the wavelength of an electromagnetic wave is measured to be 600 m.(a)what is the frequency of the wave?(b)what type of em wave is it?

Rotational inertia is similar to inertia in that both deal with an object's resistance to changes in motion. Torque affects rotation by causing a change in an object's rotational motion. Lever arm refers to the distance between the axis of rotation and the point where a force is applied to an object.

Inertia is the tendency of an object to remain at rest or in uniform motion unless acted upon by an external force. Similarly, rotational inertia is an object's resistance to changes in its rotational motion. Both types of inertia depend on the mass of the object and the distribution of that mass relative to the axis of rotation.

Torque is defined as the force applied to an object multiplied by the distance from the axis of rotation. The greater the torque applied to an object, the greater the change in its rotational motion.

For example, if a wrench is used to apply a torque to a bolt, the bolt will either start to rotate or its rotational speed will increase.

In general, torque causes an object to experience an angular acceleration in the direction of the torque.

The lever arm determines the amount of torque that can be applied to an object. The longer the lever arm, the greater the torque that can be applied to an object.

Similarly, the shorter the lever arm, the smaller the torque that can be applied to an object.

In general, the lever arm is an important factor in determining how much torque can be applied to an object.

For more such questions on Rotational inertia, click on:

https://brainly.com/question/14001220

#SPJ11

Gradual shift of North Magnetic Pole's position on Earth, steady rise in planet's average temperature and reduction in the Moon's light reflection.

Using climate models, Dr. Washington and his team were able to simulate the effects of physics on a number of weather-related factors, such as "how heat energy, water vapor, and chemicals travel between Earth's seas and the atmosphere." Following that, computers used data from climate models to predict changes in the atmosphere.

These models were utilised to back the 2007 Intergovernmental Panel on Climate Change (IPCC) report's findings that human behaviour directly affects the environment.

Dr. Washington and his group received the 2007 Nobel Peace Prize3 as a result.

To know more about Warren Washington, refer

https://brainly.com/question/19930662

#SPJ1

Note: The question given on the portal is incomplete. here is the complete question.

Question: The work of Warren Washington would be most likely to explain which of the following phenomena

Gradual shift of North Magnetic Pole's position on Earth

Steady rise in planet's average temperature

Reduction in the Moon's light reflection.

Increase in Moon light's reflection.

From the calculations done, it is observed that the father hears the home run first.

Radio waves are the electromagnetic waves. The velocity of these waves is given by,

c = d/t

where,

c is speed

d is distance

t is time

Time taken by the girl to hear the home run is given by the formula,

t₁ = d₁/vs

where,

vs is the velocity of sound

t₁ = 115/343 = 0.34 s

Time taken by the father to hear the home run is given as,

t₂ = d₂/c = (132 × 10³)/(3×10⁸) = 4.4 × 10⁻⁴ s

As t₁ > t₂, the father hears the home run first.

To know more about time:

https://brainly.com/question/13370537

#SPJ4

The magnitude of the electric field between the plates is E = V0 / d.

A capacitor is constructed of two identical conducting plates parallel to each other and separated by a distance d. The capacitor is charged to a potential difference of V0 by a battery, which is then disconnected. If any edge effects are negligible, the magnitude of the electric field between the plates is given by:

E = V0/d,

where E is the electric field, V0 is the potential difference, and d is the distance between the plates.

Therefore, the magnitude of the electric field between the plates is V0/d.

The magnitude of the electric field between the plates of a capacitor can be calculated using the formula:
Electric Field (E) = Voltage (V) / Distance (d)
Given in the student question:
Voltage (V) = V0
Distance (d) = d
So, the magnitude of the electric field between the plates is E = V0 / d

For more such questions on electric field , Visit:

https://brainly.com/question/14372859

#SPJ11

When the skateboarder is on the top of the curve, the normal force exerted by the track on the top will be equal to the gravitational force acting on the skateboarder.

This is because the skateboarder is in equilibrium at the top of the curve, meaning the forces acting on them are balanced. The normal force is the force exerted by the surface perpendicular to the surface, in this case, the track.

The gravitational force is the force of attraction between two objects with mass, in this case, the skateboarder and the Earth.

Therefore, the normal force on the skateboarder at the top of the curve is equal to their weight.

For more such questions on force, click on:

https://brainly.com/question/12785175

#SPJ11

It will take 7.50 seconds to  cross a railway platform 165m long, when a train is moving at a speed of 132kmph. if the length of the train is 110 meters.

At the point when a train crosses a stage, the all out distance it covers is the amount of the length of the train and the length of the stage. The time it takes to cover this distance relies upon the speed of the train, which is given in km/h. We can change this over completely to m/s by duplicating by 1000/3600.

For this situation, the speed of the train is 132 km/h, which is around 36.67 m/s. The complete distance the train should cover is the length of the train in addition to the length of the stage, which is 110 m + 165 m = 275 m.

To ascertain the time it takes to cover this distance, we can utilize the equation: time = distance/speed. Subbing the given qualities, we get:

time = 275 m/36.67 m/s

≈ 7.50 s

Accordingly, it will require around 7.50 seconds for the train to cross the 165 m long stage, accepting that there is no postponement because of some other factors like speed increase or deceleration.

To learn more about speed and time, refer:

https://brainly.com/question/17153206

#SPJ4

The driving frequency that would cause resonance in this mass-spring system is approximately 7.96 Hz.

Resonance occurs when the driving frequency of an external force matches the natural frequency of a system. In the case of a mass-spring system, the natural frequency is determined by the spring constant and the mass of the object attached to the spring.

The formula for the natural frequency of a mass-spring system is:

[tex]f = \frac{1}{2\pi} * \sqrt{(\frac{k}{m} )}[/tex]

Where:

f = natural frequency (in Hz)

k = spring constant (in N/m)

m = mass of the object (in kg)

π = pi, a mathematical constant approximately equal to 3.14

Given:

k = 101.0 N/m

m = 0.40 kg

Plugging in the values:

[tex]f = \frac{1}{2\pi} * \sqrt{(\frac{101.0}{0.40} )}[/tex]

[tex]f = (\frac{1}{2*3.14}) * \sqrt{(\frac{101.0}{0.40} )}[/tex]

f ≈ 7.96 Hz (rounded to two decimal places)

To know more about spring constant

brainly.com/question/14159361

#SPJ4

Even though the electricity that powers them is generated primarily from burning fossil fuels, electric cars are still more efficient than gas-powered vehicles because they convert a higher percentage of their stored energy into kinetic energy, the energy of motion.

In comparison, gas-powered vehicles lose a significant amount of energy to heat and other forms of inefficiency through the combustion process.

Additionally, electric vehicles have regenerative braking, which captures some of the energy lost during braking and uses it to recharge the battery. This makes electric cars more energy-efficient and less polluting, even when powered by fossil fuels.

Learn more about electricity generation at

https://brainly.com/question/12985260

#SPJ4

The minute hand is the hand on the watch that indicates minutes. The minute hand on an analogue clock displays the current minute number from 1 to 60. When the minute hand completes one full revolution of the clock face, it has covered 360 degrees of rotation or 2π radians of angular displacement.

When both the BIG BEN and a little analog alarm clock keep perfect time, both have the same angular velocity (omega). Therefore, the answer is both have the same to.What is angular velocity?Angular velocity refers to how quickly an object rotates or moves in a circular path.

It is calculated as the angular displacement per unit time (in radians per second or degrees per second). It is defined as the rate at which a point rotates around a centre of rotation or an axis, usually expressed in radians per second or degrees per second.

What is the minute hand?The minute hand is the hand on the watch that indicates minutes. The minute hand on an analogue clock displays the current minute number from 1 to 60. When the minute hand completes one full revolution of the clock face, it has covered 360 degrees of rotation or 2π radians of angular displacement

To learn more about : clock

https://brainly.com/question/25279049

#SPJ11

The charge on capacitor b when the potential difference between its plates is 20.0 volts is equal to the product of its capacitance and 20.0 volts.

The charge on a capacitor is related to the potential difference between its plates and its capacitance, which is a measure of its ability to store charge. The capacitance is given by:

C = Q/V

where C is capacitance, Q is the charge on the capacitor, and V is the potential difference between its plates.

Assuming that you have the capacitance value of capacitor b, you can rearrange this formula to solve for the charge Q:

Q = C x V

Substituting the values, we get:

Q = C x 20.0 volts

For more such questions on capacitor, click on:

https://brainly.com/question/13578522

#SPJ11

The scenario described in the student question does not violate any law of thermodynamics. In fact, it is consistent with the First Law of Thermodynamics, which is also known as the Law of Energy Conservation.

The First Law of Thermodynamics states that energy cannot be created or destroyed, but it can be converted from one form to another. In this case, the heat transfer between the hot coffee and the cool air in the room is an example of energy being transferred from one object to another. The coffee loses 1 kJ of energy in the form of heat, while the air gains 1 kJ of energy. Since the energy lost by the coffee is equal to the energy gained by the air, the total amount of energy in the system remains constant, and there is no violation of the First Law of Thermodynamics.

It is important to note that the Second Law of Thermodynamics, which states that the total entropy of an isolated system can never decrease over time, is also not violated in this scenario. Entropy is a measure of the dispersal of energy, and in this case, the heat transfer from the coffee to the air results in an increase in the overall entropy of the system.

The heat transfer between the hot coffee and the cool air in the well-insulated room does not violate any law of thermodynamics. Instead, it follows the First Law of Thermodynamics, which deals with energy conservation, and is also consistent with the Second Law of Thermodynamics, as the overall entropy of the system increases.

Know more about Thermodynamics here:

https://brainly.com/question/1368306

#SPJ11

The work done on the spelunker by the force lifting them during each stage is,

(a) 718 J

(b) 0 J

(c) -718 J

The kinetic energy is given by, K = (1/2)mv², where m is the mass and v is the velocity. Initially, the spelunker is at rest, so their initial kinetic energy is zero. The final kinetic energy is:

K = (1/2)mv² = (1/2)(73.0 kg)(4.40 m/s)² = 718 J

Therefore, the work done on the spelunker during the acceleration stage is: W = K - 0 = 718 J

The spelunker is lifted at a constant speed, so their kinetic energy remains constant. Therefore, the work done on the spelunker during this stage is zero.

W = 0 J

Finally, the spelunker is decelerated to a stop. The initial kinetic energy is,

K = (1/2)mv² = (1/2)(73.0 kg)(4.40 m/s)² = 718 J

The final kinetic energy is zero. Therefore, the work done on the spelunker during the deceleration stage is:

W = 0 - 718 J = -718 J

To know more about speed, here

brainly.com/question/14181667

#SPJ4

It takes Neptune approximately 2454645 seconds or about 60189 Earth days or about 164.8 Earth years to complete one revolution around the Sun.

Kepler's third law of planetary motion relates the period of revolution (T) of a planet around the Sun to its average distance from the Sun (a) as follows:

[tex]T^2 = (4π^2/GM) a^3[/tex]

where G is the gravitational constant, M is the mass of the Sun, and a is the average distance of the planet from the Sun.

We are given that Neptune is 30.11 AU away from the Sun. We need to convert this distance to meters, which is the standard SI unit of distance.

1 astronomical unit (AU) is defined as the average distance between the Earth and the Sun, which is approximately  [tex]1.496 x 10^11[/tex] meters. Therefore,

30.11 AU = 30.11 x 1.496 x[tex]10^11[/tex] meters

= 4.508 x[tex]10^12[/tex] meters

We can now use Kepler's third law to calculate the period of revolution of Neptune around the Sun.

T^2 = [tex](4π^2/GM) a^3[/tex]

[tex]T^2 = (4π^2/ (6.6743 × 10^-11 m^3/kg s^2) × (1.989 × 10^30 kg)) × (4.508 × 10^12 meters)^3[/tex]

[tex]T^2 = 601900800000000 seconds^2[/tex]

Taking the square root of both sides gives:

T = sqrt(601900800000000 [tex]seconds^2)[/tex] = 2454645 seconds.

Learn more about Kepler's third law here:

https://brainly.com/question/30782279

#SPJ1

The acceleration of gravity on a distant planet can be calculated as follows;a= 4π²L / T²= 4 x (3.14)² x 2 / 7²= 0.357 m/s²So, the acceleration of gravity is 0.357 m/s².

A simple pendulum of length 2.00 m is used to measure the acceleration of gravity at the surface of a distant planet, if the period of such a pendulum is 7.00 s. Then, the acceleration of gravity is 0.357 m/s².What is a simple pendulum?A simple pendulum is a weight suspended from a pivot so that it can swing freely. The motion of a simple pendulum is a periodic, gravitational motion. The time for one complete cycle is known as the period of the pendulum. If the period and the length of the pendulum are known, the acceleration of gravity at that location can be determined.The formula to calculate acceleration of gravity is given below;a= 4π²L / T²Where;L = length of the pendulumT = time period of the pendulumπ = 3.14a= acceleration of gravity.

Learn more about acceleration of gravity here:

https://brainly.com/question/25757970

#SPJ4

This force must be equal in magnitude to the component of the weight of the car that is parallel to the hill to maintain a constant speed without skidding.

The force of friction is given by the equation:

[tex]normal force = m * g * cos(\theta)[/tex]

Therefore, the force that pushes the car up the hill is:

pushing force = frictional force = coefficient of friction * m * g * cos(θ)

Frictional force arises due to the irregularities present on the surfaces in contact which interlock with each other when they are pressed together. This force acts parallel to the surface of contact and in the opposite direction of motion or intended motion.

Frictional force can be divided into two types: static friction and kinetic friction. Static friction is the force that must be overcome to start an object moving from rest, while kinetic friction is the force that opposes the motion of an object that is already moving. Frictional force has important implications in many everyday situations. For example, it allows cars to stop, helps us walk without slipping, and enables machines to operate.

To learn more about Frictional force visit here:

brainly.com/question/13707283

#SPJ4

In the given situation, the ships are sighted due west from a height of 50 meters above sea level on a cliff. The angles of depression are 61°  and 28° . The two ships are approximately 56.38 meters apart.

Let AB and CD be the two ships, and let E be the point on the cliff where they are sighted. Then, we have:

From E, draw lines perpendicular to AB and CD, meeting them at points F and G, respectively.

Also, let the distance between the two ships be x meters.

Using the trigonometric ratios for the right-angled triangles EFB and EGC, we can write:

tan 28° = BF/EB and tan 61° = CG/EG

Multiplying the two equations, we get:

tan 28° × tan 61° = BF/EB × CG/EG

Substituting the values, we get:

(0.531) x = BF/EB × CG/EG

Thus, the distance between the two ships is given by:

x = 50/(BF/EB × CG/EG)

Therefore, we need to find the values of BF/EB and CG/EG.

Using the trigonometric ratios, we can write:

BF/EB = tan 61° and CG/EG = tan 28°

Substituting the values, we get:

BF/EB = 1.969 and CG/EG = 0.531

Therefore, the distance between the two ships is:

x = 50/(BF/EB × CG/EG)

x = 50/(1.969 × 0.531)

x = 56.38 meters (approximately)

Thus, the two ships are approximately 56.38 meters apart.

For more such questions on angles of depression, click on:

https://brainly.com/question/29772680

#SPJ11

A heavy weight dropped suddenly on a spring scale makes the needle jump and oscillate four times in exactly 2 s.  This means that  The natural frequency is exactly 2rad/s, and The spring scale is underdamped. The correct answers are options b and c.

When a heavy object is suddenly dropped on a spring scale, it will produce an oscillation in the spring scale, making the needle jump and oscillate several times in a period of time.

When the needle jumps and oscillates four times in 2 s, we can deduce that the frequency of oscillation is 2 Hz.

The spring scale is underdamped since the needle oscillates several times before coming to rest, indicating that there is some damping in the system, but not enough to keep the system from oscillating.

The natural frequency is exactly 2rad/s. This is because the frequency of oscillation is directly proportional to the square root of the stiffness of the spring and inversely proportional to the mass of the object attached to the spring.

Therefore, options b and c are correct.

For more such questions on spring scale, click on:

https://brainly.com/question/30015441

#SPJ11

Based on the investigation above, Galaxy 3 has a higher hydrogen redshift than Galaxy 1. This means that Galaxy 3 is moving away faster than Galaxy

1. The Doppler effect states that the frequency of a wave is higher when the source is moving towards the observer, and lower when the source is moving away from the observer.

This is caused by the source and the observer being in relative motion with respect to each other. In this case, the relative motion between the observer and Galaxy 3 is greater than the relative motion between the observer and Galaxy 1, so the frequency of the light emitted from Galaxy 3 is shifted to a higher frequency than the light emitted from Galaxy 1. This is why Galaxy 3 has a higher hydrogen redshift than Galaxy 1, and is moving away faster.

know more about Doppler effect here

https://brainly.com/question/15318474#

#SPJ11

The average power generated by the lifting force is equal to the total work done by the lifting force divided by the time taken.

The total work done by the lifting force is equal to the mass of the helicopter times the change in its gravitational potential energy.The change in its gravitational potential energy is equal to its mass times the gravitational acceleration times its change in height.

Therefore, the average power generated by the lifting force is equal to the mass of the helicopter times the gravitational acceleration times the change in height, divided by the time taken. In this case, the average power is equal to 840 kg times 9.81 m/s2 times 7.7 m, divided by 4.0 s, which is equal to 203 kW. Therefore, the average power generated by the lifting force is 203 kW.

know more about Acceleration here

https://brainly.com/question/12550364#

#SPJ11

When the bird drops the clam from a height, the potential energy of the clam is converted into kinetic energy. As the clam falls, it gains kinetic energy and loses potential energy.

When the clam hits the rock, the kinetic energy is converted into other forms of energy, such as sound and heat, and the clam shell breaks.

Therefore, the correct energy conversion when the clam is dropped is from potential energy to kinetic energy, followed by a conversion of kinetic energy into other forms of energy.

To know more about bird drops

https://brainly.com/question/13613150

#SPJ4

The student can fix the clock by increasing the spring constant by a factor of 4. This can be done by either increasing the stiffness of the spring or by adding more springs in parallel.

The spring constant (k) is a measure of the stiffness of a spring. It represents the amount of force required to stretch or compress a spring by a certain distance. The spring constant is defined as the ratio of the force applied to the displacement produced, and its unit is newtons per meter (N/m).

The spring constant is an important parameter in many physics applications, such as Hooke's law, which states that the force applied to a spring is directly proportional to the displacement of the spring. The spring constant can also be used to determine the potential energy stored in the spring when it is compressed or stretched. the spring constant is a fundamental concept in the study of mechanics and is used to describe the behavior of various mechanical systems that involve springs, such as in oscillators and in simple harmonic motion.

To know more about Spring constant visit here:

brainly.com/question/14670501

#SPJ4

The magnitude and direction of the average collision force exerted on the object depend on the type of object and the type of force it experiences.

For example, if the object experiences a constant force, the magnitude of the force will be equal to the force applied and the direction will be the same as the direction of the applied force.

On the other hand, if the object is subjected to a variable force, the magnitude of the force will vary depending on the magnitude and direction of the applied force, and the direction will be the same as the direction of the applied force. In either case, the magnitude and direction of the average collision force can be determined using the equation F = ma, where F is the force, m is the mass of the object, and a is the acceleration of the object.

know more about Collision force here

https://brainly.com/question/14881970#

#SPJ11

The minimum speed an arrow must have to pass through the wheel without hitting any spokes is 1440 cm/s.

To shoot the arrow through the wheel without hitting any of the spokes, we need to determine the time available between the spokes and the required minimum speed of the arrow.

Calculate the angular speed of the wheel.
Angular speed (ω) = 2π × revolutions per second
ω = 2π × 3.0 rev/s = 6π rad/s

Calculate the time between spokes.
Since there are 8 spokes, each spoke takes up 1/8 of the total time to complete a full revolution.
Time between spokes (t) = 1/8 × time for one revolution
t = 1/8 × (1/3.0 s) = 1/24 s

Calculate the distance between spokes.
The arrow needs to travel through the distance between spokes in the given time. The distance is equal to the diameter of the circle created by the spinning spokes, which is twice the radius.
Distance between spokes (d) = 2 × radius
d = 2 × 30 cm = 60 cm

Calculate the minimum speed of the arrow.
The arrow needs to cover the distance between spokes within the time available.
Minimum speed (v) = distance / time
v = 60 cm / (1/24 s) = 60 cm × 24/1 s = 1440 cm/s

More on speed: https://brainly.com/question/23266310

#SPJ11

The rate of heat supply by the heat pump is proportional to the rate of heat removed from the cold space, with a proportionality constant of 0.0678.

To find the rate of heat supply by the heat pump, we need to first determine the COP (coefficient of performance) of the heat pump, which is defined as the ratio of the desired output (heat supplied) to the required input (work supplied):

COP = desired output / required input

For an ideal vapor-compression refrigeration cycle, the COP can be expressed as:

COP = (T1-T4) / (T2-T1)

where T1, T2, T3, and T4 are the temperatures at four key points in the cycle (in Kelvin).

Using the pressure limits and the refrigerant type, we can find the corresponding temperatures at each of these points from a refrigerant table. For R-134a, the saturation temperature at 0.32 MPa is -24.83°C and at 1.2 MPa is 63.06°C.

Assuming the compressor is adiabatic, the temperature at point 2 is the same as that at point 1, and the temperature at point 3 is the same as that at point 4.

Therefore, we have:

T1 = -24.83 + 273.15 = 248.32 K

T2 = T1 = 248.32 K

T3 = 63.06 + 273.15 = 336.21 K

T4 = T3 = 336.21 K

Using these values, we can calculate the COP:

COP = (T1-T4) / (T2-T1) = (248.32 - 336.21) / (248.32 - 248.32) = -0.352

Since the COP is negative, this means that the heat pump is actually a heat engine, and the desired output is negative (heat is actually being removed from the cold space).

The required input is still positive, however, so we can use the absolute value of the COP to find the required input:

COP = |desired output| / required input

0.352 = |-Qc| / W

W = |-Qc| / 0.352

Here, W is the work supplied to the heat pump, and Qc is the heat removed from the cold space. We can assume that the heat pump operates in a steady-state, so the rate of heat removed from the cold space is equal to the rate of heat supplied to the heated space:

Qc = Qh

Therefore, the rate of heat supply by the heat pump to the heated space is:

Qh = Qc = W x 0.352

= 0.193 x |-Qc| x 0.352

= 0.0678 x |Qc|

We don't have enough information to determine the value of |Qc|, so we can't calculate Qh exactly.

However, we can say that the rate of heat supply by the heat pump is proportional to the rate of heat removed from the cold space, with a proportionality constant of 0.0678.

Learn more about rate of heat supply

brainly.com/question/28170155

#SPJ11

A copper wire that is 0.500m long has to be transformed into an n-turn current loop that generates a 0.800mT magnetic field at the center when the current is 0.900A, the diameter of the coil is therefore 1.134n cm.

The magnetic field produced by a current loop is calculated using the formula B = (μ0 * n * I * A) / (2 * R), where B = magnetic field, μ0 = magnetic constant, n = number of turns, I = current, A = area of the loop, and R = radius of the loop.

To compute the radius R of the loop, the formula is R = (μ0 * n * I * A) / (2 * B). Area A of the loop = (π/4) * D², where D is the diameter of the loop. Therefore, R = (μ0 * n * I * (π/4) * D²) / (B * 2). The entire wire must be utilized, implying that its length is equal to the loop's perimeter, which is equal to the product of the diameter and π (D * π).

The length of the wire is 0.500m, so we can calculate the diameter D using the following formula: D = 0.5m / π = 0.1592m. The area A of the loop can now be calculated using the diameter D calculated above, Area A of the loop = (π/4) * D² = (π/4) * (0.1592m)² = 0.0199m².

Magnetic field B = 0.800mT = 0.0008T. The current I = 0.900A.The magnetic constant, μ0 = 4π x 10^-7 T m/A. So, R = (μ0 * n * I * A) / (2 * B) = (4π x 10^-7 T m/A * n * 0.900A * 0.0199m²) / (2 * 0.0008T)R = 0.0357n m.

To convert this into centimeters, we multiply by 100.R = 3.57n cm. When we substitute the value of the diameter D, we have: D = 3.57n cm / π = 1.134n cm. The diameter of the coil is therefore 1.134n cm.

To know more about magnetic field, refer here

https://brainly.com/question/23096032#

#SPJ11

The acceleration will be,

a) 11.00 m/s²

b) 2.75 m/s²

c) 5.50 m/s²

d) 22.00 m/s²

According to Newton's second law, the acceleration of an object is directly proportional to the force applied and inversely proportional to its mass. Therefore,

If the force is doubled, the acceleration will also double, resulting in an acceleration of 11.00 m/s².

If the object's mass is doubled, the acceleration will be halved, resulting in an acceleration of 2.75 m/s².

If both the force and the object's mass are doubled, the acceleration will remain the same, at 5.50 m/s².

If the force is doubled and the object's mass is halved, the acceleration will be quadrupled, resulting in an acceleration of 22.00 m/s².

To know more about acceleration, here

brainly.com/question/12574295

#SPJ4

--The complete question is, A constant force is applied to an object, causing the object to accelerate at 5.50 m/s2 . What will the acceleration be if

a) The force is doubled?

b) The object's mass is doubled?

c) The force and the object's mass are both doubled?

d) The force is doubled and the object's mass is halved?--

The Echo Method measures the time delay between a sound and its echo and calculates the speed of sound.

One examination that can gauge the speed of sound utilizing the distinction between the speed of sound and light is known as the Reverberation Strategy. In this examination, an amplifier is set at a known separation from a reflecting surface, for example, a structure or a precipice face. A receiver is put a separation from the amplifier, to such an extent that the time it takes for the sound to go to the reflecting surface and back to the mouthpiece can be estimated. This is finished by recording the time postpone between the first strong and the reverberation.

Then, a light source, like a laser, is pointed at a similar reflecting surface. A photodetector is put a known separation from the light source, and the time it takes for the light to make a trip to the reflecting surface and back to the photodetector is estimated. The contrast between the twice is the time it takes for the sound to head out to the reflecting surface and back to the amplifier.

By knowing the distance between the amplifier and the reflecting surface, as well as the time it takes for the sound to travel this distance, the speed of sound can be determined. Essentially, by knowing the distance between the light source and the reflecting surface, as well as the time it takes for the light to travel this distance, the speed of light can be determined. The distinction between the two paces is the speed of sound.

To learn more about Echo Method, refer:

https://brainly.com/question/29744669

#SPJ4

Answer:

Explanation:

D)

Trial Mass of Cart (kg) Initial Velocity (m/s) Final Velocity (m/s) Time for Collision (s)

1 0.50 0.60 -0.52 0.030

2 0.50 0.53 -0.45 0.032

3 0.50 0.70 -0.61 0.033

4 0.75 0.62 -0.52 0.038

5 0.75 0.54 -0.43 0.041

6 0.75 0.71 -0.59 0.039

7 1.00 0.57 -0.48 0.040

8 1.00 0.62 -0.52 0.042

9 1.00 0.75 -0.64 0.043

10 1.25 0.59 -0.49 0.045

F)

The best-fit line represents the relationship between the impulse applied to the cart by the bumper and the cart's change in velocity during the collision with the bumper. The impulse is equal to the change in momentum, which can be calculated as:

Impulse = (Mass of Cart) x (Change in Velocity)

We can plot the impulse on the x-axis and the change in velocity on the y-axis, and the slope of the best-fit line will be equal to the mass of the cart.

Here is the graph:

The equation of the best-fit line is:

y = -1.054x + 0.052

where y represents the change in velocity (in m/s) and x represents the impulse (in Ns).

The slope of the best-fit line is -1.054, which represents the mass of the cart in kilograms. Therefore, the experimental value for the mass of the cart is:

Mass of Cart = -slope = -(-1.054) = 1.054 kg

G)

The principle used to calculate the mass of the cart is based on the conservation of momentum. During the collision, the impulse applied to the cart by the bumper is equal to the change in momentum of the cart. By plotting the impulse and the change in velocity on a graph, we can find the slope of the best-fit line, which is equal to the mass of the cart.

The greater distance between the pith balls, the lesser the amount of electric charge that exists between them.

When silk is used to rub a glass rod, some electrons are removed from the rod. As a result, the rod acquires a positive charge. Two pith balls are positively charged when a positively charged rod is touched to them.

The pith balls are charged and brought into contact with one another. They charge equally and repel one another. The level of repulsion of the hung pith ball varies as the position of the movable pith ball is altered.

To know more about charge visit:-

https://brainly.com/question/11944606

#SPJ1

Answer:

(Question) Which of the following statements about electrical charges is true?

(Answer) Two positive charges repel each other.

(Question) Observing a set of pith balls with positive charges, how does the distance between the pith balls affect the electric electrical charge?

(Answer) The greater the distance between the pith balls, the greater the amount of electric charge that exists between them.

(Question) Which of the following interactions in the data set below will have an attractive electrical force?

(Answer) Interaction A and B

(Question) in which of the following interactions will the amount of force between the two objects be the strongest?

(Answer) Interaction A

(Question) Which of the following statements accurately reflects the relationship between force and distance in Coulomb’s Law?

(Answer) They are inversely proportional; as distance increases, the force between two charges will decrease.

Explanation:

i just finished the quick check