what is the ph of 0.352 m ethylammonium chloride, c2h5nh3cl. the kb of ethylamine, c2h5nh2, is 4.3 x 10-4.

A Cu-Ni alloy is slowly cooled to 1250oC. Both liquid and solid coexist. If the amount of liquid is 71%, determine the overall composition of the alloy (in wt % Ni).The overall composition of the alloy (in wt% Ni) can be found using the lever rule.

For this, we need to use the following formula: mass fraction of solid / mass fraction of liquid = (composition of liquid - composition of solid) / (composition of solid - composition of liquid) Here, we know that the amount of liquid is 71%. Therefore, the amount of solid is 100 - 71 = 29%.

Hence, mass fraction of solid = 29 / 100 = 0.29mass fraction of liquid = 71 / 100 = 0.71Now, let us assume that the composition of Ni in the solid state is x, and the composition of Ni in the liquid state is y. Therefore, the overall composition of the alloy (in wt % Ni) will be: x (0.29) + y (0.71) = (x - y) (0.71 - 0.29) => 0.29 x + 0.71 y = 0.42 x - 0.42 y => 0.71 y + 0.42 y = 0.42 x - 0.29 x => 1.13 y = 0.13 x => y = 0.115 x.

Therefore, the overall composition of the alloy (in wt % Ni) is: x (0.29) + y (0.71) = x (0.29) + 0.115 x (0.71) => 0.29 x + 0.08 x = 0.37 x = 0.29 => x = 0.783 wt % Ni (approx.)Therefore, the overall composition of the alloy (in wt % Ni) is 0.783%.

To know more about Alloy refer here:

https://brainly.com/question/1759694#

#SPJ11

Answer: covalent networks

Answer: For a solution treated aluminum alloy, the aging needed to achieve a yield strength of 400 MPa would be 20 minutes.

What is solution heat treatment?

Solution heat treatment is a procedure used to dissolve a metal's alloying components in a solid solution. Solution heat treatment is used in the production of a homogeneous, single-phase microstructure that is free of precipitates or undissolved alloying components.

It is also known as homogenization in the metallurgical industry. The procedure generally involves heating the metal to a high temperature for an extended period of time, followed by rapid quenching or cooling to room temperature to freeze the solid solution in place.

What is the aging of alloys?

Aging of alloys is a post-heat treatment procedure in which an alloy is heated at a certain temperature and held for a certain length of time to promote the formation of precipitates in the metal.

This is the final heat treatment in the production of many metal alloys, and it can help to boost their strength and toughness by allowing the formation of a highly ordered and dispersed precipitate structure that resists dislocation movement and grain boundary migration. Precipitation hardening is another name for aging.



Learn more about electric field here:

https://brainly.com/question/5749278#


#SPJ11

The pH of the solution with a hydronium ion concentration of 6.3 × 10⁻¹² M is 11.20.

What is pH?

The acidity of a substance is measured by its pH, which is a measure of its acidity or alkalinity. The pH scale is a logarithmic scale ranging from 0 to 14, with a neutral pH of 7.

A substance with a pH less than 7 is acidic, while one with a pH greater than 7 is basic. A pH of 7 is considered neutral; any pH value below 7 indicates acidity, and any pH value above 7 indicates basicity.

The formula to determine the pH of a substance is as follows:

pH = - log10 [H+], where[H+] refers to the concentration of hydronium ions in the substance.

In the case of this question, the pH of the solution can be determined using the formula:

pH = -log10(6.3 × 10⁻¹²) = 11.20

Hence, the pH of the solution with hydronium ion concentration of 6.3 x 10-12 M is 11.20.



Learn more about ph level here:

https://brainly.com/question/1458045#

#SPJ11

correct option is a. acetal. Fully reacting an aldehyde with alcohol will produce an acetal.

Acetals are organic compounds that have the general formula R2C (OR ') 2, where R and R' are alkyl groups. An acetal is formed by the reaction of an aldehyde with two equivalents of alcohol under acidic or basic conditions.

What is the reaction between aldehydes and alcohols?

The reaction of an aldehyde with alcohol produces an acetal. This reaction requires the presence of an acid catalyst to convert the alcohol to its corresponding alkoxide, which then reacts with the carbonyl group of the aldehyde to form the acetal.

In the reaction, the carbonyl group is transformed into an ether, and the alcohol is transformed into an ether. The reaction equation is:

Aldehyde + Alcohol + Acid → Acetal + Water

Therefore, the correct option is a) An acetal.

To learn more about aldehyde and ketone refer - https://brainly.com/question/29756072

#SPJ11

The balanced equation for combustion of C3H8 with O2 is:

C3H8 + 5O2 → 3CO2 + 4H2O. the correct answer is option. d.

From equation, it can be seen that 1 mole of C3H8 reacts with 5 moles of O2. Given that 8 moles of O2 were present, this is in excess of required amount, so all of the C3H8 will react completely.

Therefore, 5 moles of O2 will be used up in the reaction, leaving 3 moles of O2 remaining. The molar percent of O2 remaining can be calculated as follows: Molar percent of O2 remaining = (3 moles O2 / 8 moles total) x 100% = 37.5% . Therefore, answer is closest to option (d) 30 mol %.

To know more about combustion, here

brainly.com/question/15117038

#SPJ4

CsI  (cesium iodide) is expected to have a more negative enthalpy of solution compared to LiF (lithium fluoride), assuming the same solvent is used and the solvent-solute interactions are the same in both cases.

The enthalpy of solution is the energy released or absorbed when a solute dissolves in a solvent. The enthalpy of solution is negative if energy is released when the solute dissolves, indicating that the solution is exothermic.

CsI is expected to have a more negative enthalpy of solution compared to LiF because CsI has larger ions with a higher charge than LiF, and larger ions with higher charge tend to have stronger interactions with solvent molecules, leading to a more negative enthalpy of solution.

Learn about enthalpy here https://brainly.com/question/3836944

#SPJ1

The molecular shape is determined by the number of electron domains around a central atom where an electron domain can be a lone pair, a single bond, or a multiple bond.

The molecular geometry is determined by the type and number of electron domains on the central atom. The electron domain geometry is determined by the number of electron domains around the central atom.

Both the electron and molecular geometry of a compound can be identified using the VSEPR theory (Valence Shell Electron Pair Repulsion). The molecular geometry is determined by the type and number of electron domains on the central atom.

The electron domain geometry is determined by the number of electron domains around the central atom. Electron domains are regions of space around the central atom that contain an electron pair. When lone pairs or multiple bonds are present, these domains are also counted.

The electron domain geometry is the term used to describe the shape of the molecule based on the number of electron domains present on the central atom.

To know more about electrons, refer here:

https://brainly.com/question/29731362#

#SPJ11

The vapor pressure above the solution is 80.7 torr.

To calculate the vapor pressure above the solution, we can use Raoult's law, which states that the vapor pressure of a solution is equal to the mole fraction of each component multiplied by its vapor pressure in pure state.

Assuming that methanol and ethanol behave ideally and have vapor pressures of 96.0 and 44.9 torr at their pure states, respectively, we can calculate the total vapor pressure above the solution as follows:

Calculate the total number of moles of solute (methanol and ethanol) in the solution:

4.54 mol methanol + 1.95 mol ethanol = 6.49 mol solute

Calculate mole fraction of each component in solution:

Mole fraction of methanol = 4.54 mol / 6.49 mol = 0.700

Mole fraction of ethanol = 1.95 mol / 6.49 mol = 0.300

Use Raoult's law to calculate the vapor pressure above the solution:

Vapor pressure above solution = (mole fraction of methanol x vapor pressure of methanol) + (mole fraction of ethanol x vapor pressure of ethanol)

Vapor pressure above solution = (0.700 x 96.0 torr) + (0.300 x 44.9 torr)

Vapor pressure above solution = 67.2 torr + 13.5 torr

Vapor pressure above solution = 80.7 torr

To know more about vapor pressure here

https://brainly.com/question/11864750

#SPJ4

Carbon and other types of matter can move through the environment through a combination of physical, biological, and human processes.

Matter, including carbon, can move through an environment in several ways, including:

Diffusion: Diffusion is the movement of particles from an area of high concentration to an area of low concentration. Carbon can diffuse through the air or water from areas where it is more concentrated to areas where it is less concentrated.

Advection: Advection is the movement of matter due to the flow of a fluid, such as air or water. Carbon can be transported through the environment by advection, for example, by wind carrying carbon particles or by water currents transporting dissolved carbon.

Biogeochemical cycling: Carbon can also be cycled through the environment by biological and geological processes. Plants and algae take up carbon dioxide from the air or dissolved carbon from water and convert it into organic matter through photosynthesis. This organic matter can then be consumed by other organisms, leading to the transfer of carbon through the food chain. Carbon can also be stored in soils and sediments for long periods of time.

Human activities: Human activities can also move carbon through the environment. For example, the burning of fossil fuels releases carbon dioxide into the atmosphere, which can then be transported by diffusion and advection. Land-use changes, such as deforestation, can also affect the cycling of carbon through the environment.

Learn more about matter here: https://brainly.com/question/3998772

#SPJ1

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

The mole fraction of sodium hypochlorite is 0.012.

To find the mole fraction of sodium hypochlorite (NaClO) in the solution, we need to first calculate the total number of moles of solute (NaClO) and solvent (water) in the solution.

Let's assume 1 L of solution. The number of moles of NaClO in the solution is equal to the concentration of NaClO multiplied by the volume of the solution:

moles of solute = concentration × volume = 0.650 mol/L × 1 L = 0.650 moles

Next, find the volume of the solute in the solution by multiplying the number of moles by its molar mass and dividing it buy its density.

volume of solute = number of moles x molar mass x density = 0.650 moles(74.44 g/mol) / ( 1.206 g/mL) = 40.121 mL

Therefore, there are 40.121 mL of solute in 1 liter of solution. Hence, the volume of water is:

volume of water = 1000 mL - 40.121 mL = 959.879 mL

Using the density of water and its molar mass, find the number of moles of water.

moles of water = 959.879 m(1 g/mL) / (18 g/mol) = 53.327 mol

Therefore, 1 liter of solution contains 0.650 moles of NaClO and 53.327 moles water. The mole fraction (χ) of NaClO is defined as the number of moles of NaClO divided by the total number of moles in the solution. Solving for the mole fraction of NaClO, we get:

mole fraction = 0.650 moles / (0.650 moles + 53.327 moles) = 0.012

Learn more about mole fraction here: https://brainly.com/question/14783710.

#SPJ11

Formation and dissociation constants are related in that they are inverses of each other and must have a product that equals the equilibrium constant of the reaction.

Formation and dissociation constants, also known as Kf and Kd respectively, represent the equilibrium concentrations of the reactants and products in a chemical reaction.

Kf is the constant of formation, which is the product of the concentrations of the products of the reaction, divided by the product of the concentrations of the reactants.

Kd is the dissociation constant, which is the product of the concentrations of the reactants, divided by the product of the concentrations of the products .

Kf and Kd are related in that the product of Kf and Kd must equal Kw, which is the equilibrium constant for the reaction.

The value of Kw is constant, meaning that regardless of the equilibrium concentrations of reactants and products, Kf and Kd must be inverses of each other such that the product of Kf and Kd must equal Kw.

Therefore, formation and dissociation constants are related in that they are inverses of each other and must have a product that equals the equilibrium constant of the reaction.

to know more about dissociation constants refer here:

https://brainly.com/question/28197409#

#SPJ11

The density of the metal is 1.167 g/ml.

The density of the metal can be calculated using the formula for density, ρ:

ρ = m /v

where ρ is the density, m is the mass, and v is the volume.

In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.

Using the formula, the density of the metal is then:

ρ = 31.5 g / 27mL

ρ = 1.167 g/ml

This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

The interaction between the water and sodium ions and the water and bicarbonate ions is called a neutralization reaction.

In a chemical reaction, one or more substances (reactants) are changed into one or more new substances (products).

In this case, the reactants are the sodium ions, water, and bicarbonate ions, and the products are sodium bicarbonate, carbon dioxide, and water.

The chemical reaction that occurs when sodium ions and bicarbonate ions combine in water is a neutralization reaction. A neutralization reaction occurs when an acid and a base react together to form a salt and water.

In this reaction, the sodium ions (which act as a base) react with the bicarbonate ions (which act as an acid) to form sodium bicarbonate and water. As a result of this reaction, carbon dioxide is also released.

The reaction can be written as: Na+ + HCO3- → NaHCO3 + H2O + CO2

The interaction between the water and sodium ions and the water and bicarbonate ions is a chemical reaction called a neutralization reaction.

This reaction results in the formation of sodium bicarbonate, water, and carbon dioxide.

to know more about neutralization reaction refer here:

https://brainly.com/question/28970253#

#SPJ11

Answer: The electron configuration of a ground-state Cu atom is 1s22s22p63s23p64s13d10.

What is the electron configuration?

The electron configuration of an element indicates how its electrons are distributed in atomic orbitals. For each electron in an atom, the electron configuration describes the energy level, sublevel, and spin state. There are different techniques to determine the electron configuration of a ground-state Cu atom.

Here, we are going to follow the aufbau principle to find it. The Aufbau principle is a principle in which electrons are placed into the lowest available energy level. The following is the electron configuration of a ground-state Cu atom:1s22s22p63s23p64s13d10

Note: The ground state is when an atom has its electrons at their lowest possible energy levels. All electrons in an atom tend to be in the lowest energy orbitals possible to achieve the most stable configuration.

Learn more about Aufbau principle here:

https://brainly.com/question/13393709#



#SPJ11

The correct answer is C. Silicon and Germanium are semiconductor elements. A semiconductor is a material that has properties of both an insulator and a conductor.

It can be used to create transistors, which are components that can be used to amplify or switch electronic signals.

Semiconductor elements are made up of different atoms that have at least four electrons in their outer shell. The four electrons are what gives them their semi-conductive properties.

Silicon and Germanium are two of the most common semiconductor elements.

Silicon is the most widely used semiconductor element. It has four electrons in its outer shell and is found in nature as a component of sand and quartz.

Silicon has the ability to easily form bonds with other atoms, which makes it a great choice for semiconductor devices.

Germanium is also a commonly used semiconductor element. It has four electrons in its outer shell and is a component of coal and many other minerals.

Germanium has a slightly higher electron mobility than Silicon, which makes it better suited for certain types of transistors.

In conclusion, Silicon and Germanium are semiconductor elements. They have four electrons in their outer shell and are used in transistors and other semiconductor devices.

Silicon is the most widely used semiconductor element due to its ability to form strong bonds with other atoms, while Germanium is better suited for certain types of transistors due to its higher electron mobility.

to know more about semiconductor refer here:

https://brainly.com/question/15184439#

#SPJ11

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

The unit of measurement for a surface area that has degrees Fahrenheit as the height and time as the width would be square degrees Fahrenheit x time.

Surface area is a measurement of the total area that the surface of an object occupies. The surface area is measured in square units. If the surface of an object is rectangular or square, it is calculated by multiplying the length of the object by the width of the object. For the curved surfaces, the formula for the surface area is complicated. However, the concept of square units remains the same for curved surfaces.

Fahrenheit is a unit of temperature that is used to measure the temperature of an object. This is used primarily in the United States and other countries that have adopted the Imperial system of units. It is based on a scale of 180 degrees between the freezing and boiling points of water, where the freezing point is 32°F and the boiling point is 212°F.

To learn more about Fahrenheit; https://brainly.com/question/30391112

#SPJ11

Answer:

They increase the reaction rate by acting as catalysts.

Explanation:

To determine the number of atoms in 15.0 grams of calcium, we need to calculate the molar mass of calcium.

The molar mass of calcium is 40.08 g/mol. This means that for every 1 mole of calcium, there are 40.08 grams. Since we have 15.0 grams of calcium, we can divide this by the molar mass to find the number of moles of calcium. 15.0 g / 40.08 g/mol = 0.37 moles of calcium. To find the number of atoms in 15.0 grams of calcium, we need to multiply the number of moles of calcium by Avogadro's number. 0.37 moles x 6.022 x 1023 atoms/mol = 2.223 x 1023 atoms of calcium.

Therefore, there are 2.223 x 1023 atoms of calcium in 15.0 grams of calcium.

For more questions on molar mass

https://brainly.com/question/21334167

#SPJ11

The given statement "The electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded . two species with the same electron-domain geometry may have different molecular geometries" is true as the molecular geometry is  arrangement of the bonded atoms.

Electron-domain geometry is the arrangement of the electron pairs around the central atom in the molecule. It is  called as the molecular geometry or called the electron-pair geometry.

The Molecular geometry is also known as molecular structure, and is the three -dimensional structure or the arrangement of the atoms in the molecule. The statement is true.

To learn more about geometry here

https://brainly.com/question/18612295

#SPJ4

Acetaldehyde (CH3CHO) is a polar molecule due to its asymmetric shape and presence of polar covalent bonds.

The polarity is caused by the oxygen-hydrogen bond dipoles, as oxygen has a greater electronegativity than the hydrogen. This causes the oxygen to attract the electrons from the bond, creating a net dipole.

Acetaldehyde is a polar molecule. The polar character of a molecule is determined by the shape and polarity of its bonds. When the molecule has polar bonds and an asymmetrical shape, it is said to be polar. On the other hand, if it has no polar bonds or symmetrical shape, it is nonpolar.

Acetaldehyde is a polar molecule due to the electronegativity difference between carbon and oxygen, which creates a polar bond. It also has an asymmetrical shape due to the presence of two electronegative oxygen atoms on either side of the central carbon atom. As a result, acetaldehyde is soluble in polar solvents like water, ethanol, and acetone.

Read more about carcinogenic :

https://brainly.com/question/984334

#SPJ11

The quickest production of H₂ gas can be achieved by carrying out the reaction at a temperature near the boiling point of water which is 100° Celsius.

For the quickest production of H₂ gas, the reaction should be done at a higher temperature. This is because as temperature increases, the kinetic energy of the particles increases, leading to higher reaction rate. As the reaction rate increases, it leads to an increased rate of H₂ gas production. Therefore, the reaction should be done at a higher temperature to achieve quicker production of H₂ gas which is the boiling point of water.

The rate at which reactants change into products is known as the rate of reaction or reaction rate. It goes without saying that the rate at which chemical reactions take place varies greatly. While certain chemical reactions occur almost instantly, others typically take time to achieve their final equilibrium.

For instance, because it happens quickly, wood burning has a high reaction rate, whereas iron rusting has a low reaction rate because it happens gradually.

To know more about Boiling Point, visit:

https://brainly.com/question/2153588

#SPJ1

In valence bond theory,

covalent

bonds are described in terms of the overlap of atomic or hybrid orbitals. This statement is true. Covalent bonds are described in terms of the overlap of atomic or hybrid orbitals

A covalent bond is a chemical bond that arises from the mutual sharing of electrons between atoms. It is formed when two atoms share a pair of electrons, with each atom contributing one electron to the pair.

In valence bond theory, covalent bonds are explained by the overlap of atomic or hybrid orbitals.

Orbitals

are regions of space around an atomic nucleus where an electron is most likely to be found.

An atomic orbital can hold a maximum of two electrons with opposite spins. Each atom has a certain number of valence electrons in its outermost shell.

These valence electrons can participate in the formation of chemical bonds.

During the formation of a covalent bond, the valence orbitals of the two atoms overlap with each other, allowing their valence

electrons

to interact and form a shared electron pair.

The degree of overlap between the atomic orbitals determines the strength of the covalent bond. The greater the overlap, the stronger the bond. The shape of the orbitals also affects the type of bond that is formed.

For example, when two s orbitals overlap, a sigma bond is formed, while when two p orbitals overlap, a pi bond is formed.

In hybrid orbitals, the orbitals of different shapes and energies can combine to form a new set of orbitals that are better suited for bonding.

In valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. This theory explains how atoms bond with each other and form new molecules.

to know more about

covalent

refer here:

https://brainly.com/question/30261436#

#SPJ11

Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.

1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.

To learn more about picric acid; https://brainly.com/question/14866072

#SPJ11

The mass percent concentration of the obtained ammonia solution is approximately 0.00833%.

To determine the mass percent concentration of an ammonia solution, we need to know the mass of ammonia present in the solution and the total mass of the solution.

In this case, we are given that 11.2 dm3 of NH3 gas, as measured in normal conditions (which is equivalent to 0.0112 m3), were dissolved in 100 cm3 of water. To calculate the mass of ammonia present in the solution, we first need to calculate the number of moles of NH3 using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming standard temperature and pressure (STP), we can use a pressure of 1 atm and a temperature of 273 K, giving us:

[tex]$n = \frac{PV}{RT}[/tex]

[tex]= \frac{(1 \text{ atm} * 0.0112 \text{ m}^3)}{(0.08206 \text{ L atm/mol K} * 273 \text{ K})} = 0.000489 \text{ mol}$[/tex]

The molar mass of NH3 is 17.03 g/mol, so the mass of NH3 present in the solution is:

mass NH3 = n * molar mass

= 0.000489 mol * 17.03 g/mol

= 0.00833 g

To calculate the mass percent concentration, we divide the mass of NH3 by the total mass of the solution (which is the mass of NH3 plus the mass of water):

mass percent concentration = [tex]\frac{mass,NH_3}{total,mass} \times 100%$[/tex]

The mass of water is equal to its volume times its density, which is approximately 1 g/cm3:

mass water = [tex]100\text{ cm}^3 * 1\text{ g/cm}^3 = 100\text{ g}$[/tex]

Therefore, the total mass of the solution is:

total mass = mass NH3 + mass water = 0.00833 g + 100 g = 100.00833 g

Substituting these values, we get:

mass percent concentration = [tex]\frac{0.00833 \text{ g}}{100.00833 \text{ g}} \times 100%[/tex]

= 0.00833%

To learn more about ammonia solution

https://brainly.com/question/18688514

#SPJ4

The true statement given about the bonding electrons is option b. "The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly".

Carbon dioxide is a linear molecule that consists of two oxygen atoms and one carbon atom. The C-O bond in [tex]CO_2[/tex] is polar, which means that the electrons are shared unequally between the atoms. As oxygen is more electronegative than carbon, it attracts the electrons more strongly, and hence, the bonding electrons spend more time around the O atom than the C atom.

In other words, option b is the correct statement about the bonding electrons in carbon dioxide ([tex]CO_2[/tex]) molecule.

Thus bonding electron spends more time around the O atom as it attracts the electrons more strongly than the C atom.

Therefore correct option is b. The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly.

To learn more about bonding refer to: https://brainly.com/question/30004630

#SPJ11

A solution with eggs has a [H⁺] of 1×10⁻⁸ M is basic in nature which has more pH of 8  which is slightly alkaline, but still considered neutral.

In chemistry, a solution is a homogeneous mixture of two or more substances in relative amounts that can be varied constantly up to the limit of solubility. The term "solution" refers to the liquid state of matter, but solutions of gases and solids are also conceivable. For example, air is a solution made up primarily of oxygen and nitrogen, with trace quantities of several other gases, whereas brass is a solution made up of copper and zinc. The liquid in a solution is known as the solvent, and the substance introduced is known as the solute. If both components are liquids, the difference becomes meaningless; the one with the lower concentration is likely to be referred to as the solute. Any component's percentage in a solution can vary.

pH is directly proportional to hydrogen ion concentration.

To know more about solution ,visit ;

brainly.com/question/30665317

#SPJ1

A solution with eggs has a [H⁺] of 1×10⁻⁸ M is basic in nature which has more pH of 8  which is slightly alkaline, but still considered neutral. The correct option is B.

For more information on pH kindly visit to

https://brainly.com/question/15289714

#SPJ1

Complete question:

A solution with eggs has a [H+] of 1×10−8 M.

Which type of solution is this?

Responses

A. ionic

B. basic

C. acidic

D. neutral

NADH is produced during the catabolic reactions of glycolysis, the Krebs cycle, and oxidative phosphorylation in the mitochondria.

NADH (Nicotinamide adenine dinucleotide) is an important molecule involved in cellular respiration and energy production. The production of NADH is dependent on the availability of oxygen and glucose, which serve as electron acceptors in these metabolic pathways.

However, under anaerobic conditions where oxygen is limited or unavailable, such as during intense exercise or in some microorganisms, NADH production may still occur through fermentation pathways. In these pathways, pyruvate is converted to lactate or ethanol, regenerating NAD+ to allow for further ATP production through glycolysis.

Learn more on chemical equilibrium here: https://brainly.com/question/5081082

#SPJ1