The characteristics of glaciers and glacial areas are B. glaciers flow, C. glaciers form where snow and ice accumulate faster than they melt, D. glaciers may fracture, forming crevasses, and E. glaciers usually are clear ice with very little sediment in them.
Some characteristics of glaciers and glacial areas include:
Glaciers flow: Glaciers are large masses of ice that flow under the influence of gravity. This movement is due to the weight of the ice and the pressure from the overlying ice layers. The flow of glaciers is a slow process that can range from a few centimeters to several meters per day.
Glaciers form where snow and ice accumulate faster than they melt: Glaciers form in regions where the rate of snowfall and ice accumulation is greater than the rate of melting and sublimation. This typically occurs in cold environments, such as high mountains and polar regions.
Glaciers may fracture, forming crevasses: As glaciers flow, the ice may crack and form deep fissures called crevasses. These fractures are a result of the stresses and strains within the glacier as it moves over uneven terrain. Crevasses can be extremely dangerous for those traversing glacial areas.
Glaciers usually are clear ice with very little sediment in them: Although glaciers may appear to be made of white ice, the ice in a glacier is typically very clear and pure. However, glaciers can pick up and transport sediment as they flow, leading to bands or layers of sediment within the ice. This sediment can become visible when the glacier melts, leaving behind deposits called moraines. Therefore, the correct option is B, C, D, and E.
The question was incomplete, Find the full content below:
what are some characteristics of glaciers and glacial areas? multiple select question.
A. glacial areas do not get eroded by glacial ice.
B. glaciers flow.
C. glaciers form where snow and ice accumulate faster than they melt.
D. glaciers may fracture, forming crevasses.
E. glaciers usually are clear ice with very little sediment in them.
Know more about Glaciers here:
https://brainly.com/question/2142179
#SPJ11
8) Which of the following is NOT a characteristic of a steppe?
A) grasslands
B) deserts
C) mostly mid-latitudes
D) no trees
Answer: B) deserts
Explanation:
They do not have trees, are grasslands, and have mostly mid-latitudes. They can not however be considered a dessert because it is not "dry enough"
1. what is the elevation of midnight peak
2. what is the elevation of brushy butte
3. what is the elevation of point A
4. what is the elevation of point B
The elevation of midnight Peak is 991 to 999m.
The elevation of Brushy Butte is 1021-1029m.
The elevation of Point A is 875m
The elevation of Point B is 960m.
What is elevation?Elevation refers to the height or altitude of a location above a reference point, usually sea level. It is a measurement of how high a particular point is above or below the surrounding terrain. Elevation is often used in geography, geology, and cartography to describe the physical features of a landscape.
It can also be an important factor in weather patterns and the distribution of plant and animal species. Elevation is typically measured using surveying equipment or satellite technology, and is expressed in units such as meters or feet above sea level.
Learn more about elevation on
https://brainly.com/question/29028802
#SPJ1
The interaction of gravity and the moon's inertia keeps the moon in orbit around Earth. What do the three arrows represent in the figure of Earth and the moon? Enter the correct label for each arrow in the diagram.
The three arrows in the illustration of the Earth and Moon stand for the gravitational pull of the Earth on the Moon, the centripetal force acting on the Moon, and the inertia of the Moon.
How much centripetal force exists between Earth and the moon?Centripetal force is responsible for the moon's nearly round orbit around the Earth. The centripetal force in this instance is gravity. Newton's Universal Law of Gravitation governs this force.
What does the centripetal force on the moon represent?The centripetal force required to keep planets in orbit around the Sun and all kinds of satellites in orbit around the Earth is provided by gravitational attraction. The Moon continues to orbit the Earth because to gravity. The velocity of the Moon is continuously shifting in one direction.
To know more about Earth visit:-
https://brainly.com/question/12041467
#SPJ1
sediment transported by most rivers tends to become as it is carried downstream. group of answer choices coarser finer less sorted more angular
Answer:
Sediment transported by most rivers tends to become finer as it is carried downstream. This is because the turbulence and energy of the water decreases as it moves further away from its source, causing larger particles to settle out first and smaller particles to remain suspended. Additionally, the constant abrasion of particles against each other during transport can also wear them down into smaller fragments. The other options listed (less sorted, more angular, coarser) may or may not be affected by transportation distance and are dependent on other factors such as the nature of the source material and the type of river environment.
Sediment transported by most rivers tends to become finer as it is carried downstream.
Sediment transported by most rivers tends to become finer as it is carried downstream. What is sediment? Sediment refers to solid materials that are transported and deposited by water, wind, and ice. Sand, silt, clay, gravel, and other rocks are examples of sediment transported by most rivers. The deposition of sediment is usually determined by the size of the particles it contains. The deposition of sediment depends on the velocity of the water carrying it. The coarser materials settle first as the current slows, while the finer particles stay in suspension longer before settling. The transportation of sediment by most rivers usually results in the sediment becoming finer as it travels downstream. The coarsest rocks, boulders, and gravel are carried for shorter distances. These deposits are deposited at the beginning of the river's course, where the water flows most rapidly. As the velocity of the river slows down, it transports smaller particles, such as pebbles and sand. The particles continue to get smaller and finer until the river reaches the ocean. The sediments carried by the rivers contribute to the formation of deltas and beaches.
Visit here to learn more about Sediment transported:
https://brainly.com/question/29663486
#SPJ11
recycling used electronics instead of dumping them in a landfill would be likely to impact all the following except: a.land use b.ozone layer depletion c.water runoff d.waste management
Recycling used electronics instead of dumping them in a landfill would be unlikely to impact the ozone layer depletion. The ozone layer depletion is primarily caused by the release of chlorofluorocarbons (CFCs) and other ozone-depleting substances into the atmosphere.
Electronics do not contain these substances and thus are not a direct cause of ozone layer depletion. However, electronics contain other hazardous substances such as lead, mercury, and cadmium, which can contaminate soil and water if not properly disposed of.
By recycling electronics, these hazardous substances can be safely removed and disposed of, reducing the impact on land use, water runoff, and waste management.
The recycling of used electronics has numerous environmental benefits, such as reducing energy usage, conserving resources, and reducing greenhouse gas emissions, among others.However, recycling used electronics has no effect on the ozone layer.
The depletion of the ozone layer is caused by the use of ozone-depleting substances such as chlorofluorocarbons (CFCs) and halons, which are commonly used in refrigeration and air conditioning systems, as well as fire suppression systems.
Recycling used electronics has no effect on the use of these substances and thus cannot impact the depletion of the ozone layer.
For more question on chlorofluorocarbons
https://brainly.com/question/15737835
#SPJ11
What is sustainable architecture?
Answer: the practice of creating buildings that make as little impact on the natural world as possible
Explanation: it promotes the health of the building's occupants at the same time as reducing the negative effects of the construction process on the environment
4. Which of the following nations is a source of modern-day pirates?
Uganda
Egypt
Kenya
Somalia
PLS HELP ME! I HAVE TO FINISH 10 ASSIGNMENTS BY THE END OF THE DAY!
Answer:
The answer of this question is Somalia. The answer is confirmed. hope it was helpful.
Length A4 page 4 page pages 4 page pages lines 1 A4 1 A4 ages THE DEVELOPMENT AND IMPACT OF TROPICAL CYCLONES Guidelines for discussion Choose ONE of the following Tropical Cyclones. . Eloise Freddy The desktop research must centre around ONE of the above Tropical cyclones. ● Mapping Hagibis Nivar Ingrid Florence . Find a world map, that indicate the regions where tropical cyclones develop. • Plot the following Tropical cyclones next to the region where they originated on the world map. (Hagibis, Nivar, Ingrid, Florence, Eloise and Freddy) Satellite image of the specific tropical cyclone under research. Map indicating the path of the tropical cyclone under research. Discuss the path of the tropical cyclone under research. Draw an annotated cross-section of a tropical cyclone in its mature stage. Indicate the following. . ● RESEARCH TO Air movement . Cumulonimbus and cumulus clouds High pressure and Low pressure Eye Eye wall ● ● • Introduction Introduce the tropical cyclone. Use the Sapphire-Simpson and Beaufort scales to indicate the strength of the tropical cyclone. • Provide information about the Sapphire-Simpson and Beaufort scales. Paragraph 1 • Why do tropical cyclones develop in late summer? What is the impact of Coriolis force and latent heat on the development of tropical cyclones. Discuss the stages of development of the tropical cyclone under research. Why can category 5 tropical cyclones be more destructive (damaging) than category 1 tropical cyclones.
1. Often, the tropical cyclones typically develop in late summer because of the favorable conditions that exist during this time of year.
2. Coriolis force and latent heat create the ideal conditions for tropical cyclones to form and thrive, making them one of the most powerful and destructive weather phenomena on Earth.
Why do tropical cyclones develop in late summer?These favorable conditions include warm ocean temperatures, high humidity, and low wind shear, which allow the storm to gain strength and develop into a cyclone. In addition, late summer is typically the peak of hurricane season in many parts of the world, which increases the likelihood of tropical cyclone formation.
What is the impact of Coriolis force and latent heat on the development of tropical cyclones?The Coriolis force and latent heat are two key factors that contribute to the development of tropical cyclones. The Coriolis force is a result of the Earth's rotation and causes the air to rotate around a low-pressure center in a cyclonic fashion. This force is essential for the development of the tropical cyclone's characteristic circular motion.
Latent heat, on the other hand, is released when water vapor in the air condenses into liquid droplets, which generates energy and drives the storm's circulation. As the warm, moist air rises and cools, it releases this latent heat, which fuels the storm's development and intensification.
Read more about tropical cyclones
brainly.com/question/1222463
#SPJ1
which statement describes or follows from the concept of sustainability?which statement describes or follows from the concept of sustainability?sustainability means that we regenerate degraded ecosystems.human population must decline for the foreseeable future to maintain earth's natural resources.an example of sustainable use is that the forests that we have today will be preserved and not used for human consumption.an example of sustainable use is that water extracted from underground resources must be equal to or less than the water that recharges the underground resources.
Option C is correct, Water drawn from subterranean resources must equal or be less than the water that recharges the underground resources as the statement describes or follows from the concept of sustainability.
This is an illustration of sustainable use, which exemplifies or derives from the idea of sustainability. This is due to the fact that sustainability is the ability to keep or protect natural resources over an extended period of time for the advantage of future generations.
We can guarantee that the underground resources stay viable and are not exhausted by making sure that the rate of water extraction is equivalent to or lower than the rate of recharge.
To guarantee the long-term survival of other natural resources, such as wood, fishing, and mineral resources, this concept of sustainable use can also be applied to them.
Learn more about the concept of sustainability at
https://brainly.com/question/9116837
#SPJ4
The question is -
Which statement describes or follows the concept of sustainability?
A) Human population must decline for the foreseeable future to maintain Earth's natural resources.
B) Sustainability means that we regenerate degraded ecosystems.
C) An example of sustainable use is that water extracted from underground resources must be equal to or less than the water that recharges the underground resources.
D) An example of sustainable use is that the forests that we have today will be preserved and not used for human consumption.
to decrease air pollution created from sulfur emissions, your local power plant wishes to build taller smokestacks. this would most likely cause
The ultimate consequence of this would most likely be D) to create an environmental problem at a distance from the power plant.
Building taller smokestacks at the local power plant can help reduce the concentration of sulfur emissions near the ground, thus decreasing the immediate air pollution in the surrounding area. However, this does not necessarily mean that the overall environmental impact of the emissions is reduced. Instead, the taller smokestacks can disperse the pollutants over a larger area, which may result in environmental problems at a greater distance from the power plant.
The reason behind this is that the taller smokestacks allow the sulfur emissions to be released higher up in the atmosphere. While this may dilute the concentration of pollutants near the power plant, it also allows the emissions to travel further and affect a larger area. This can lead to various environmental issues such as acid rain, which occurs when sulfur dioxide reacts with water vapor in the atmosphere to form sulfuric acid. Acid rain can harm vegetation, aquatic ecosystems, and even human health.
In conclusion, building taller smokestacks to decrease air pollution from sulfur emissions may have the unintended consequence of creating environmental problems at a distance from the power plant. It is essential to explore alternative methods of reducing sulfur emissions, such as implementing cleaner technologies or shifting towards more sustainable energy sources, in order to minimize the environmental impact of power plants. Therefore, the correct option is D).
The question was incomplete, Find the full content below:
To decrease air pollution created from sulfur emissions, your local power plant wishes to build taller smokestacks. The ultimate consequence of this would most likely be
A) the reaction of the sulfur with ozone, resulting in a breakdown of the ozone.
B) biological magnification.
C) to dilute the sulfur pollutants in the atmosphere and thus reduce their effects on the environment.
D) to create an environmental problem at a distance from the power plant.
E) a decrease in the pH of local lakes.
Know more about Air pollution here:
https://brainly.com/question/1187636
#SPJ11
sirens begin to blast through the night. the people of the town know a tornado is coming. what type of scientist would know how to predict that the tornado was coming? an astronomer a geologist a meteorologist an oceanographer
A meteorologist would know how to predict that a tornado was coming. The correct option is c) meteorologist.
Meteorologists are scientists who study the Earth's atmosphere and weather patterns. They analyze data from various sources, such as satellites, weather stations, and radar systems, to forecast weather conditions and monitor severe weather events like tornadoes.
Meteorologists use their knowledge of atmospheric dynamics and weather systems to predict when and where tornadoes may occur. They analyze factors such as temperature, humidity, wind patterns, and pressure systems to identify the potential for severe thunderstorms, which can spawn tornadoes. They also use advanced weather models and computer simulations to help refine their predictions.
When meteorologists detect a high likelihood of tornado development, they work with local authorities to issue warnings and alerts to the public. These early warnings give people time to seek shelter and take necessary precautions to protect themselves and their property.
Astronomers, geologists, and oceanographers are also scientists, but they study different aspects of the Earth and its surroundings. Astronomers study celestial objects and phenomena in the universe, such as stars, planets, and galaxies. Geologists investigate the Earth's physical structure, processes, and history. Oceanographers study the Earth's oceans, including their physical, chemical, and biological aspects.
In summary, meteorologists are the scientists responsible for predicting tornadoes and other weather-related events. Their expertise in the Earth's atmosphere and weather patterns allows them to provide vital information to help protect the public during severe weather events like tornadoes. Therefore, The correct option is c) meteorologist.
To learn more about meteorologist here:
https://brainly.com/question/29766406#
#SPJ11
sirens begin to blast through the night. the people of the town know a tornado is coming. what type of scientist would know how to predict that the tornado was coming? A) an astronomer B) a geologist C) a meteorologist D) an oceanographer
Identify the description of each cultural region.
Midwest
Northwest
Southwest
West Coast
It is the center of US wheat,
corn, and dairy farming.
Its culturally diverse population includes
African Americans, Anglo-Europeans,
Latinos, and Asians.
The use of Spanish-English bilingualism
is more common than in other US regions.
American Indian cultures such as the Inuit
and Aleut remain influential in some areas.
Midwest: US farming center. Northwest: Influential Inuit and Aleut cultures. Southwest: Bilingual, diverse population. West Coast: Innovation, liberal attitudes, tech companies.
How can we identify?
Based on the provided descriptions, the cultural regions can be identified as follows:
Midwest: This region is the center of US wheat, corn, and dairy farming.
Northwest: American Indian cultures such as the Inuit and Aleut remain influential in some areas.
Southwest: Its culturally diverse population includes African Americans, Anglo-Europeans, Latinos, and Asians. The use of Spanish-English bilingualism is more common than in other US regions.
West Coast: This region has a culturally diverse population and is known for its progressive and liberal attitudes. It is home to many tech companies and is a hub of innovation and creativity.
To know more about culture related question visit:
https://brainly.com/question/28097114
#SPJ1
all of the following were reasons wegener's theory was disregarded when it was first published except:
-Wegener's theory was "outside the box"
-Wegener's evidence of a movement motive was strong
-Wegener had evidence of similar geologic features on different continents
-Earth's crust was thought to be too inflexible
The main reason Wegener's theory was not disregarded when first published, except for the others listed, is: Wegener's evidence of a movement motive was strong.
Wegener's theory of continental drift, when first introduced, faced skepticism because it was "outside the box" and contradicted the belief that Earth's crust was too inflexible for continents to move.
However, he did have strong evidence supporting his theory, such as the presence of similar geologic features on different continents.
This evidence, combined with other findings, eventually led to the acceptance of his theory and the development of the concept of plate tectonics.
To know more about Wegener's theory click on below link:
https://brainly.com/question/2042762#
#SPJ11
you see a large, somewhat circular shield of clouds on satellite imagery covering several states in the central united states in the summer. it resembles an inland hurricane. what are you most likely looking at?
The large, circular shield of clouds covering several states in the central United States in the summer that resembles an inland hurricane is most likely a mesoscale convective system (MCS).
MCS is a complex of thunderstorms that organize on a scale larger than individual thunderstorms but smaller than extratropical cyclones, typically forming in the summer months in the central and eastern United States.
They can produce heavy rainfall, strong winds, and occasionally hail and tornadoes. The appearance of an MCS on satellite imagery can resemble that of a hurricane, but the processes driving the system are different.
They can also produce a type of circular feature known as a "bow echo," which resembles the curved shape of a bow or crescent moon. These features are often associated with high winds and can produce wind damage similar to that of a tornado.
For more question on tornadoes
https://brainly.com/question/28285636
#SPJ11
Part C
When air cools below its dew point temperature, the drops of water in the air condense, forming dew. Dew point temperature varies according to air pressure and humidity. When the air temperature is close to its dew point, there’s more moisture in the air, and the chances of rain and thunderstorms increase. On a map, isodrosotherms connect points of equal dew point temperature and indicate surface moisture.
Question
This map shows the dew point temperatures across the United States. The units are measured in degrees Fahrenheit. Follow the steps to complete the drawing.
Step 1: Isodrosotherms. Locate points of equal dew point temperature on the map. Use a green pen to connect these points by drawing smooth isodrosotherms. Make sure the isodrosotherms don’t cross each other. You may have to estimate some of the values. Label the isodrosotherms at the end of the line.
Step 2: Storms. Isodrosotherms indicate surface moisture. Typically, dew points greater than 70°F have the energy needed to produce severe weather. Shade the regions where dew point temperatures are 70°F or greater in green.
Answer:
Step 1: Isodrosotherms
To locate points of equal dew point temperature on the map, look for areas with similar numbers. You can draw smooth lines connecting these areas using a green pen to create the isodrosotherms. Make sure the lines don't cross each other. To label the isodrosotherms, write the dew point temperature at the end of the line.
Step 2: Storms
To shade the regions where dew point temperatures are 70°F or greater in green, follow these steps:
Look for areas on the map where the dew point temperature is 70°F or greater.
Use a green pen or highlighter to shade in these regions on the map.
Be sure to shade in all the areas where the dew point temperature is 70°F or greater, including any isolated areas that may be separate from the main shaded region.
Remember that dew point temperatures greater than 70°F indicate the potential for severe weather, so it's important to be thorough in shading these regions on the map.
Hope This Helps!
Answer:
Step 1: Isodrosotherms
To locate points with equal dew point temperature on the map, search for areas with similar numbers. Draw smooth lines using a green pen to connect these areas, creating the isodrosotherms, ensuring the lines do not cross each other. At the end of each line, write the dew point temperature to label the isodrosotherms.
Step 2: Storms
To indicate the regions where dew point temperatures are 70°F or greater in green, follow these steps:
Identify the areas on the map with dew point temperature equal to or greater than 70°F.
Use a green pen or highlighter to shade these regions on the map.
Remember to shade all areas with dew point temperatures greater than or equal to 70°F, including any isolated areas that may be separate from the main shaded region.
It is important to be thorough in shading these regions since dew point temperatures greater than 70°F indicate the potential for severe weather.
how do a tropical disturbance, tropical depression, and tropical storm relate to the formation of a hurricane in the atlantic ocean?'
Answer:
Overall, the decrease in emissions has been driven by a combination of factors including:
1. Increased use of natural gas: Natural gas is a cleaner-burning fossil fuel that produces fewer emissions compared to coal or oil. Over the past two decades, there has been a significant shift towards natural gas for electricity generation, largely due to the boom in shale gas production. This has helped to reduce emissions from the power sector.
2. Greater use of renewable energy: Renewables such as wind, solar, and hydropower produce no greenhouse gas emissions and have become increasingly competitive with fossil fuels in terms of cost. This has led to a significant increase in their use in the U.S. over the past decade, particularly in states with favorable policies and abundant natural resources.
3. Energy efficiency measures: Improvements in energy efficiency technologies and practices, such as more efficient appliances and buildings, have helped to reduce energy consumption and emissions. This has been driven by both government policies and private sector initiatives.
4. Economic changes: Slow economic growth and shifts in the U.S. economy towards less energy-intensive industries have also contributed to the decrease in emissions.
While these factors have helped to reduce U.S. emissions, there is still much work to be done to achieve significant reductions necessary to meet global climate goals.
A tropical disturbance, tropical depression, and tropical storm relate to the formation of a hurricane in the Atlantic Ocean. When the wind speed is less than 39 miles per hour, a tropical disturbance is formed. when the wind speed is 39 to 73 miles per hour, a tropical depression forms. Finally, when the wind speed reaches 74 miles per hour a tropical storm is formed.
The tropical storm has the potential to become a hurricane with sustained wind speeds exceeding 74 miles per hour. A tropical disturbance is an area of the ocean where there are thunderstorms, which indicate that the weather conditions are changing. In these areas, the air pressure is lower than that in the surrounding area, and there is less wind.
When the wind reaches a certain speed, a tropical depression is formed. The stronger the wind, the more severe the tropical depression will be. A tropical storm has sustained winds of between 39 and 73 miles per hour. These winds create heavy rainfall and strong waves. Tropical storms and hurricanes are formed when thunderstorms continue to develop, and the wind speed continues to increase.
Hurricanes form in areas of low air pressure, where there is plenty of warm water, and when the wind is less than 39 miles per hour. Hurricanes are among the most dangerous and destructive natural phenomena on the planet. In conclusion, a tropical disturbance, a tropical depression, and a tropical storm are stages in the formation of a hurricane in the Atlantic Ocean.
To learn more about hurricane here:
https://brainly.com/question/2835662#
#SPJ11
Which are characteristics of Australia's outback region?
Select all that apply.
Responses
It is where the Southern Alps are located.
It is a large region of inland plains.
It has a very dry climate.
It has regions of high elevation covered by glaciers.
Option (c), The outback portion of Australia's country has a particularly arid environment.
What would you say about Australia's outback?The terms "Outback" and "the bush" are used to describe any region of Australia that is removed from the country's denser population centers. As such, it is "out back" of Australia's larger coastal cities. The Outback is best described as a dry or semi-dry, open area that is typically undeveloped.
What is the Outback of Australia's fact?Australia's vast and diverse Outback, which covers the bulk of the nation, is considered to include anything that is not located in densely populated coastal areas. In addition to the largest temperate woodlands in the world and a subtropical savanna, it is made up of ten deserts.
Learn more about subtropical savanna: https://brainly.com/question/13997745
#SPJ1
(PLEASE HELP) Often compared to the Feudalism, _________ were similar to nobles in Europe as they required having ready and able armies to be called upon. Question 3 options: Rajas Mansabdar Emperors Sultans
Mansabdars were similar to nobles in Europe as they required having ready and able armies to be called upon, often compared to Feudalism.
How did feudalism start in medieval Europe?Feudalism, in all of its guises, typically develops as the result of an empire becoming more decentralized. This was particularly true of the Carolingian Empire in the ninth century AD, which lacked the administrative framework required to support cavalry without granting territory to these mounted men.
Mansabdars were a class of military commanders in the Mughal Empire of India who held a rank or mansab, which determined their status and salary. They were responsible for maintaining and leading armies, and were expected to be ready to fight at a moment's notice. This system of military commanders and their armies is often compared to European feudalism, in which lords and their vassals had similar military obligations.
Rajas were rulers or kings of Indian states, emperors were the highest rulers in an empire, and sultans were Muslim rulers of a kingdom or empire, but none of these specifically referred to the military commanders with mansabs in the Mughal Empire.
Learn more about feudalism here:
https://brainly.com/question/28524143
#SPJ5
What do you mean by animal physilogy
One of the green house gases is carbon dioxide. Explain how increase in the amount of carbon dioxide in the atmosphere causes global warming?
The increase in global temperatures is being brought on by the rising amounts of greenhouse gases, specifically carbon dioxide.
What are the reasons why greenhouse gas levels are rising?The rise in greenhouse gas concentrations is due to human activity. Using fossil fuels like coal and oil has raised the level of atmospheric carbon dioxide during the past century (CO2).
Why do global temperatures rise as a result of the greenhouse effect?The greenhouse effect is the major contributor to climate change. Some gases in the atmosphere of the Earth operate somewhat like the glass in a greenhouse, trapping solar heat and preventing it from escaping back into space and contributing to global warming.
To know more about Green house gases visit:-
https://brainly.com/question/14614521
#SPJ1
what evidence best supports the idea that 300 million years ago the southwestern united states was a vast desert of sand?
The best evidence that supports the idea that 300 million years ago the southwestern United States was a vast desert of sand comes from the study of sedimentary rocks and fossils found in the region.
The sedimentary rocks in the region, such as sandstones, conglomerates, and shales, provide evidence of the past environment. These rocks contain cross-bedding and ripple marks, which are characteristic features of sand dunes that were formed by wind action.
The presence of these features in the rocks suggests that the area was once covered by a vast desert of sand.
In addition, the fossils found in the region provide further evidence of the past environment. Fossils of animals that are adapted to living in desert environments, such as reptiles, amphibians, and insects, have been found in the sedimentary rocks of the region. These fossils suggest that the region was once a hot, arid desert.
Finally, the absence of fossils of marine animals in the sedimentary rocks of the region also supports the idea that the area was once a desert. Marine animals require water to survive, so the absence of their fossils suggests that the area was not covered by water at the time the rocks were formed.
In conclusion, the study of sedimentary rocks and fossils provides compelling evidence that the southwestern United States was a vast desert of sand 300 million years ago.
For more question on sedimentary rocks
https://brainly.com/question/30765754
#SPJ11
overall, which latitude gets the most energy/insolation year round? a. 60 degrees north b. 45 degrees north c. 23.5 degrees north d. the equator e. all latitudes get the same amount of energy
The latitude that receives the most energy/insolation year-round is the equator. Therefore, the correct option is d. the equator.
The amount of solar radiation per unit area on the Earth's surface is known as insolation. It is affected by the angle at which the sun's rays hit the Earth's surface, which is influenced by latitude. The latitude that gets the most insolation throughout the year is the equator because it is located at 0 degrees and receives the most direct sunlight.
The equator receives the most insolation because of its position relative to the sun. The sun's rays are perpendicular to the Earth's surface at the equator, making it the most direct.
At higher latitudes, the angle at which the sun's rays strike the Earth is reduced, resulting in less direct sunlight and less insolation.
For more question on equator
https://brainly.com/question/1264608
#SPJ11
how hypocenters and epicenters related?
Answer: The epicenter is the point on the earth's surface vertically above the hypocenter (or focus), point in the crust where a seismic rupture begins.
i know its right because i got it right hope it helps
The hypocenter and epicenter are related as they are both points associated with an earthquake.
The hypocenter is the point beneath the Earth's surface where the earthquake originates, while the epicenter is the point on the surface directly above the hypocenter.
To further explain, an earthquake begins at the hypocenter, which is also known as the focus. This is where the initial rupture of the Earth's crust occurs. Seismic waves then radiate outward from this point, traveling through the Earth's interior and along the surface.
The epicenter is the point on the Earth's surface directly above the hypocenter, and it is usually the location where the strongest ground shaking is experienced during an earthquake.
Scientists use data from seismographs to determine the locations of the hypocenter and epicenter, which helps them understand the earthquake's origin and predict potential damage in affected areas.
To know more about epicenter click on below link:
https://brainly.com/question/28136716#
#SPJ11
when each rock layer is deposited on top of the one below it without any interruptions and without depositional gaps, the strata are called .
Answer:
When each rock layer is deposited on top of the one below it without any interruptions and without depositional gaps, the strata are called conformable layers or conformable strata. This indicates a continuous sequence of sediment deposition over time, without any significant events interrupting the process. In contrast, unconformities represent gaps in the geologic record where there has been erosion, non-deposition, or deformation between rock layers.
When each rock layer is deposited on top of the one below it without any interruptions and without depositional gaps, the strata are called "consecutive strata" or "continuous strata."
When each rock layer is deposited on top of the one below it without any interruptions and without depositional gaps, the strata are called conformable layers. What are conformable layers? Conformable layers are rock layers deposited one on top of the other without any evidence of a significant time gap in between. They are also referred to as conformable strata, which means that the layers conform to one another due to a consistent depositional environment and lack of erosion, which creates a uniformity in rock type, thickness, and age throughout the entire succession.
Conformable layers are the result of uninterrupted sedimentation during deposition. When sedimentation occurs with no significant pause, the layers stack on top of one another, producing conformable layers. When the process of sedimentation is interrupted, either by erosion or non-deposition, it results in a gap in the sedimentary record, forming unconformities.
Learn more about strata:
https://brainly.com/question/11386135
#SPJ11
Life standards in Asia, Africa and Europe
The life standards from all continents varies from one another due to factors like culture, technology, politics, health care, education and so much more
What are the Life standards in Asia, Africa and EuropeAsia:
Asia is the world's largest continent, and it is home to many different countries with diverse cultures and standards of living. Generally speaking, some of the countries in East and Southeast Asia, such as Japan, South Korea, Singapore, and Taiwan, have high standards of living with good healthcare systems, high levels of education, and advanced technology. However, there are also many countries in South and Central Asia, such as India, Bangladesh, and Pakistan, that have lower standards of living with lower levels of access to healthcare, education, and basic necessities such as clean water and sanitation.
Africa:
Africa is a continent with great diversity in terms of geography, culture, and standards of living. Some of the more developed countries in Africa, such as South Africa, Egypt, and Morocco, have higher standards of living with good healthcare systems, access to education, and advanced infrastructure. However, many countries in sub-Saharan Africa struggle with poverty, lack of access to clean water and sanitation, and poor healthcare and education systems.
Europe:
Europe is a diverse continent with many countries that have high standards of living. Generally speaking, Western European countries such as Germany, France, and the United Kingdom have high standards of living with good healthcare systems, high levels of education, and advanced infrastructure. However, there are also some countries in Eastern Europe, such as Bulgaria and Romania, that have lower standards of living with less developed healthcare and education systems.
It's worth noting that "life standards" can also be measured by factors such as income inequality, political stability, and quality of life indicators such as access to cultural and leisure activities. These factors can also vary greatly within each continent and country.
Learn more on continent here;
https://brainly.com/question/22687489
#SPJ1
which volcanoes and eruption types emit volcanic gasses like steam, carbon dioxide and sulfur dioxide?
During eruptions, most volcanoes release volcanic gases such as steam, carbon dioxide, and sulfur dioxide. Some volcanoes, however, are known to release more of these gases than others.
Shield volcanoes, for example, which are characterized by low-viscosity magma and effusive eruptions, tend to emit significant amounts of steam and smaller amounts of carbon dioxide and sulfur dioxide. Kilauea and Mauna Loa in Hawaii are two examples of shield volcanoes that release these gases.
Stratovolcanoes, on the other hand, emit significant amounts of steam, carbon dioxide, and sulfur dioxide due to their high-viscous magma and explosive eruptions. Mount St. Helens in the United States, Mount Pinatubo in the Philippines, and Mount Fuji in Japan are examples of stratovolcanoes that release these gases.
Volcanic gases can have serious consequences for the environment and human health. For example, sulfur dioxide can react with water vapor and other gases in the atmosphere to create sulfate aerosols, which can obstruct sunlight and cool the Earth's surface. The greenhouse gas carbon dioxide adds to global warming.
As a result, studying and tracking volcanic gases is critical to understanding the Earth's climate and the potential effects of volcanic activity on human populations.
Learn more about Global Warming:
https://brainly.com/question/3223175
Volcanoes and eruption types that emit volcanic gases like steam, carbon dioxide, and sulfur dioxide are stratovolcanoes and shield volcanoes. Stratovolcanoes and shield volcanoes are the two types of volcanoes that emit volcanic gases such as steam, carbon dioxide, and sulfur dioxide.
These two types of volcanoes are responsible for most of the eruptions that take place on Earth. Stratovolcanoes are cone-shaped volcanoes formed by layers of ash and lava. They have steep slopes and are located near subduction zones. Their eruption types include explosive eruptions that release gases like sulfur dioxide, carbon dioxide, and steam into the atmosphere.
The explosive eruptions are caused by the buildup of gases and pressure in the volcano's magma chamber. When the pressure gets too high, the gases and ash are released, causing an explosive eruption. Shield volcanoes, on the other hand, are broad and flat with gentle slopes.
They are formed by the flow of lava and have gentle eruption types that are less explosive than those of stratovolcanoes. However, they still emit volcanic gases such as steam, carbon dioxide, and sulfur dioxide during eruptions. The gases are released when magma rises to the surface and erupts. The lava flows out of the volcano in a steady stream rather than explosively, so the gases are released slowly into the atmosphere.
In conclusion, stratovolcanoes and shield volcanoes are the two types of volcanoes that emit volcanic gases such as steam, carbon dioxide, and sulfur dioxide. These gases are released during explosive eruptions in stratovolcanoes and during the slow flow of lava in shield volcanoes.
To learn more about Volcanoes here:
https://brainly.com/question/25121802#
#SPJ11
which of the following factors help determine whether a volcanic eruption will be violent or relatively quiescent? radio button unchecked amount of dissolved gases in the lava radio button unchecked all of these factors radio button unchecked temperature radio button unchecked composition of the lava submit
All of these factors help determine whether a volcanic eruption will be violent or relatively quiescent. The amount of dissolved gases in the lava, temperature, and composition of the lava all play crucial roles in the eruptive behavior of a volcano.
The amount of dissolved gases in the lava, such as water vapor and carbon dioxide, affects the explosiveness of the eruption. Higher amounts of dissolved gases lead to a more violent eruption, as the gases expand and cause the magma to break apart forcefully when it reaches the surface.
Temperature also plays a significant role in the eruption style. Hotter, more fluid lava flows more easily and tends to produce gentler eruptions, as it can release its gas content more efficiently. In contrast, cooler and more viscous lava is less efficient at releasing gas, resulting in a buildup of pressure that can cause violent eruptions.
The composition of the lava is another essential factor. Basaltic lava, which is relatively low in silica content, tends to be more fluid and produces less violent eruptions. On the other hand, lava with higher silica content, such as andesitic or rhyolitic lava, is more viscous and can trap gases, leading to more explosive eruptions.
In summary, the amount of dissolved gases in the lava, temperature, and composition of the lava are all critical factors that determine whether a volcanic eruption will be violent or relatively quiescent.
To learn more about volcanic eruption here:
https://brainly.com/question/9856630#
#SPJ11
The use of GPS is becoming popular. Explore the advantages and disadvantages of using GPS.
Advantages of Global Positioning System :
GPS is extremely easy to navigate because it tells you to direction for every turns you’re taking otherwise you need to fancy reach to your destination.
GPS works altogether weather so you would like to not worry of climate as in other navigating devices.
GPS costs you very low as compared other navigation systems.
Most attraction of this technique is its100% coverage on earth.
It also helps you to look nearby restaurants, hotels and gas stations and is extremely useful for a replacement place.
Due to its low cost, it’s very easy to integrate into other technologies like telephone.
System is updated regularly by United States government and hence is extremely advance.
This is the simplest navigating system in water as in larger water bodies we are often misled thanks to lack of proper directions.
GPS signal is out there worldwide. Therefore, users won’t be bereft of it anywhere.
GPS are often used anywhere within world, it’s powered by world satellites, so it are often accessed anywhere, a solid tracking system and a GPS receiver are all you would like.
Disadvantages of worldwide Positioning System :
Sometimes GPS may fail thanks to certain reasons and therein case you would like to hold a backup map and directions.
If you’re using GPS on A battery operated device, there could also be A battery failure and you’ll need a external power supply which isn’t always possible.
Sometimes GPS signals aren’t accurate thanks to some obstacles to signals like buildings, trees and sometimes by extreme atmospheric conditions like geomagnetic storms.
GPS chip is hungry for power which drains battery in 8 to 12 hours. this needs replacement or recharge of battery quite frequently.
GPS doesn’t penetrate solid walls or structures. it’s also suffering from large constructions or structures.
state two merits and demerits of land rotation and crop rotation
Answer:
Explanation:
Land rotation and crop rotation are both agricultural practices used to manage and maintain the fertility of the soil.
Two merits of land rotation are:
1. Improved soil fertility: By alternating the crops grown on a particular piece of land, land rotation helps to improve soil fertility. This is because different crops have different nutrient requirements and deplete the soil of different nutrients. Growing different crops in different seasons also helps to prevent soil erosion.
2. Reduced disease and pest infestation: Planting the same crop in the same area for many years can lead to a buildup of pests and diseases that are specific to that crop.
Land rotation helps to break this cycle, as pests and diseases are less likely to survive when their host plants are not present.
Two demerits of land rotation are:
1. Reduced crop yields: In some cases, rotating crops may result in lower crop yields, especially if the new crops grown are less productive or less profitable than the previous ones.
2. Increased labor and equipment costs: Land rotation can be labor-intensive and may require additional equipment, such as plows and tillers, to prepare the soil for new crops.
Two merits of crop rotation are:
1. Improved soil health: Crop rotation helps to improve soil health by increasing soil organic matter and nutrient levels, reducing soil compaction, and improving soil structure and water-holding capacity.
2. Reduced pest and disease pressure: Crop rotation helps to reduce pest and disease pressure by interrupting the life cycles of pests and diseases that are specific to certain crops.
Two demerits of crop rotation are:
1. Limited crop options: Crop rotation may limit the types of crops that can be grown in a particular area, as some crops may not be compatible with the rotation cycle or may not thrive in the local climate.
2. Increased management complexity: Crop rotation requires careful planning and management, as well as knowledge of plant biology and soil science. This can be a challenge for small-scale farmers who may not have access to the necessary resources or expertise.
Which are characteristics of the low islands of Micronesia and Polynesia?
Select all that apply.
Responses
They form an atoll surrounding a lagoon.
They are made up of corals.
They were formed by volcanic activity.
They slope from a central peak toward the coast.
The low islands of Micronesia and Polynesia have the following characteristics: They create an atoll encircling a lagoon. Corals make up their structure.
What distinguishes Micronesia's and Polynesia's low islands?Low islands in this area are typically made of coral and have a low altitude. High islands typically have high altitudes and volcanic origins. Whereas Hawaii and other high islands make up most of Polynesia, Micronesia is primarily made up of low islands.
What are the names of the islands in Polynesia and Micronesia built of coral?Although though atolls are composed of numerous coral communities, they are nevertheless considered to be one island. Low islands predominate in Micronesia and Polynesia's island areas.
To know more about islands visit:-
https://brainly.com/question/1331563
#SPJ1