what are the major species present in 0.250 m solutions of each of the following acids? calculate the ph of each of these solutions. a. hclo4 b. hno3

Answer:

8 atoms it have but u don't know

For extraction, there should be an option c) lower solute solubility in the second phase.

Extraction is a process in which a solute is separated from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

In the first phase, the solute has higher solubility, meaning it dissolves more readily.

In the second phase, the solute has lower solubility, meaning it is less likely to dissolve.

In order for extraction to be successful, the solute must be differently soluble in the phases. This ensures that the solute is separated efficiently and effectively.


The process of extraction involves the formation of two liquid phases and the transfer of the solute from one phase to the other. The solute is transferred from the first phase to the second phase, where it is separated from the solution.


To summarize, extraction is a process of separating a solute from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

Therefore, for extraction, it is necessary for the solute to have a lower solubility in the second phase. and hence the correct answer is option c.

To know more about extraction, refer here:

https://brainly.com/question/12910778#

#SPJ11

The unknown amine reacted with iodomethane and afforded the following tetraalkylammonium salt.

The structure of the unknown amine is an aliphatic amine. An aliphatic amine is an organic compound with at least one nitrogen atom connected to alkyl groups. It may have single, double, or triple bonds between nitrogen and the carbon atoms of the alkyl group.

Aliphatic amines can be secondary, tertiary, or primary depending on the number of alkyl groups attached to the nitrogen atom.

In the case of the unknown amine, the number of alkyl groups connected to the nitrogen atom is four, meaning that it is a primary aliphatic amine. aliphatic amines have the general formula of RCH2NH2, where R represents a hydrocarbon chain.

To know more about aliphatic amine click on below link:

https://brainly.com/question/24114560#

#SPJ11

The volume of 9.7 moles of an ideal gas at stop will be 218.8 L

What is volume of gas ?

To answer this question, we need to know the conditions of "stop." Assuming that you meant "STP" (standard temperature and pressure), which is defined as 0°C (273 K) and 1 atm (101.3 kPa), the volume of 9.7 moles of an ideal gas would be 218.8 L, according to the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. At STP, the pressure is 1 atm and the temperature is 273 K. The value of R is 0.08206 L atm/mol K.

Therefore, V = nRT/P = (9.7 mol)(0.08206 L atm/mol K)(273 K)/(1 atm) = 218.8 L.

To know more about volume , visit:

https://brainly.com/question/24189159

#SPJ1

Complete question is: The volume of 9.7 moles of an ideal gas at stop will be 218.8 L.

The mass percent of carbon in decane, C{10}H{22}, is 12.11%.

This can be determined by using the atomic mass of each element. Carbon has an atomic mass of 12.01 and Hydrogen has an atomic mass of 1.008.

When calculating the mass percent, you must first determine the total molar mass of the compound.

The total molar mass of decane is calculated by multiplying the atomic mass of each element by the number of atoms of that element in the molecule.

For example, the total molar mass of decane is calculated by multiplying 12.01 (atomic mass of carbon) by 10 (the number of carbon atoms) and 1.008 (atomic mass of hydrogen) by 22 (the number of hydrogen atoms).

This yields a total molar mass of 142.256.

The mass percent of carbon can be determined by dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.

This is calculated by dividing 12.01 (atomic mass of carbon) by 142.256 (total molar mass of decane) and then multiplying by 100, which yields a mass percent of 12.11%.

The mass percent of carbon in decane, C{10}H{22}, is 12.11%.

This was determined by calculating the total molar mass of decane, which is 142.256, and then dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.

to know more about decane refer here:

https://brainly.com/question/28585062#

#SPJ11

The molality of dichloromethane in this solution is 6.25 m.

The molality of dichloromethane in a solution of dichloromethane and 2-pentanone is calculated using the formula:

molality (m) = moles of solute (mol) / kilograms of solvent (kg)

In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-pentanone (CH₃COC₃H₇). The mole fraction of dichloromethane is 0.350, so there are 0.350 moles of dichloromethane in one mole of the solution.

To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-pentanone (CH₃COC₃H₇), is the sum of the atomic weights of each element, which is 86.13 g/mol. One mole of the solution contains 0.350 moles of dichloromethane and 0.650 moles 2-pentanone. Therefore, the mass of 2-pentanone is:

mass = moles x molar mass = 0.650 moles x 86.13 g/mol = 55.9845 g

Solving for the molality, we get:

m = 0.350 moles / (5.9845 g)(1 kg/1000g)

m = 6.25 mol/kg = 6.25 m

Learn more about molality here: https://brainly.com/question/24065939.

#SPJ11

There are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.

The chemical formula of hydrogen bromide is HBr. A mole is a unit of measurement that expresses the amount of a chemical substance that includes a fixed number of units of that substance. One mole of a substance is equal to the Avogadro number or 6.022 x 10²³ of that substance.In this problem, we need to figure out how many moles are in 6.4 x 10²⁴ molecules of HBr. We'll start by using Avogadro's number to convert the number of molecules to moles.

According to Avogadro's number, 6.022 x 10²³ molecules are in one mole.

Therefore, to figure out how many moles there are in 6.4 x 10²⁴ molecules,

we will use the following formula:

moles = number of molecules ÷ Avogadro's numbermoles = 6.4 x 10²⁴ ÷ (6.022 x 10²³)moles = 1.06 moles

So, there are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.

For more such questions on hydrogen bromide, click on:

https://brainly.com/question/20460954

#SPJ11

The mass gain that happened after the reaction could have been caused due to the matter was created in the reaction .  

What is mass gain?

In physics, mass gain refers to an increase in mass in a chemical or nuclear reaction. It is the difference between the mass of the reactants and the mass of the products after a chemical reaction has occurred.

What happened in the given problem?

According to the given problem, the starting mass of the apparatus and solid was 113.249 g. After the reaction was complete, the apparatus was reweighed. The resulting mass was 113.276 g. The problem asks which of the following could have caused the mass gain.

The mass gain could have been caused by the following:

They forgot to weigh the mass of the gas-generating solid before the reaction

The apparatus picked up extra water droplets between weighing's.

Matter was created in the reaction.

The apparatus picked up extra water droplets between weighings, but they forgot to weigh the mass of the gas-generating solid before the reaction, and matter was created in the reaction.

To know more about the mass https://brainly.com/question/19694949

#SPJ11

The radius of a barium atom is 2.68 Å.

Barium is a chemical element that is silvery-white in color and can be found in the periodic table with the symbol Ba.

The density of barium is 3.51 g/cm3, and it has a body-centered cubic unit cell that crystallizes.

Determine the length of the edge of the unit cell. Since barium has a body-centered cubic unit cell, the length of the edge of the unit cell:

Edge length = 4r /√3

Where r is the radius of the atom.

The volume of the unit cell using the formula:

Volume of unit cell = Edge length³

The number of atoms present in the unit cell. Since barium has a body-centered cubic unit cell, the number of atoms present in the unit cell :

Number of atoms in the unit cell = 2

The mass of a single atom of barium using the formula:

Mass of a single atom = Density of barium / Avogadro’s number

Where Avogadro’s number is 6.02 × 10²³ atoms/mol.

The radius of a barium atom using the formula:

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

The radius of the barium atom :

Edge length = 2r√3

r = (Edge length) / 2√3

Volume of the unit cell = (Edge length)³

Number of atoms in the unit cell = 2

Mass of a single atom = Density of barium / Avogadro’s number

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

Therefore, the radius of a barium atom is 2.68 Å.

to know more about barium refer here:

https://brainly.com/question/30888146#

#SPJ11

The addition of low ionic strength solution (LISS) to the testing environment when performing an indirect antiglobulin test is designed to enhance the speed and sensitivity of the test.

The LISS solution reduces the time required for the agglutination reaction to occur between the patient's red blood cells (RBCs) and antiglobulin reagent (Coombs reagent).This reagent is an anti-human globulin (AHG) that attaches itself to the antibodies present on the RBCs' surface. The test is an indirect antiglobulin test, which involves incubating the patient's RBCs with a known anti-human globulin. The LISS solution's addition to the testing environment increases the speed and sensitivity of the test. It also helps in reducing the reaction time and helps detect antibodies that are present in low concentrations.

The LISS solution enhances the sensitivity of the antiglobulin test by reducing the ionic strength of the testing environment. This solution neutralizes the ionic charges on the surface of the RBCs, allowing the AHG to attach itself to the RBCs' antigens more efficiently. This, in turn, promotes more efficient agglutination and quicker antibody detection during the indirect antiglobulin test.

Learn more about antiglobulin test at:

https://brainly.com/question/30707881

#SPJ11

Answer: The new volume of gas in the piston is 77.59 ml.

Given,Initial volume of gas in the piston = 225.0 ml Initial pressure of gas in the piston = 1.00 atmM Final pressure of gas in the piston = 2.90 atm. We have to find out the new volume of gas in the piston. Assuming that the moles of gas and temperature are held constant, we can use Boyle's Law to solve this problem.

Boyle's Law states that for a given amount of gas kept at a constant temperature, the volume of the gas is inversely proportional to its pressure. Mathematically, it can be represented as P1V1 = P2V2 where,P1 is the initial pressure of gasV1 is the initial volume of gas P2 is the final pressure of gas V2 is the final volume of gas

Let's substitute the given values in the above equation. P1V1 = P2V2225.0 × 1.00 = 2.90 × V2V2 = (225.0 × 1.00)/2.90V2 = 77.59 ml

Know more about Boyle's Law here:

https://brainly.com/question/30367067

#SPJ11

When 0.0400 mol KOH is added to 1.0 L of a solution that is 0.25 M in NH3 and 0.20 M in NH4NO3, the pH increases only slightly.

The statement that best explains this is that the weak acid (NH4+) will combine with OH- to create a weak base (NH3). Explanation: NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH–(aq)The ammonium ion (NH4+) acts as a weak acid that combines with hydroxide ion (OH–) to form ammonia (NH3) and water (H2O).

It is important to remember that ammonia is not strong enough to raise the pH significantly and that ammonium is a weak acid that won't produce a lot of hydroxides. Therefore, the pH change will be negligible. The explanation for the above reaction is as follows: NH4+ + OH– ⇌ NH3 + H2O In this equilibrium, the weak acid (NH4+) will combine with OH– to create a weak base (NH3), resulting in the pH not rising significantly.

You can read more about molarity at https://brainly.com/question/30404105#:

#SPJ11

The number of moles of solute is 0.264 moles.

The concentration of a solution can be determined by calculating the number of moles of solute present in a given volume. The concentration of a glucose solution given is 0.750 m, which means that there are 0.750 moles of glucose present in 1 liter of the solution.

To calculate the number of moles of solute present in 352 ml of this solution, we must first convert 352 ml to liters. This is done by dividing 352 by 1000, giving 0.352 liters.

To calculate the number of moles of glucose in this volume of solution, we must multiply 0.750 moles by 0.352 liters, giving 0.264 moles.

This means that in a volume of 352 ml of a solution with a concentration of 0.750 m, there are 0.264 moles of glucose present.

Therefore, the number of moles of solute present in a volume of 352 ml of glucose solution is 0.264 moles.

To know more about moles, refer here:

https://brainly.com/question/26416088#

#SPJ11

The cranial nerves associated with gastrointestinal tract motor output are vagus nerve, glossopharyngeal nerve, and facial nerve. The correct options are option A, D, and F.

Cranial nerves are the nerves that emanate directly from the brain. There are 12 pairs of cranial nerves. These nerves are responsible for transmitting sensory information such as vision, hearing, and touch as well as motor signals like movement and coordination to different parts of the body.

The cranial nerves that are responsible for gastrointestinal tract motor output are Vagus, Glossopharyngeal, and Facial.

The vagus nerve is the 10th cranial nerve and is one of the most critical nerves for gut activity. This nerve is a major parasympathetic supply to the upper GI tract, including the stomach and small intestine.

It has both motor and sensory fibers. The parasympathetic component of the vagus nerve promotes the release of acetylcholine, which stimulates the GI muscles to contract and propel food through the digestive tract.

The vagus nerve may also control some metabolic activities, including insulin release and glucose metabolism.

The glossopharyngeal nerve is the 9th cranial nerve and plays an essential role in controlling the muscles of the pharynx and throat. This nerve's motor component is responsible for activating the pharynx and upper esophageal sphincter when swallowing, which helps in propelling food through the GI tract.

The facial nerve is the 7th cranial nerve and plays a crucial role in controlling the muscles of facial expression. It also has a sensory component, which is responsible for taste perception in the anterior two-thirds of the tongue.

Additionally, it supplies parasympathetic fibers to the salivary and lacrimal glands, which are responsible for secreting enzymes and fluids that help in digestion.

To know more about vagus nerve, refer here:

https://brainly.com/question/30175573#

#SPJ11

Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.

Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.

When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.

To know more about electronic configuration, refer

https://brainly.com/question/26084288

#SPJ1

The mass of carbon that will remain after 5730 years is 362.4 grams.

The decay of carbon-14 follows first-order kinetics. The half-life of carbon-14 is 5730 years, which means that in 5730 years, half of the initial amount of carbon-14 will decay.

This can be expressed as:

[tex]N = N_0/2^{(t/T)}[/tex]

where:

[tex]N_0[/tex] is the initial amount of carbon

N is the final amount of carbon after t years

T is the half-life of carbon

In this case, we want to find the amount of carbon-14 remaining after one half-life, which is 5730 years. Therefore, we can substitute N0 = 724.8 g, t = 5730 years, and T = 5730 years into the equation:

We can substitute the given values into the formula:

[tex]N = 724.8/2^{(5730/5730)}[/tex]

= 362.4 g

Therefore, after one half-life, 362.4 g of carbon will remain.

To learn more about Half-Life refer: https://brainly.com/question/14220374

#SPJ11

Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.

The molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.

Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.

Its value is 6.023×10²³ particles per mole.

The molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?

moles= (32.10 grams × 1 mole)÷ 4 grams

moles= 8.025 moles

The amount of moles of He in 32.19 grams is 8.025 moles.

You can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?

amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole

amount of atoms of He= 4.83×10²⁴ atoms

Finally, 4.83×10²⁴ atoms of He are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

Answer:

C5H6

Explanation:

Alcohol formula calculation

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles.

The ratio of carbon to hydrogen in the empirical formula is 1:1.20.

To get whole numbers, we can multiply both numbers by 5.

The empirical formula of the alcohol is C5H6.

Formula used: moles = mass / molar mass

Name of formula: Mole calculation

What to watch: Make sure to use the molar masses of the correct compounds.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

ChatGPT

The molecular formula of a compound is the whole number multiple of its empirical formula. The empirical formula is the simplest formula. Here the empirical formula of the alcohol is C₅H₆.

The empirical formula of a compound is defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound.

In order to find out the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

moles of CO₂ = mass of CO₂ / molar mass of CO₂

moles of CO₂ = 0.625 g / 44.01 g/mol

moles of CO₂ = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H₂O = mass of H₂O / molar mass of H₂O

moles of H₂O = 0.307 g / 18.02 g/mol

moles of H₂O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Thus the empirical formula of the compound is C₅H₆.

To know more about empirical formula, visit;

https://brainly.com/question/14044066

#SPJ2

The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2

The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:

Glucose → Lactic Acid + Energy (ATP)

The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:

Glucose → Ethanol + Carbon Dioxide + Energy (ATP).

Hence, we can see that this is way that anaerobic respiration occurs.

Learn more about anaerobic respiration:https://brainly.com/question/12605249

#SPJ1

Answer:

No the correct answer would be C12H22O11 this is because you have the same atoms listed in two different places.

Explanation:

Answer: If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, that would be incorrect. The correct molecular formula for sucrose is C12H22O11.

What is the correct molecular formula for sucrose?

The molecular formula for sucrose is C12H22O11. Sucrose is a disaccharide, which means it is made up of two simple sugar molecules. Sucrose is composed of one glucose molecule and one fructose molecule, which are bonded together by a glycosidic linkage between the anomeric carbon atoms.

If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, it would be incorrect because it doesn't accurately represent the composition of sucrose. The formula C6H11O5 represents a simple sugar molecule known as glucose, while the formula C6H11O6 represents another simple sugar molecule known as fructose. Sucrose, on the other hand, is made up of both glucose and fructose.

Therefore, the correct molecular formula for sucrose is C12H22O11.


Learn more about C12H22O11 here:

https://brainly.com/question/14315748#


#SPJ11

A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules. This statement is true.

The given statement "a conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules" is true because a conductor is distinguished from an insulator with the same number of atoms by the number of nearly free electrons. A conductor is a substance that easily transmits heat or electricity through it. The reason why conductors do that is that they have free electrons available in their outer shells, so when a voltage is applied to them, the free electrons become excited and start to flow. On the other hand, an insulator is a substance that does not allow electricity or heat to flow through it. Insulators have a high amount of resistance, which means that they do not allow electrical current to pass through them.

The question was incomplete, but most probably your question was:

A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules (True/False)

Learn more about a conductor at https://brainly.com/question/24154868

#SPJ11

The technique used in this investigation is titration.

Titration is a laboratory method used to determine the amount or concentration of a substance in a sample. A reagent, known as the titrant, is added to a solution to react with the substance being studied, known as the analyte. The titration endpoint is determined by observing an indicator's colour change or by performing a calculation.

Titration is a common method used in analytical chemistry for quantifying analytes' concentrations. Acid-base titrations, redox titrations, and complexometric titrations are some of the most common types of titrations used in chemistry labs. Titration is used to calculate the amount of acid, base, salt, or other substance in a sample.

Learn more about titration at:

https://brainly.com/question/13307013

#SPJ11

The RF value of eugenol will increase if the mobile phase is changed to 40% ethyl acetate in hexanes.

This is because the polarity of ethyl acetate is higher than that of hexanes, making it a better solvent for the eugenol to dissolve in. Therefore, the RF value will increase as the compound is able to move further up the TLC plate.

To illustrate, when the eugenol is placed on a TLC plate with a mobile phase consisting of 40% ethyl acetate in hexanes, the eugenol will dissolve in the ethyl acetate and migrate towards the top of the plate.

The RF value is the distance that the solvent front has traveled, in relation to the distance traveled by the compound, so it will be higher when the compound has been able to move further up the plate.

In conclusion, the RF value of eugenol will increase when the mobile phase is changed to 40% ethyl acetate in hexanes due to the higher polarity of the ethyl acetate, allowing the compound to move further up the TLC plate.

To know more about RF value refer here:

https://brainly.com/question/31117352#

#SPJ11

If the temperature of the gas is reduced from 91°C to 0°C at constant pressure, the volume of the gas will decrease from 91 ml to 68.5 ml.

A gas has a volume of 91 ml at a temperature of 91°C. Use the combined gas law, which is a variation of the ideal gas law that holds pressure constant while allowing for changes in volume and temperature.

V1/T1 = V2/T2P = constant

Where V1 is the initial volume of the gas, T1 is the initial temperature of the gas, V2 is the final volume of the gas, T2 is the final temperature of the gas, and P is the constant pressure that the gas is held at.

We'll begin by plugging in the values that we know. V1 = 91 ml, T1 = 91°C, P = constant, V2 = ?, T2 = 0°C.

We can simplify the temperature values by converting them to Kelvin, since Kelvin is the temperature scale that is used in the gas laws. To convert Celsius to Kelvin, we simply add 273 to the Celsius value.

T1 = 91°C + 273 = 364 KT2 = 0°C + 273 = 273 KNow we can plug in the values and solve for V2. V1/T1 = V2/T2(91 ml)/(364 K) = V2/(273 K)Simplifying this equation, we get:V2 = (91 ml)(273 K)/(364 K)V2 = 68.5 ml

to know more about temperature refer here:

https://brainly.com/question/15267055#

#SPJ11

The term is used to describe the electrons present in the outermost energy level is the valence electrons.

The number of the electrons in the outermost shell of the particular atom that determines its reactivity, or the tendency to form the chemical bonds with the other atoms. This is the outermost shell and is known as  valence shell, and the electrons present in it are called the valence electrons.

The electrons are on the outermost energy level of the atom are called the valence electrons. These are the electrons that involved in the bonding and the chemical reactions. The other electrons are the  core electrons.

To learn more about electrons here

https://brainly.com/question/31179419

#SPJ4

Since the percentage yield exceeds 100%, the actual yield obtained exceeds the theoretical value. This can be the result of flawed experiments or insufficient replies.

The limiting reactant in the reaction between 3g of Hydrogen and 29g of Oxygen is hydrogen. Water formation can produce a maximum of 27 g. Five grammes of the reactant are still unreacted.

2Hydrogen + Oxygen → 2Water

moles of Hydrogen = mass / molar mass = 40 g / 2.016 g/mol = 19.84 mol

moles of Water = moles of Hydrogen / 2 = 19.84 mol / 2 = 9.92 mol

The molar mass of water is 18.015 g/mol, so the mass of water produced can be calculated as follows:

mass of Water = moles of Water × molar mass = 9.92 mol × 18.015 g/mol = 178.6 g

Therefore, the theoretical yield of water is 178.6 g.

The percentage yield can be calculated as follows:

% yield = (actual yield / theoretical yield) × 100%

% yield = (234 g / 178.6 g) × 100% = 131%

To know more about percentage yield visit:-

https://brainly.com/question/30579872

#SPJ9

1.63atm is the required pressure of the given gas.

To calculate the pressure of gas using the ideal gas law, we need to use the formula:

PV = nRT

where:

First, we need to calculate the number of moles of CO2 using the given mass and molar mass:

n = m/M

where:

m = mass of CO2 = 2.89 g

M = molar mass of CO2 = 44.01 g/mol

n = 2.89 g / 44.01 g/mol = 0.0657 mol

Next, we can plug in the values into the ideal gas law and solve for pressure (P):

PV = nRT

P = nRT / V

P = (0.0657 mol) (0.08206 L·atm/mol·K) (255.22 K) / 9.60 L

P = 1.63 atm

Therefore, the pressure of the gas is 1.63 atm.

Learn more on ideal gas law here:https://brainly.com/question/25290815

#SPJ1

cola has a ph of about 3.0. if a cola has a concentration of h2co3 of 0.005m then the concentration of HCO- ions is 1.58 x 10-4 M.

The given information is that a cola has a pH of about 3.0 and its H2CO3 concentration is 0.005M.

We have to determine the concentration of HCO- ions.

Given below is the balanced equation for the dissociation of carbonic acid

(H2CO3):H2CO3 → H+ + HCO- 

pKa = 6.4 The dissociation constant, Ka can be calculated from the pKa as shown below:

Ka = 10(-pKa)Ka = 10(-6.4)Ka = 2.51 x 10-7

Now, we can write the equation for the ionization of H2CO3 as shown below:

H2CO3 + H2O → H3O+ + HCO3- 

Here, the equilibrium constant, Ka can be defined as shown below:

Ka = [H3O+] [HCO3-] / [H2CO3]

Now, we can substitute the equilibrium concentrations in the above equation as shown below:

2.51 x 10-7 = [x] [x] / [0.005 - x]

On solving this equation, we get the value of x as 1.58 x 10-4 M.

Therefore, the concentration of HCO- ions is 1.58 x 10-4 M.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11

The relative abundance of each isotope in the mixture and the isotopic mass of each isotope determines the average atomic mass of an element.

The average masses of the atoms of beryllium and fluorine are found in the attachment.

The average atomic mass of lithium is 6.9418 amu.

The average atomic mass of lithium is obtained from the isotopic mass and relative abundance of the two isotopes of lithium.

Isotopic mass of lithium-6 = 6.015 amu

Isotopic mass of lithium-7 = 7.016 amu

To calculate the average atomic mass, we use the formula:

average atomic mass = [(isotopic mass of isotope 1 x number of atoms of isotope 1) + ( isotopic mass of isotope 2 x number of atoms of isotope 2)] / total number of atoms

Substituting the values:

average atomic mass of lithium = [(6.015 amu x 3) + (7.016 amu x 2)] / 5

average atomic mass = 6.9418 amu

Learn more about the average atomic mass of an element at: brainly.com/question/30587714

#SPJ1

Complete question:

1. What are the factors that affect the average atomic mass of a mixture of isotopes?

2. Beryllium (Be) and Fluorine (F) have only one stable isotope. Use the periodic table to complete the following table of the average atomic mass of one atom, two atoms, and three atoms of the isotopes

4. Lithium has only two stable isotopes. Use the sim to determine the following:

a. Atomic mass of lithium-6 = amu

b. Atomic mass of lithium-7= amu

c. Average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms = amu