Therefore, when the tank containing 2 liters of propane is heated from 20°C to 40°C, its volume would be approximately 2.14 liters.
To calculate the volume of the tank containing propane when it is heated from 20°C to 40°C, we need to convert the temperatures to absolute form (Kelvin) before applying the gas law equation. The relationship between temperature and volume at constant pressure is given by Charles's Law.
Given:
Initial temperature (T1) = 20°C = 293.15 K (adding 273.15 to convert to Kelvin)
Initial volume (V1) = 2 liters
Final temperature (T2) = 40°C = 313.15 K
Using Charles's Law:
V1 / T1 = V2 / T2
Solving for V2:
V2 = V1 × (T2 / T1)
V2 = 2 liters × (313.15 K / 293.15 K)
V2 ≈ 2.14 liters
To know more about volume,
https://brainly.com/question/17878237
#SPJ11
What is the structure and molecular formula of the compound using the information from the IR, 1H and 13C NMR, and the mass spec of 188? please also assign all of the peaks in the 1H and 13C spectra to the carbons and hydrogens that gove rise to the signal
The structure and molecular formula of the compound using the information from the IR, 1H, and 13C NMR, and the mass spec of 188:The mass spectrometry data suggests that the molecular weight of the compound is 188 g/mol. So, the molecular formula of the compound can be deduced as C10H14O.The IR spectrum of the compound showed a strong peak at around 1680 cm-1 that indicates the presence of a carbonyl group (C=O).
This carbonyl peak suggests the presence of a ketone group.The 1H NMR spectrum of the compound showed six different chemical shifts, which implies that there are six distinct hydrogen environments in the compound. There is a singlet at 3.7 ppm that corresponds to the methoxy group (-OCH3), a quartet at 2.2 ppm corresponding to the alpha-protons next to the carbonyl group, a doublet at 2.3 ppm corresponding to the beta-protons next to the carbonyl group, a doublet at 2.5 ppm corresponding to the methyl group, a singlet at 6.9 ppm corresponding to the protons of the phenyl ring, and a singlet at 7.3 ppm corresponding to the protons of the vinyl group.The 13C NMR spectrum of the compound showed ten different chemical shifts.
There are ten carbons in the compound: one carbonyl carbon at 199.5 ppm, two olefinic carbons at 144.2 ppm and 130.3 ppm, one aromatic carbon at 128.4 ppm, one methoxy carbon at 56.3 ppm, one methyl carbon at 21.9 ppm, and four aliphatic carbons in the range of 30-35 ppm.
To know more about molecular formula visit:-
https://brainly.com/question/29435366
#SPJ11
AC is a diameter of OE, the area of the
circle is 289 units², and AB = 16 units.
Find BC and mBC.
B
A
C
E
PLS HELP PLSSSS before i cry
BC is 30 units and mBC is approximately 61.93 degrees.
Given that AC is a diameter of the circle OE, we can deduce that triangle ABC is a right triangle, with AC being the hypotenuse.
We are given that the area of the circle is 289π square units, which implies that the radius of the circle is 17 units (since the formula for the area of a circle is A = πr^2).
Since AC is the diameter, its length is twice the radius, which means AC = 2 * 17 = 34 units.
We are also given that AB = 16 units.
Using the Pythagorean theorem, we can find BC and the measure of angle BC.
In the right triangle ABC, we have:
AB^2 + BC^2 = AC^2
Substituting the given values, we get:
16^2 + BC^2 = 34^2
256 + BC^2 = 1156
BC^2 = 1156 - 256
BC^2 = 900
Taking the square root of both sides, we find:
BC = √900
BC = 30 units
Therefore, BC is 30 units.
To find the measure of angle BC, we can use trigonometry. Since we know the lengths of the sides, we can use the inverse tangent function (tan^(-1)) to find the angle.
mBC = tan^(-1)(opposite/adjacent) = tan^(-1)(BC/AB) = tan^(-1)(30/16)
Using a calculator, we find that mBC ≈ 61.93 degrees.
Therefore, BC is 30 units and mBC is approximately 61.93 degrees.
for such more question on diameter
https://brainly.com/question/28700310
#SPJ8
how
to solve each step
26. The mass of an iron-56 nucleus is 55.92066 units. a. What is the mass defect of this nucleus? b. What is the binding energy of the nucleus? c. Find the binding energy per nucleon.
a. The mass defect of an iron-56 nucleus is 0.04334 units.
b. The binding energy of the nucleus is 492.52 MeV.
c. The binding energy per nucleon is 8.804 MeV.
The mass defect of an iron-56 nucleus is 0.04334 units. The mass defect is the difference between the mass of the nucleus and the sum of the masses of its individual protons and neutrons. It represents the mass that is converted into energy during the formation of the nucleus.
The binding energy of the nucleus is 492.52 MeV. The binding energy is the energy required to completely separate the nucleons (protons and neutrons) in the nucleus. It is a measure of the stability of the nucleus. The binding energy is equivalent to the mass defect of the nucleus multiplied by the speed of light squared (E = mc^2).
The binding energy per nucleon is 8.804 MeV. It is calculated by dividing the total binding energy of the nucleus by the number of nucleons in the nucleus. The binding energy per nucleon is a measure of the average amount of energy required to remove a nucleon from the nucleus. It is often used to compare the stability of different nuclei, with higher values indicating greater stability.
Know more about nucleus here:
https://brainly.com/question/23366064
#SPJ11
(t polsi) Let y be the soution of the inihal value problem y′′+y=−sin(2r),y(0)−01,y′(0)=0′,
The solution to the initial value problem y'' + y = -sin(2x), y(0) = 0, y'(0) = 0 is y = sin(2x) - 2x.
What is the solution to the given initial value problem?To solve the initial value problem, we can first find the general solution of the homogeneous equation y'' + y = 0.
Then, we use the method of undetermined coefficients to find a particular solution to the non-homogeneous equation y'' + y = -sin(2x), which is y = sin(2x) - 2x.
By applying the initial conditions y(0) = 0 and y'(0) = 0, we can determine the specific values of the constants A and B, which both turn out to be zero in this case.
Learn more about initial value problem
brainly.com/question/30503609
#SPJ11
A particle is moving with acceleration a(t) = 36t+4. its position at time t = 0 is s(0) = 13 and its velocity at time t = 0 is v(0) 10. What is its position at time t = 15? 1393 =
The position of the particle at time t = 15 can be determined by integrating the acceleration function twice with respect to time and applying the initial conditions. The resulting position function is s(t) = 18t^2 + 2t + 13. Substituting t = 15 into this equation yields a position of 1393 units.
To find the position of the particle at time t = 15, we integrate the acceleration function a(t) = 36t + 4 twice with respect to time to obtain the position function. Integrating the acceleration once gives us the velocity function:
v(t) = ∫(36t + 4) dt = 18t^2 + 4t + C
Using the initial condition v(0) = 10, we can substitute t = 0 and v(0) = 10 into the velocity function to find the value of the constant C:
10 = 18(0)^2 + 4(0) + C
C = 10
So, the velocity function becomes:
v(t) = 18t^2 + 4t + 10
Now, integrating the velocity function gives us the position function:
s(t) = ∫(18t^2 + 4t + 10) dt = 6t^3 + 2t^2 + 10t + D
Using the initial condition s(0) = 13, we substitute t = 0 and s(0) = 13 into the position function to find the value of the constant D:
13 = 6(0)^3 + 2(0)^2 + 10(0) + D
D = 13
Therefore, the position function becomes:
s(t) = 6t^3 + 2t^2 + 10t + 13
To find the position at t = 15, we substitute t = 15 into the position function:
s(15) = 6(15)^3 + 2(15)^2 + 10(15) + 13
s(15) = 1393
Hence, the position of the particle at time t = 15 is 1393 units.
Learn more about function here: brainly.com/question/30721594
#SPJ11
Some students took a biology exam and a physics
exam. Information about their scores is shown in the
cumulative frequency diagram below.
a) Work out an estimate for the median score in
each exam.
The interquartile
range for the scores in the biology
exam is 20.
b) Work out an estimate for the interquartile range
of the scores in the physics exam.
c) Which exam do you think was easier? Give a
reason for your answer.
Cumulative frequency
100
90-
80-
70-
60-
50-
40
30-
20-
10-
0
10 20
30
Exam results
40 50
Score
60
70
80
90 100
-
Key
Biology
Physics
a) An estimate for the median score in each exam are:
Biology exam = 68
Physics exam = 82.
b) An estimate for the interquartile range of the scores in the physics exam is 24.
c) The exam I think was easier is biology exam because there is a positive correlation between biology scores and the cumulative frequency.
What is a median?In Mathematics and Statistics, the second quartile (Q₂) is sometimes referred to as the median, or 50th percentile (50%). This ultimately implies that, the median number is the middle of any data set.
Median, Q₂ = Total frequency/2
Median, Q₂ = 100/2 = 50
By tracing the line from a cumulative frequency of 50, the median exam scores are given by:
Biology exam = 68
Physics exam = 82.
Part b.
Interquartile range (IQR) of a data set = Third quartile(Q₃) - First quartile (Q₁)
Interquartile range (IQR) of physics exam = 94 - 70
Interquartile range (IQR) of physics exam = 24.
Part c.
By critically observing the graph, we can logically deduce that biology exam was easier because there is a positive correlation between biology scores and the cumulative frequency, which means students scored higher in biology.
Read more on median here: https://brainly.com/question/15196540
#SPJ1
Consider the following theorem (called the Quotient-Remainder Theorem): Let n, de Z where d > 0. There exists unique q, r EZ so that n=qd+r, 0≤r
It is also the foundation of many important algorithms, such as Euclidean Algorithm, which is used to find the greatest common divisor of two integers.
The Quotient-Remainder Theorem is a basic and important theorem in the domain of number theory. It is also known as the division algorithm.
To prove the Quotient-Remainder Theorem, we can use the well-ordering principle, which states that every non-empty set of positive integers has a least element.
Suppose that there exists another pair of integers q' and r' such that
[tex]n = q'd + r',[/tex]
where r' is greater than or equal to zero and less than d.
Then, we have: [tex]dq + r = q'd + r' = > d(q - q') = r' - r.[/tex]
Since d is greater than zero, we have |d| is greater than or equal to one. Thus, we can write: |d| is less than or equal to [tex]|r' - r|[/tex] is less than or equal to [tex](d - 1) + (d - 1) = 2d - 2[/tex].
This implies that |d| is less than or equal to 2d - 2,
which is a contradiction. q and r are unique. The Quotient-Remainder Theorem is a powerful tool that has numerous applications in number theory and other fields of mathematics.
To know more about Euclidean Algorithm visit:
https://brainly.com/question/33612430
#SPJ11
WILL GIVE 30 POINTS
Which of the following tables shows the correct steps to transform x2 + 8x + 15 = 0 into the form (x − p)2 = q? [p and q are integers] a x2 + 8x + 15 − 1 = 0 − 1 x2 + 8x + 14 = −1 (x + 4)2 = −1 b x2 + 8x + 15 − 2 = 0 − 2 x2 + 8x + 13 = −2 (x + 4)2 = −2 c x2 + 8x + 15 + 1 = 0 + 1 x2 + 8x + 16 = 1 (x + 4)2 = 1 d x2 + 8x + 15 + 2 = 0 + 2 x2 + 8x + 17 = 2
(x + 4)2 = 2
Answer:
The correct answer (as given in the question) is C
(look into explanation for details)
Step-by-step explanation:
We have,
[tex]x^2+8x+15=0\\simplifying,\\x^2+8x+15+1 = 1\\x^2+8x+16=1\\(x+4)^2=1[/tex]
Find the Fourier series of the periodic function with period 2 defined as follows: . What is the sum of the se- f(x) = 0,
The Fourier series for the periodic function with period 2 defined as f(x) = 0 is given by,f(x) = 0. The sum of the series is also zero since all the coefficients are zero.
Here, the period is 2. Therefore, L = 2.
The coefficient an is given by,an = (2/L) ∫L/2 -L/2 f(x) cos(nπx/L) dxOn substituting the given function f(x), we get
an = (2/2) ∫1/2 -1/2 0 cos(nπx/2) dxan = 0
Hence, the coefficient an is zero for all values of n.The coefficient bn is given by,bn = (2/L) ∫L/2 -L/2 f(x) sin(nπx/L) dx
On substituting the given function f(x), we get
bn = (2/2) ∫1/2 -1/2 0 sin(nπx/2) dxbn = 0
Hence, the coefficient bn is zero for all values of n.
The Fourier series for the given function is,f(x) = a0/2The coefficient a0 is given by,
a0 = (2/L) ∫L/2 -L/2 f(x) dx
On substituting the given function f(x), we geta0 = (2/2) ∫1/2 -1/2 0 dxa0 = 0
Hence, the coefficient a0 is also zero. the Fourier series for the periodic function with period 2 defined as f(x) = 0 is given by,f(x) = 0.The sum of the series is also zero since all the coefficients are zero.
To know more about coefficient visit:
https://brainly.com/question/2490759
#SPJ11
Balance the following reaction and write the reaction using cell notation. Ignore any inert electrodes, as they are never part of the half-reactions. Identify the species oxidized, species reduced, and the oxidizing agent and reducing agent for all the reactions. CIO3(aq) + MnO₂ (s) Cl(aq) + MnO4 (aq) (basic solution)
MnO₂ is oxidized to MnO₄⁻, and CIO₃ is reduced to Cl⁻ in this reaction. The oxidizing agent is CIO₃, and the reducing agent is MnO₂.
To balance the given reaction in basic solution and write it using cell notation, we need to follow these steps:
Step 1: Balance the atoms in the equation except for oxygen and hydrogen.
CIO₃(aq) + MnO₂(s) → Cl⁻(aq) + MnO₄⁻(aq)
Step 2: Balance the oxygen atoms by adding H₂O to the side that needs oxygen.
CIO₃(aq) + MnO₂(s) → Cl⁻(aq) + MnO₄⁻(aq) + H₂O(l)
Step 3: Balance the hydrogen atoms by adding H⁺ ions to the side that needs hydrogen.
CIO₃(aq) + MnO₂(s) + 6H⁺(aq) → Cl⁻(aq) + MnO₄⁻(aq) + H₂O(l)
Step 4: Balance the charge by adding electrons (e⁻) to the appropriate side to make the overall charge balanced.
CIO₃(aq) + MnO₂(s) + 6H⁺(aq) → Cl⁻(aq) + MnO₄⁻(aq) + H₂O(l) + 6e⁻
The balanced equation is now:
CIO₃(aq) + MnO₂(s) + 6H⁺(aq) → Cl⁻(aq) + MnO₄⁻(aq) + H₂O(l) + 6e⁻
Now, let's write the cell notation for the oxidation and reduction half-reactions:
Oxidation Half-Reaction:
MnO₂(s) → MnO₄⁻(aq) + 4H⁺(aq) + 2e⁻
Reduction Half-Reaction:
CIO₃(aq) + 6H⁺(aq) + 5e⁻ → Cl⁻(aq) + 3H₂O(l)
Overall Cell Notation:
MnO₂(s) | MnO₄⁻(aq), H⁺(aq) || CIO₃(aq), Cl⁻(aq) | Pt(s)
In the above cell notation:
- The "|" represents the phase boundary between the solid electrode (MnO₂) and the MnO₄⁻(aq), H⁺(aq) solution.
- The "||" represents the salt bridge or other means of allowing ion flow between the two half-cells.
- The "Pt(s)" represents the platinum electrode, which serves as an inert electrode.
Now, let's identify the species oxidized, species reduced, oxidizing agent, and reducing agent for the reactions:
In the oxidation half-reaction:
- Species oxidized: MnO₂
- Reducing agent: MnO₂
In the reduction half-reaction:
- Species reduced: CIO₃
- Oxidizing agent: CIO₃
Therefore, MnO₂ is oxidized to MnO₄⁻, and CIO₃ is reduced to Cl⁻ in this reaction. The oxidizing agent is CIO₃, and the reducing agent is MnO₂.
Learn more about Half-Reaction:
https://brainly.com/question/26411933
#SPJ11
Find the solution to the system of equations x + y = 1 and x - y = 1.
Answer:
15x
Step-by-step explanation:
add
multiply
divide
multipcation
Answer:
x=1, y=0
Step-by-step explanation:
x+y=1
x-y=1
--------
2x=2, x=1
When it is written out this way, we can easily have a look for ourselves which variable we can easily eliminate. As for this equation, it would be the variable y. When we add the two systems together we would get 2x=2, which makes x=1. When we plug in x as 1 to the first equation, we get 1+y=1, in which y is 0.
1+y=1
y=0
--------------------
x=1, y=0
Corrosion of reinforcing steel in concrete is a world-wide problem with carbonation induced corrosion being one of the main causes of deterioration Describe the carbonation process when steel corrodes including relevant chemistry, reactions
The carbonation process in steel corrosion occurs when carbon dioxide (CO2) from the atmosphere reacts with the alkaline components in concrete, leading to a decrease in pH within the concrete. This reduction in pH disrupts the passivating layer on the reinforcing steel and initiates the corrosion process.
1. Alkaline components in concrete: Concrete is composed of various materials, including cement, aggregates, water, and admixtures. The cementitious binder, usually Portland cement, contains alkaline compounds such as calcium hydroxide (Ca(OH)2).
2. Presence of carbon dioxide: Carbon dioxide is present in the atmosphere, and it can penetrate concrete structures over time. It dissolves in the pore water of the concrete, forming carbonic acid (H2CO3) through the following reaction:
CO2 + H2O -> H2CO3
3. Decrease in pH: Carbonic acid reacts with the alkaline calcium hydroxide in the concrete, resulting in the formation of calcium carbonate (CaCO3) and water:
H2CO3 + Ca(OH)2 -> CaCO3 + 2H2O
As a result, the pH within the concrete decreases from its initial alkaline state (pH around 12-13) to a more neutral or even slightly acidic range (pH around 8-9).
4. Disruption of the passivating layer: The passivating layer on the reinforcing steel, typically composed of a thin oxide film (primarily iron oxide), helps protect the steel from corrosion. However, the decrease in pH caused by carbonation can disrupt this protective layer, making the steel susceptible to corrosion.
5. Initiation of corrosion: Once the passivating layer is compromised, an electrochemical corrosion process is initiated. The steel begins to oxidize, forming iron(II) ions (Fe2+) in an anodic reaction:
Fe -> Fe2+ + 2e-
At the same time, oxygen and water react at the cathodic sites, consuming electrons and forming hydroxide ions:
O2 + 2H2O + 4e- -> 4OH-
The hydroxide ions migrate towards the anodic sites, where they combine with the iron(II) ions to form iron(II) hydroxide (Fe(OH)2). This compound can further react with oxygen and water, leading to the formation of iron(III) oxide (Fe2O3) and more hydroxide ions.
The carbonation process in steel corrosion involves the reaction of carbon dioxide from the atmosphere with the alkaline components in concrete, resulting in a decrease in pH. This decrease disrupts the passivating layer on the reinforcing steel and initiates the corrosion process. Understanding the chemistry and reactions involved in carbonation-induced corrosion is crucial for developing effective strategies to mitigate and prevent the deterioration of concrete structures caused by this process.
Learn more about carbonation process visit:
https://brainly.com/question/8587092
#SPJ11
A couple with a low standard potential has a thermodynamic tendency to reduce a couple with a high standard potential. Select one: O True O False Chose the correct answer. For the electrochemical cell producing a lot of gas the increase in temperature Select one: O a. leaves the standard cell potential unchanged. O b. decreases the standard cell potential. O c. increases the standard cell potential. Select the best answer to complete the sentence). The temperature dependence of the cell potential can be use to calculate Select one: O a.standard gibbs energy. b. standard enthalpy. O c. standard gibbs energy, enthalpy and entropy. Od standard entropy.
The couple with a low standard potential does not have a thermodynamic tendency to reduce a couple with a high standard potential. Hence, the given statement is false.
Explanation:
Thermodynamics defines the energy exchange during a reaction and the final state after the reaction. It also explains the relationship between the initial state and the final state. Standard cell potential represents the cell's tendency to discharge and the ability to supply electrical energy. The amount of standard potential is the amount of energy that can be generated per mole of electrons transferred during the process.
The couple with a high standard potential will oxidize the couple with a low standard potential instead of reducing it. The statement “a couple with a low standard potential has a thermodynamic tendency to reduce a couple with a high standard potential” is incorrect.
The increase in temperature decreases the standard cell potential for an electrochemical cell producing a lot of gas. The option "b.
decreases the standard cell potential" is correct to complete the sentence.
The temperature dependence of the cell potential can be used to calculate the standard Gibbs energy, enthalpy, and entropy.
Therefore, the correct answer to complete the sentence is "c. standard Gibbs energy, enthalpy, and entropy."
To know more about Thermodynamics visit:
https://brainly.com/question/14265296
#SPJ11
Is estimating an art or a science? (Select all that apply.) a. it is an art b. it is neither art nor science c. it is a science
Estimating can be considered both an art and a science. It requires a combination of subjective judgment and objective analysis to arrive at accurate and reliable estimates.
Estimating is an art because it involves a certain level of creativity and intuition. Estimators often rely on their experience, expertise, and judgment to assess the various factors that can impact a project's cost, time, and resources. They need to consider subjective elements such as project complexity, stakeholder expectations, and potential risks. Estimating requires the ability to interpret incomplete or ambiguous information and make educated assumptions based on past knowledge and insights. Therefore, there is an artistic aspect to estimating that involves creativity and problem-solving.
On the other hand, estimating is also a science because it relies on systematic methodologies and data-driven analysis. Estimators use mathematical models, statistical techniques, and historical data to quantify and measure project parameters. They apply standardized processes and formulas to calculate costs, durations, and resource requirements. Estimating involves objective measurements, data analysis, and rigorous methodologies to ensure accuracy and consistency. It requires a scientific approach to collect, analyze, and interpret relevant information, using tools and techniques that have been developed through research and empirical evidence.
In summary, estimating combines elements of both art and science. It involves subjective judgment, creativity, and intuition (art) while also relying on objective analysis, systematic methodologies, and data-driven approaches (science). Estimators need to balance their artistic skills with scientific rigour to provide reliable and informed estimates for various projects.
To learn more about Estimating refer:
https://brainly.com/question/28416295
#SPJ11
Determine the maximum allowable overall gross weight of the WB-67 design vehicle. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. Need Help
WB-67 design vehicle, the maximum allowable overall gross weight is 91000lb.
L=73.5
n=4
w= 500(LN/N-1 + 12N+ 36)
using n=4 and l=73.5
W= 91000lb
The maximum allowable overall gross weight of a vehicle is determined by various factors, including the vehicle's design, structural strength, suspension capacity, braking system, and legal regulations. Without knowing the specific details and specifications of the WB-67 design vehicle, such as its dimensions, construction materials, intended use, and any applicable regulations, it is not possible to provide an accurate answer.
To determine the maximum allowable overall gross weight of the WB-67 design vehicle, it is necessary to consult the vehicle's design documentation, engineering specifications, and relevant regulatory guidelines.
Learn more about dimension:
https://brainly.com/question/26740257
#SPJ11
I need a step by step explanation please Thank you so much
======================================================
Work shown for part (a)
tan(x) = tan(x-180)
tan(265) = tan(265-180)
tan(265) = tan(85)
-------------------------
Work shown for part (b)
sine = opposite/hypotenuse = 2/3
opposite = 2 and hypotenuse = 3
Use a = 2 and c = 3 to determine b in the pythagorean theorem.
[tex]a^2+b^2 = c^2\\\\2^2+b^2 = 3^2\\\\4+b^2 = 9\\\\b^2 = 9-4\\\\b^2 = 5\\\\b = \sqrt{5}\\\\[/tex]
adjacent = [tex]\sqrt{5}[/tex] and opposite = 2
[tex]\cot(\theta) = \frac{\text{adjacent}}{\text{opposite}}\\\\\cot(\theta) = \frac{\sqrt{5}}{2}\\\\[/tex]
-------------------------
Work shown for part (c)
[tex]\frac{5}{2}\cos(\theta)+4 = 2\\\\\frac{5}{2}\cos(\theta) = 2-4\\\\\frac{5}{2}\cos(\theta) = -2\\\\\cos(\theta) = -2*(\frac{2}{5})\\\\\cos(\theta) = -\frac{4}{5}\\\\[/tex]
[tex]\theta = \pm\arccos\left(-\frac{4}{5}\right)+360n \ \ \text{ .... where n is an integer} \\\\\theta = \pm143.1301+360n\\\\\theta = 143.1301+360n \ \text{ or } \ \theta = -143.1301+360n\\\\[/tex]
Here's a table of values for selected inputs of n
[tex]\begin{array}{|c|c|c|} \cline{1-3}n & 143.1301+360n & -143.1301+360n\\\cline{1-3}-1 & -216.8699 & -503.1301\\\cline{1-3}0 & 143.1301 & -143.1301\\\cline{1-3}1 & 503.1301 & 216.8699\\\cline{1-3}2 & 863.1301 & 576.8699\\\cline{1-3}\end{array}[/tex]
The results 143.1301 and 216.8699 are in the interval [tex]0^{\circ} < \theta < 360^{\circ}[/tex], which makes them the two approximate solutions.
You can use graphing software such as GeoGebra or Desmos to confirm the answers.
The crystalline density of polypropylene is 0.946 g/cm3, and its amorphous density is 0.855 g/cm3. What is the weight percent of the structure thatis crystalline in a polypropylene thathas a density of 0.904 g/cm3? Round your answer to three significant figures. Weight percent crystallinity = 56.3 56.3 g/cm3 56.3 cm3 56.3%
The weight percent of the structure that is crystalline in a polypropylene that has a density of 0.904 g/cm³ is 53.8%.
Polypropylene is a semi-crystalline thermoplastic material with a specific gravity of 0.946 g/cm³ when crystalline and 0.855 g/cm³ when amorphous.
The weight percent of the structure that is crystalline in a polypropylene that has a density of 0.904 g/cm³ is 56.3%.
Therefore, the given density of polypropylene lies in between the crystalline and amorphous densities. So, to calculate the weight percent of the structure that is crystalline in a polypropylene that has a density of 0.904 g/cm³, we use the formula below:
Weight percent crystallinity = [(density of the sample - amorphous density)/(crystalline density - amorphous density)] × 100Substituting the given values in the formula above, we get:
Weight percent crystallinity = [(0.904 g/cm³ - 0.855 g/cm³)/(0.946 g/cm³ - 0.855 g/cm³)] × 100
= (0.049 g/cm³/0.091 g/cm³) × 100
= 0.538 × 100
= 53.8%
Therefore, the weight percent of the structure that is crystalline in a polypropylene that has a density of 0.904 g/cm³ is 53.8%.'
Thus, the answer is 53.8%.
Learn more about weight percent
https://brainly.com/question/28136666
#SPJ11
Determine the fugacity coefficient of Nitrogen gas in a Nitrogen/Methane gas mixture at 27 bar and 238 Kif the gas mixture is 29 percent in Nitrogen. Experimental virial coefficient data are as follows:
B11-35.2 822-105.0 812-59.8 cm3/mol
Round your answer to 2 decimal places.
The fugacity coefficient of Nitrogen gas in the Nitrogen/Methane gas at 27 bar and 238 K, if the gas mixture is 29 percent in Nitrogen is approximately 26.63.
To determine the fugacity coefficient of Nitrogen gas in a Nitrogen/Methane gas mixture, we can use the virial equation:
[tex]Z = 1 + B1(T)/V1 + B2(T)/V2[/tex]
where Z is the compressibility factor, B1 and B2 are the virial coefficients, T is the temperature, and V1 and V2 are the molar volumes of the components.
Given the experimental virial coefficient data:
B1 = -35.2 cm3/mol
B2 = -105.0 cm3/mol
The mole fraction of Nitrogen in the mixture is 0.29, and the mole fraction of Methane can be calculated as (1 - 0.29) = 0.71.
Now, we need to convert the given virial coefficients to molar units (cm3/mol to m3/mol) by dividing them by 10^6.
[tex]B1 = -35.2 * 10^(-6) m3/mol[/tex]
[tex]B2 = -105.0 * 10^(-6) m3/mol[/tex]
Substituting the values into the virial equation:
[tex]Z = 1 + (-35.2 * 10^(-6) * 238 K)/(0.29) + (-105.0 * 10^(-6) * 238 K)/(0.71)[/tex]
Simplifying the equation:
[tex]Z = 1 - 0.00251 + 0.00334[/tex]
[tex]Z = 1.00083[/tex]
The fugacity coefficient (ϕ) is related to the compressibility factor (Z) by the equation:
ϕ = Z * P/Po
where P is the pressure of the gas mixture and Po is the reference pressure (standard pressure, usually 1 atm).
Given that the pressure of the gas mixture is 27 bar, we need to convert it to atm:
[tex]P = 27 bar * 0.98692 atm/bar ≈ 26.62 atm[/tex]
Substituting the values into the fugacity coefficient equation:
ϕ = 1.00083 * 26.62 atm/1 atm
ϕ ≈ 26.63
Therefore, the fugacity coefficient of Nitrogen gas in the Nitrogen/Methane gas mixture is approximately 26.63.
learn more about fugacity coefficient
https://brainly.com/question/13253563
#SPJ11
The function s(t) describes the position of a particle moving along a coordinate line, where s is in feet and t is in seconds. What is the particle's speed after one second? (Round answer to three decimal places, please.)
s(t) = (t²+8) e^t/3
The particle's speed after one second, rounded to three decimal places, is approximately 15.345 feet per second.
To find the particle's speed after one second, we need to differentiate the position function, s(t), with respect to time, t, and then evaluate it at t = 1.
Given: s(t) = (t²+8) e^t/3
To differentiate this function, we can use the product rule and the chain rule. Let's calculate it step by step:
Step 1: Apply the product rule to (t²+8) and e^t/3.
d/dt [(t²+8) e^t/3] = (t²+8) * d/dt [e^t/3] + e^t/3 * d/dt [t²+8]
Step 2: Differentiate e^t/3 using the chain rule.
d/dt [e^t/3] = (1/3) * e^t/3 * d/dt [t]
Step 3: Differentiate t²+8 with respect to t.
d/dt [t²+8] = 2t
Step 4: Substitute the derivatives back into the expression.
d/dt [(t²+8) e^t/3] = (t²+8) * (1/3) * e^t/3 + e^t/3 * 2t
Step 5: Simplify the expression.
d/dt [(t²+8) e^t/3] = (t²+8) * e^t/3 + 2t * e^t/3
Step 6: Evaluate the derivative at t = 1.
d/dt [(t²+8) e^t/3] evaluated at t = 1:
= (1²+8) * e^1/3 + 2(1) * e^1/3
= (9) * e^1/3 + 2 * e^1/3
= 9e^1/3 + 2e^1/3
The particle's speed after one second is given by the magnitude of the derivative:
Speed = |d/dt [(t²+8) e^t/3] evaluated at t = 1|
= |9e^1/3 + 2e^1/3|
Now, let's calculate the numerical value of the speed rounded to three decimal places:
Speed ≈ |9e^1/3 + 2e^1/3| ≈ |9(1.395) + 2(1.395)| ≈ |12.555 + 2.790| ≈ |15.345| ≈ 15.345
The particle's speed after one second is therefore 15.345 feet per second, rounded to three decimal places.
Learn more about function
https://brainly.com/question/30721594
#SPJ11
The differential equation
y+2y^4=(y^5+3x)y'
can be written in differential form:
M(x, y) dx + N(x, y) dy = 0
where
M(x, y) =__and N(x, y) =__
The term M(x, y) dx + N(x, y) dy becomes an exact differential if the left hand side above is divided by y4. Integrating that new equation, the solution of the differential equation is =___C.
The solution to the given differential equation is:
x/y^3 + 2x + (1/2)y^2 = C.
The given differential equation is y + 2y^4 = (y^5 + 3x)y'.
To write this equation in differential form, we need to determine the functions M(x, y) and N(x, y).
To do this, we divide both sides of the equation by y^4:
y/y^4 + 2y^4/y^4 = (y^5 + 3x)y'/y^4
Simplifying, we get:
1/y^3 + 2 = (y + 3x/y^4)y'
Now, we can identify M(x, y) and N(x, y):
M(x, y) = 1/y^3 + 2
N(x, y) = y + 3x/y^4
The term M(x, y) dx + N(x, y) dy becomes an exact differential if the partial derivative of M(x, y) with respect to y is equal to the partial derivative of N(x, y) with respect to x.
Taking the partial derivative of M(x, y) with respect to y:
∂M/∂y = -3/y^4
Taking the partial derivative of N(x, y) with respect to x:
∂N/∂x = 3/y^4
Since ∂M/∂y is equal to ∂N/∂x, the equation becomes an exact differential.
Now, we can integrate the equation. Integrating M(x, y) with respect to x gives us the potential function, also known as the integrating factor.
Integrating 1/y^3 + 2 with respect to x:
∫(1/y^3 + 2) dx = x/y^3 + 2x + g(y)
The constant of integration g(y) is a function of y since we are integrating with respect to x.
Now, we differentiate the potential function with respect to y to find N(x, y):
d/dy (x/y^3 + 2x + g(y)) = -3x/y^4 + g'(y)
Comparing this to N(x, y), we see that -3x/y^4 + g'(y) = y + 3x/y^4.
This implies that g'(y) = y, so g(y) = (1/2)y^2.
Substituting g(y) back into the potential function, we have:
x/y^3 + 2x + (1/2)y^2 = C
where C is the constant of integration.
Therefore, the solution to the given differential equation is:
x/y^3 + 2x + (1/2)y^2 = C.
Learn more about differential equation :
https://brainly.com/question/18760518
#SPJ11
Select the correct answer. In graph A, y intercept is at 0, x intercepts are at 1 and 4. Graph B, y intercept is at 0 and x intercepts are at -1, 4. Graph C is a parabola with y intercept at -4 and x intercepts at -1 and 4. Graph D, y intercept at 0, x intercepts at -2, 3. Which is the graph of the function f(x) = x3 − 3x2 − 4x? A. graph A B. graph B C. graph C D. graph D
The correct answer is: Graph C is the graph of the function f(x) = x^3 - 3x^2 - 4x.
To determine the graph of the function f(x) = x^3 - 3x^2 - 4x, we can analyze the given information about the y-intercept and x-intercepts.
The y-intercept of the function is the point where it intersects the y-axis. From the provided information, we can see that the y-intercept is at 0 in all four graphs (A, B, C, and D).
The x-intercepts of the function are the points where it intersects the x-axis. From the given information, we can see the following x-intercepts for each graph:
Graph A: x-intercepts at 1 and 4
Graph B: x-intercepts at -1 and 4
Graph C: x-intercepts at -1 and 4
Graph D: x-intercepts at -2 and 3
Comparing the x-intercepts of the graphs with the given x-intercepts for the function f(x) = x^3 - 3x^2 - 4x, we can see that Graph C matches the x-intercepts of -1 and 4.
For such more question on function:
https://brainly.com/question/11624077
#SPJ8
Consider the vector field F = (7x + 3y, 5x + 7y) Is this vector field Conservative? Select an answer If so: Find a function f so that F f(x,y) = Use your answer to evaluate Question Help: Video = V f + K efi F. dr along the curve C: r(t) = t²i+t³j, 0≤ t ≤ 2
The vector field F = (7x + 3y, 5x + 7y) is conservative, and we can find a function f(x, y) = 3x² + 5xy + 3y² that satisfies F = ∇f. By evaluating the line integral ∫C F · dr along the curve C: r(t) = t²i + t³j, 0 ≤ t ≤ 2, using the fundamental theorem of line integrals, we can simplify the calculation by evaluating f at the endpoints of the curve and subtracting the values. The result of the line integral is f(2², 2³) - f(0², 0³).
To determine if the vector field F is conservative, we need to check if it is the gradient of a scalar function f(x, y). Computing the partial derivatives of f, we find ∂f/∂x = 7x + 3y and ∂f/∂y = 5x + 7y. Comparing these with the components of F, we see that they match. Therefore, we have a scalar function f(x, y) = 3x² + 5xy + 3y² that satisfies F = ∇f.
Using the fundamental theorem of line integrals, we can evaluate the line integral ∫C F · dr by finding the difference between the values of f at the endpoints of the curve C. The curve C is parameterized as r(t) = t²i + t³j, where 0 ≤ t ≤ 2. Evaluating f at the endpoints, we have f(2², 2³) - f(0², 0³).
Substituting the values, we get f(4, 8) - f(0, 0) = (3(4)² + 5(4)(8) + 3(8)²) - (3(0)² + 5(0)(0) + 3(0)²) = 228 - 0 = 228.
Therefore, the value of the line integral ∫C F · dr along the curve C is 228.
Learn more about vector here : brainly.com/question/24256726
#SPJ11
The vector field F = (7x + 3y, 5x + 7y) is conservative, and we can find a function f(x, y) = 3x² + 5xy + 3y² that satisfies F = ∇f. The value of the line integral ∫C F · dr along the curve C is 228.
By evaluating the line integral ∫C F · dr along the curve C: r(t) = t²i + t³j, 0 ≤ t ≤ 2, using the fundamental theorem of line integrals, we can simplify the calculation by evaluating f at the endpoints of the curve and subtracting the values. The result of the line integral is f(2², 2³) - f(0², 0³).
To determine if the vector field F is conservative, we need to check if it is the gradient of a scalar function f(x, y). Computing the partial derivatives of f, we find ∂f/∂x = 7x + 3y and ∂f/∂y = 5x + 7y. Comparing these with the components of F, we see that they match. Therefore, we have a scalar function f(x, y) = 3x² + 5xy + 3y² that satisfies F = ∇f.
Using the fundamental theorem of line integrals, we can evaluate the line integral ∫C F · dr by finding the difference between the values of f at the endpoints of the curve C. The curve C is parameterized as r(t) = t²i + t³j, where 0 ≤ t ≤ 2. Evaluating f at the endpoints, we have f(2², 2³) - f(0², 0³).
Substituting the values, we get f(4, 8) - f(0, 0) = (3(4)² + 5(4)(8) + 3(8)²) - (3(0)² + 5(0)(0) + 3(0)²) = 228 - 0 = 228.
Therefore, the value of the line integral ∫C F · dr along the curve C is 228.
Learn more about vector here : brainly.com/question/24256726
#SPJ11
PLEASE HELP WITH THIS ASAP!
1. Given the data listed above, the line of best fit would be y = 1.64x + 51.9.
How to determine the line of best fit?In this exercise, we would plot the shoe size on the x-axis of a scatter plot while height would be plotted on the y-axis of the scatter plot through the use of Microsoft Excel.
On the Microsoft Excel worksheet, you should right click on any data point on the scatter plot, select format trend line, and then tick the box to display a linear equation for the line of best fit on the scatter plot.
Based on the scatter plot shown below, which models the relationship between x and y, an equation for the line of best fit is modeled as follows:
y = 1.64x + 51.9
Read more on scatter plot here: brainly.com/question/28605735
#SPJ1
A compression member designed in ASD will always pass the LRFD requirements.
TRUE
FALSE
The given statement is false "A compression member designed in ASD will pass the LRFD requirements.
ASD (Allowable Stress Design) and LRFD (Load and Resistance Factor Design) are two distinct approaches for designing structural members. ASD relies on allowable stress, obtained by dividing the maximum stress the material can handle by a safety factor. The applied loads are compared to these allowable stresses to ensure the member stays within safe limits.
On the other hand, LRFD is a more advanced design method that accounts for uncertainties in material strengths, loads, and other factors. It involves multiplying the applied loads by load factors and dividing the member's resistance by resistance factors. A design is considered safe if the load effects are lower than the resistance.
Due to different safety factors and approaches, a compression member designed using ASD may not necessarily meet the requirements of LRFD. The choice of design method should be based on the specific project requirements and code provisions.
In summary, a compression member designed using ASD will not always satisfy the LRFD requirements since these methods employ different approaches and safety factors.
To learn more about compression
https://brainly.com/question/7602497
#SPJ11
Video: Compound Interest Annually Video: How to round Decimals? Shahin invests $3,205 in an account that offers 4.14% interest, compounded annually. How much money is in Shahin's account after 13 years?
We have proven that Q+ is isomorphic to a proper subgroup of itself, which is H.
To prove that the group Q+ (the positive rational numbers under multiplication) is isomorphic to a proper subgroup of itself, we need to find a subgroup of Q+ that is isomorphic to Q+ but is not equal to Q+.
Let's consider the subgroup H of Q+ defined as follows:
H = {2^n | n is an integer}
In other words, H is the set of all positive rational numbers that can be expressed as powers of 2.
Now, let's define a function f: Q+ -> H as follows:
f(x) = 2^(log2(x))
where log2(x) represents the logarithm of x to the base 2.
We can verify that f is a well-defined function that maps elements from Q+ to H. It is also a homomorphism, meaning it preserves the group operation.
To prove that f is an isomorphism, we need to show that it is injective (one-to-one) and surjective (onto).
1. Injectivity: Suppose f(x) = f(y) for some x, y ∈ Q+. We need to show that x = y.
Let's assume f(x) = f(y). Then, we have 2^(log2(x)) = 2^(log2(y)).
Taking the logarithm to the base 2 on both sides, we get log2(x) = log2(y).
Since logarithm functions are injective, we conclude that x = y. Therefore, f is injective.
2. Surjectivity: For any h ∈ H, we need to show that there exists x ∈ Q+ such that f(x) = h.
Let h ∈ H. Since H consists of all positive rational numbers that can be expressed as powers of 2, there exists an integer n such that h = 2^n.
We can choose x = 2^(n/log2(x)). Then, f(x) = 2^(log2(x)) = 2^(n/log2(x)) = h.
Therefore, f is surjective.
Since f is both injective and surjective, it is an isomorphism between Q+ and H. Furthermore, H is a proper subgroup of Q+ since it does not contain all positive rational numbers (only powers of 2).
Hence, we have proven that Q+ is isomorphic to a proper subgroup of itself, which is H.
To know more about number click-
http://brainly.com/question/24644930
#SPJ11
Problem 5.7. Consider the two-point boundary value problem -u"=0, 0 < x < 1; u'(0) = 5, u(1) = 0. (5.6.7) Let Th j jh, j = 0, 1,..., N, h = 1/N be a uniform partition of the interval 0
The solution to the two-point boundary value problem -u" = 0, 0 < x < 1, with u'(0) = 5 and u(1) = 0, is u(x) = 5x - 5.
To solve this problem, we can use a uniform partition of the interval 0 < x < 1. Let Th denote the partition, with jh being the j-th point on the partition. Here, h = 1/N, where N is the number of intervals.
To find the solution, we need to follow these steps:
1. Define the interval: The given problem has the interval 0 < x < 1.
2. Set up the uniform partition: Divide the interval into N equal subintervals, each of length h = 1/N. The j-th point on the partition is given by jh, where j ranges from 0 to N.
3. Express the equation: The equation -u" = 0 represents a second-order linear homogeneous differential equation. It means the second derivative of u with respect to x is equal to zero.
4. Solve the differential equation: Since the equation is -u" = 0, integrating it twice gives us u(x) = Ax + B, where A and B are constants of integration.
5. Apply the boundary conditions: Use the given boundary conditions to find the values of A and B. We have u'(0) = 5 and u(1) = 0.
a. For u'(0) = 5, we differentiate the expression u(x) = Ax + B with respect to x and substitute x = 0. This gives us A = 5.
b. For u(1) = 0, we substitute x = 1 into the expression u(x) = 5x + B. This gives us 5 + B = 0, which implies B = -5.
6. Write the final solution: Substitute the values of A and B into the expression u(x) = Ax + B. The final solution to the two-point boundary value problem -u" = 0, with u'(0) = 5 and u(1) = 0, is u(x) = 5x - 5.
To learn more about differential equation visit : https://brainly.com/question/1164377
#SPJ11
Which system would be closer to a PFR than a CMFR? a.Water pipe b.Room c. Lake d. Mug
Lake is closer to a PFR than a CMFR. In a lake, the water flows in one direction due to a gradient in temperature or salinity, which creates a layered effect.
The system that would be closer to a PFR (plug flow reactor) than a CMFR (continuous mixed flow reactor) is lake. In a plug flow reactor (PFR), the fluid flow is highly organized, moving through the reactor as a plug of fluid. There is a minimal mixing or back-mixing of the fluid within the reactor, and there is a steady-state flow from the entrance to the exit.
In contrast, a continuous mixed flow reactor (CMFR) has a continuous flow of reactants in and products out with the reactor contents are thoroughly mixed. The CMFR has uniform concentration of the reactants and products throughout the reactor and there is no concentration gradient.
It is much like a stirred tank with a continuous flow in and out.
In conclusion, lake is closer to a PFR than a CMFR. In a lake, the water flows in one direction due to a gradient in temperature or salinity, which creates a layered effect.
The water at the bottom of the lake is denser and colder than the water at the top, causing it to sink and creating a stratified environment. The stratification prevents the water from mixing and creating a homogenous mixture, making the lake a closer system to a PFR than a CMFR.
To know more about temperature, visit:
https://brainly.com/question/7510619
#SPJ11
Find the Jacobian a(x, y, z) a(u, v, w) for the indicated change of variables. If x = f(u, v, w), y = g(u, v, w), and z=h(u, v, w), then the Jacobian of x, y, and z with respect to u, v, and w is a(x, y, z) a(u, v, w) 11 x=u-v+w, || a(x, y, z) = a(u, v, w) ax ax ax au av aw ay ay ay au av aw az az az au av aw y = 2uv, z = u + v + w
J = [ 1 -1 1 ]
[ 2v 2u 0 ]
[ 1 1 1 ]
To find the Jacobian of the transformation from variables (x, y, z) to variables (u, v, w), we need to compute the partial derivatives of each new variable with respect to the original variables.
Given the transformations:
x = u - v + w
y = 2uv
z = u + v + w
We will calculate the Jacobian matrix of these transformations.
The Jacobian matrix is given by:
J = [ ∂(x, y, z)/∂(u, v, w) ]
To find the elements of this matrix, we calculate the partial derivatives:
∂x/∂u = 1
∂x/∂v = -1
∂x/∂w = 1
∂y/∂u = 2v
∂y/∂v = 2u
∂y/∂w = 0
∂z/∂u = 1
∂z/∂v = 1
∂z/∂w = 1
Putting these partial derivatives into the Jacobian matrix, we have:
J = [ 1 -1 1 ]
[ 2v 2u 0 ]
[ 1 1 1 ]
So, the Jacobian matrix for the transformation is:
J = [ 1 -1 1 ]
[ 2v 2u 0 ]
[ 1 1 1 ]
learn more about Jacobian
brainly.com/question/32065341
#SPJ11
[50 pts] Two solid cylindrical rods AB and BC are welded together at B and loaded as shown. Knowing that P= 10 kips, find the average normal stress at the midsection of (a) rod AB, (b) rod BC. 30 in. -1.25 in. 12 kips 25 in. -0.75 in
The average normal stress at the midsection of rod AB is approximately 6.37 kips/in², and the average normal stress at the midsection of rod BC is approximately 22.43 kips/in².
To find the average normal stress at the midsection of rods AB and BC, we can use the formula for average normal stress:
Average normal stress = Force / Area
(a) Average normal stress at the midsection of rod AB:
Force P = 10 kips
Length of rod AB = 30 in.
Radius of rod AB = 1.25 in.
To calculate the average normal stress, we need to find the area of rod AB. The cross-sectional area of a cylindrical rod can be calculated using the formula:
Area = π * radius^2
Area of rod AB = π * (1.25 in)^2
Now, we can calculate the average normal stress:
Average normal stress at the midsection of rod AB = Force / Area
Average normal stress at the midsection of rod AB = 10 kips / (π * (1.25 in)^2)
(b) Average normal stress at the midsection of rod BC:
Force P = 12 kips
Length of rod BC = 25 in.
Radius of rod BC = 0.75 in.
Similar to rod AB, we need to find the area of rod BC:
Area of rod BC = π * (0.75 in)^2
Now, we can calculate the average normal stress:
Average normal stress at the midsection of rod BC = Force / Area
Average normal stress at the midsection of rod BC = 12 kips / (π * (0.75 in)^2)
Now, let's calculate the values:
(a) Average normal stress at the midsection of rod AB:
Average normal stress at the midsection of rod AB ≈ 10 kips / (3.14 * (1.25 in)^2) ≈ 6.37 kips/in²
(b) Average normal stress at the midsection of rod BC:
Average normal stress at the midsection of rod BC ≈ 12 kips / (3.14 * (0.75 in)^2) ≈ 22.43 kips/in²
Learn more about Stress:
https://brainly.com/question/2948847
#SPJ11
Let X = [0,3] and let~ be the equivalence relation on X where we declare ~ y if x and y are both in (1,2). Let X* be the quotient space obtained from ~ (you can think of X* as taking X and identifying all of (1, 2) into a single point). Prove that X* is not Hausdorff.
It is not possible to find two disjoint open sets in X* containing the points 0 and 3.We can say that X* is not Hausdorff.
X = [0, 3] and the equivalence relation ~ on X, where ~ y if x and y are both in (1, 2).Let X* be the quotient space obtained from ~ (you can think of X* as taking X and identifying all of (1, 2) into a single point).Now we are supposed to prove that X* is not Hausdorff.
Hausdorff is defined as:For any two distinct points a, b ∈ X, there exists open sets U, V ⊆ X such that a ∈ U, b ∈ V, and U ∩ V = ∅.
Now we will take two distinct points in X*, and we will show that it is not possible to find two disjoint open sets containing each point.
Let's take a = 0 and b = 3. Now in X*, the two points 0 and 3 are the images of the closed sets [0, 1) and (2, 3] respectively. These closed sets are separated by the open set (1, 2) which was collapsed to a point in X*.
To know more about equivalence relation visit:
https://brainly.com/question/14307463
#SPJ11