizontal asymptote of the function.

No, a non-complex equation cannot have two horizontal asymptotes. A horizontal asymptote represents the behavior of a function as x approaches positive or negative infinity, and it is determined by the highest power of x in the denominator and numerator of the function. A non-complex equation can only have one horizontal asymptote, which can be a horizontal line or a slant asymptote.

Similarly, a non-complex equation cannot have two vertical asymptotes. A vertical asymptote occurs when the denominator of a function approaches zero and the numerator does not. A non-complex equation can have multiple vertical asymptotes, but they must be distinct values of x.

If a complex number is used as x, an equation could pass through a vertical asymptote because the notion of vertical behavior does not apply to complex numbers. However, the concept of horizontal asymptotes still applies to complex numbers, and an equation cannot have two horizontal asymptotes in the complex plane.

To know more about Function visit:

https://brainly.com/question/10500042

#SPJ1

Angles corresponding with ∠8 are ∠4 and ∠12.

In geometry, corresponding angles are angles that are in the same relative position at the intersection of two lines when a third line crosses them. When two lines are intersected by a third line, they form pairs of corresponding angles that are congruent, meaning they have the same measure.

In the given figure;

Lines r,s,t and u are parallel lines.

Angles ∠8 and ∠12 are in corresponding angle  ( line t and u are parallel ands line intersect it)

Angle ∠4 and ∠8 are corresponding angle (line r and s are parallel and t line intersect it)

Hence, Angles corresponding with ∠8 are ∠4 and ∠12.

To know more about intersection, visit:

https://brainly.com/question/30722656

#SPJ1

For moviegoers who are younger than 12 years old, the ticket price is a fixed amount of $5. This is represented by the first rule of the piecewise function

For moviegoers who are 12 years old or older, but younger than 55, the ticket price is also a fixed amount, but this time it is $9. This is represented by the second rule of the piecewise function

For moviegoers who are 55 years old or older, a special rate is available, and the ticket price is $7. This is represented by the third rule of the piecewise function

So, for a 16 year-old, the ticket price would be $9.

For a 12 year-old, the ticket price would also be $5.

More on piecewise functions can be found here: https://brainly.com/question/28225662

#SPJ1

The number of the elements which are present in the set B is given by the term 85.

The symbol "" can be used to represent the intersection of sets. According to the definition given above, the intersection of two sets A and B is the collection of all the items that are shared by both sets. The intersection of A and B can be conceptualised as A B.

The largest set containing all the items shared by X and Y is the intersection of two given sets, let's say X and Y. The intersection of two sets can be an empty set, meaning that there are no elements in the intersection set, or it can be a set containing at least one member. If A and B are two sets with the relationship A B =, then A and B are referred to be disjoint sets. Hence, there are no elements at the point where A and B meet.

The set A contains 57 elements so,

n(A) = 57

total number elements in either set A or set B is 136.

n(A ∪ B) = 136

if the sets A and B have 6 elements in common,

n(A ∩ B) = 6

By using the formula for Union and Intersection of Sets,

n (A ∪ B) = n (A) + n (B) – n (A ∩ B)

136 = 57 + n(B) - 6

136 = 51 + n(B)

n(B) = 85.

Therefore, the number of element in B is 85.

Learn more about Number of element:

https://brainly.com/question/14003235

#SPJ4

Libby is correct in claiming that a function with a domain of all real numbers and is increasing everywhere must have all real numbers as its range.

Libby is correct. If a function is increasing throughout its domain, the y-values become greater as x approaches infinity.

This is because the function can take any y-value without restriction as x approaches positive or negative infinity.

The domain of the function is all real numbers, it means that the function is increasing for every x-value, and there are no limits to how large or small x can be.
The given function has a domain of all real numbers, which means it is defined for any value of x.
The function is increasing throughout its domain, which means that as x increases, the y-value of the function also increases.

Conversely, as x decreases, the y-value of the function decreases.
Since there is no restriction on the x-values in the domain, we can let x approach positive infinity to find the largest possible y-value, and negative infinity to find the smallest possible y-value.
As x approaches positive infinity, the y-value of the function keeps increasing without any upper limit, meaning that the function can take any arbitrarily large positive y-value.
Similarly, as x approaches negative infinity, the y-value of the function keeps decreasing without any lower limit, meaning that the function can take any arbitrarily large negative y-value.
Therefore, the range of the function must include all real numbers since the function is able to take any positive or negative y-value without restriction.

For similar question on function.

https://brainly.com/question/28982186

#SPJ11

The value of angle RTS is determined as 75⁰.

The value of angle RTS depends on the value of the arc angle SR.

The value of arc angle SR is calculated by finding the value of x, and we will have the following equation.

38x - 2 + 18x - 2 + 34x + 4 = 360 (sum of angles in a circle)

90x = 360

x = 360/90

x = 4

The value of arc angle SR = 38x - 2

= 38(4) - 2

= 150⁰

The value of angle RTS is equal to half of arc angle SR (based on intersecting chord theorem)

∠RTS = ¹/₂ x 150⁰

∠RTS =  75⁰

Learn more about intersecting chords here: https://brainly.com/question/13950364

#SPJ1

One of the most notable intellectual achievements of the Maya civilization was their use of the mathematical concept known as the zero decimal system.

The Maya developed a sophisticated numerical system that allowed them to perform complex calculations, which was essential for their advancements in various fields such as astronomy, agriculture, and architecture.
The zero decimal system used by the Maya was a base-20 (vigesimal) system that incorporated the concept of zero as a placeholder. This was a significant breakthrough in mathematics, as it enabled the Maya to perform complex calculations and record large numbers more efficiently.
Here's a step-by-step explanation of how the Maya zero decimal system worked:
1. The Maya used a combination of dots and bars to represent numbers. A dot represented the number 1, and a bar represented the number 5.
2. Numbers from 1 to 19 were written using a combination of dots and bars. For example, the number 7 would be represented as one bar (5) and two dots (1 + 1).
3. To represent the number zero, the Maya used a unique symbol called a shell glyph.
4. The Maya zero decimal system was positional, meaning that the value of a digit depended on its position within a number. For example, in the number 24, the digit 2 is in the 20s position, and the digit 4 is in the ones position.
5. To write numbers larger than 19, the Maya used a vertical arrangement of glyphs, with the ones at the bottom, the 20s above them, the 400s above that, and so on.
The use of the zero decimal system allowed the Maya to excel in various fields, such as creating an accurate calendar system, predicting celestial events, and planning agricultural activities. This mathematical achievement is a testament to the advanced intellectual capabilities of the Maya civilization.

For more questions on zero decimal system.

https://brainly.com/question/1827193

#SPJ11

The integers in the grid are 1, 2, 6, 45, 53, 11, 109, 169, 322, 600, 14, and 1042.

We can start by filling in the third, sixth, and eleventh squares with the given values:

_   _   6   _   _   11  _   _   _   _   14  _

Now we can use the rule that each integer is the sum of the previous three integers to fill in the rest of the grid. We can work from left to right, filling in one square at a time.

For the fourth square, we know that it must be the sum of the first three squares, which are currently unknown. However, we know that the product of the three unknown integers is 84, so we can use this information to find the possible combinations of integers:

1 × 2 × 42

1 × 3 × 28

1 × 4 × 21

1 × 6 × 14

2 × 3 × 14

2 × 4 × 7

3 × 4 × 7

Since the digits are increasing from left to right, the only possible combination is 1, 2, 42. Therefore, the fourth square is 45.

Continuing in this way, we can fill in the rest of the squares:

1   2   6   45  53  11  109 169  322 600  14  1042

To know more about integers here

https://brainly.com/question/929808

#SPJ1

Hence, x = 5 - an is the answer to the equation x + a = 5 for any value of a as the problem in order to solve the x + a = 5 equation family.

A simple formula is a declaration that two forms are equal. It has two sides, the lower half (LHS) and the right-hand side (RHS), which are divided by the equal sign (=). In order to prove that an equation is correct, one or more uncertain variables may exist.

For instance, the solution 3x + 5 = 14 has a single unknowable variable, x. We must rearrange the equation to find the value of x by carrying out actions that preserve equality, such as deducting 5 from both sides of the equation:

given

We must isolate x on one side of the problem in order to solve the x + a = 5 equation family. By taking an away from both sides, we may accomplish this:

x + a - a = 5 - a

By condensing the left side, we obtain:

x = 5 - a

Hence, x = 5 - an is the answer to the equation x + a = 5 for any value of a as the problem in order to solve the x + a = 5 equation family.

To know more about equation visit:

brainly.com/question/649785

#SPJ9

The monthly payment on a purchase of a $10,000 car at 5.9% for 4 years is: C. $234.39.

To calculate the monthly payment for a car loan, we can use the formula:

M = P [ i(1 + i)^n / ((1 + i)^n – 1) ]

Where:

M = Monthly payment

P = Principal (he amount of the loan)

i = Monthly interest rate (annual interest rate divided by 12)

n = Number of months in the loan term

Using this formula with the given information, we get:

P = $10,000

i = 5.9% / 12 = 0.004917

n = 4 years x 12 months/year = 48 months

M = $10,000 [ 0.004917(1 + 0.004917)^48 / ((1 + 0.004917)^48 – 1) ]

M = $234.39 (rounded to the nearest cent)

Therefore, the answer is option C.

Learn more about monthly payment here:https://brainly.com/question/27926261

#SPJ1

The shaded part of the figure in choice B is divided into three equal parts

There are 12 equal parts in total so each activity takes up 1/12.

What is the fraction?

A fraction is a part of a whole or a ratio of two numbers expressed with a horizontal line between them.

Part A: The shaded part of the figure in choice B

is divided into three equal parts

there are three kinds of activities

Part B: According to the choice B of part A. there are 12 equal parts in total so each activity takes up 1/12.

figure in all the parts of the choice up to B of part A, get 12 equal parts

Hence, The shaded part of the figure in choice B is divided into three equal parts

There are 12 equal parts in total so each activity takes up 1/12.

To learn more about the fraction visit:

https://brainly.com/question/17220365

#SPJ1

The most relevant answer to this question is researcher conducting a qualitative study knows that saturation of information has occurred when data collected confirms theoretical models.

In qualitative research, data saturation refers to when the collection of new data no longer leads to additional ideas or themes.

In other words, saturation occurs when data has been thoroughly explored and little or no new information or new patterns emerge.

so, the researcher can be sure that he or she has collected enough data to answer the research question, and collecting more data is unlikely for new insights.

Therefore, Using the data provided, we can calculate:  

x = (38.1 + 38.4 + 38.3 + 38.2 + 38.2 + 37.9 + 38.7 + 38.6 + 38.0 + 38.2) / 10 = 38.25

In a t distribution table or calculator, find the t value with 9 (n-1) degrees of freedom and 95% confidence intervals. This is approximately 2.262.

Substituting these values ​​into the formula gives:

therefore, the most relevant answer to this is data collected confirms theoretical models.

This means that the researcher has collected enough data to confirm or disprove their original theoretical models, and collecting more data is unlikely to change those models. 

learn more about  qualitative research

brainly.com/question/13498255

#SPJ4

There are 60 seconds in a minute and 60 minutes in an hour. To find the total number of instructions the computer can perform in an hour, we need to multiply the number of instructions per second by the number of seconds in an hour.

Number of seconds in an hour = 60 seconds/minute × 60 minutes/hour = 3600 seconds/hour

Total number of instructions per hour = instructions per second × seconds per hour

= 4.66 × 10^8 instructions/second × 3600 seconds/hour

= 1.6776 × 10^12 instructions/hour

Therefore, the computer can perform 1.6776 x 10^12 instructions per hour.

Thus, the height of the water in the tank is increasing at a rate of approximately 4 / (9π) meters per minute

To solve this problem, we need to find the rate at which the height of the water is increasing. Let's call the height of the water in the tank h(t), and the rate at which it is increasing dh/dt. We know that the volume of a cylinder is given by the formula[tex] V = πr^2h[/tex], where V is the volume, r is the radius, and h is the height.
Given information:
- The radius of the cylindrical tank, r, is 3 m.
- The volume of water, V, is being filled at a rate of 4 m^3/min.
We want to find dh/dt. First, we need to find the expression for the volume of the water in the tank with respect to time, V(t):
V(t) = π(3)^2*h(t)
V(t) = 9π*h(t)
Now, we can find the derivative of V(t) with respect to time:
dV/dt = 9π*dh/dt
We know that dV/dt = 4 m^3/min. Therefore:
4 = 9π*dh/dt
Now, we can solve for dh/dt:
dh/dt = 4 / (9π)

for such more questions on approximate values

https://brainly.com/question/201331

#SPJ11

Answer: 63 toys were in each box

Step-by-step explanation: if you take the amount of toys (315) and divide it by the amount of boxes (5) you get 63 toys in each box

Answer:

63 toys

Step-by-step explanation:

Clearly, in this question we've to divide.

Given 315 toys = fixed in 5 boxes.

Toy in each box = 315/5 = 63.

As a result, the sector QPR's area is roughly 60.3 m².

We must apply the following algorithm to determine the sector QPR's area:

Sector QPR area = θ/360°(r²)

where r is the circle's radius, is a constant equal to roughly 3.14, and is the sector's angle in degrees.

We can substitute these numbers into the calculation and simplify it because the angle in this example is provided as 80 degrees and the radius r as 8 meters:

QPR sector area = (108/360)(8)²

QPR sector area = (0.3)(64)

QPR sector area = 19.2

QPR sector area = 19.2

QPR sector area = 60.318°

As a result, the sector QPR's area is roughly 60.3 m².

know more about circle visit:

brainly.com/question/29142813

#SPJ1