Answer:
Green Bean Casserole is a classic.
The family recipe has passed down from one great-aunt to another.
Now it's causing gas and bloating across multiple generations of the family.
Explanation:
Can to you do this for me please
Answer: It is homozygous recessive for blue eyes.
Explanation: If an individual has blue eyes, it means that they must have received two recessive alleles for eye color (bb) – one from each parent. Therefore, the genotype of an individual with blue eyes is homozygous recessive for blue eyes.
Coal is mined from several locations in the US, such as the San Juan Basin of northwestern New Mexico. This fossil fuel formed
A.
from the burial and decomposition of plant material.
B.
as a product of photosynthesis.
C.
as a byproduct of landfill waste.
D.
from molten rock deep in the Earth's interior.
Answer: A from the burial and decomposition of plant material.
Explanation:
A solution has a volume of 250 mL and has the molarity of 2.4 M NaCl. How many moles of NaCl are in the solution?
There are 0.6 moles of sodium chloride in a 250 mL solution with a molarity of 2.4 M sodium chloride.
In 250 mL of a 0.5 M NaCl solution, how many moles of sodium chloride are there?This leads us to the conclusion that a 250 mL solution of a 0.5 M sodium chloride contains 0.125 moles and 7.32 grammes of sodium chloride, respectively.
250 mL of a 0.4 M solution contains how many moles of sodium chloride?A solution with a concentration of 0.4 M contains 0.4 moles of solute per litre of solution. By utilising dimensional analysis, you may calculate how many moles of solute are present in 250 mL of the solution. litre and millilitre units
To know more about sodium chloride visit:-
https://brainly.com/question/9811771
#SPJ1
ENTHALPHY LAB QUESTIONS!!
PURPOSE OF EXPERIMENT: To find Heat of Solution of sodium hydroxide and to find the heat of neutralization between sodium hydroxide and hydrochloric acid.
Experiment 1 Procedure:
1. Measure 50.0 mL of water (tap) into a 100 mL graduated cylinder and pour it into a large coffee cup.
2. Determine the temperature of this water
3. Measure out 2.00 g of sodium hydroxide into a piece of paper towel *tare scale!
4. Add the sodium hydroxide to the water in the coffee cup and put a small cup over it, with the thermometer through the hole. Stir GENTLY with the thermometer and record the temperature every 30 seconds for 3 minutes or until it peaks. Record this in a properly labelled table.
5. Let this stand for 45 minutes before proceeding to Exp. 2.
WHAT WE FOUND IN EXP 1:
T (temp.) initial = 20 degrees C
T (temp) FINAL = 28.5 degrees C
moles of sodium hydroxide = 0.0518mol
the molar mass of sodium hydroxide = 39.969g/mol
C (specific heat of water) = 4.184J/g degrees C
THE NUMBER OF TRIALS FOR TEMP IN EXP 1
1st trial = 21 C
2nd trial = 24.5 C
3rd trial = 26 C
4th trial = 26 C
5th trial = 28 C
6th trial = 28.5 C
7th trial = 28.5 C (final temp)
ANALYSIS FOR EXPERIMENT ONE:
1. Determine the moles of sodium hydroxide (NaOH) from the experiment.
2. Determine Qsurroundings and Qrxn
3. Determine the enthalpy for the dissociation of sodium hydroxide (delta H sol)
4. Write the thermochemical equation for the dissociation of sodium hydroxide TWO ways and write an enthalpy diagram
5. What assumptions did you make to calculate #2? (some example assumptions to make: assume that the solution is water and that heat and density COULD be the same as water, etc)
6. Research the actual value and determine the percent error
7. In terms of bonds breaking and forming, what is RESPONSIBLE FOR ENTHALPY CHANGE?
EXPERIMENT 2 PROCEDURE:
1. Measure out 50.0 mL of 0.75 concentration M HCl into a graduated cylinder
2. Measure and record the temperature of the sodium hydroxide solution from exp. 1.
3. Add the hydrochloric acid solution to the sodium hydroxide solution, put the small cup on, and record the temperature change every 15 seconds for 1 minute. Stir GENTLY. Record this in a properly labelled table (will be given below)
4. Solutions can be discarded down the sink.
WHAT WE FOUND IN EXP. 2:
T (temp) initial = 23.5 C
T (temp) FINAL = 27 C
THE NUMBER OF TRIALS FOR TEMP IN EXP 2
1st trial = 27 C
2nd trial = 27 C
3rd trial = 27 C
4th trial = 27 C (FINAL TEMP)
ANALYSIS FOR EXPERIMENT 2:
1. Determine the moles of HCl added to this mixture
2. Write the chemical equation for this reaction
3. Determine the limiting reagent
4. Determine the Qsurr and Qrxn *CONVERT TO kJ*
5. Determine the enthalpy for the neutralization reaction.
6. Write the thermochemical equation for the dissociation of sodium hydroxide TWO WAYS and write an enthalpy diagram
7. Research the actual value and determine the percent error.
8 Explain sources of experimental error for both experiments and BE SPECIFIC! (NOT CALCULATION ERRORS, SPILLING, OR LOSING REACTANTS - DO NOT COUNT AS ERRORS! They can be EXPERIMENTAL due to heat loss/gain, room temp *specific heat capacity is for 25 C*, and atmospheric pressure is constant. And they can be MEASUREMENTS - consider the precision and the potential range of error for each measurement)
9. In terms of bonds breaking and forming, what's responsible for the enthalpy change?
CONCLUSION: write a brief statement that refers to the purpose.
In Experiment 1, we found the heat of solution of sodium hydroxide (NaOH) by dissolving 2.00 g of NaOH in 50.0 mL of water.
What was observed in the experiment?The temperature rose from 20°C to 28.5°C. The moles of NaOH were determined to be 0.0518 mol.
Using the specific heat of water (4.184 J/g°C), we calculated the enthalpy change (ΔH_sol) and compared it to the literature value, finding a percent error.
In Experiment 2, we measured the heat of neutralization between NaOH and 0.75 M HCl.
The temperature increased from 23.5°C to 27°C. We determined the moles of HCl, limiting reagent, and enthalpy change (ΔH_neut) for the neutralization reaction.
The actual value was compared to the literature value, and percent error was calculated.
Experimental errors in both experiments could arise from heat loss/gain, variations in room temperature and atmospheric pressure, and imprecise measurements.
The enthalpy changes in both experiments are due to bond breaking and forming during the dissociation of NaOH and the neutralization reaction between NaOH and HCl.
In conclusion, we determined the heat of solution for sodium hydroxide and the heat of neutralization between sodium hydroxide and hydrochloric acid, and analyzed the possible sources of experimental errors.
Read more about enthalpy here:
https://brainly.com/question/16985375
#SPJ1
How many grams of O2 will forms when 4.6 molesof lead II oxide decomposes?
The correct answer is To answer this question, we need to use the balanced chemical equation for the decomposition of lead(II) oxide (PbO).
[tex]PbO(s) → Pb(s) + O2(g)[/tex]From this equation, we can see that for every 1 mole of PbO that decomposes, 1 mole of O2 is produced. Therefore, we can use the given number of moles of PbO to determine the number of moles of O2 produced, and then convert to grams using the molar mass of O2 We are given 4.6 moles of PbO, so we can calculate the moles of O2 produced as follows: moles of O2 = moles of PbO moles of O2 = 4.6 moles Now, we can use the molar mass of O2 to convert from moles to grams: mass of O2 = moles of O2 x molar mass of O2 mass of O2 = 4.6 moles x 32.00 g/mol mass of O2 = 147.2 g Therefore, when 4.6 moles of PbO decompose, 147.2 grams of O2 are produced. It's important to note that the given reaction assumes that the lead(II) oxide decomposes completely, meaning that all of the PbO is converted to Pb and O2. In reality, some of the PbO may not decompose completely, and other side reactions may occur. However, assuming complete decomposition, the calculated mass of O2 represents the theoretical yield of the reaction.
To learn more about decomposition click on the link below:
brainly.com/question/8009068
#SPJ1
What would be the destiny (in g/L) of a sample of C2H2Cl2 gas at 70.0C and 2.50 atm of pressure
The density of the gas would be 9.01 g/L.
To calculate the density (in g/L) of a gas, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
To solve for n/V (the number of moles of gas per unit volume), we can rearrange the ideal gas law:
n/V = P/RT
The density (in g/L) is then equal to the molar mass (in g/mol) times n/V:
density = (molar mass) * (n/V)
The molar mass of C₂H₂Cl₂ is:
2(12.01 g/mol) + 2(1.01 g/mol) + 2(35.45 g/mol) = 96.93 g/mol
To use the ideal gas law, we need to convert the temperature to Kelvin:
70.0C + 273.15 = 343.15 K
Plugging in the values:
P = 2.50 atm
V = unknown (we are not given the volume)
n/V = P/RT = 2.50 atm / (0.08206 Latm/(molK) * 343.15 K) = 0.0930 mol/L
molar mass = 96.93 g/mol
Therefore, the density of the C₂H₂Cl₂ gas at 70.0C and 2.50 atm of pressure is:
density = (molar mass) * (n/V) = 96.93 g/mol * 0.0930 mol/L = 9.01 g/L.
Learn more about density here:
https://brainly.com/question/15164682
#SPJ1
how many moles of carbon atoms are there in 0.388 mole of c2h6?
The chemical formula for C2H6 tells us that there are two carbon atoms in each molecule of ethane. Therefore, to find the number of moles of carbon atoms in 0.388 moles of C2H6, we can use the following steps:
1. Determine the total number of moles of carbon atoms in 0.388 moles of C2H6 by multiplying the number of moles of C2H6 by the number of carbon atoms per molecule:
0.388 moles C2H6 x 2 moles C / 1 mole C2H6 = 0.776 moles C
2. Round the result to the appropriate number of significant figures, if necessary.
Therefore, there are 0.776 moles of carbon atoms in 0.388 moles of C2H
Need help on 9 and 10
a) The balanced chemical equation is: 2Al + 3ZnCl₂ → 2AlCl₃ + 3Zn. To determine the number of moles of ZnCl₂ required, we need to first calculate the number of moles of Al using its molar mass:
molar mass of Al = 26.98 g/mol
moles of Al = 17.8 g / 26.98 g/mol = 0.660 mol
According to the balanced equation, 2 moles of Al react with 3 moles of ZnCl₂. Therefore, we can use a proportion to find the number of moles of ZnCl₂:
0.660 mol Al / 2 mol Al = x mol ZnCl₂ / 3 mol ZnCl₂
x mol ZnCl₂ = (0.660 mol Al × 3 mol ZnCl₂) / 2 mol Al = 0.990 mol ZnCl₂
Therefore, 0.990 moles of ZnCl₂ are required.
b) From the balanced equation, we see that 2 moles of Al produce 2 moles of AlCl₃ and 3 moles of Zn. We can use the molar masses of the products to calculate the amount of each product produced:
molar mass of AlCl₃ = 133.34 g/mol
moles of AlCl₃ produced = 2 mol Al × (133.34 g/mol) / (26.98 g/mol) = 9.88 mol AlCl₃
molar mass of Zn = 65.38 g/mol
moles of Zn produced = 3 mol Zn × (65.38 g/mol) / (1 mol Zn) = 196.14 g Zn / 65.38 g/mol = 3.00 mol Zn
Therefore, 9.88 moles of AlCl₃ and 3.00 moles of Zn are produced.
c) The balanced chemical equation is: Fe₂O₃ + 3CO → 2Fe + 3CO₂
To determine the number of moles of CO needed to react with 4.00 kg of Fe₂O₃, we need to first convert the mass of Fe₂O₃ to moles using its molar mass:
molar mass of Fe₂O₃ = 159.69 g/mol
moles of Fe₂O₃ = 4.00 kg / (1000 g/kg) / 159.69 g/mol = 0.0250 mol
According to the balanced equation, 3 moles of CO react with 1 mole of Fe₂O₃. Therefore, we can use a proportion to find the number of moles of CO:
0.0250 mol Fe₂O₃ / 1 mol Fe₂O₃ = x mol CO / 3 mol CO
x mol CO = 0.0250 mol Fe₂O₃ × 3 mol CO / 1 mol Fe₂O₃ = 0.0750 mol CO
Therefore, 0.0750 moles of CO are needed.
To know more about molar masses, visit:
https://brainly.com/question/22997914
#SPJ1
help me i am trying to pass
Question
A bird is soaring at a constant height above the ground.
Which statement best explains this observation?
Responses
A:The force of gravity does not apply to objects above the surface
:B The bird is light enough so that it is not affected by gravitvt
C :The flapping of a bird's wings allows gravity to pass through its body.
D :The upward force on the bird is balanced by the downward force of gravity.
Pls help me in this question in chemistry parts 6_10_11_13
Answer:
i am adding solution with attachment
Explanation:
Is “Does eating less fat increase a mouse’s life span” a good scientific question?
B. Imagine that the food coloring is a type of atom. Based on your observations, how does the concept of Brownian motion help to explain what you observed?
Answer:
observed?Brownian motion is the random movement of particles suspended in a fluid due to collisions with other molecules in the fluid. In this case, the food coloring molecules are suspended in the water, which is a fluid, and the random movement of the water molecules causes the food coloring molecules to move around in a random pattern. This movement is similar to the movement of atoms in a gas or liquid, which is also driven by Brownian motion. So, the concept of Brownian motion helps to explain the random movement of the food coloring molecules in the water, as observed in the experiment.
Arif decided to make a model of the global wind patterns on Earth. He draws arrows of the global winds that move in a circular pattern from the equator to the poles and back again. Explain what causes global winds to form. Why do they move in convection currents around Earth?
Global winds form due to differential heating of the Earth's surface by the sun, creating convection currents in the atmosphere, which are influenced by the rotation of the Earth, resulting in circular wind patterns around the planet.
What causes global winds to form and why do they move in convection currents around Earth?
Global winds are caused by the differential heating of the Earth's surface by the sun. The sun heats the Earth's surface unevenly due to the varying angles of incidence of the sun's rays and the Earth's curvature. The equator receives more direct sunlight than the poles, which creates a temperature difference between these regions. This temperature difference causes the air to move from the equator to the poles, creating convection currents in the atmosphere.
These convection currents create global wind patterns that move in a circular pattern from the equator to the poles and back again. As the warm air rises near the equator, it moves towards the poles, where it cools and sinks back down to the surface. The cooler air near the poles then moves towards the equator to replace the rising warm air.
These wind patterns are also influenced by the rotation of the Earth, which causes the Coriolis effect. The Coriolis effect causes wind to deflect to the right in the Northern-Hemisphere and to the far left in the Southern-Hemisphere.This deflection results in the formation of the trade winds, westerlies, and polar easterlies that are part of the global wind patterns.
In summary, the differential heating of the Earth's surface by the sun causes convection currents in the atmosphere, which create the global wind patterns. The rotation of the Earth influences these wind patterns, resulting in the formation of the trade winds, westerlies, and polar easterlies that move in a circular pattern from the equator to the poles and back again.
To learn more about Global winds, visit: https://brainly.com/question/29404140
#SPJ1
Analyse the step-by-step of guiding students on how to write balanced chemical equations and ionic equation
Here is a step-by-step guide for guiding students on how to write balanced chemical equations and ionic equations:
Steps:
1. Determine the reactants and products: Start by identifying the reactants and products in the chemical reaction. This involves reading the problem and identifying the substances that are being reacted.
2. Write the unbalanced equation: Once the reactants and products have been identified, write the unbalanced chemical equation using the chemical formulas for each reactant and product.
3. Balance the equation: To balance the equation, adjust the coefficients of the reactants and products so that the number of atoms of each element is equal on both sides of the equation. Begin by balancing the atoms of elements that appear only once on each side of the equation, and then move on to elements that appear more than once.
4. Check the balanced equation: After balancing the equation, double-check to make sure that the number of atoms of each element is the same on both sides of the equation.
5. Write the ionic equation: To write the ionic equation, break apart any soluble ionic compounds into their individual ions. Then, cancel out any spectator ions that appear on both sides of the equation.
6. Check the ionic equation: Double-check the ionic equation to make sure that the same number and type of ions appear on both sides of the equation.
7. (Optional) Include states of matter: It is common practice to include the states of matter (solid, liquid, gas, aqueous) of the reactants and products in the chemical equation. This can be done by using abbreviations in parentheses after each chemical formula.
By following these steps, students can learn how to write balanced chemical equations and ionic equations accurately and efficiently.
To know more about ionic equations, visit:
https://brainly.com/question/29299745
#SPJ1
In order to produce an electric current in a coil of wire, a magnetic field through the coil must be
A) positive
B) moving
C) negative
D) neutralized
i need a lab report! anyone have the chart with what they wrote and the answers to the lab report. Lab: Ionic and Covalent Bonds Write a lab report for this lesson’s lab. Be sure that your report: includes all major elements of a lab report. meets your teacher’s content and format expectations. is clearly organized and formatted. demonstrates strong scientific reasoning and writing.
Ionic and Covalent Bonds- The materials utilized during the experiment, the steps taken, and the techniques used to analyze the results should all be described in the section titled "Materials and Methods."
How do you write a chemistry lab report?A lab report is broken down into eight sections: title, abstract, introduction, techniques and materials, results, discussion, conclusion, and references. The title of the lab document must be descriptive of the scan and replicate what the scan analyzed.
What are ionic and covalent compounds in chemistry lab?Ionic bonds require an electron donor, the metal, and an electron accepter, the non-metal. Covalent bonding is the sharing of electrons between atoms. This kind of bonding happens between two of the equal element or elements shut to each other in the periodic table.
To learn more about Covalent Bonds here:
brainly.com/question/19382448
#SPJ9
Gaseous carbon monoxide reacts with hydrogen gas to form gaseous methane (CH4) and oxygen gas
The reaction requires a stoichiometric ratio of [tex]2:4[/tex] for carbon monoxide to hydrogen gas, resulting in the formation of methane and oxygen gas as products.
What is the balanced chemical equation?The balanced chemical equation for the reaction between gaseous carbon monoxide [tex](CO)[/tex] and hydrogen gas [tex](H_2)[/tex] to form gaseous methane [tex](CH_4)[/tex] and oxygen gas [tex](O_2)[/tex] is:
[tex]2CO(g) + 4H2(g) \rightarrow CH4(g) + O2(g)[/tex]
In this equation, [tex]2[/tex] moles of carbon monoxide react with [tex]4[/tex] moles of hydrogen gas to produce 1 mole of methane and [tex]1[/tex] mole of oxygen gas.
Therefore, The reaction requires a stoichiometric ratio of [tex]2:4[/tex] for carbon monoxide to hydrogen gas, resulting in the formation of methane and oxygen gas as products.
Learn more about equation here:
https://brainly.com/question/30087623
#SPJ1
I NEED ASAPPP
How many moles of bromine gas would occupy a volume of 20 L at a pressure of .90 atm and a temperature of 90°C? Show all work.
R= 8.31 L kPa/K mol
1 atm=101.3kPa
0.0652 moles of bromine gas would occupy a volume of 20 L at a pressure of 0.90 atm and a temperature of 90°C.
To solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:
T = 90°C + 273.15 = 363.15 K
Next, we need to convert the pressure from atm to kPa:
0.90 atm x 101.3 kPa/atm = 91.17 kPa
Now we can plug in the values we have:
n = (PV) / (RT)
n = (91.17 kPa x 20 L) / (8.31 L kPa/K mol x 363.15 K)
n = 0.0652 mol.
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ1
calculate molarity of 8×10^-3 moles of HCl dissolved in 25cm³ of water.
[tex]Molarity = \frac{Moles(solute)}{Volume(solution)}[/tex]
Volume = 25cm³ = 25mL = 0.025 LMolarity = 8x10⁻³/0.025Molarity = 0.32M★ I hope it helps you :)........
If you start with 1.953 g of salicylic acid what is the theoretical yield of aspirin?
To calculate the theoretical yield of aspirin, we need to know the balanced equation for the reaction between salicylic acid and acetic anhydride, which is:
salicylic acid + acetic anhydride → aspirin + acetic acid
The balanced equation tells us that one mole of salicylic acid reacts with one mole of acetic anhydride to produce one mole of aspirin and one mole of acetic acid.
The molar mass of salicylic acid is 138.12 g/mol, so 1.953 g is equal to:
1.953 g / 138.12 g/mol = 0.01414 mol salicylic acid
According to the balanced equation, one mole of salicylic acid produces one mole of aspirin. The molar mass of aspirin is 180.16 g/mol, so the theoretical yield of aspirin is:
0.01414 mol aspirin × 180.16 g/mol = 2.55 g aspirin
Therefore, the theoretical yield of aspirin from 1.953 g of salicylic acid is 2.55 g.
What is an acid ?An acid is a chemical compound or substance that can donate hydrogen ions (H+) or accept electrons in chemical reactions, or a substance that can lower the pH of a solution by releasing H+ ions. Acids have a sour taste and can react with bases to form salts. They are commonly used in industries such as food, pharmaceuticals, and chemical manufacturing. Examples of common acids include hydrochloric acid, sulfuric acid, and acetic acid.
To know more about acid visit :
https://brainly.com/question/14072179
#SPJ1
How do mitosis and meiosis differ
Answer:Mitosis is the process in which a single cell divides to form two identical cells, while meiosis is a type of cell division that results in four daughter cells with half the number of chromosomes as the parent cell.
Explanation:
2 FeCl3 + 3 Pb(NO3)3 -> 2 Fe(NO3)3 + 3 PbCl₂
How many mol of Fe(NO3)3 will be produced by using 1.5 mol of Pb(NO3)3?
What are the common reducing agent
Answer: might be lack of taste, education, and good manners
Explanation:
fill in the blanks
water is a......
Water is a tiny molecule.
it consists of three atoms : two of hydrogen and one of oxygen. Water molecules cling to each other because of a force called hydrogen bonding.
Formic acid has a Ka of 1.77*10^-4. To 55.0 mL of 0.25 M solution 75.0 of 0.12 M NaOH is added . What is the resulting pH.
Answer:
The first step is to determine the moles of formic acid and NaOH that react. moles of formic acid = (0.25 mol/L) x (0.055 L) = 0.01375 mol moles of NaOH = (0.12 mol/L) x (0.075 L) = 0.009 mol Since NaOH is a strong base, it will react completely with formic acid to form sodium formate and water: HCOOH + NaOH → HCOONa + H2O The limiting reagent in this case is NaOH, so all of it will be consumed in the reaction. The amount of excess formic acid that remains can be calculated: moles of HCOOH remaining = moles of HCOOH initial - moles of NaOH used moles of HCOOH
Which of the following would BEST describe an acid with a pH of 1?
Since it has a large concentration of hydrogen ions (H+) and a low concentration of hydroxide ions, an acid with a pH of 1 would be categorised as a strong acid. (OH-).
Is a pH of one corrosive strong?At the kinds of amounts you typically use in the lab, strong acids like hydrochloric acid have a pH between 0 and 1. At a quantity of 38%, hydrochloric acid (HCL) has a pH value of 1.1.
What is HCl's pH?Muriatic acid is another name for hydrochloric acid. It has an unpleasant scent and is colorless. As an acidifying substance, it is employed. Since it is a powerful acid, its pH will be lower than 7. There is a pH spectrum of 1.5 to 3.5.
To know more about hydrogen ions visit:-
https://brainly.com/question/7641960
#SPJ1
how electrons remain in pairs form however they contain similar charge
The charge of electrons is determined by their spin, which is either up or down and the same spin will repel each other due to their negative charge, while electrons with opposite spins will attract each other.
Electrons are negatively charged particles and exist in pairs because of the Pauli Exclusion Principle, which states that no two electrons in an atom can have the same set of quantum numbers. This means that if two electrons are in the same atom, they must have different energy levels, angular momenta, and magnetic moments. This prevents the electrons from occupying the same space and prevents them from having the same charge. As a result, electrons remain in pairs, even though they have the same charge.
To learn more about electrons click here https://brainly.com/question/28977387
#SPJ1
What is the molarity of 30.0 mL of hydrochloric acid solution after 15.0 mL of a 3.00 M solution has been diluted?
___ M (Answer Format X.X)
Answer:
the resulting solution is 1.5 M.
Explanation:
To solve this problem, we can use the dilution formula:
M1V1 = M2V2
where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.
We are given that 15.0 mL of a 3.00 M hydrochloric acid solution has been diluted, and we want to find the molarity of the resulting solution. Let's use M1 for the initial concentration, V1 for the initial volume, M2 for the final concentration, and V2 for the final volume.
M1 = 3.00 M
V1 = 15.0 mL
V2 = 30.0 mL (since 15.0 mL has been diluted to 30.0 mL, the final volume is 30.0 mL)
We can rearrange the dilution formula to solve for M2:
M2 = (M1V1) / V2
Substituting the given values, we get:
M2 = (3.00 M x 15.0 mL) / 30.0 mL
M2 = 1.50 M
Therefore, the molarity of the resulting solution is 1.5 M.
How much is evolved/absorbed (answer is ______ ) when 444 g of NBr3 is produced?
The amount of energy evolved/absorbed when 444 grams of NBr₃ is produced is 38.5 KJ
How do i determine the energy evolved/absorbed?First, we shall determine the number of mole in 444 grams of NBr₃. Details below:
Mass of CaCl₂ = 444 grams Molar mass of NBr₃ = 253.719 g/mol Mole of NBr₃ =?Mole = mass / molar mass
Mole of NBr₃ = 444 / 253.719
Mole of NBr₃ = 1.75 mole
Finally, we shall determine the energy evolved/absorbed. Details below:
N₂ + 3Br₂ -> 2NBr₃ + 44 KJ
From the balanced equation above,
When 2 moles of NBr₃ were produced, 44 KJ of heat energy were absorbed.
Therefore,
When 1.75 moles of NBr₃ is produced, = (1.75 × 44) / 2 = 38.5 KJ of heat is absorbed.
Thus, the heat energy absorbed is 38.5 KJ
Learn more about heat energy absorbed:
https://brainly.com/question/29224546
#SPJ1
We wish to
determine how
many moles of
barium sulfate
form when 50.0
mL of 0.250 M
aluminum
mol Al₂(SO),
Resources
sulfate reacts
with excess
barium nitrate.
3Ba(NO3)2(aq) + Al₂(SO4)3(aq)
How many
moles of
Al₂(SO4)3 are
present
in 50.0 mL of
0.250 M
Al₂(SO4)3?
Enter
Help
To determine the number of moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃, we need to use the formula relating molarity to moles and volume.
What is a mole and how do you calculate the moles of Al₂(SO₄)₃ present?In chemistry, a mole is a unit of measurement used to show the measure of a chemical entity. One mole of a substance is defined as the amount of that substance that contains the same number of particles, such as atoms, molecules, or ions, as there are atoms in exactly 12 grams of carbon-12.
To determine the number of moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃ , we need to use the formula:
Molarity (M) = moles (n) / volume (V)
Rearranging the formula, we get:
n= M*V
First, let's convert the volume of 50.0 mL to liters:
50.0 mL = 50.0 x 10⁻³ L
Next, we can substitute the given values into the formula:
moles of Al₂(SO₄)₃ = 0.250 M x 50.0 x 10⁻³ L
moles of Al₂(SO₄)₃ = 0.0125 mol
Therefore, there are 0.0125 moles of Al₂(SO₄)₃ present in 50.0 mL of 0.250 M Al₂(SO₄)₃.
Learn more about moles here:
https://brainly.com/question/26416088
#SPJ1