Three ballet dancers are positioned on stage. Max is 2 feet straight behind Kenji and 4 feet directly left of Lindsey. When the music begins, Max twirls to Lindsey's position, then leaps to Kenji's position, and finally walks back to his original position. How far did Max travel? If necessary, round to the nearest tenth.

Check the picture below.

Answer:

x = 14

Step-by-step explanation:

m∠B and m∠D are congruent angles, which means they are equal in measurement.

We can write the following equation to find the value of x:

5x - 7 = 3x + 21

5x - 3x = 21 + 7

2x = 28

x = 14

To find the measure of m∠B, replace x with 14:

5 × 14 - 7 = 63°

63 + m∠C = 180

m∠C = 117°

The probability of Carlos drawing a blue marble, not replacing it, and then drawing another blue marble is E. 2/15.

The probability of drawing a blue marble on the first draw is 4/10 (since there are 4 blue marbles out of a total of 10 marbles in the bag).

If Carlos does not replace the first blue marble, then there will be 9 marbles left in the bag, of which 3 will be blue. So the probability of drawing another blue marble on the second draw is 3/9.

To find the probability of both events occurring, we multiply the probabilities together:

Probability of drawing a blue marble on the first draw: 4/10

Probability of drawing a blue marble on the second draw, given that the first draw was blue: 3/9

Probability of drawing two blue marbles in a row: (4/10) * (3/9) = 2/15, or approximately 0.133.

Therefore, the probability of Carlos drawing a blue marble, not replacing it, and then drawing another blue marble is approximately 0.133.

Learn more about probability on:

https://brainly.com/question/24756209

#SPJ1

A bag has 6 red and 4 blue marbles. What is the probability Carlos draws a blue marble, does not replace it, and then draws another blue marble?

7/105

6/225

1/35

2/90

2/15

The amplitude of the sine equation y = 2sin(Θ) - 3 is 6.

What is Graph ?

A graph is a data structure that represents a set of objects and the relationships between them. It consists of a collection of vertices (also known as nodes or points) and a collection of edges (also known as links or arcs) that connect the vertices.

The amplitude of a sine function is the distance between the maximum and minimum values of the function.

From the given graph of y = 2sin(Θ) - 3, we can see that the maximum value of the function is 2 and the minimum value is -4.

Therefore, the amplitude is the absolute value of the difference between the maximum and minimum values:

amplitude = |2 - (-4)| = |2 + 4| = 6

So, the amplitude of the sine equation y = 2sin(Θ) - 3 is 6.

To learn more about Graph from given link.

https://brainly.com/question/29183673

#SPJ1

The patient's systolic pressure will be the lowest during the time interval 5 < t < 8, when they take the medication at 9 a.m.

The given piecewise function for systolic pressure S(t) has two segments, one for the time interval 5 < t < 8 and another for 8 ≤ t ≤ 12.

For 5 < t < 8, the systolic pressure is a constant value of 115. Therefore, the systolic pressure remains the same during this time interval, and it will not be the lowest.

For 8 ≤ t ≤ 12, the systolic pressure increases linearly with time, starting from 140 and increasing by 9 units every hour. Therefore, the systolic pressure at the beginning of this interval is 140, and it increases until it reaches the maximum value of 211 at t=12.

Since the systolic pressure is highest at the end of the second interval, the lowest value of the systolic pressure must occur in the first interval, which is 5 < t < 8. Therefore, the patient's systolic pressure will be lowest during this time interval, and it will be a constant value of 115.

Learn more about piecewise function here

brainly.com/question/28225662

#SPJ4

The given question is incomplete, the complete question is:

When a patient with hypertension takes a particular type of blood pressure medication, the effects on the systolic pressure, S(t), can be (140-5tif Osts 5 measured by the following piecewise defined function: S(t) = 115 if 5<t<8 - where t is the time, in hours, since 43 +9t if 8sts 12 taking the medication. Based on the graph of the piecewise function, if the patient takes the blood pressure medication at 9 a.m., in which interval will their systolic pressure be lowest?

The relationship between length and weight can be modeled by a power function.

The fact that the scatterplot of the natural logarithm of weight vs. the natural logarithm of length shows a more linear relationship suggests that the relationship between length and weight can be better modeled by a power function rather than an exponential function. This is because when the logarithms of both variables are taken, an exponential function becomes a linear function, while a power function remains a non-linear function.

In a power function, one variable is raised to a power that is not necessarily an integer, whereas in an exponential function, one variable is raised to a constant power. Therefore, it is more likely that the relationship between length and weight can be modeled by a power function.

To know more about logarithms, here

brainly.com/question/24626259

#SPJ4

Answer:

The proportion that is false is 18/48 = 30/50.

Step-by-step explanation:

To determine which of the given proportions is false, rewrite the fractions on both sides each equation so that the denominators are the same.

[tex]\dfrac{12}{15}=\dfrac{20}{25} \implies \dfrac{12 \div 3}{15 \div 3}=\dfrac{20 \div 5}{25 \div 5}\implies \dfrac{4}{5}=\dfrac{4}{5}\qquad \boxed{\sf True}[/tex]

[tex]\dfrac{25}{45}=\dfrac{50}{90} \implies \dfrac{25 \div 5}{45\div 5}=\dfrac{50\div 10}{90\div 10}\implies \dfrac{5}{9}=\dfrac{5}{9}\qquad \boxed{\sf True}[/tex]

[tex]\dfrac{20}{50}=\dfrac{40}{100} \implies \dfrac{20\div 10}{50\div 10}=\dfrac{40\div20}{100\div 20}\implies \dfrac{2}{5}=\dfrac{2}{5}\qquad \boxed{\sf True}[/tex]

[tex]\dfrac{18}{48}=\dfrac{30}{50} \implies \dfrac{18\times 25}{48\times 25}=\dfrac{30\times 24}{50 \times24}\implies \dfrac{450}{1200}= \dfrac{720}{1200}\qquad \boxed{\sf False}[/tex]

Therefore, the proportion that is false is 18/48 = 30/50.

The minimum number of customers that need to be included in the test is 1492 members to determine if the new plan has more than a 6% point effect on customer retention, with 90% confidence.

The z-score corresponding to the desired confidence level of 90% = 1.645

The retention rate under the old plan =  1-p = = 0.7

The margin of error = E = 6 percentage points = 0.06

To calculate the minimum number of customers needed for the test, we can use the following formula:

[tex]n = (Z^2 * p * (1-p)) / E^2[/tex]

[tex]n = (1.645^2 * p * (1-p)) / 0.06^2[/tex]

assuming that p = 0.5

n = (1.645^2 * 0.5 * (1-0.5)) / 0.06^2

n = 1492

Therefore we can conclude that the minimum number of customers that need to be included in the test is 1492 members.

To learn more about Z score and confidence problems,

https://brainly.com/question/15349060

#SPJ4

Answer:

Answer: (x + 2.5)² + (y + 4.4)² = 49/16.

Step-by-step explanation:

Answer: Let's assume that the zeros of the given quadratic equation are a and 1/a, since they are reciprocals of each other. By the sum-product relationships for zeros of a quadratic equation, we have:

a + 1/a = -b/a1 = -4/(1-3k) (where b = 4 and a1 = 1-3k)

Multiplying both sides by a1, we get:

a1(a + 1/a) = -4

Expanding the left-hand side, we get:

a1a + a1/a = -4

Multiplying both sides by a, we get:

a1a² + a1 = -4a

Substituting a1 = 1-3k, we get:

(1-3k)a² + (1-3k) = -4a

Rearranging, we get:

(1-3k)a² + 4a + (3k-1) = 0

Since a is one of the zeros of the quadratic, we know that the quadratic can be factored as:

(1-3k)(a - r)(a - s) = 0

where r and s are the other two roots of the quadratic. By expanding the left-hand side, we get:

(1-3k)(a² - (r+s)a + rs) = 0

Comparing with the expanded form of the quadratic, we see that:

r + s = -4/(1-3k)

rs = (3k-1)/(1-3k)

By Vieta's formulas, we know that rs = c/a1, where c is the constant term of the quadratic. Substituting c = -5 and a1 = 1-3k, we get:

rs = -5/(1-3k)

Equating this with the expression we obtained earlier for rs, we get:

-5/(1-3k) = (3k-1)/(1-3k)

Multiplying both sides by 1-3k and simplifying, we get:

-5 = (3k-1)(3k-2)

Expanding the right-hand side, we get:

-5 = 9k² - 15k + 2

Simplifying, we get:

9k² - 15k - 7 = 0

Using the quadratic formula, we get:

k = (15 ± sqrt(15² + 497))/18

k = (15 ± sqrt(429))/18

Therefore, the two possible values of k are:

k = (15 + sqrt(429))/18 ≈ 1.57

k = (15 - sqrt(429))/18 ≈ -0.24

Note that both of these values of k satisfy the condition that the zeros of the quadratic are reciprocals of each other.

Step-by-step explanation:

Answer: Three of eight sectors do not move the token; this area is 35.9 in2.

To find the radius of the spinner:      A  =  pi · r2

                                                    35.9  =  (3/8) · pi · r2

                                                    35.9  =  1.1781 · r2

                                                   30.73  =  r2

                                                           r  =  5.5 in

Step-by-step explanation:

Therefore, we have proved that in parallelogram ABCD, AB is congruent to CD and BC is congruent to DA.

A parallelogram is a four-sided polygon (a flat, closed shape) with two pairs of parallel sides. The opposite sides of a parallelogram are equal in length and parallel to each other. The opposite angles of a parallelogram are also equal. Parallelograms can have different shapes and orientations, but they always have these defining properties of parallel sides and equal opposite angles and sides. Examples of shapes that are parallelograms include rectangles, squares, and rhombuses.

Given: ABCD is a parallelogram.

Draw diagonal AC.

1. By definition of a parallelogram, BC || DA.

2. By the Unique Line Postulate, there is exactly one line through A that is parallel to BC.

3. By the Reflexive Property of Congruence, AC is congruent to itself.

4. By the definition of alternate interior angles, angle BCA is congruent to angle DAC.

5. By the Alternate Interior Angles Theorem, angle DAC is congruent to angle ZDCA.

6. By the definition of alternate interior angles, angle DCA is congruent to angle ZDCA.

7. By ASA (Angle-Side-Angle) congruence, triangle ABC is congruent to triangle CDA.

8. By CPCTC (Corresponding Parts of Congruent Triangles are Congruent), AB is congruent to CD and BC is congruent to DA.

Therefore, we have proved that in parallelogram ABCD, AB is congruent to CD and BC is congruent to DA.

To know more about congruence, visit:

https://brainly.com/question/7888063

#SPJ1

the particular solution to the given differential equation with the initial condition  [tex]y(pi)=-5[/tex] is: [tex]y = -2 + [(3sec^2(x)-1)/3][/tex]

To find the particular solution to the given differential equation with the initial condition, we can use the method of separation of variables and integrate both sides with respect to x.

Starting with the given differential equation:

[tex]dy/dx = sec^2(x)(2+y)^2[/tex]

We can separate variables and write:

[tex](2+y)^(-2)dy = sec^2(x)dx[/tex]

Integrating both sides, we have:

[tex](2+y)^(-1) = tan(x) + C[/tex]

where C is an arbitrary constant of integration.

To find the value of C, we can use the initial condition y(pi)=-5:

[tex](2+(-5))^(-1) = tan(pi) + C[/tex]

[tex](2-5)^(-1) = 0 + C[/tex]

[tex]C = -1/3[/tex]

Substituting this value of C back into the general solution we obtained earlier, we get:

[tex](2+y)^(-1) = tan(x) - 1/3[/tex]

Multiplying both sides by  [tex](2+y)[/tex] , we can solve for y:

[tex]y = -2 ± [(3sec^2(x)-1)/3][/tex]

Therefore, the particular solution to the given differential equation with the initial condition   [tex]y(pi)=-5[/tex] is: [tex]y = -2 + [(3sec^2(x)-1)/3][/tex]

Learn more about equation here:

https://brainly.com/question/14620493

#SPJ1

The constant in the given expression is

C. 9

In a mathematical expression, a constant is a value that does not change and remains the same throughout the expression or equation.

It is a fixed numerical value, coefficient, or term that is independent of the variable(s) in the expression.

For example, in the expression 15x^2 + 2x + 9, the constant is 9, as it remains the same regardless of the value of x.

Learn more about mathematical expression at;

https://brainly.com/question/1859113

#SPJ1

The most relevant answer to this question is researcher conducting a qualitative study knows that saturation of information has occurred when data collected confirms theoretical models.

In qualitative research, data saturation refers to when the collection of new data no longer leads to additional ideas or themes.

In other words, saturation occurs when data has been thoroughly explored and little or no new information or new patterns emerge.

so, the researcher can be sure that he or she has collected enough data to answer the research question, and collecting more data is unlikely for new insights.

Therefore, Using the data provided, we can calculate:  

x = (38.1 + 38.4 + 38.3 + 38.2 + 38.2 + 37.9 + 38.7 + 38.6 + 38.0 + 38.2) / 10 = 38.25

In a t distribution table or calculator, find the t value with 9 (n-1) degrees of freedom and 95% confidence intervals. This is approximately 2.262.

Substituting these values ​​into the formula gives:

therefore, the most relevant answer to this is data collected confirms theoretical models.

This means that the researcher has collected enough data to confirm or disprove their original theoretical models, and collecting more data is unlikely to change those models. 

learn more about  qualitative research

brainly.com/question/13498255

#SPJ4

The distance between City A and City B is approximately 2300.55 miles, rounded to the nearest hundredth of a mile.

Let's assume that City A is at latitude 6 degrees north and City B is at latitude 38 degrees north. Since they have the same longitude, we can assume a longitude of 0 degrees for both cities. We also have the radius of the Earth, which is 3960 miles.

Using the Haversine formula, the distance (d) between the two cities can be calculated as:

d = 2r * arcsin( sqrt( sin²((latB - latA)/2) + cos(latA) * cos(latB) * sin²((lonB - lonA)/2)) )

where r is the radius of the Earth, latA and latB are the latitudes of City A and City B in radians, and lonA and lonB are the longitudes of City A and City B in radians.

Converting the latitudes and longitudes to radians, we get:

latA = 6° * pi / 180 = 0.10472 radians

latB = 38° * pi / 180 = 0.66323 radians

lonA = 0° * pi / 180 = 0 radians

lonB = 0° * pi / 180 = 0 radians

Substituting the values in the formula, we get:

d = 2 * 3960 * arcsin( sqrt( sin²((0.66323 - 0.10472)/2) + cos(0.10472) * cos(0.66323) * sin²((0 - 0)/2)) )

Simplifying the expression, we get:

d ≈ 2300.55 miles

Therefore, the distance between City A and City B is approximately 2300.55 miles, rounded to the nearest hundredth of a mile.

Learn more about Distance

brainly.com/question/15172156

#SPJ11

The marine biologist should select a sample of 38 mahi mahi to estimate the population means within 1.48 pounds with 90% confidence.

To determine the sample size needed for estimating the population mean within a certain margin of error with a 90% confidence level, we can use the following formula:

n = (z*(σ/√n))/E

where:

z = the z-score corresponding to the desired confidence level (in this case, 1.645 for 90%)

σ = the population standard deviation (7.6 pounds)

E = the desired margin of error (1.48 pounds)

n = the sample size

Substituting the given values, we get:

n = (1.645*(7.6/√n))/1.48

Simplifying

n = 3.841n/3.501

n = 1.097n

n ≈ 37.8

Rounding up to the nearest whole number, we get:

n = 38

Therefore, the marine biologist should select a sample of 38 mahi mahi to estimate the population means within 1.48 pounds with 90% confidence.

Learn more about sample size, here:

https://brainly.com/question/31347346

#SPJ1

Using percentages, we can find that out of the 80 sandwiches sold 16 were salami sandwiches.

Option B is correct.

The denominator of a percentage, also known as a ratio or a fraction, is always 100. For instance, Sam would have received 30 points out of a possible 100 if he had received a 30% on his maths test. Here, "percent" or "percentage" is used to translate the percentage symbol "%." The percent symbol can always be changed to a fraction or decimal equivalent by using the phrase "divided by 100."

Here, the total number of sandwiches sold = 80.

In the chart we can see that out of 80 sold sandwiches, 205 of the sandwiches were salami.

So, 20% of 80

= 20/100 × 80

= 1600/100

= 16.

Therefore, 16 salami sandwiches were sold out of the 80.

To know more about percentages, visit:

https://brainly.com/question/24159063

#SPJ1

The complete question is:

The deli sold a total of 80 sandwiches. How many salami sandwiches were sold?

4

16

64

20

Answer:

Tucker has 2 one-dollar bills, 1 five-dollar bill, and 12 ten-dollar bills.

Step-by-step explanation:

Prolongation of the aPTT test can be caused by a clotting factor level less than 40%, indicating potential bleeding disorder or inadequate anticoagulant therapy.

The actuated incomplete thromboplastin time (aPTT) test estimates the time it takes for blood to clump, and it is utilized to screen the viability of anticoagulant treatment or to distinguish draining problems. Prolongation of aPTT shows a lack in at least one coagulating factors.

The base level of a specific thickening element that will cause the aPTT test to become drawn out changes relying upon the particular coagulating factor being tried. Nonetheless, as a rule, a coagulating factor level under 40% is viewed as related with delayed aPTT. Consequently, in the event that the level of a specific thickening component falls underneath 40%, it can cause prolongation of the aPTT test, showing a potential draining problem or a lacking anticoagulant treatment.

To learn more about aptt test, refer:

https://brainly.com/question/30450561

#SPJ4

Answer:

Okay, I think the answer is D (correct me if I'm wrong, first check others' answers before putting it in)

Step-by-step explanation:

How I got this answer is I remembered that the slope is always the coefficient of x. Because 0.75 is the number next to the variable a for arm length you can assume that is the number the arm length increases for how much the height increases.

When (x-5)(x+2) is equal to 0, the value of x can be either 5 or -2.

What is Algebraic expression ?

An algebraic expression is a mathematical phrase that can contain variables, constants, and mathematical operations such as addition, subtraction, multiplication, division, and exponentiation. Algebraic expressions are used to represent and solve problems in many areas of mathematics, science, engineering, and finance.

If (x-5)(x+2) is equal to 0, then either (x-5) = 0 or (x+2) = 0, because the product of two factors is equal to 0 only when at least one of them is equal to 0. Therefore, we have:

x - 5 = 0 or x + 2 = 0

Solving these equations for x, we get:

x = 5 or x = -2

Therefore, when (x-5)(x+2) is equal to 0, the value of x can be either 5 or -2.

To learn more about Algebraic expression from given link.

brainly.com/question/31238826

#SPJ1

Therefore, the solutions to the equation are x=-2+√3 and x=-2-√3.

The square root of a number is a value that, when multiplied by itself, gives the original number.

For example, the square root of 25 is 5, because 5 x 5 = 25.

The symbol used to represent square root is √.

If you want to find the square root of a number using a calculator or computer, you can use the square root function. For example, the square root of 64 can be found by typing "sqrt(64)" into a calculator, which would give you the answer of 8.

If you want to find the square root of a number by hand, there are a few methods you can use depending on the number. One common method is called the "long division method", which involves breaking down the number into factors and finding the square root of each factor. Another method is called the "guess and check method", which involves making educated guesses and adjusting until you find the square root.

Actually, the last step in your given solution is incorrect. Here are the correct steps to complete the square for the equation. [tex]\sqrt{(x^2+4x+1)}=2:[/tex]

Move the constant term to the right-hand side:

[tex]\sqrt{(x^2+4x)} = 1[/tex]

Add half of the coefficient of x squared to both sides:

[tex]\sqrt{(x^{2} +4x+4)}= 1+2[/tex]

Simplify the perfect square trinomial on the left-hand side and simplify the right-hand side:

[tex]\sqrt{(x+2)^2} = 3[/tex]

Take the square of both sides to eliminate the radical:

[tex]x+2 = \sqrt3[/tex]

Solve for x by subtracting 2 from both sides and considering both the positive and negative square root:

x = -2 ± √3

To know more about Square root visit:

https://brainly.com/question/1387049

#SPJ1

Answer:47

Step-by-step explanation:

The probability that 6 specified arrows hit the target is 0.321.

Probability means how likely an event is to occur. In many real-life situations, we may have to predict the outcome of events. We may or may not be fully aware of the outcome of the event. In this case, we say whether it will happen or not. The result often has good applications in sports, and business as a result of forecasting, and the result is also widely used in the field of new intelligence.

Given that:

She shoot 9 arrows,

the probability of each arrow being fitted 0.6.

Therefore,

The probability that 6 specified arrows hit the target is:

(⁸₄) ×(0.6)⁶ ×(0.4)⁶ = 0.321

Learn more about Probability:

https://brainly.com/question/30034780

#SPJ4

The R-square value represents the correct output for the regression models by 71% of the variability in the number of chairs produced can be explained by whether the shift is in the morning or evening and whether it is a weekday shift or weekend shift

The R-square value in regression analysis tells us the proportion of the variability in the response variable.

That can be explained by the regression model.

In this case, the output states that the R-square value is 0.7059.

This means that 70.59% of the variability in the number of chairs produced.

This can be explained by the independent variables in the model which is whether the shift is in the morning or evening and whether it is a weekday or weekend shift.

Therefore, the correct option for the regression model is 'That 71% of the variability in the number of chairs produced can be explained by whether the shift is in the morning or evening and whether it is a weekday shift or weekend shift.'

learn more about regression here

brainly.com/question/31134040

#SPJ4

The above question is incomplete, the complete question is:

Below is some output from the regression on the furniture factory data. What does the R-square value tell us?

That we cannot reject the null hypothesis

That there is multicollinearity between the independent variables

That on average, 0.7059 more chairs are produced during weekday shifts than during weekend shifts.

That 71% of the variability in the number of chairs produced can be explained by whether the shift is in the morning or evening and whether it is a weekday shift or weekend shift.

Therefore , the solution of the given problem of area comes out to be the picture's revised dimensions are 21 feet long and 15 feet wide.

What is scale factor?

A scale factor is when you enlarge a shape and each side is multiplied by the same number. This number is called the scale factor. Maps use scale factors to represent the distance between two places accurately.

What exactly does an area mean?

Its total size can be determined by figuring out how much area would be required to completely enclose its exterior. When choosing a comparable product for the rectangular design, the surrounding area is taken into account. The total measurements of something are determined by its surface area. The volume of water a cuboid can contain depends on the number in sides between its four trapezoidal shapes.

Here,

The initial image's length and width must be multiplied by 3 in order to enlarge it by a scale factor of 3.

=>  7 feet in length at first.

=>  5 foot original diameter

=> New length = 7ft x 3 = 21ft

=>  New width = 5ft x 3 = 15ft

As a result, the picture's revised dimensions are 21 feet long and 15 feet wide.

To know more about scale factor visit:

brainly.com/question/30215119

#SPJ1

Answer(s):

- miles you drive and the amount of gas in your tank

- the level of water in a water tank being drained over time

Step-by-step explanation:

1. The more miles that you drive, the less gas that is in your tank, so this one has a negative association between its variables.

2. The more time you spend running, the more miles you'll have ran, so that's a positive association, not a negative association.

3. The longer a water tank is drained, the less water it'll have in it, so this one has a negative association between its variables.

4. The speed of a train at a constant speed over the next 6 hours can be modeled by a graph with a horizontal line (which has a slope of zero), representing that as the x increases, the y does not change, so there is not a negative association between the variables.

5. The more cups in the stack, the taller it will be, so that's a positive association, not a negative association.

The solution of the given linear inequality will be y ≥ 18.

What are linear inequalities, exactly?

Linear inequalities are mathematical expressions that involve linear functions and the symbols "<", ">", "<=", ">=", or "≠". They are used to describe a range of possible values that a variable can take.

For example, the inequality 3x + 2 > 10 is a linear inequality, where x is a variable. It means that the possible values of x that satisfy the inequality are those that make the expression 3x + 2 greater than 10. The solution set for this inequality is x > 2.

Now,

To solve the inequality y - 6 ≥ 12, we need to isolate y on one side of the inequality sign. We can do this by adding 6 to both sides of the inequality:

y - 6 + 6 ≥ 12 + 6

Simplifying the left side, we get:

y ≥ 18

So the solution set for this inequality is all values of y that are greater than or equal to 18. We can represent this graphically on a number line by shading all values to the right of and including 18:

---|================================>

  18

To know more about linear inequalities visit the link

brainly.com/question/11897796

#SPJ1