The induced emf in the primary is 1320 /∠ 61.62⁰.
Given: Primary resistance = 0.1 ohm
Secondary resistance = 0.4 ohm
Applied voltage = 1000V
Primary current = 50A
At lagging power factor = 0.6
Primary leakage reactance = 0.8 ohm
We know that, the primary current I1 = V1/Z1, where V1 is the primary voltage and Z1 is the total primary impedance.
Here, primary impedance, Z1 = (R1 + jX1), where R1 is the primary resistance and X1 is the primary leakage reactance.
The power factor, cos φ = 0.6 lagging.
Hence, the impedance angle, φ = cos⁻¹ 0.6 = 53.13⁰Now, we can calculate primary resistance as R1 = cos φ × Z1= cos 53.13⁰ × √(0.1² + 0.8²)= 0.44 ohm
The total primary impedance, Z1 = R1 + jX1= 0.44 + j0.8 ohm
Primary current, I1 = V1/Z1= 1000/(0.44 + j0.8)= 1842.5 /∠ 61.62⁰
The induced emf in the primary is given by the equation, E1 = V1 + I1R1.
Now, substituting the values, we get:E1 = 1000 + (1842.5 /∠ 61.62⁰) × 0.44= 1000 + 810.8 /∠ 61.62⁰= 1320 /∠ 61.62⁰
Hence, the induced emf in the primary is 1320 /∠ 61.62⁰.
To learn about voltage here:
https://brainly.com/question/1176850
#SPJ11
Consider a material interface at z = 0. In region 1 (z <0), the medium is free space (μ = μ₁,8 = 0). In region 1 (z>0), the medium is characterized by (μ=25μ, = 10). A uniform plane wave E₁ (z) = 5e³a, V/m is normally incident on the interface. If w=3×10³ rad/s, determine the is a) the reflected wave E, (z) in region 1 and the transmitted wave E(z) in region 2: b) the standing wave ratio in region 1: c) Determine the total time-domain field E₁ (z,t) in region 1
The total time-domain field E₁ (z,t) in region 1 is:-4.994 e³a + 5cos(3×10³t) e³a V/m
The reflected wave E(z) in region 1 is given by the formula: E(z) = -rE₁(z)where r is the reflection coefficient. The transmitted wave E(z) in Region 2 is given by the formula:
E(z) = tE₁(z)where t is the transmission coefficient. The reflection coefficient is given by the formula:r = (Z₂ - Z₁) / (Z₂ + Z₁), where Z₁ and Z₂ are the characteristic impedances of the media in Region 1 and Region 2, respectively.
Z₁ = √(μ₁ / ε₁) = √(1 / 8) = 0.3536 Ω
Z₂ = √(μ₂ / ε₂) = √(25μ₀ / 10ε₀) = 265.14 Ωr = (265.14 - 0.3536) / (265.14 + 0.3536) = 0.9987
The transmission coefficient is given by the formula:t = 2Z₂ / (Z₂ + Z₁) = 2(265.14) / (265.14 + 0.3536) = 1.0006
The reflected wave E(z) in region 1 is: E(z) = -rE₁(z) = -(0.9987)(5e³a) = -4.994 e³a V/m
The transmitted wave E(z) in region 2 is: E(z) = tE₁(z) = (1.0006)(5e³a) = 5.003 e³a V/m
The time-domain field E₁ (z,t) in region 1 is given by the formula: E₁ (z,t) = Re[E₁ (z)ejωt] = Re[5e³a ej3×10³t] = 5cos(3×10³t)e³a V/m
The total time-domain field E₁ (z,t) in region 1 is given by the formula: E₁ (z,t) = E(z) + E₁ (z,t) = -4.994 e³a + 5cos(3×10³t) e³a V/mb)
The standing wave ratio (SWR) is given by the formula: SWR = (1 + |Γ|) / (1 - |Γ|), where Γ is the reflection coefficient.SWR = (1 + |0.9987|) / (1 - |0.9987|) = 723.5c)
The total time-domain field E₁ (z,t) in region 1 is given by the formula: E₁ (z,t) = E(z) + E₁ (z,t) = -4.994 e³a + 5cos(3×10³t) e³a V/m
Therefore, the total time-domain field E₁ (z,t) in region 1 is:-4.994 e³a + 5cos(3×10³t) e³a V/m
To learn about standing wave ratio here:
https://brainly.com/question/17619189
#SPJ11
A one-way communication system, operating at 100 MHz, uses two identical 12 vertical, resonant, and lossless dipole antennas as transmitting and receiving elements separated by 10 km. In order for the signal to be detected by the receiver, the power level at the receiver terminals must be at least 1 W. Each antenna is connected to the transmitter and receiver by a lossless 50-22 transmission line. Assuming the antennas are polarization-matched and are aligned so that the maximum intensity of one is directed toward the maximum radiation intensity of the other, determine the minimum power that must be generated by the transmitter so that the signal will be detected by the receiver. Account for the proper losses from the transmitter to the receiver (15 pts) (b) What is the receiving and transmitting gain in the above question if transmitter and receiver has 90% and 80% radiation efficiency respectively?
The minimum power required for the transmitter to achieve a 1W power level at the receiver terminals in a communication system with 100 MHz frequency, using resonant dipole antennas separated by 10 km and lossless transmission lines, is approximately 203.84 W. The receiving and transmitting gains, considering 90% and 80% radiation efficiencies respectively, are approximately 0.3 and 0.3375.
(a) The minimum power that must be generated by the transmitter so that the signal will be detected by the receiver is 203.84 W.
Calculation: Let's start by finding the received power at the receiver terminals: Pr = 1W.
We can find the minimum transmitted power (Pt) from the transmitter to achieve this by accounting for all the losses in between. The overall path loss between the transmitter and receiver can be modeled as:
L = Lp + La1 + Lf + La2Lp = Path loss (this is for free space) La1 and La2 = Attenuation loss due to the antenna's radiation pattern, Lf = Transmission line loss. Since the radiation pattern of the antennas is identical, we can use the Friis transmission equation to find the path loss:
Lp = 32.45 + 20 log10(100 MHz) + 20 log10(10 km) = 32.45 + 80 + 40 = 152.45 dB.
At this point, we need to determine the attenuation loss due to the antenna's radiation pattern. The gain of the antenna in the direction of maximum radiation intensity (which is where we want to direct it) is given by:
G = 1.5 λ / L, where L = length of the antenna = 12λ = wavelength = c / f = (3 x 10^8) / (100 x 10^6) = 3 m.
So, G = (1.5)(3) / 12 = 0.375.
The attenuation loss due to the radiation pattern is given by:
La1 = 10 log10(1 / G^2) = 10 log10(1 / 0.375^2) = 7.78 dB.
Note that this value is the same for both antennas. The transmission line losses are also the same for both antennas since the transmission lines are identical, so we can just consider one of them:
Lf = 10 log10 (Pt / Pr) + 10 log10 (50/22)^2
= 10 log10 (Pt / 1) + 10 log10 (50/22)^2Pt
= 10^(10/10) (L - Lp - La1 - Lf)
= 10^(10/10) (152.45 - 7.78 - 2.11 - 1.41)
= 203.84 W
(b) The transmitting gain and receiving gain are given by:
Gt = radiation efficiency x gain = 0.9 x 0.375 = 0.3375Gr = radiation efficiency x gain = 0.8 x 0.375 = 0.3
Note that the gain is the same for both antennas, so we don't need to calculate two values.
Learn more about attenuation loss at:
brainly.com/question/25124539
#SPJ11
Consider line function f(x,y) = 3x - 2y-6+Z, where Z is your student number mod 3. a) By using DDA algorithm, b) By using Bresenham algorithm, Show your steps and find the pixels to be colored between x = -1 and x=(4+Z).
Answer:
To use the DDA algorithm, we need to determine the slope of the line and the increments for x and y. The slope of the line is given by:
m = (y2 - y1)/(x2 - x1)
In this case, we can rewrite the equation of the line as:
f(x,y) = 3x - 2y + (3-n) (where n is your student number mod 3)
Let's take two points on the line:
P1 = (-1, f(-1,y1)) and P2 = (4+n, f(4+n,y2))
where y1 and y2 are arbitrary values that we will choose later.
The coordinates of P1 are:
x1 = -1 y1 = (3*(-1) - 2y1 + (3-n)) / 2 = (-2y1 + n - 3) / 2
Similarly, the coordinates of P2 are:
x2 = 4 + n y2 = (3*(4+n) - 2y2 + (3-n)) / 2 = (3n - 2*y2 + 15) / 2
The slope of the line is:
m = (y2 - y1)/(x2 - x1) = (3n - 2y2 + 15 - n + 2*y1 - 3) / (4 + n - (-1))
Simplifying this expression, we get:
m = (n - 2y2 + 3y1 + 12) / (n + 5)
Now, we need to determine the increments for x and y. Since we are going from left to right, the increment for x is 1. We can then use the equation of the line to find the corresponding value of y for each value of x.
Starting from P1, we have:
x = -1 y = y1
For each subsequent value of x, we can increment y by:
y += m
And round to the nearest integer to get the pixel value. We repeat this process until we reach x = 4+n.
To use the Bresenham algorithm, we need to choose two points on the line such that the absolute value of the slope is less than or equal to 1. We can use the same points as before and rearrange the equation of the line as:
-2y = (3 - n) - 3
Explanation:
differences between conventional AM and stereo AM
Conventional AM (Amplitude Modulation) and stereo AM (Stereo Amplitude Modulation) are two different methods used in broadcasting audio signals. Here are the main differences between the two:
Audio Transmission:
Conventional AM: In conventional AM, the audio signal is encoded into the amplitude variations of a carrier wave. The carrier wave's amplitude is modulated in proportion to the instantaneous amplitude of the audio signal.
Stereo AM: Stereo AM is an extension of conventional AM that allows for the transmission of stereo audio signals. In stereo AM, the left and right audio channels are encoded separately into the amplitude variations of two carrier waves. These two carrier waves are then combined to form a composite stereo signal.
Carrier Wave Utilization:
Conventional AM: In conventional AM, a single carrier wave is used to carry the audio signal. The amplitude of this carrier wave varies according to the modulating audio signal.
Stereo AM: Stereo AM uses two carrier waves to carry the left and right audio channels separately. The carrier waves are combined in a specific way to form the composite stereo signal.
Receiver Compatibility:
Conventional AM: Conventional AM receivers can only receive and decode the mono audio signal. They are not equipped to decode the stereo audio signal used in stereo AM broadcasting.
- Stereo AM: Stereo AM receivers are specifically designed to decode and separate the left and right audio channels from the composite stereo signal. These receivers can reproduce the stereo audio with proper channel separation.
Bandwidth Requirement:
Conventional AM: Conventional AM requires a bandwidth that is twice the maximum frequency of the audio signal being transmitted. This is because the variations in amplitude occur on both sides of the carrier frequency.
Stereo AM: Stereo AM requires a wider bandwidth compared to conventional AM. The bandwidth is typically four times the maximum frequency of the audio signal. This is because stereo AM involves the transmission of two carrier waves for the left and right channels.
the main difference between conventional AM and stereo AM lies in the transmission of audio signals. Conventional AM carries a mono audio signal using a single carrier wave, while stereo AM transmits a stereo audio signal using two carrier waves. Stereo AM requires specialized receivers to decode the stereo audio, and it also utilizes a wider bandwidth compared to conventional AM.
Learn more about broadcasting ,visit:
https://brainly.com/question/31018470
#SPJ11
Suppose you have gone outside for a short visit. During your visit, you noticed that your mobile phone is showing
very low amounts of charge. Now to charge it you are planning to use a system which provides AC voltage of
114V (rms) and 50 Hz. However, your mobile phone needs to receive a DC voltage of (1.4) V. The
socket mounted in the room gives spike and sometimes its value is higher than the rated value.
To solve the instability problem of the socket output, you need to connect a diode-based circuit to provide a
continuous output to your mobile phone charger.
Criteria:
1) The regular diodes (choose between Ge, Si, GaAs), Zener diode, and resistors can be used to construct the
circuit.
2) The PIV of the diode must exceed the peak value of the AC input.
3) An overcharge protection must be implemented to keep your mobile phone charge from being damaged from
spikes in the voltage.
Based on this criterion, prepare the following:
i) Identify and analyze the circuit with the help of diode application theories and examine the operations of the
identified circuit with appropriate connections and adequate labeling.
ii) Analyze the appropriate label of the input and output voltage wave shapes of the designed circuit with proper
explanations.
To begin with, we need a rectifier circuit which will convert AC voltage into DC voltage. So we will use a bridge rectifier in this case since the AC voltage level of the source is much higher than the voltage level of the mobile phone charger (1.4V).
Thus, bridge rectifier with a capacitor filter is used as a power supply to obtain a smooth DC output. A Zener diode with a low Zener voltage is used to regulate the output voltage of the rectifier.
The voltage rating of the Zener diode should be the same as the output voltage of the bridge rectifier. A resistor is connected in series with the Zener diode to limit the current through the Zener diode.
To know more about diode visit:
https://brainly.com/question/31496229
#SPJ11
The bilinear transformation technique in discrete-time filter design can be applied not to just lowpass filters, but to all kinds of filters. a) (6 points) Let He(s) = 1 Sketch He(j). What kind of filter is this (low-pass, high-pass)? b) (6 points) Find the corresponding he(t). c) (7 points) Apply the bilinear transformations = to find a discrete-time filter Ha(z). Sketch |H₂(e). Is this the same kind of filter? 1+2 d) (6 points) Find the corresponding ha[n].
a) The given transfer function is He(s) = 1.
The magnitude response of this filter can be found using the jω axis instead of s.
To obtain H(jω), s is replaced by jω in He(s) equation and simplifying,
He(s) = 1 = He(jω)
Now, |H(jω)| = 1
Therefore, the given filter is an all-pass filter.
Hence, the kind of filter is all-pass filter.
b) The impulse response, he(t) can be obtained by inverse Laplace transform of the transfer function He(s).He(s) = 1
Here, a= 0, so the inverse Laplace transform of the He(s) function will be an impulse function.
he(t) = L⁻¹{1} = δ(t)
c) The bilinear transformation is given as follows:
z = (1 + T/2 s)/(1 − T/2 s)where T is the sampling period.
Ha(z) is obtained by replacing s in He(s) with the bilinear transformation and simplifying the expression:
Ha(z) = He(s)|s=(2/T)((1−z⁻¹)/(1+z⁻¹))Ha(z) = 1|s=(2/T)((1−z⁻¹)/(1+z⁻¹))Ha(z) = (1−T/2)/(1+T/2) + (1+T/2)/(1+z⁻¹)
The magnitude response of the discrete-time filter is given by:
|H2(e^jw)| = |Ha(z)|z=e^jw = (1−T/2)/(1+T/2) + (1+T/2)/(1−r^(-1) e^(−jω T))
where r= e^(jωT)
The above function represents an all-pass filter of discrete time.
The kind of filter is all-pass filter.
d) The impulse response of the discrete-time filter, ha[n] can be found by taking the inverse z-transform of Ha(z).ha[n] = (1−T/2)δ[n] + (1+T/2) (−1)^n u[n]
Thus, the corresponding ha[n] is (1−T/2)δ[n] + (1+T/2) (−1)^n u[n].
Know more about transfer function:
https://brainly.com/question/28881525
#SPJ11
Determine the molecular geometry for PCi5. O bent O trigonal planar O linear O trigonal bipyramidal
The molecular geometry of PCi5 is trigonal bipyramidal.
To determine the molecular geometry of PCi5, we need to analyze its Lewis structure. The central atom, phosphorus (P), is surrounded by five chlorine (Cl) atoms. Phosphorus has five valence electrons, and each chlorine atom contributes one valence electron, resulting in a total of 10 electrons. Additionally, P forms a covalent bond with each Cl atom, utilizing five electrons.
The Lewis structure of PCi5 shows that all five chlorine atoms are bonded to the central phosphorus atom. Since the central atom has five bonded electron pairs and no lone pairs, the molecular geometry is determined as trigonal bipyramidal. This geometry consists of a central atom with three equatorial positions and two axial positions.
In the trigonal bipyramidal geometry, the three equatorial positions are arranged in a flat triangle, while the two axial positions are located above and below this plane. The bond angles between the equatorial positions are 120 degrees, and the bond angles between the axial positions and the equatorial positions are 90 degrees.
Therefore, the molecular geometry of PCi5 is trigonal bipyramidal, with the central phosphorus atom surrounded by five chlorine atoms in a specific arrangement.
learn more about molecular geometry here:
https://brainly.com/question/31993718
#SPJ11
Design a combinational circuit to convert a 4-bit binary number to gray code using (a) standard logic gates,
(b) decoder,
(c) 8-to-1 multiplexer, (d) 4-to-1 multiplexer.
A combinational circuit is designed to convert a 4-bit binary number to gray code as follows using different methods (standard logic gates, decoder, 8-to-1 multiplexer, and 4-to-1 multiplexer)
:A. Using standard logic gates: A gray code has the property that adjacent values differ by only one bit, so the most significant bit of the gray code is the same as that of the binary number, and each subsequent bit of the gray code is the XOR of the corresponding binary and gray code bits.The following is the design of the combinational circuit to convert a 4-bit binary number to gray code using standard logic gates:
B. Using a decoder: The input of a 4-bit binary number is given as input to the decoder, which produces the corresponding output for the gray code.The following is the design of the combinational circuit to convert a 4-bit binary number to gray code using a decoder:
C. Using an 8-to-1 multiplexer: This method includes the use of an 8-to-1 multiplexer, where the selection lines of the multiplexer are connected to the input binary bits and the output lines of the multiplexer are connected to the corresponding gray code bits.The following is the design of the combinational circuit to convert a 4-bit binary number to gray code using an 8-to-1 multiplexer:
D. Using a 4-to-1 multiplexer: This method includes the use of a 4-to-1 multiplexer, where the selection lines of the multiplexer are connected to the input binary bits, and the output lines of the multiplexer are connected to the corresponding gray code bits.The following is the design of the combinational circuit to convert a 4-bit binary number to gray code using a 4-to-1 multiplexer.
Learn more about Multiplexer here,A four-line multiplexer must have
O two data inputs and four select inputs
O two data inputs and two select inputs
O ...
https://brainly.com/question/30225231
#SPJ11
Donor atoms were ionized and annealed in silicon at a concentration of 10^18 cm^-3, of which 8x10^17 cm^-3 corresponding to 80% was ionized. Write down what the ion implantation concentration measured by SIMS and SRP will be determined respectively. And give examples of situations in which SIMS analysis is more important and SRP analysis is more important.
Implantation concentration determined by SIMS and SRP respectivelyDonor atoms, when ionized and annealed in silicon, are present at a concentration. Out of this concentration, corresponding to 80% were ionized.
SIMS and SRP are two methods used to measure the concentration of implanted ions. SIMS is a highly sensitive analytical method used to determine the concentration of impurities and dopants. SRP or Spreading Resistance Profiling, on the other hand, is used to measure the conductivity of a material.
It is a non-destructive analytical method used to determine the dopant concentration and profile. The ion implantation concentration measured by SIMS and SRP will be determined as follows:SIMS analysis: The concentration of implanted ions in SIMS analysis can be determined.
To know more about concentration visit:
https://brainly.com/question/13872928
#SPJ11
A three phase full wave fully controlled bridge supplied separately excited de motor 240 V, 1450 rpm, 50 A, and 88% efficiency when operating at rated condition. The resistance of the armature 0.5 2 and shunt field 150 2. It drives a load whose torque is constant at rated motor torque." Draw the circuit and find the rated torque in newton-meter. Calculate motor speed if a source voltage drops to 200 V Draw the torque-speed, torque current characteristics.
The rated torque of the motor is 50 Nm. If the source voltage drops to 200 V, the motor speed will decrease. The torque-speed characteristics of the motor can be represented graphically, showing a linear relationship between torque and speed.
To calculate the rated torque, we need to consider the motor's rated current, efficiency, and the resistance of the armature. The rated current is given as 50 A, and the efficiency is stated to be 88%. The resistance of the armature is 0.5 Ω.
The formula to calculate torque in a separately excited DC motor is:
Torque = (V - Ia * Ra) / (2 * π * N * η)
Where:
V = Voltage supplied to the motor (240 V)
Ia = Armature current (50 A)
Ra = Armature resistance (0.5 Ω)
N = Motor speed (in RPM)
η = Efficiency (0.88)
By substituting the given values into the formula, we can find the rated torque:
Torque = (240 - 50 * 0.5) / (2 * π * 1450 / 60 * 0.88)
Torque ≈ 49.81 Nm
Thus, the rated torque of the motor is approximately 49.81 Nm.
To calculate the new motor speed when the source voltage drops to 200 V, we can rearrange the torque formula and solve for N:
N = (V - Ia * Ra) / (2 * π * Torque * η)
By substituting the new values into the formula, we can calculate the new motor speed:
N = (200 - 50 * 0.5) / (2 * π * 49.81 * 0.88)
N ≈ 1336 RPM
Therefore, if the source voltage drops to 200 V, the motor speed will be approximately 1336 RPM.
The rated torque of the motor is found to be approximately 49.81 Nm. If the source voltage drops to 200 V, the motor speed will decrease to approximately 1336 RPM. The torque-speed characteristics of the motor can be plotted on a graph, with torque on the y-axis and speed on the x-axis. The graph will show a linear relationship between torque and speed, indicating that the torque remains constant at the rated torque while the speed decreases as the load increases or the source voltage drops.
To know more about Torque, visit
https://brainly.com/question/32667741
#SPJ11
Using Python 3.7.4:
Write a single statement that will print the message "first is " followed by the value of first, and then a space, followed by "second = ", followed by the value of second. Print everything on one line and go to a new line after printing. Assume that the variables have already been given values.
The single statement would be: print(f"first is {first} second = {second}")
In Python 3.7.4, formatted string literals, also known as f-strings, provide a concise way to embed expressions inside string literals. They are prefixed with the 'f' character and allow you to include variables or expressions within curly braces {}.
To print the desired message on one line, you can use an f-string with placeholders for the values of the variables 'first' and 'second'. By placing the variables inside the curly braces preceded by a dollar sign ($), Python will replace the placeholders with their corresponding values.
The statement "print(f"first is {first} second = {second}")" achieves this by combining the static parts of the message ("first is ", "second = ") with the values of the variables 'first' and 'second' using f-string formatting. The print() function is then used to output the formatted message to the console.
After printing the message, the program automatically goes to a new line due to the default behavior of the print() function.
Learn more about Python here:
https://brainly.com/question/30391554
#SPJ11
1.discussion and conclusion of generation and measurement of AC voltage
2 the objectives of lightning breakdown voltage test of transformer oil
1. Generation and measurement of AC voltage:AC voltage or alternating current voltage is one of the primary types of electrical voltage. It can be generated using various devices like generators, transformers, and alternators.
The measurement of AC voltage is done using instruments like voltmeters and oscilloscopes. AC voltage is vital for power transmission and distribution.2. Objectives of lightning breakdown voltage test of transformer oil:Lightning breakdown voltage test of transformer oil is performed to check the quality of transformer oil. The objectives of the test are to check the dielectric strength of the oil, the presence of impurities and moisture in the oil, and to ensure that the oil can withstand electrical stresses. The test is performed by applying a voltage to the oil until it breaks down. The voltage required to break down the oil is known as the breakdown voltage, and it is an indicator of the quality of the oil. This test is critical as it helps ensure that the transformer is protected from lightning strikes and other electrical stresses.
Know more about electrical voltage, here:
https://brainly.com/question/16154848
#SPJ11
A 3.3 F supercapacitor is connected in series with a 0.007 Ω resistor across a 2 V DC supply. If the capacitor is initially discharged find the time taken for the capacitor to reach 70% of the DC supply voltage. Give your answers in milliseconds (1 second = 1000 milliseconds) correct to 1 decimal place.
The time taken for the capacitor to reach 70% of the DC supply voltage is 35.2 ms (milliseconds
Given,Initial Voltage across the capacitor, V₀ = 0 VFinal Voltage across the capacitor, Vf = 70% of DC Supply Voltage = 0.7 × 2 V = 1.4 VResistance in the circuit, R = 0.007 ΩCapacitance of the capacitor, C = 3.3 FThe time constant of the circuit is given by:τ = RCSubstituting the given values,τ = (3.3 F) (0.007 Ω) = 0.0231 sThe voltage across the capacitor at time t is given by:V = V₀ (1 - e^(-t/τ))At t = time taken for the capacitor to reach 70% of the DC supply voltageV = Vf = 1.4 V0.7 = 1 - e^(-t/τ)Solving for t, we get:t = -τ ln (1 - 0.7)Substituting the value of τ, we gett = -0.0231 s ln (0.3) = 0.0352 s = 35.2 msTherefore, the time taken for the capacitor to reach 70% of the DC supply voltage is 35.2 ms (milliseconds).
Learn more about DC here,Explain alternating current and direct current. Include two ways that they are alike and one way that they are different...
https://brainly.com/question/10715323
#SPJ11
A 5 kVA, 2400-120/240 volt distribution transformer when given a short
circuit test had 94.2 volts applied with rated current flowing in the shortcircuited wiring. What is the per unit impedance of the transformer?
Answer: Zpu = 0.0392
The per unit impedance of the transformer is 0.0392.
A 5 kVA, 2400-120/240 volt distribution transformer when given a short-circuit test had 94.2 volts applied with rated current flowing in the short-circuited wiring. The per unit impedance of the transformer is 0.0392. The formula for per unit impedance of a transformer is given as follows:Zpu=Vshort_circuit/(√3*Vrated*Isc)Where, Zpu is the per unit impedance of transformerVshort_circuit is the voltage applied during short-circuit testVrated is the rated voltage of transformerIsc is the current during short-circuit testSubstituting the given values in the formula, we get:Zpu=94.2/(√3*240*Isc)Substituting the value of rated power (5 kVA) in terms of rated voltage and current, we get:P=Vrated×Irated5kVA=2400×IratedIrated=5kVA/2400Irated=2.083 ASubstituting the value of rated current (Irated) in the formula, we get:Zpu=94.2/(√3*240*2.083)Zpu=0.0392Hence, the per unit impedance of the transformer is 0.0392.
Learn more about Transformer here,A transformer has a primary coil with 20 turns, and a secondary coil with 2000 turns. The
input voltage is 120 V, and it...
https://brainly.com/question/30612582
#SPJ11
Within the Discussion Board area, write 400-600 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas. Describe in detail the typical components that make up a microcontroller, including their roles, responsibilities and interaction with each other and the outside world. Be specific.
A microcontroller is comprised of various components that work together to provide processing power and control in embedded systems.
`These components include the central processing unit (CPU), memory, input/output (I/O) ports, timers/counters, and peripherals. Each component has a specific role and interacts with each other and the outside world to enable the microcontroller's functionality. The central processing unit (CPU) is the core component of a microcontroller and is responsible for executing instructions. It consists of an arithmetic logic unit (ALU), a control unit, and registers. The CPU fetches instructions from memory, performs calculations, and controls the overall operation of the microcontroller. Memory plays a crucial role in a microcontroller as it stores program instructions and data. It includes non-volatile memory (such as flash memory) to store the program code permanently, and volatile memory (such as random-access memory or RAM) for temporary data storage during program execution.
Learn more about the microcontroller's functionality here:
https://brainly.com/question/31856333
#SPJ11
Write two RISC-V procedures equivalent to the following C functions and then write a program that uses both procedures to: 1) initialize a 10 elements integer array starting at address 2000 and 2) compute the sum of all values between the first and last element of the array. Use standard registers for passing and returning. Note that the second C function is recursive and must be implemented as a recursive RISC-V procedure
Two RISC-V procedures equivalent to the given C functions are implemented. The first procedure initializes a 10-element integer array starting at address 2000. The second procedure recursively computes the sum of all values between the first and last element of the array. The program utilizes these procedures to initialize the array and calculate the sum.
To initialize the array, we can create a RISC-V procedure that takes the starting address of the array as an argument. The procedure would use a loop to store consecutive integer values in the memory locations of the array. Starting from the provided address, it would store values from 0 to 9 in the array using a register as a counter variable. This procedure ensures the array is initialized with the expected values.
For computing the sum recursively, we can implement a RISC-V procedure that takes the starting address and the number of elements in the array as arguments. The procedure checks if the number of elements is 1, in which case it returns the value at the given address. Otherwise, it recursively calls itself, passing the incremented address and the decremented count. It adds the value at the current address to the sum obtained from the recursive call and returns the final sum.
To use these procedures, we can write a main program that first calls the initialization procedure, passing the starting address of the array. Then, it calls the recursive sum procedure, passing the starting address and the number of elements (10 in this case). Finally, it prints the calculated sum. This program effectively initializes the array and computes the sum of its elements between the first and last index using the implemented RISC-V procedures.
Learn more about recursively here:
https://brainly.com/question/32344376
#SPJ11
use c language to solve the questions
In this project, you need to implement the major parts of the functions you created in phase one as follows:
void displayMainMenu(); // displays the main menu shown above
This function will remain similar to that in phase one with one minor addition which is the option:
4- Print Student List
void addStudent( int ids[], double avgs[], int *size);
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive a pointer to an integer which references the current size of the list (number of students in the list).
The function will check to see if the list is not full. If list is not full ( size < MAXSIZE) then it will ask the user to enter the student id (four digit number you do NOT have to check just assume it is always four digits) and then search for the appropriate position ( id numbers should be added in ascending order ) of the given id number and if the id number is already in the list it will display an error message. If not, the function will shift all the ids starting from the position of the new id to the right of the array and then insert the new id into that position. Same will be done to add the avg of the student to the avgs array.
void removeStudent(int ids[], double avgs[], int *size);
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive a pointer to an integer which references the current size of the list (number of students in the list).
The function will check if the list is not empty. If it is not empty (size > 0) then it will search for the id number to be removed and if not found will display an error message. If the id number exists, the function will remove it and shift all the elements that follow it to the left of the array. Same will be done to remove the avg of the student from the avgs array.
void searchForStudent(int ids[], double avgs[], int size);
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive an integer which has the value of the current size of the list (number of students in the list).
The function will check if the list is not empty. If it is not empty (size > 0) then it will ask the user to enter an id number and will search for that id number. If the id number is not found, it will display an error message.
If the id number is found then it will be displayed along with the avg in a suitable format on the screen.
void uploadDataFile ( int ids[], int avgs[], int *size );
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive a pointer to an integer which references the current size of the list (number of students in the list).
The function will open a file called students.txt for reading and will read all the student id numbers and avgs and store them in the arrays.
void updateDataFile(int ids[], double avgs[], int size);
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive an integer which has the value of the current size of the list (number of students in the list).
The function will open the file called students.txt for writing and will write all the student id numbers and avgs in the arrays to that file.
void printStudents (int ids[], double avgs[], int size); // NEW FUNCTION
This function will receive the arrays containing the id numbers and the avgs as parameters. It will also receive an integer which has the value of the current size of the list (number of students in the list).
This function will print the information (ids and avgs) currently stored in the arrays.
Note: You need to define a constant called MAXSIZE ( max number of students that may be stored in the ids and avgs arrays) equal to 100.
IMPORTANT NOTE: Your functions should have exactly the same number of parameters and types as described above and should use parallel arrays and work as described in each function. You are not allowed to use structures to do this project.
Items that should be turned in by each student:
1. A copy of your main.c file
2. An MSWord document containing sequential images of a complete run similar to the output shown on pages 4-8
SAMPLE RUN:
Make sure your program works very similar to the following sample run:
Assuming that at the beginning of the run file students.txt has the following information stored (first column = ids and second column = avgs):
1234 72.5
2345 81.2
Here's a C implementation of the functions described in the question:
#include <stdio.h>
#define MAXSIZE 100
void displayMainMenu();
void addStudent(int ids[], double avgs[], int *size);
void removeStudent(int ids[], double avgs[], int *size);
void searchForStudent(int ids[], double avgs[], int size);
void uploadDataFile(int ids[], double avgs[], int *size);
void updateDataFile(int ids[], double avgs[], int size);
void printStudents(int ids[], double avgs[], int size);
int main() {
int ids[MAXSIZE];
double avgs[MAXSIZE];
int size = 0;
displayMainMenu();
return 0;
}
void displayMainMenu() {
printf("Main Menu:\n");
printf("1- Add Student\n");
printf("2- Remove Student\n");
printf("3- Search for Student\n");
printf("4- Print Student List\n");
printf("5- Upload Data File\n");
printf("6- Update Data File\n");
printf("Enter your choice: ");
int choice;
scanf("%d", &choice);
switch (choice) {
case 1:
addStudent(ids, avgs, &size);
break;
case 2:
removeStudent(ids, avgs, &size);
break;
case 3:
searchForStudent(ids, avgs, size);
break;
case 4:
printStudents(ids, avgs, size);
break;
case 5:
uploadDataFile(ids, avgs, &size);
break;
case 6:
updateDataFile(ids, avgs, size);
break;
default:
printf("Invalid choice. Please try again.\n");
}
}
void addStudent(int ids[], double avgs[], int *size) {
if (*size >= MAXSIZE) {
printf("Student list is full. Cannot add more students.\n");
return;
}
int newId;
printf("Enter the student id: ");
scanf("%d", &newId);
// Check if the id already exists
for (int i = 0; i < *size; i++) {
if (ids[i] == newId) {
printf("Error: Student with the same id already exists.\n");
return;
}
}
// Find the appropriate position to insert the new id
int pos = 0;
while (pos < *size && ids[pos] < newId) {
pos++;
}
// Shift the ids and avgs to the right
for (int i = *size; i > pos; i--) {
ids[i] = ids[i - 1];
avgs[i] = avgs[i - 1];
}
// Insert the new id and avg
ids[pos] = newId;
printf("Enter the student average: ");
scanf("%lf", &avgs[pos]);
(*size)++;
printf("Student added successfully.\n");
}
void removeStudent(int ids[], double avgs[], int *size) {
if (*size <= 0) {
printf("Student list is empty. Cannot remove students.\n");
return;
}
int removeId;
printf("Enter the student id to remove: ");
scanf("%d", &removeId);
// Search for the id to be removed
int pos = -1;
for (int i = 0; i < *size; i++) {
if (ids[i] == removeId) {
pos = i;
Learn more about C language:
https://brainly.com/question/31346025
#SPJ11
Fourier transform of a continuous-time signal r(t) is defined as X(f) = a(t) exp(-j2n ft)dt. (1) Discrete Fourier transform of a discrete-time signal x(n), n = 0, 1, ..., N-1, of duration = N samples is defined as N-1 X(k)= x(n) exp(-j2kn/N), for k= 0, 1,..., N - 1. (2) n=0 Direct computation of discrete Fourier transform through Eq. (2) requires about N2 multiplications. The fast Fourier transform (FFT) algorithm is a computationally efficient method of computing this discrete Fourier transform. It requires about N log₂ (N) multiplications.
That is correct. The Fast Fourier Transform (FFT) algorithm is an efficient algorithm used to compute the Discrete Fourier Transform (DFT) of a sequence of N samples. The DFT is a transformation that converts a discrete-time signal from the time domain into the frequency domain.
The DFT formula you provided in equation (2) calculates each term individually by performing N complex multiplications. Directly computing the DFT using this formula requires O(N^2) operations, which can be computationally expensive for large values of N.
On the other hand, the FFT algorithm exploits certain properties of the DFT to reduce the computational complexity. It achieves this by dividing the DFT computation into smaller sub-problems and recursively combining their results. The FFT algorithm has a computational complexity of O(N log₂(N)), which is significantly faster than the direct computation.
By using the FFT algorithm, the number of multiplications required for calculating the DFT is greatly reduced, resulting in a more efficient and faster computation. This makes the FFT algorithm widely used in various applications involving Fourier analysis, such as signal processing, image processing, and communications.
Learn more about Fast Fourier Transform here:
https://brainly.com/question/32197572
#SPJ11
Design the FIR filter to meet the following specifications. Passband ripple ≤ 0.6 dB Passband Frequency = 8 kHz Stopband Attenuation ≥ 55 dB Stopband Frequency = 12 kHz Sampling Frequency = 48 kHz Determine the followings: i) ii) iii) (iii) Sketch the filter according to the specification above. Determine the category of the filter. Determine the Filter Order/Length, N by using Optimal Method and Windowmethod. Calculate the first 4 values of filter coefficients, h(n) based on Optimal method.
To design an FIR filter with the given specifications:
Passband ripple ≤ 0.6 dB,
Passband Frequency = 8 kHz,
Stopband Attenuation ≥ 55 dB,
Stopband Frequency = 12 kHz, and
Sampling Frequency = 48 kHz.
We will determine the filter category, filter order/length (N) using the Optimal method, and calculate the first four values of the filter coefficients (h(n)).
(i) Sketching the Filter:
To sketch the filter, we need to determine the passband and stopband frequencies. The passband frequency is 8 kHz, and the stopband frequency is 12 kHz. We draw a plot with frequency on the x-axis and magnitude on the y-axis, showing a passband with a ripple of ≤ 0.6 dB and a stopband with an attenuation of ≥ 55 dB.
(ii) Determining the Filter Category:
Based on the given specifications, we need a low-pass filter. A low-pass filter allows frequencies below a certain cutoff frequency to pass through while attenuating frequencies above it.
(iii) Determining Filter Order/Length (N) using the Optimal Method:
N = (Fs / Δf) + 1,
where Fs is the sampling frequency and Δf is the transition width between the passband and stopband.
Substituting Fs = 48 kHz and Δf = |12 kHz - 8 kHz| = 4 kHz,
we get
N = (48 kHz / 4 kHz) + 1 = 13.
(iv) Calculating Filter Coefficients (h(n)) using the Hamming window:
h(n) = w(n) × sinC(n - (N-1)/2),
where w(n) is the window function and sinc is the ideal low-pass filter impulse response.
Using the Hamming window:
w(n) = 0.54 - 0.46 × cos((2πn) / (N-1)).
Substitute the values of N and desired passband frequency (8 kHz) into the equations to calculate the filter coefficients h(n) for n = 0, 1, 2, 3.
By following these equations and calculations, we can design an FIR filter that meets the given specifications.
Learn more about frequency here:
https://brainly.com/question/31477823
#SPJ11
Inside a square conductive material, a static magnetic field given by the expression H(x,y,z) = z ay + y az (A/m) is present. Evaluate the current circulating inside the material. The amperian loop is shown in the figure below. (Use the left or the right side of stokes theorem) A(0,1,3) D(0,3,3) Amperian loop IX/ B(0,1,1) Select one: a. b C d None of these 12 A BA 4A C(0,3,1) Conductive material Y
Answer : The current circulating inside the material is zero. The correct option is None of these.
Explanation :
We can use Ampere's Law for the evaluation of the current circulating inside the material given a static magnetic field and an Amperian loop.
Ampere's law can be written in terms of the circulation of a magnetic field around a closed loop asCirculation of B field around the loop = u_0 * (current enclosed by the loop)Here, u_0 is the permeability of free space and it has a value of 4π × 10^-7 T m/A.
The loop enclosed by the magnetic field in this problem is rectangular in shape. From the diagram given, it is clear that we have to divide the rectangular loop into two parts: left and right. Then, we can apply Ampere's Law to each part separately.
The currents in the left and right sides of the loop are equal and opposite in direction. Therefore, their contributions cancel out. Hence, the net current enclosed by the loop is zero. Therefore, the current circulating inside the material is zero. Answer: None of these.
Learn more about Ampere's law here https://brainly.com/question/32676356
#SPJ11
What happens when you test an insulating cable and there is current?
When you test an insulating cable and there is current, it implies that the cable insulation is faulty. This is because good cable insulation should not allow current to flow through it, as its primary function is to prevent the flow of current through the conductor into the environment.
Cable insulation is the material that surrounds the conducting core of an electric cable, preventing current leakage and helping to prevent electrical shocks. The insulating layer must be thick enough to withstand the voltage applied across it and must also be of sufficient quality to prevent current leakage.What is a faulty insulation?An electric cable's insulation may degrade due to a variety of causes, including overheating, mechanical harm, age, and contact with chemicals. When the insulation fails, current begins to flow through the cable insulation, resulting in cable damage, electrical shorts, and the risk of electrical fires. Therefore, It is crucial to test cable insulation before and after installation to ensure that it is functional.
Know more about Cable insulation here:
https://brainly.com/question/32889827
#SPJ11
(20 pts) In the approach of ‘combinational-array-multiplier’ (CAM) described in
class using array of full-adders, answer the following questions.
(a) Determine the exact number of AND gates and full-adders needed to build a
CAM for unsigned 48-bit multiplication.
(b) What is the worst-case delay for a 48-bit CAM?
(c) Clearly show how a 3-bit CAM processes the multiplication of 111×111 through
all full adders to reach the correct result. Also determine the exact delay (in
d) it takes to reach the result?
(d) Redo problem (c) for 110 × 101
For the multiplication of unsigned 48-bit, the number of AND gates required is equal to the product of 48 bits and 48 bits, which is 2304, while the number of full-adders required is equal to 48.
In the worst-case scenario, the delay is equal to the time it takes to perform one complete multiplication, which is equal to 48 gate delays plus 47 ripple carry delays. Each gate delay is equal to the sum of the delay due to the input capacitance, intrinsic delay, and output capacitance of the gate.
For the multiplication of 111×111 through a 3-bit CAM, the first 3-bit adder will produce a sum of 011 with a carry of 1, while the second 3-bit adder will produce a sum of 110 with a carry of 1. The last 3-bit adder will produce a sum of 101 with no carry. The total delay is equal to the time it takes to propagate the carry from the first adder to the last adder.
To know more about multiplication visit:
https://brainly.com/question/11527721
#SPJ11
A voltage signal has a fundamental rms value of V1 = 242 V and three harmonic contents: V2 = 42 V, V3 = 39 V and V5 = 45 V. Calculate the Distortion Factor, DF rounded to the nearest three decimal digits .
The distortion factor rounded to the nearest three decimal digits is: 0.301(approx)
Explanation:
What is the distortion factor?
The Distortion Factor (DF) is a measure of the distortion present in a signal compared to its fundamental component. It quantifies the presence of harmonic components in relation to the fundamental component of a signal.
To calculate the Distortion Factor (DF) of a voltage signal with fundamental and harmonic components, you can use the following formula:
DF = sqrt((V2^2 + V3^2 + V4^2 + ...) / V1^2)
In this case, we have the following values:
V1 = 242 V (fundamental component)
V2 = 42 V (2nd harmonic component)
V3 = 39 V (3rd harmonic component)
V5 = 45 V (5th harmonic component)
Let's calculate the DF:
DF = sqrt((V2^2 + V3^2 + V5^2) / V1^2)
= sqrt((42^2 + 39^2 + 45^2) / 242^2)
= sqrt((1764 + 1521 + 2025) / 58604)
= sqrt(5310 / 58604)
≈ sqrt(0.090609)
≈ 0.301
Learn more about the Distortion factor:
https://brainly.com/question/30198365
#SPJ11
Define a relation R from {a,b,c} to {u, v} as follows: R = {(a, v), (b, u), (b, v), (C, u)}. (a) Draw an arrow diagram for R. (b) Is R a function? Why or why not?
a) Arrow diagram for R: b) Is R a function Why or why not Given relation R from {a,b,c} to {u, v} as R = {(a, v), (b, u), (b, v), (C, u)}.Now, to check whether the given relation is a function or not, we check if the relation satisfies the following property:
Each element of the set A is related to only one element of the set B.In other words, if (a, b) and (a, c) both belong to the given relation, then b=c for it to be a function. Given R = {(a, v), (b, u), (b, v), (c, u)}.(a) a is related to v. Thus, a can only be related to one element.(b) b is related to u and v.
Thus, b is not related to only one element.(c) c is related to u. Thus, c can only be related to one element.Since element b in the set A is related to two elements u and v in set B, it does not satisfy the property of a function and hence R is not a function.
To know more about Arrow diagram visit:
https://brainly.com/question/8223738
#SPJ11
Can someone make an example of this problem in regular C code. Thank You.
Write a program that tells what coins to give out for any amount of change from 1 cent to 99 cents.
For example, if the amount is 86 cents, the output would be something like the following:
86 cents can be given as 3 quarter(s) 1 dime(s) and 1 penny(pennies)
Use coin denominations of 25 cents (quarters), 10 cents (dimes), and 1 cent (pennies). Do not use nickel
and half-dollar coins.
Use functions like computeCoins. Note: Use integer division and the % operator to implement this
function
The C code that solves the problem of giving out the correct coins for any amount of change from 1 cent to 99 cents:
#include <stdio.h>
void computeCoins(int amount, int* quarters, int* dimes, int* pennies) {
*quarters = amount / 25;
amount %= 25;
*dimes = amount / 10;
amount %= 10;
*pennies = amount;
}
void displayCoins(int amount) {
int quarters, dimes, pennies;
computeCoins(amount, &quarters, &dimes, &pennies);
printf("%d cents can be given as %d quarter(s), %d dime(s), and %d penny(pennies)\n", amount, quarters, dimes, pennies);
}
int main() {
int amount;
for (amount = 1; amount <= 99; amount++) {
displayCoins(amount);
}
return 0;
}
1. In this program, the computeCoins function takes an amount as input and calculates the number of quarters, dimes, and pennies required to give out that amount of change. It uses integer division (/) and the modulo (%) operator to compute the number of each coin denomination.
2. In the main function, the user is prompted to enter the amount of change in cents. The amount is then passed to the computeCoins function, which displays the result in coin dominations.
3. Note that this program assumes valid input within the range of 1-99 cents. You can modify it to include additional input validation if needed.
To learn more about c code visit :
https://brainly.com/question/30101710
#SPJ11
A 1000-MVA 20-kV, 60-Hz three-phase generator is connected through a 1000-MVA 20- kV A/138-kV Y transformer to a 138-kV circuit breaker and a 138-kV transmission line. The generator reactances are X = 0.15 p.u., X = 0.45 p.u., and Xd=1.8 p.u... The transformer series reactance is 0.1 p.u.; transformer losses and exciting current are neglected. A three-phase short-circuit occurs on the line side of the circuit breaker when the generator is operated at rated terminal voltage and at no-load. Determine the subtransient current through the breaker in kA rms ignoring any dc offset.
Given, MVA base = 1000 MVA, kV base = 20 kV, Zbase = (kVbase)^2/MVAbase= 0.4 ohm Subtransient reactance Xd = 1.8 pu, Synchronous reactance Xs = 0.15 pu, Transient reactance Xd' = 0.45 pu.
Transformer series reactance X1 = 0.1 puLet's draw the impedance diagram for the given circuit.To determine the subtransient current, we have to first find the Thevenin's equivalent impedance looking from the line side of the circuit breaker.Thevenin's equivalent impedance
, ZTh = Zgen + Ztr + Z'gen = [(Xs + Xd' ) + j(X1 + Xd)] + jX1 = (0.6 + j0.8) ohm.
Thevenin's equivalent voltage, VTh = Vn = 20 kV.
When a three-phase short-circuit occurs on the line side of the circuit breaker, the fault current through the circuit breaker is given by:
[tex]Isc = VTh / ZTh = (20 / √3) / (0.6 + j0.8) = 19.35 / 63.43 ∠ 52.9° = 0.305 kA rms ≈ 305[/tex]
ARounding off the value to the nearest integer, the subtransient current through the breaker in kA rms is 305 A.
To knwo more about Synchronous visit:
https://brainly.com/question/27189278
#SPJ11
III: Answer the following questions: 1. Find the value of a resistor having the following colors, orange, orange, brown, red? 2. A series-ohmmeter is used to measure the resistance of a given resistor. The ammeter reading is 0.5A, the ammeter resistance is 1.292, the series resistance is 2.42, and the ohmmeter battery is 9V. a) Draw the practical circuit for this measurement? b) Find the full-scale deflection? c) Find the half-deflection resistance of the ohmmeter? d) Determine the resistance value? Question IV: Answer the following questions: 1. A digital counter-timer of reference frequency 20MHz is used for measuring the phase shift between two equal frequency signals. The number of oscillator pulses for the positive signal duration is 45 while it is 15 for the time shift between the two signals. Find the phase shift? 2. Briefly describe four different types of temperature sensors.
The resistor with the colors orange, orange, brown, red has a value of 3300 ohms or 3.3 kilohms. The phase shift between two equal frequency signals can be calculated as (15 / 45) * 360 degrees.
III:
1. The resistor with the color code orange, orange, brown, red has a value of 3300 ohms or 3.3 kilohms.
2. a) The practical circuit for measuring the resistance using a series-ohmmeter (frequency) consists of the resistor under test connected in series with the ammeter, series resistance, and the ohmmeter battery.
b) The full-scale deflection is the maximum current the ammeter can measure. In this case, the full-scale deflection is 0.5A.
c) The half-deflection resistance of the ohmmeter can be found using the formula Rh = (Vb / 2) / Im, where Vb is the battery voltage (9V) and Im is the ammeter reading (0.5A).
d) To determine the resistance value, we subtract the series resistance from the measured resistance. The measured resistance is the resistance reading on the ammeter.
Question IV:
1. The phase shift can be calculated using the formula: Phase Shift = (Number of Oscillator Pulses for Time Shift / Number of Oscillator Pulses for Positive Signal Duration) * 360 degrees. In this case, the phase shift is (15 / 45) * 360 degrees.
2. Four different types of temperature sensors are: thermocouples, resistance temperature detectors (RTDs), thermistors, and infrared (IR) temperature sensors.
Thermocouples generate a voltage proportional to temperature, RTDs change resistance with temperature, thermistors are resistors with temperature-dependent resistance, and IR temperature sensors measure temperature based on the emitted infrared radiation.
Learn more about resistor:
https://brainly.com/question/24858512
#SPJ11
Show that, if the stator resistance of a three-phase induction motor is negligible, the ratio of motor starting torque T, to the maximum torque Tmax can be expressed as: Tmax 2 1 Sm 1 where sm is the per-unit slip at which the maximum torque occurs. (10 marks)
The starting torque, T, of an induction motor can be calculated using the following expression: T = 3(Vph^2 / 2ωmR2), where Vph is the phase voltage at the stator, ωm is the mechanical frequency of the rotor, and R2 is the rotor resistance.
When the stator resistance of the three-phase induction motor is negligible, the rotor frequency is approximately equal to the synchronous speed, ωs. Therefore, the slip, s, can be calculated as follows: s = (ωs - ωr) / ωs, where ωr is the rotor speed.
Since the stator resistance is negligible, the rotor current can be expressed as I2 = Vph / X2, where X2 is the rotor reactance.
Tmax can be determined using the following expression: Tmax = 3Vph^2 / 2(ωsX2)
When the rotor slip, s, equals the per-unit slip, sm, at which Tmax occurs, the following can be derived from the above expressions: sm = (ωs - ωTmax) / ωs, where ωTmax is the mechanical frequency of the rotor at which Tmax occurs.
Thus, the starting torque to maximum torque ratio, T / Tmax, can be expressed as follows:
T / Tmax = 3(Vph^2 / 2ωmR2) / [3Vph^2 / 2(ωsX2)] = sm / (2 - sm) = (Tmax / T) - 1
Therefore, the ratio of motor starting torque T, to the maximum torque Tmax can be expressed as: Tmax 2 1 Sm 1, which is in agreement with the given statement.
Know more about starting torque here:
https://brainly.com/question/30461370
#SPJ11
A filter has the following coefficients: h[0] = -0.032, h[1] = 0.038, h[2] = 0.048, h[3] = -0.048, h[4] = 0.048, h[5] = 0.038, h[6] = -0.032. Select all the applicable answers. (Note that marks won't be awarded for partial answer). This is an FIR filter This is an IR filter This is Type 1 FIR filter This is Type 3 FIR filter This filter has a linear phase response This filter has a non-linear phase response This filter has feedback This filter has no feedback This filter is always stable This filter could be unstable This filter has poles and zeros
the given filter could be unstable if all the poles are outside the unit circle.Poles and Zeros: Yes, the given filter has poles and zeros.
Filter is a device that is used to remove unwanted frequencies from a signal, or to amplify some frequencies and reduce others. FIR is an abbreviation for Finite Impulse Response, which is a type of filter that uses a finite number of weights or coefficients. FIR filters have a number of advantages over other types of filters,
Let's analyze the given filter using the mentioned parameters. FIR Filter: Yes, the given filter is an FIR filter because it has a finite number of coefficients.IR Filter: No, the given filter is not an IR filter because there is no such filter known as IR filter.
To know more about unstable visit:
https://brainly.com/question/30894938
#SPJ11
SQL
Given are the relations:
department : {deptno, deptname}
employee : {employeeid, name, salary, deptno}
A department is stored with its number (deptno) and name (deptname). An employee is stored with his id (employeeid), name, salary, and the department he is working in (deptno).
Answer the following question using SQL: Return a list of all department numbers with their name and their number of employees (not all departments have employees).
The SQL code for the output .
Given,
SQL
Code:
Select d.dno, dname, count(eno) as numberofemployees
from department as d left outer join employee as e on(e.dno = d.dno)
group by d.dno;
We have used left outer join as it will also include department with 0 employees while normal join will only include tuples where e.eno = d.dno.
Then we have groupes it by d. dno that will group it by department no.
Know more about SQL,
https://brainly.com/question/31663284
#SPJ4