The height to which the spans rise when they buckle is 0.0222 m.
A high thermal coefficient: what does that imply?A material will expand more as a result of being heated if its coefficient of thermal expansion is larger.
What does the thermal expansion law mean?The phenomena known as thermal expansion can be seen in solids, liquids, and gases. In this procedure, the application of heat causes an object or body to expand (temperature). The term "thermal expansion" refers to an object's propensity to change its dimensions as a result of heat, including length, density, area, and volume.
The following formula can be used to determine the height to which the spans rise when they buckle:
ΔL = LαΔT
where ΔL = change in length,
L = original length,
α = coefficient of thermal expansion,
ΔT = change in temperature
the length of the bridge = 370 m,
the coefficient of thermal expansion = 1.2 × 10^-5 (°C)^-1,
the change in temperature = 20°C.
The change in length of each span is,
ΔL = LαΔT = (370/2)(1.2 × 10^-5)(20)
= 0.0444 m
Since there are two spans, the total change in length is 0.0888 m.
h = ΔL/2 = 0.0444/2
= 0.0222 m
To know more about the temperature visit;
https://brainly.com/question/15479350
#SPJ1
i need the answers to this assignment please.
Answer:
1.> 374$
2.> in between the age 21 - 64
3.> The data represented above shows the cost of health insurance for each age group where we can clearly see the smooth increase in cost as the age gets bigger.
4.> The graph above shows relation of age with the cost so most likely it will be the same for cars as aging also applies to vechiles.
5.> The graph will follow the same rate of increasement as it goes on and on.
what is the frequency of an electromagnetic wave with a wavelength of 125 nm? what type of electromagnetic wave is this?
Answer:
ν = 4.17×10⁻¹⁶ Hz
Explanation:
c = λν
λ is the wavelength, ν is the frequency, c is the speed of light
ν = λ/c
ν = (125×10⁻⁹m) / (3×10⁸ m/s)
ν = 4.17×10⁻¹⁶ Hz
Ultraviolet electromagnetic wave
The frequency of an electromagnetic wave with a wavelength of 125 nm is 2.4 x 10^15 Hz. The type of electromagnetic wave is Ultraviolet.
What is an electromagnetic wave?
An electromagnetic wave is a type of wave that is created by the movement of charged particles in the environment. Electromagnetic waves travel through space or other materials, like air or water, and can have different wavelengths and frequencies. These waves can travel at the speed of light, and they can be used for many different purposes, including communication, navigation, and medical imaging.
What is wavelength?
The wavelength of a wave is the distance between two consecutive crests or troughs of a wave. It is usually measured in meters, but it can also be expressed in other units, like nanometers (nm) or micrometers (μm). The wavelength of a wave determines its frequency, which is the number of cycles per second that the wave completes.
What type of electromagnetic wave is this?
The electromagnetic wave with a wavelength of 125 nm is an Ultraviolet wave. Electromagnetic waves with wavelengths shorter than 400 nm are known as ultraviolet (UV) waves. They are produced by the sun and can be harmful to living organisms in high doses, but they are also used in many applications, such as sterilization, medical treatment, and fluorescent lighting.
To know more about electromagnetic wave click here:
brainly.com/question/29774932
#SPJ11
Two gases x and y are found in the atmosphere in only trace amounts because they decompose quickly. when exposed to ultraviolet light the half-life of x is 0.75h, while that of y is 90.min. suppose an atmospheric scientist studying these decompositions fills a transparent 5.0l flask with x and y and exposes the flask to uv light. initially, the partial pressure of x is 3.0 times greater than the partial pressure of y. will the partial pressure of x ever be lower than y. if so at what time will it be lower?
The partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).Therefore, option C is correct.
Yes, the partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).[tex]What is the given information in the problem[/tex]?The following information is given in the problem:Two gases x and y are found in the atmosphere in only trace amounts because they decompose quickly.The half-life of x is 0.75 hThe half-life of y is 90 min (1.5 h)The initial partial pressure of x is 3 times greater than yThe total volume of the flask is 5.0 L.[tex]How can we approach the problem?[/tex]We will use the half-life formula and the partial pressure formula to solve the problem.The half-life formula is:t1/2 = 0.693/kHere, k is the first-order rate constant.The partial pressure formula is:P = nRT/VHere,P is the partial pressuren is the number of molesR is the universal gas constantT is the temperatureV is the volume of the flask.Method:First, we will find the first-order rate constant k for both gases using the half-life formula.Then, we will use the partial pressure formula to find the number of moles of both gases x and y in the flask using the given partial pressure and the total volume of the flask.Finally, we will use the first-order rate constant and the number of moles to find the partial pressure of gases x and y at a given time.Let's solve the problem.Steps:1. Find the first-order rate constant k for gas x.t1/2 (x) = 0.75 hUsing the half-life formula,t1/2 = 0.693/kk(x) = 0.693/t1/2 (x)k(x) = 0.693/0.75k(x) = 0.924 h-12. Find the first-order rate constant k for gas y.t1/2 (y) = 90 min = 1.5 hUsing the half-life formula,t1/2 = 0.693/kk(y) = 0.693/t1/2 (y)k(y) = 0.693/1.5k(y) = 0.462 h-13. Find the initial number of moles of gas x in the flask.Partial pressure of x = 3 * Partial pressure of yP(x) = 3 * P(y)P(x) = (3/4) * Total pressure of x and yP(y) = Total pressure of x and yP(x) + P(y) = Total pressure of x and yLet's assume that the total pressure of x and y is P0.P0 = P(x) + P(y)P(x) = (3/4) * P0P(y) = (1/4) * P04. Find the initial number of moles of gas y in the flask.P(y) = n(y)RT/Vn(y) = P(y) * V/RTn(y) = [(1/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(y) = 0.062 mol5. Find the initial number of moles of gas x in the flask.P(x) = n(x)RT/Vn(x) = P(x) * V/RTn(x) = [(3/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(x) = 0.186 mol6. Find the partial pressure of gas x after 1 hour.P(x, 1 h) = n(x)k(x)tP(x, 1 h) = (0.186 mol) * (0.924 h-1) * (1 h)P(x, 1 h) = 0.171 atm7. Find the partial pressure of gas y after 1 hour.P(y, 1 h) = n(y)k(y)tP(y, 1 h) = (0.062 mol) * (0.462 h-1) * (1 h)P(y, 1 h) = 0.028 atm8. Find the partial pressure of gas x after 2 hours.P(x, 2 h) = n(x)k(x)tP(x, 2 h) = (0.186 mol) * (0.924 h-1) * (2 h)P(x, 2 h) = 0.342 atm9. Find the partial pressure of gas y after 2 hours.P(y, 2 h) = n(y)k(y)tP(y, 2 h) = (0.062 mol) * (0.462 h-1) * (2 h)P(y, 2 h) = 0.049 atm10. Find the partial pressure of gas x after 2.25 hours.P(x, 2.25 h) = n(x)k(x)tP(x, 2.25 h) = (0.186 mol) * (0.924 h-1) * (2.25 h)P(x, 2.25 h) = 0.383 atm11. Find the partial pressure of gas y after 2.25 hours.P(y, 2.25 h) = n(y)k(y)tP(y, 2.25 h) = (0.062 mol) * (0.462 h-1) * (2.25 h)P(y, 2.25 h) = 0.052 atmConclusion:Yes.
Learn more about Two gases here:
https://brainly.com/question/28778069
#SPJ4
two autmobiles are equipped with the same single frequency horn. when one is at rest and the other is moving toward the first at 15 m/s, the driver at rest hears a beat frequency of 5.5 hz what is the frequency
The frequency of the horn is 315.5 Hz.What are automobiles.Automobiles are vehicles that are designed to be driven on roads and have four wheels.
They are commonly known as cars in the United States and Canada. Cars, buses, lorries, and trucks are all types of automobiles that can transport people or cargo from one place to another. What is a beat frequency? When two waves with slightly different frequencies interfere, a beat frequency is produced. The beat frequency is the difference between the two waves' frequencies. It's possible to hear beat frequencies. The difference between two frequencies is the beat frequency. The beat frequency is equal to the absolute value of the difference between the two frequencies. There are two cars, one of which is stationary and the other of which is moving towards the first car at 15 m/s. When the driver at rest hears a beat frequency of 5.5 Hz, both automobiles are fitted with the same single frequency horn. Determine the frequency of the horn. Here's how to go about it: Using the formula, we can determine the frequency of the horn as follows:f1 = (f beat + f2)/2We know that: f beat = 5.5 Hzandf2 = v/(λ + vs)Where: v = 15 m/sλ = wavelength of the sound of the horn at rest, that is, when the car is stationary = speed of sound/frequency = 343/ f2vs = relative velocity of sound with respect to the moving vehicles = (v)/(v + us) where us is the speed of sound .The frequency of the horn is:f1 = (5.5 + v/(λ + vs))/2f1 = (5.5 + 15/(343/ f2 + v/(v + us)))/2f1 = 315.5 H
Learn more about Automobiles are vehicles here:
https://brainly.com/question/26477083
#SPJ4
there is no current in the circuit shown until the switch is closed. how much current goes through the 20 ohm resistor the isntant
Current flowing through the circuit when the switch is closed will be I = 10V/30 ohms = 1/3 A (0.333 A)
The potential difference across the 20 ohm resistor is equal to the voltage of battery, 10V. According to Ohm's law, current flowing through the circuit will be determined by the total resistance in the circuit and the voltage supplied by the battery.
So, the current flowing through the circuit when the switch is closed will be I = 10V/30 ohms = 1/3 A (0.333 A). This same current of 1/3 A will flow through the 20 ohm resistor as well, as there is only one path for the current to flow through the circuit.
To know more about Ohm's law, here
brainly.com/question/12372387
#SPJ4
Mattie wanted to measure the speed of sound through different materials. Mattie planned to use the table shown to record data.
Speed of Sound Through
Different Materials
Material Speed of Sound
Block of aluminum
Balloon filled with air
Tank filled with water
Tank filled with oil
Through which material will Mattie most likely find that sound travels the fastest?
Through the block of aluminum material, Mattie will most likely find that sound travels the fastest.
The correct answer is block of aluminum.
The speed of sound in a medium refers to the rate at which sound waves propagate through the medium. When you bang a drum, the sound waves produced move through the air until they reach your ears, allowing you to hear the sound.
The speed of sound varies depending on the medium through which it passes. In solids and liquids, sound travels faster than in gases.
Mattie wants to measure the speed of sound through different materials, and she planned to use the table shown to record data. The table below shows the speed of sound through different materials. Material Speed of Sound Block of aluminum 6,000 m/s Balloon filled with air 340 m/s Tank filled with water 1,500 m/s Tank filled with oil 1,200 m/s
Therefore, through the block of aluminum material, Mattie will most likely find that sound travels the fastest.
For more such questions on sound, click on:
https://brainly.com/question/27951129
#SPJ11
two train tracks are going in opposite directions leave at the same time. one train travels 80km/hr and the other travels 70km/hour. how long after they leave will they me 50km apart
Answer:
20 min
Explanation:
let the time taken be t
s = distance by train 1 + distance by train 2
s= 50 km
by the second equation of motion,
[tex]s=\frac{1}{2} at^2+ut[/tex]
a in both trains is zero.
so,
50= 80t + 70t
50= 150t
t= 1/3 hr = 20 min
The first equation of motion: v = u + at
Second equation of motion: s = ut + 12 at2
Third equation of motion: v2 = u2 + 2as
where,
s = displacement
u = initial velocity
v = final velocity
a = acceleration
t = time of motion
To know more about motion:
https://brainly.com/question/25951773
The two trains will be 50km apart after 1/3 of an hour, which is equivalent to 20 minutes.
Two train tracks are going in opposite directions leave at the same time. One train travels 80km/hr and the other travels 70km/hour.
When two train tracks are going in opposite directions and leave at the same time, they are moving apart from each other. In this case, one train is moving at 80 km/hour, and the other is moving at 70 km/hour. Therefore, the relative speed of the two trains is 80 km/hour + 70 km/hour = 150 km/hour.
To determine the time it takes for the trains to be 50 km apart, we use the formula:
d = rt
Where, d = distance, r = rate (speed), and t = time
So, 50 = 150t (since the distance is 50 km and the relative speed is 150 km/hour). Solving for t, we get:
[tex]t = \frac{50}{150} = \frac{1}{3}[/tex] hours = 20 minutes.
Therefore, the two trains will be 50 km apart after 20 minutes of leaving.
To know more about relative speed
brainly.com/question/16284701
#SPJ11
suppose a constant force is the only force applied to an object of unknown mass. what quantities do we need to know in order to find the object's change in momentum?
Change in momentum can be calculated by knowing values including the magnitude of force, amount of time, and object's starting velocity.
With a constant force, we can calculate the change in momentum of an object by knowing the following values:
the magnitude of the force being exerted on the item.the amount of time that an item is subjected to a force.the object's starting velocity, if any.If we know these numbers, we can apply the following formula to determine the object's change in momentum:
Δp = FΔt
Where Δp is the change in momentum, F is the magnitude of the force, and Δt is the time duration for which the force is applied to the object.
Note that if the object is initially at rest, then the initial momentum of the object is zero, and we can simplify the formula to:
Δp = mv
where m is the mass of the object, and v is the final velocity of the object after the force has been applied for time Δt.
To learn more about momentum, refer to:
https://brainly.com/question/1042017
#SPJ4
jupiter mass planets that are found close to their parent stars are called: group of answer choices super-earths hot jupiters goldilocks planets cold jupiters
Jupiter mass planets that are found close to their parent stars are called Hot Jupiters. These are a type of exoplanet, or a planet that orbits a star outside of our solar system. Hot Jupiters are characterized by their large mass, similar to Jupiter, and their close proximity to their host stars, which results in high temperatures.
In comparison to the other options:
1. Super-Earths are planets with a mass greater than Earth's but smaller than Uranus or Neptune. They can be found in various distances from their stars and do not necessarily have Jupiter-like masses.
2. Goldilocks planets, also known as habitable zone planets, are exoplanets that orbit their stars in a range where conditions might be suitable for life as we know it, with temperatures allowing for the presence of liquid water. These planets can be of various sizes and masses, not specifically Jupiter-sized.
3. Cold Jupiters are gas giants that orbit their stars at a greater distance, similar to how Jupiter orbits our Sun. They have lower temperatures due to their distance from their host stars.
To Learn More About Jupiters
https://brainly.com/question/30192826
#SPJ11
A 0.155 kg arrow is shot from
ground level, upward at 31.4 m/s.
What is its potential energy (PE)
when it is 30.0 m above the
ground?
The potential energy of the arrow when it is 30.0 m above the ground is 45.57 J.
What is the potential energy (PE) of the arrow when it is 30.0 m above the ground?The potential energy (PE) of an object at a height h is given by the formula:
PE = mgh
Where m is the mass of the object, g is the acceleration due to gravity ( 9.8m/s²), and h is the height.
Given that:
m = 0.155 kg
v = 31.4 m/s
h = 30.0 m
g = 9.81 m/s² (acceleration due to gravity)
Use the formula for potential energy to find the potential energy of the arrow at a height of 30.0 m:
PE = mgh
PE = 0.155 × 9.8 × 30.0
PE = 45.57 J
Therefore, the potential energy of the arrow is 45.57 J.
Learn more about kinetic energy here: https://brainly.com/question/27397088
#SPJ1
with what minimum speed must you toss a 150 g ball straight up to just touch the 14- m -high roof of the gymnasium if you release the ball 1.7 m above the ground? solve this problem using energy.
The minimum speed required to toss the ball straight up to just touch the roof of the gymnasium is 6.35 m/s.
To calculate the minimum speed required to toss a 150 g ball straight up to just touch the 14 m high roof of the gymnasium, we can use energy conservation. The potential energy of the ball when it is at the release point is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the release point above the ground. At the release point, the ball has zero kinetic energy.
When the ball just touches the roof, its potential energy is zero, and all its initial potential energy has been converted into kinetic energy. The kinetic energy of the ball can be expressed as (1/2)mv^2, where v is the velocity of the ball at the point of contact with the roof.
Therefore, we can write the equation: mgh = (1/2)mv²
Rearranging the equation, we get: v = sqrt(2gh)
Substituting the given values, we get: v = sqrt(2 x 9.81 m/s^2 x (14 m - 1.7 m)) = 6.35 m/s
To know more about minimum speed, here
brainly.com/question/9426822
#SPJ4
According to the Nebular Theory, the Sun's gravity caused...
*
the number of planets in our solar system to be limited to 10
Jupiter to have a total of 49 moons
the arrangement of the planets to be terrestrial inside the asteroid belt and jovian outside the asteroid belt
orbits of the outer 4 planets to be faster than the orbits of the inner 4 planets
a ball is attached to the end of a string. it is swung in a vertical circle of radius 1.33 m. what is the minimum velocity that the ball must have to make it around the circle?.
Answer:
v = 3.61210464965 m/s
Explanation:
∑F = ma
Centripetal acceleration is mv^2/r and the ball is under a force of gravity
[tex]F=ma\\\\mg = \frac{mv^2}{r}\\\\v=\sqrt{gr} \\\\v=\sqrt{(9.81m/s^2)(1.33m)} \\\\v=3.61210464965m/s[/tex]
The minimum velocity that the ball must have to make it around the vertical circle is 3.66 m/s.
When the ball is swung in a vertical circle, there are two forces acting on the ball, which are the gravitational force and the tension force in the string. When the velocity of the ball is minimum, the gravitational force will be equal to the tension force in the string.
The centripetal force is also equal to the gravitational force. This can be expressed mathematically as:
[tex]\frac{mv^2}{R} = mg + T[/tex]
Where m is the mass of the ball, v is its velocity, R is the radius of the vertical circle, g is the acceleration due to gravity, and T is the tension force in the string. Rearranging the formula gives:
[tex]v^2 = Rg + R*(\frac{T}{m})[/tex]
We can see that the minimum velocity of the ball is achieved when T is minimum. At the top of the circle, T is minimum, which means:
[tex]v^2 = Rg[/tex]
So, [tex]v = \sqrt{(Rg)} = \sqt{(1.33 * 9.81)} = 3.66[/tex] m/s
Therefore, the minimum velocity that the ball must have to make it around the vertical circle is 3.66 m/s.
To know more about centripetal force
brainly.com/question/14249440
#SPJ11
a magnetic field increases from 0 to 0.37 t in 1.5 s . part a how many turns of wire are needed in a circular coil 13 cm in diameter to produce an induced emf of 7.5 v ?
A magnetic field increases from 0 to 0.37 t in 1.5 s . 2917 turns of wire are needed in a circular coil 13 cm in diameter to produce an induced emf of 7.5 v
To find the number of turns of wire needed in the circular coil, we'll use Faraday's law of electromagnetic induction:
emf = -N x (ΔB x A) / Δt
Where emf is the induced electromotive force (7.5 V), N is the number of turns of wire, ΔB is the change in magnetic field (0.37 T), A is the area of the circular coil, and Δt is the time taken (1.5 s).
First, let's find the area of the circular coil:
A = π x [tex](d/2)^2[/tex]
A = π x [tex](0.13 \:m / 2)^2[/tex]
A ≈ 0.0132 m²
Now, we'll rearrange Faraday's law equation to solve for N:
N = -emf x Δt / (ΔB x A)
N = -7.5 V x 1.5 s / (0.37 T x 0.0132 m²)
N ≈ -14.25 / 0.004884
N ≈ 2916.57
Since the number of turns of wire must be a whole number, we can round it up to the nearest whole number:
N ≈ 2917 turns
For similar question on turns of wire
https://brainly.com/question/16744082
#SPJ11
a nearsighted person has her vision corrected using a 2.75-diopter contact lens. contact lenses are placed on the eyeball so the distance from the eye to the object (or image) is the same as the distance from the lens to that object (or image). what is her near point using this lens? question 1 options: 40 cm 20 cm 80 cm 100 cm
The near point of this person's vision is approximately 36.36 cm. So the near point will be option 40 cm.
If we have to find the near point of a person's vision, we need the closest distance at which an object can be brought into focus on the retina.
Here about this case, a nearsighted person has her vision corrected using a 2.75-diopter contact lens. This means that the image is shifted forward and brought into focus on the retina.
The formula for near point of an eye is:
Near point = 1/f
where f is the power of the lens in diopters.
So, the near point of the nearsighted person with the 2.75-diopter contact lens is:
Near point = 1/2.75
Near point = 0.3636 meters = 36.36 cm
Therefore, the near point of the person's vision is approximately 36.36 cm, which is closest to the option 40 cm.
Learn more about near point:
https://brainly.com/question/13095884
#SPJ4
a leading model of galactic recycling holds that gas is blown high above the disk of the galaxy by supernovae and eventually cools and rains back down into the disk. this model is called
The leading model of galactic recycling that involves gas being blown high above the disk of the galaxy by supernovae and eventually cooling and raining back down into the disk is called the galactic fountain model.
The galactic fountain model describes a cycle in which gas in the disk of a galaxy is heated and ejected by supernovae explosions, which create a hot, low-density gas that rises above the disk. Over time, this gas cools and falls back towards the disk, where it can be used to form new stars and fuel ongoing star formation.
This process is thought to play a key role in regulating the rate of star formation in galaxies, as well as in determining the chemical composition of the interstellar medium. The galactic fountain model has been supported by observations of gas kinematics and chemical abundances in the Milky Way and other galaxies. It is an important framework for understanding the complex interplay between stellar evolution, gas dynamics, and galaxy formation and evolution.
To know more about the Galaxy, here
https://brainly.com/question/13250140
#SPJ4
If a truck with a frequency of 85.0 Hz is traveling toward an observer with a speed of 27.0 m/s, what frequency does the observer hear as the truck approaches?
when a transparency sheet is rubbed with a tissue and the transparency and tissue are then held at rest a short distance apart, group of answer choices the two objects exert magnetic forces on each other, because electrons are rubbed off of one and onto the other. the two objects exert electric forces on each other, because the electron orbits in the two objects are all put into the same alignment. the transparency and the tissue exert magnetic forces on each other, because the electron orbits in the two objects are all put into the same alignment. a spark will jump between them, because the rubbing causes electrons to jump from one object to the other. the two objects exert electric forces on each other, because electrons are rubbed off of one and onto the other.
When a transparency sheet is rubbed with a tissue and the transparency and tissue are then held at rest a short distance apart the two objects exert electric forces on each other because electrons are rubbed off of one and onto the other. The correct option is "the two objects exert electric forces on each other, because electrons are rubbed off of one and onto the other."
When a transparency sheet is rubbed with a tissue, the two objects develop electric charges. The tissue becomes negatively charged as a result of this rubbing because electrons are transferred from the transparency sheet to the tissue.
As a result, the transparency sheet becomes positively charged. These charges create electric forces that cause the two objects to be attracted to one other.
As a result, they exert electric forces on each other. Therefore, the most appropriate answer to the given question is that the two objects exert electric forces on each other because electrons are rubbed off of one and onto the other.
For more such questions on electric force, click on:
https://brainly.com/question/25923373
#SPJ11
during the scientific revolution, astronomer and mathematician nicolaus copernicus' book on the revolutions of the heavenly spheres would have directly challenged the ideas in what previous book?
During the Scientific Revolution, astronomer and mathematician Nicolaus Copernicus' book "On the Revolutions of the Heavenly Spheres" directly challenged the ideas in the book "Almagest" by Claudius Ptolemy.
In the scientific revolution, Nicolaus Copernicus' book on the revolutions of the heavenly spheres would have directly challenged the ideas in the previous book which was Ptolemy's Almagest.
Copernicus challenged the geocentric model of the universe, which was the dominant view at the time, and replaced it with the heliocentric model, which stated that the sun, rather than the earth, was the center of the universe.
This directly challenged the ideas put forth in Ptolemy's Almagest, which had been the standard text on astronomy for over a thousand years.
For more such questions on Scientific Revolution, click on:
https://brainly.com/question/16918035
#SPJ11
a mass-spring system oscillates with a period of 2.2 s. what would be the period of the system if the mass and the spring constant were both increased by a factor of four? a. the period would decrease by half b. the period would remain the same c. the period would be multiplied by the square root of two d. the period would double
A mass-spring system oscillates with a period of 2.2 s. If both the mass and the spring constant are increased by a factor of four, the period of the system will remain the same. Here option B is the correct answer.
The period of a mass-spring system is given by:
T = 2π √(m/k)
where T is the period, m is the mass of the object attached to the spring, and k is the spring constant.
If both the mass and spring constant is increased by a factor of four, the new period can be calculated as:
T' = 2π √(4m/4k) = 2π √(m/k)
Since the mass and spring constant are increased by the same factor, their ratio remains the same, and the expression simplifies to the original equation for the period.
Therefore, the period of the system would remain the same if both the mass and spring constant were increased by a factor of four.
This result can be understood intuitively by considering that increasing the mass would increase the inertia of the system while increasing the spring constant would increase the force required to move the mass. These effects would cancel out and result in the same period of oscillation.
To learn more about spring constant
https://brainly.com/question/20388857
#SPJ4
a student is making a cup of hot chocolate. they want to add hot chocolate mix to water to make a 60% solution of hot chocolate. If they have 100 units of water, how many units of hot chocolate mix is there?
The student needs to add 150 units of hot chocolate mix to 100 units of water to make a 60% solution of hot chocolate.
What is Solution?
Solutions can be made of different states of matter such as gases, liquids, and solids. The concentration of the solute in a solution can be expressed in different ways, including mass percentage, mole fraction, and molarity.
Let x be the number of units of hot chocolate mix needed to make a 60% solution.
We know that the final volume of the solution will be 100 + x units.
Since the solution is 60% hot chocolate mix, we can set up the following equation:
x / (100 + x) = 0.6
Multiplying both sides by (100 + x), we get:
x = 0.6 (100 + x)
Distributing the 0.6, we get:
x = 60 + 0.6x
Subtracting 0.6x from both sides, we get:
0.4x = 60
Dividing both sides by 0.4, we get:
x = 150
Learn more about Solution from given link
https://brainly.com/question/25326161
#SPJ1
does the upper loop have a clockwise current (from above), a counterclockwise current, or no current before the switch is closed?
The current in the upper loop can be identified as a clockwise current from above (i.e., clockwise) before the switch is closed. This statement is justified using the Fleming’s right-hand rule.
Fleming's right-hand rule is a method to determine the direction of the force acting on a current-carrying conductor in a magnetic field.
The direction of the force on the conductor is given by the thumb of the right hand, the direction of the current in the conductor is given by the first finger, and the direction of the magnetic field is given by the second finger.
To determine the current direction, we must establish the polarity of the battery, as shown in the image below, and the polarity of the induced electromotive force (emf).
We must ensure that the magnetic field and the induced emf in the coil are both pointing downwards, as shown in the image below. We can now use the Fleming's right-hand rule to determine the direction of the current in the upper loop, which is clockwise from above.
For more such questions on current, click on:
https://brainly.com/question/22971286
#SPJ11
Does anyone know this???
The wavelength of the wave of speed 35 m/s is 1.75 m.
What is wavelength?Wavelength is the distance taken by a wave to cover one complete cycle.
To calculate the wavelength of the wave, we use the formula below
Formula:
λ = v/f......................... Equation 1Where:
λ = Wavelength of the wavev = Velocity of the wavef = Frequency of the waveFrom the question,
Given:
v = 35 m/sf = 20 HzSubstitute these values into equation 1
λ = 35/20λ = 1.75 mHence, the wavelength of the wave is 1.75 m.
Learn more about wavelength here: https://brainly.com/question/28995449
#SPJ1
Waves Problem set *use units*
1.A tall, thin tree sways back and forth in the breeze with a frequency of 58.0 Hz. What is the period of the tree?
2.A periodic transverse wave that has a frequency of 24.9 Hz, travels along a string. The distance between the crest and the adjacent trough is 3.4 m. What is its wavelength?
3.What is the speed of a sound wave that has a frequency of 285 Hz and a wavelength of 1.5 m?
4.A person yells across a canyon and hears the echo 5.5 seconds later. If the speed of sound is 336.0 m/s, how far away is the other side of the canyon?
5.Radio station WKLB in Boston broadcasts at a frequency of 97.1 kHz. What is the wavelength of the radio waves emitted by WKLB? ( Radio waves travel at the speed of light 3x108 m/s) ps. no decimals
6. Water waves at a lake cross a distance of 7 m in 3.9 s. The period of oscillation is 3 s. What is the speed of the water waves?
7.Water waves at a lake cross a distance of 9 m in 2.9 s. The period of oscillation is 3.1 s. What is the wavelength of the water waves?
8.One pulse is generated every 0.84 s in a tank of water. What is the frequency of the pulses?
9. One pulse is generated every 0.95 s in a tank of water. What is the speed of propagation of the wave if the wavelength of the surface wave is 1.9 cm?
10.Dog whistles are inaudible to humans because dogs can hear at much higher frequencies than humans are capable of detecting. If a dog whistle has a wavelength of 2.3 x 10-3 m, what is the frequency of sound emitted? *Sound travels at 340 m/s.
11. What is the speed of sound in air that has a temperature of 29.2 o C?
12. What is the wavelength of sound in air that has a temperature of 7.9 o C has a frequency of 40.7 Hz?
To solve problems involving waves, it's important to know the relationships between frequency, wavelength, and speed, which are given by the formulas v = f λ and T = 1/f, where v is the speed of the wave, f is the frequency, λ is the wavelength, and T is the period of oscillation.
The period of the tree is T=1/f= 1/58.0 Hz = 0.0172 s.
The wavelength of the wave is λ = 2 (crest to trough distance) = 2 (3.4 m) = 6.8 m.
The speed of the sound wave is v = f λ = (285 Hz) (1.5 m) = 427.5 m/s.
The distance to the other side of the canyon is d = (speed of sound) × (time for echo to return) / 2 = (336.0 m/s) × (5.5 s) / 2 = 924 m.
The wavelength of the radio waves emitted by WKLB is λ = c / f = 3 x 10^8 m/s / 97.1 x 10^3 Hz = 3.09 m.
The speed of the water waves is v = λ / T = (7 m) / (3 s) = 2.33 m/s.
The wavelength of the water waves is λ = v T = (2.9 s) (2.33 m/s) = 6.74 m.
The frequency of the pulses is f = 1/T = 1/0.84 s = 1.19 Hz.
The speed of the wave is v = λ / T = (1.9 cm) / (0.95 s) = 2 cm/s.
The frequency of the sound wave is f = v / λ = 340 m/s / 2.3 x 10^-3 m = 1.48 x 10^5 Hz.
The speed of sound in air at 29.2°C is v = 331 m/s + (0.6 m/s/°C) × (29.2°C) = 349.5 m/s.
The wavelength of the sound wave is λ = v / f = (331 m/s + (0.6 m/s/°C) × (7.9°C)) / (40.7 Hz) = 8.06 m.
Learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ1
2. An olympic diver dives (no jumping) off a 10m high springboard, into the water below. Once
the diver hits the water, their velocity decreases uniformly and they come to a stop 1.5
seconds after they enter the water. How deep was the diver when they came to a stop?
What was the rate of acceleration in the water?
The diver was 10.425m deep when they came to a stop and the rate of acceleration in the water was [tex]-9.4m/s^2[/tex].
Given the height of springboard from water (h) = 10m
Time after which the diver comes to a stop = 1.5s
Let the depth the diver reached in water = d
The final velocity after he reaches the depth (v) = 0m/s
Lett the speed of diver after free fall until he reaches water = um/s
According to Newtons laws of motion we know that [tex]v^2 - u^2 = 2gh[/tex]where g is the acceleration due to gravity = [tex]9.8m/s^2[/tex] then:
[tex]0^2 - u^2 = 2*(-9.8)*(10)[/tex]
[tex]u^2 = 196 \\u = \sqrt{196} = 14m/s[/tex]
The initial velocity with which the diver reaches water surface = 14m/s
The rate of acceleration in the water can be calculated using the equation:
a = (Vf - Vi) / t where Vf is the final velocity, Vi is the initial velocity, and t is the time it takes for the diver to come to a stop.
[tex]a = (0 - 14)/1.5 = -9.4 m/s^2[/tex]
Then the distance the diver travelled in water before coming to rest is calculated as below:
[tex]s = ut + 1/2at^2[/tex] then:
[tex]d = 14 * 1.5 - 1/2 * (-9.4) * 1.5 * 1.5[/tex]
d = 21 - 10.575 = 10.425m
Therefore, the depth of the diver when they came to a stop was 10.425m
To learn more about acceleration click here https://brainly.com/question/12550364
#SPJ1
bubba is driving along at a speed of 23.1 m/s. he has a barrel of feed in the back of his truck. the barrel is not secured in any way. the coefficient of static friction between the barrel and the bed of the truck is 0.296. the road near bubba's farm curves. what is the sharpest radius of curvature turn that bubba can drive at this speed before the barrel of feel starts to slide in the bed of the truck?
The sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck is approximately 183.8 meters.
To find the sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck, we need to use the following formula:
f_s ≤ m * a / N
where f_s is the coefficient of static friction (0.296), m is the mass of the barrel, a is the centripetal acceleration, and N is the normal force. Since the barrel is not accelerating vertically, the normal force (N) equals the gravitational force (mg). The centripetal acceleration (a) can be calculated using the formula:
a = v^2 / r
where v is the speed (23.1 m/s) and r is the radius of curvature. Now, we can plug these equations into the inequality:
0.296 ≤ (23.1^2) / (r * g)
where g is the gravitational acceleration (9.81 m/s²). We need to solve for r:
0.296 * r * 9.81 ≤ 23.1^2
2.90176 * r ≤ 533.61
r ≥ 533.61 / 2.90176
r ≥ 183.8 m
The sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck is approximately 183.8 meters.
For more such questions on radius of curvature , Visit:
https://brainly.com/question/29595940
#SPJ11
How to complete ??? Thankssss
1 - Incident ray
2 - Refracted ray
3 - Angle of incidence
4 - Angle of refraction
Describe refraction.The bending of light as it travels through a medium with a varied refractive index is known as refraction. The speed of light changes as it moves from one medium, like air, to another, like water or glass. This causes the light to bend or change direction.
The angle at which the light strikes the interface between the two media and the disparity in refractive indices between the two media determine how much bending takes place. Total internal reflection is a phenomena where all of the light is completely reflected back into the original medium if the angle of incidence is large enough.
Learn more about refraction:brainly.com/question/14760207
#SPJ1
how does quantum mechanics differ from classical mechanics in the way a state of a physical system is mathematically represented? why is this conceptually significant?
Quantum mechanics uses a mathematical structure called a wave function to describe the state of a system, while classical mechanics use a set of variables, such as position and momentum.
This is how quantum mechanics differs from classical mechanics in the way the state of a physical system is represented mathematically. Instead of describing the exact state of a particle, the wave function explains the probability of finding a particle in a given state.
The principle of superposition states that particles have no apparent state until they are detected, which alludes to its theoretical importance. It affects how we perceive the fabric of reality and how small entities behave.
Learn more about quantum mechanics at
https://brainly.com/question/11855107
#SPJ4
if it gains sufficient mass from a binary companion, a white dwarf can become a if it gains sufficient mass from a binary companion, a white dwarf can become a brown dwarf. type i supernova. black dwarf. planetary nebula. type ii supernova.
If a white dwarf gains sufficient mass , it can undergo a type I supernova. This occurs when the white dwarf reaches Chandrasekhar limit, which is approximately 1.4 times mass of the Sun.
If a white dwarf does not gain sufficient mass to undergo a type I supernova, it will eventually cool down and become a black dwarf. A brown dwarf is a failed star that is not massive enough to undergo nuclear fusion in its core, and so it emits very little light or heat.
A type II supernova occurs when a massive star runs out of fuel and its core collapses, leading to a catastrophic explosion. This is distinct from a type I supernova, which involves a white dwarf.
To know more about catastrophic explosion, here
brainly.com/question/24321216
#SPJ4
the velocity of waves on a string is 89 m/s . part a if the frequency of standing waves is 470 hz , how far apart are two adjacent nodes?
The distance between two adjacent nodes of the standing wave is approximately 0.0947 m.
The distance between two adjacent nodes of a standing wave on a string can be calculated using the formula:
d = λ/2
where d is the distance between two adjacent nodes, and λ is the wavelength of the wave.
We can calculate the wavelength of the wave using the formula:
v = f λ
where v is the velocity of the wave, f is the frequency of the wave, and λ is the wavelength of the wave.
Substituting the given values, we get:
λ = v/f
λ = 89 m/s / 470 Hz
λ = 0.1894 m
Now, we can calculate the distance between two adjacent nodes as:
d = λ/2
d = 0.1894 m / 2
d = 0.0947 m
Therefore, the distance between two adjacent nodes of the standing wave is approximately 0.0947 m.
For such more question on standing wave:
https://brainly.com/question/2292466
#SPJ11