what is the ph of a solution which is 0.1426 m in nh3 and 0.1291 m in nh4br common ion effect

1-61.11 ml of the 18 M solution is required to prepare 550 ml of a 2.0 M solution.

2-0.117 liters or 117 ml of the 1.5 M solution is required to prepare 25 ml of a 7.0 M solution.

To calculate the volume of concentrated 18 M solution required to prepare 550 ml of a 2.0 M solution, we can use the formula:

M1V1 = M2V2

where:

M1 = 18 M (concentration of concentrated solution)

V1 = volume of concentrated solution to be added (unknown)

M2 = 2.0 M (final concentration required)

V2 = 550 ml (final volume required)

Rearranging the formula to solve for V1:

V1 = (M2 x V2) / M1

Substituting the values given:

V1 = (2.0 M x 550 ml) / 18 M

V1 = 61.11 ml

To calculate the volume of concentrated 1.5 M solution required to prepare 25 ml of a 7.0 M solution, we can again use the formula:

M1V1 = M2V2

where:

M1 = 1.5 M (concentration of concentrated solution)

V1 = volume of concentrated solution to be added (unknown)

M2 = 7.0 M (final concentration required)

V2 = 25 ml (final volume required)

Converting the final volume required to liters:

V2 = 25 ml = 0.025 L

Rearranging the formula to solve for V1:

V1 = (M2 x V2) / M1

Substituting the values given:

V1 = (7.0 M x 0.025 L) / 1.5 M

V1 = 0.117 L

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ1

We get the dark blue color precipitate which contains  [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution when 6 M Na OH is added.

When the 6M Na OH is used instead of the NH3 in a solution then [tex]Cu^{2+}[/tex]ions will be precipitate out as the [tex]Cu(OH)_{2}[/tex]  in the solution. When the NH3 is used the [tex]Cu^{2+}[/tex] ions will form a complex with the NH3 in the solution which can be expressed as,

[tex]Cu^{2+}[/tex] + [tex]4NH_{3}[/tex] ----> [[tex]Cu(NH3)4]^{2+}[/tex] (aq.) + 2[tex]OH^{-}[/tex](aq.)

The complex of the [tex]Cu^{2+}[/tex]  is soluble which gives dark blue color to the solution.

Therefore by using the 6 M Na OH we can get the blue precipitate of the  [tex]Cu(OH)_{2}[/tex] . Precipitation is defined as the process of transforming a dissolved substance of the solution into an insoluble solid. The solid formed is called the precipitate of the solution.

and by using the NH3 we can get the dark blue color of the solution that contains  [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution.

To learn more about Precipitate

https://brainly.com/question/30764379

#SPJ4

The correct question is,

Instead of conc. NH3 being added to the solution, 6 M Na OH is added (both are bases). How will this affect the test for the identification of copper(II) ion in the solution. Explain

The transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.

Transition state in a chemical reaction can be referred to as a molecular configuration that describes the point of maximum energy in the reaction path during which the bonds that are involved in the chemical reaction are in a state of change.

Transition state theory provides detailed explanations of the reaction rates and reaction mechanisms occurring in the gas phase.

The reaction mechanism in question is a substitution reaction in which the hydroxyl ion attacks the alkyl halide, resulting in the creation of an intermediate complex.

The complex is created in a transition state involving the transfer of a negatively charged ion, which will lead to a new bond forming with the incoming nucleophile.

In conclusion, the transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.

To know more about transition state refer to-

brainly.com/question/30259181#

#SPJ11

When Muhammad died, his followers carried on the new religion. Islam prospered and grew under the Caliph Abu-Bakr and those who followed him. What cities became hubs of Muslim thought and power? How did word of this new religion spread? Did it appeal to people outside the Arabian Peninsula?

Explanation:

The final volume of the gas is approximately 7.97 L. This type of process is often represented on a pressure-volume (PV) diagram as a horizontal line, where the pressure is constant and the volume changes.

What is Constant Pressure?

Constant pressure refers to a thermodynamic process where the pressure of the system remains constant throughout the process. This means that if a gas is undergoing a constant pressure process, its pressure will remain the same, but its volume, temperature, and other properties may change. In a constant pressure process, the system can exchange heat with its surroundings, but the pressure remains constant.

We can use Charles's Law to solve this problem, which states that at constant pressure, the volume of an ideal gas is directly proportional to its temperature in Kelvin.

We can set up a proportion:

(V₁/T₁) = (V₂/T₂)

where V₁ is the initial volume (5.31 L), T₁ is the initial temperature (200 K), V₂ is the final volume (what we want to find), and T₂ is the final temperature (300 K).

Solving for V₂:

V₂ = (V₁/T₁) x T₂

V₂ = (5.31 L / 200 K) x 300 K

V₂ = 7.965 L

Learn more about Constant Pressure from the given link

https://brainly.com/question/1480756

#SPJ1

The given statement {When 7.5 x 10^-4 g of KOH is dissolved in 1.00 L of 1.0 x 10^-10 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed} is True. This is because the Ksp of Cu(OH)2 (2.2 x 10^-20) is exceeded, leading to the formation of a precipitate. So the answer is true.

When 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-10 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. This statement is true.

The equation is given below:

Cu(NO3)2 + 2KOH → Cu(OH)2 + 2KNO3, the given Ksp value for Cu(OH)2 is 2.2 x 10-20.

Molarity of Cu(NO3)2 is given by:

M = (1.0 x 10-10 mol/L) = moles of solute/L of solution= n/1.0 L1.0 x 10-10 = n/1.0 n = 1.0 x 10-10 mol

Amount of KOH is given by: Molarity of KOH = moles of solute/L of solution M = 7.5 x 10-4 g/(56.11 g/mol)/1.0 L= 1.336 x 10-5 mol/L, the balanced equation shows that the ratio of Cu(NO3)2 to KOH is 1:2.

Thus, moles of KOH = 2 x moles of Cu(NO3)2. Hence moles of Cu(NO3)2 = 1.0 x 10-10 mol/L x 1.0 L = 1.0 x 10-10 mol.

Moles of KOH = 2 x 1.0 x 10-10 mol = 2.0 x 10-10 mol.

Now we have the amount of both Cu(NO3)2 and KOH used in the reaction. The Ksp of Cu(OH)2 is given as 2.2 x 10-20.

The formula of Ksp is;

Ksp = [Cu2+][OH-]2Cu2+ and OH- are produced in a 1:2 molar ratio according to the balanced equation.

Therefore, [Cu2+] = 1.0 x 10-10 mol/L and [OH-] = 2 x 2.0 x 10-10 mol/L = 4.0 x 10-10 mol/L.

The value of Ksp is calculated as follows:

Ksp = [Cu2+][OH-]2= (1.0 x 10-10 mol/L)(4.0 x 10-10 mol/L)2= 1.6 x 10-28 mol3/L3.

This Ksp value is less than the given Ksp of Cu(OH)2 (2.2 x 10-20), which implies that a precipitate of Cu(OH)2 will form, and the statement is true.

For more questions on: KOH

https://brainly.com/question/31213916

#SPJ11  

the pH of the given solution is 2.

pH is a measure of the acidity or alkalinity of a solution, and is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in the solution. pH values range from 0 to 14, with a pH of 7 being neutral, a pH below 7 being acidic, and a pH above 7 being alkaline or basic.

A low pH value indicates a high concentration of hydrogen ions, which makes the solution acidic. A high pH value indicates a low concentration of hydrogen ions, which makes the solution basic. The pH scale is commonly used in many fields, including chemistry, biology, environmental science, and medicine, to describe and quantify the acidity or alkalinity of a solution.
The pH of a solution with a hydronium ion concentration of 0.01 mole per liter can be calculated using the formula:

pH = -log[H3O+]

where [H3O+] is the concentration of hydronium ions in moles per liter.

Substituting the given value, we get:

pH = -log(0.01)

Using a calculator, we get:

pH = 2

Therefore, the pH of the given solution is 2.

To know more about pH go through:-

https://brainly.com/question/172153

#SPJ4

Smog is a result of the interaction between different pollutants, it does not belong to the major classes of outdoor pollutants.

Let me briefly explain each major class of outdoor pollutant:

1. Carbon oxides: This group includes carbon monoxide (CO) and carbon dioxide (CO2). Carbon monoxide is a toxic gas produced by the incomplete combustion of fuels, while carbon dioxide is a greenhouse gas released from various human activities like the burning of fossil fuels.

2. Suspended particles: These are tiny solid or liquid particles suspended in the air, also known as particulate matter (PM). They can be emitted from various sources like construction activities, vehicle emissions, and industrial processes. Suspended particles can cause respiratory issues and other health problems.

3. Nitrogen oxides: This group includes nitrogen dioxide (NO2) and nitric oxide (NO), which are mainly emitted from vehicle exhausts and industrial processes. Nitrogen oxides contribute to the formation of smog, acid rain, and can cause respiratory problems.

4. Sulfur oxides: Sulfur dioxide (SO2) is the primary sulfur oxide, and it is released from burning fossil fuels, especially coal and oil, and from industrial processes. Sulfur oxides contribute to the formation of acid rain and can also cause respiratory problems.

for more questions on Smog :

https://brainly.com/question/2540988

#SPJ11

The standard deviation and per cent relative standard deviation, which represent the uncertainty in the molarity of your EDTA titrant.

To calculate the uncertainty in the molarity of your EDTA titrant, we need some information about the measurements taken during the titration process. However, since the information is not provided, I will give you a general step-by-step guide to finding the uncertainty in molarity:
1. Record the volume measurements (in mL) for each titration trial.
2. Calculate the molarity of the EDTA titrant for each trial using the balanced equation of the reaction and the known molarity and volume of the analyte solution.
3. Find the mean (average) molarity of the EDTA titrant by summing the molarities calculated in step 2 and dividing by the total number of trials.
4. Calculate the deviation for each trial by subtracting the mean molarity from the molarity of each trial.
5. Square each deviation calculated in step 4.
6. Sum the squared deviations and divide by the total number of trials minus one (n-1) to find the variance.
7. Calculate the standard deviation by taking the square root of the variance.
8. Calculate the per cent relative standard deviation by dividing the standard deviation by the mean molarity and multiplying by 100.
After following these steps, you will have found the standard deviation and per cent relative standard deviation, which represents the uncertainty in the molarity of your EDTA titrant.

For more such questions on EDTA titrant.

brainly.com/question/30667405

#SPJ11

The molarity of the HCl sample is 1.0 M.

In a titration, the moles of acid are equal to the moles of base at the equivalence point.

We can use this principle to calculate the molarity of the acid (HCl) from the volume and concentration of the base (NaOH) used in the titration.

First, we need to calculate the number of moles of NaOH used in the titration:

moles of NaOH = M x V = 0.20 M x 0.025 L = 0.005 mol

Since NaOH and HCl react in a 1:1 molar ratio, the number of moles of HCl present in the sample is also 0.005 mol.

Now we can calculate the molarity of HCl using the number of moles and the volume of the HCl sample used in the titration:

molarity of HCl = moles of HCl / volume of HCl sample

molarity of HCl = 0.005 mol / 0.005 L

molarity of HCl = 1.0 M

For more question on molarity click on

https://brainly.com/question/14469428

#SPJ11

To determine the number of moles of reactants required to produce 6.2 moles of phosphoric acid (H₃PO₄), we need to use stoichiometry.

From the balanced equation, we can see that 1 mole of P₄O₁₀ reacts with 6 moles of H₂O to produce 4 moles of H₃PO₄. This means that the ratio of P₄O₁₀ to H₃PO₄ is 1:4, and the ratio of H₂O to H₃PO₄ is 6:4, or 3:2.

To find the number of moles of P₄O₁₀ required, we can set up a proportion:

1 mole P₄O₁₀ / 4 moles H₃PO₄ = x moles P₄O₁₀ / 6.2 moles H₃PO₄

Solving for x, we get:

x = (1 mole P₄O₁₀ / 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 1.55 moles P₄O₁₀

Therefore, 1.55 moles of P₄O₁₀ were required to produce 6.2 moles of H₃PO₄.

To find the number of moles of  H₂O required, we can set up a similar proportion:

6 moles  H₂O/ 4 moles H₃PO₄ = x moles  H₂O/ 6.2 moles H₃PO₄

Solving for x, we get:

x = (6 moles  H₂O/ 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 9.3 moles  H₂O

Therefore, 9.3 moles of  H₂O were required to produce 6.2 moles of H₃PO₄ (phosphoric acid).

Learn more about phosphoric acid here:

https://brainly.com/question/3700851

#SPJ1

Answer:

Explanation:

The ocean is a huge body of salt water that covers about 71 percent of Earth’s surface. The planet has one global ocean, though oceanographers and the countries of the world have traditionally divided it into four distinct regions: the Pacific, Atlantic, Indian, and Arctic oceans. Beginning in the 20th century, some oceanographers labeled the seas around Antarctica the Southern Ocean, and in 2021 National Geographic officially recognized this fifth ocean.

An estimated 97 percent of the world’s water is found in the ocean. Because of this, the ocean has a considerable impact on weather, temperature, and the food supply of humans and other organisms. Despite its size and impact on the lives of every organism on Earth, the ocean remains a mystery. More than 80 percent of the ocean has never been mapped, explored, or even seen by humans. A far greater percentage of the surfaces of the moon and the planet Mars has been mapped and studied than of our own ocean floor.

Although there is much more to learn, oceanographers have already made some amazing discoveries. For example, we know that the ocean contains towering mountain ranges and deep canyons, known as trenches, just like those on land. The peak of the world’s tallest mountain—Mount Everest in the Himalayas, measuring 8.84 kilometers (5.49 miles) high—would not even break the surface of the water if it was placed in the Pacific Ocean’s Mariana Trench or Philippine Trench, two of the deepest parts of the ocean.

The rate at which the water expands continues to increase until it reaches the freezing temperature of 0°C or 32°F.

When the temperature of ice-cold water is increased slightly, it undergoes a net contraction. In the case of water, the density of water is at a maximum at 4°C or 39°F. This implies that, as the temperature of water decreases, its density will increase until it reaches 4°C. As a result, the water will begin to expand again.

As a result, when the temperature of ice-cold water is increased slightly, it will undergo a net contraction.According to the Density Anomalies of Water experiment, as the temperature of water decreases, its density increases.

Water achieves its maximum density at 4°C or 39°F. When the temperature of water falls below 4°C, the water starts to expand. At this point, the water begins to freeze, causing a further expansion in volume.

To learn more about : temperature

https://brainly.com/question/4735135

#SPJ11

It is true that when 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-8 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. This is determined through the concept of Balanced chemical reaction.

The balanced chemical reaction can be written as,

2KOH(aq.) + [tex]Cu(NO_{3} )_{2}[/tex](aq.) ==> [tex]Cu(OH){2}[/tex](s) + [tex]2KNO_{3}[/tex](aq.)

moles KOH present can be calculated as,

   = 7.5x10-4 g x 1 mole/56.1 g

   = 1.33x10-5 moles KOH

   = 1.3x10-5 M OH-

moles[tex]Cu(NO_{3} )_{2}[/tex] present  can be calculated as,

          = 1.0x10-8 mole/L x 1 L

          = 1.0x10-8 moles Cu(NO3)2

          = 1x10-8 M Cu2+

[tex]Cu(OH){2}[/tex] (s) ==> Cu2+(aq.) + 2OH-(aq.)

Q = [Cu2+][OH-]2

Q = (1x10-8)(1.3x10-5)2

Q = 1.3x10-18

To learn more about balanced chemical reaction

https://brainly.com/question/26694427

#SPJ4

The correct question is,

When 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-8 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. True or False? (Ksp of Cu(OH)2 is 2.2 x 10-20).

The molarity of the HCl solution is approximately 0.390 M.

To find the molarity of the HCl solution, you can use the formula:

Molarity of acid(M2) x Volume of acid(V2) = Molarity of base(M1) x Volume of base(V1)

Molarity of acid(M2) = (Molarity of base(M1) x Volume of base(V1)) / Volume of acid(V2)

Therefore,

M1V1 = M2V2
where M1 and V1 are the molarity and volume of NaOH, and M2 and V2 are the molarity and volume of HCl.

Given:
M1 = 0.212 M (NaOH)
V1 = 25.0 mL (NaOH)
V2 = 13.6 mL (HCl)

You need to find M2 (molarity of HCl).

Step 1: Rearrange the formula to solve for M2:
M2 = (M1V1) / V2

Step 2: Plug in the given values:
M2 = (0.212 M * 25.0 mL) / 13.6 mL

Step 3: Calculate the result:
M2 ≈ 0.390 M

So, the molarity of the HCl solution is approximately 0.390 M.

Learn more about molarity here:

brainly.com/question/2817451

#SPJ11

The brass sample has 0.357 g of zinc.

The amount of inertia a body possesses and the resistance it provides to a change in its speed or position when a force is applied are measured by a body's mass, which is a fundamental attribute of matter. It is frequently used as a gauge for how much matter makes up a body and gives it weight in a gravitational field.

The chemical formula for the interaction of zinc with hydrochloric acid is as follows:

Zn(s) + 2HCl(aq) = ZnCl2(aq) + H2(g)

One mole of zinc interacts with two moles of hydrochloric acid to create one mole of hydrogen gas, as shown by the balancing chemical equation. As a result, the amount of zinc in the brass sample and the amount of hydrogen gas produced by the reaction are equal.

The ideal gas law can be used to determine how many moles of hydrogen gas were generated:

PV = nRT

where n is the number of moles, R is the gas constant, T is the temperature in Kelvin, and P is the total pressure of the gas.

Initially, we must adjust the hydrogen gas volume for the water vapor pressure. The gas's overall pressure is:

Total P = [tex]\rm P_ {H_2 }+ P_{H_2O}[/tex]

where  [tex]\rm P_ {H_2 } \ \texte{and }\ P_{H_2O}[/tex] are the partial pressures of hydrogen gas and water vapor, respectively.

P _H2O = 23.8 torr, as we know,

[tex]\rm P _{H_2[/tex] = [tex]\rm P_ {total[/tex] - [tex]\rm P _{H2O[/tex] = 772 torr – 23.8 torr= 748.2 torr.

Converting the volume to liters (L) and the pressure to atmospheres (atm):

P = 760 torr/atm / 748.2 torr = 0.984 atm

V=135 mL / 1000 mL/L = 0.135 L

The temperature must also be converted to Kelvin:

T = 25°C + 273.15 = 298.15 K

These values are substituted into the ideal gas law to find n.

n = PV/RT = (0.984 atm) × (0.135 L) / (0.08206 L·atm/mol·K) × (298.15 K) = 0.00547 mol H2.

When one mole of zinc interacts to create one mole of hydrogen gas, the brass sample also contains 0.00547 mol of zinc.

The molar mass of zinc (65.38 g/mol) can be used to calculate the mass of zinc in the brass sample.

mass of zinc = number of moles of zinc × molar mass of zinc

= 0.00547 mol × 65.38 g/mol

= 0.357 g

As a result, the brass sample has 0.357 g of zinc.

To know more about mass, visit:

brainly.com/question/19694949

#SPJ1

The molar mass corresponds to the chlorofluorocarbon CF3Cl (Freon-11), which has a molar mass of 137.37 g/mol. Therefore, the chlorofluorocarbon in the experiment is CF3Cl.

The rate of effusion of a gas through a porous barrier is inversely proportional to the square root of its molar mass. Therefore, we can use the rate of effusion to determine the relative molar mass of the two gases and identify which one is a chlorofluorocarbon.

The rate of effusion can be calculated using Graham's law:

Rate of effusion = Volume of gas / Time taken to effuse

For the chlorofluorocarbon, the rate of effusion is:

Rate of effusion (CFC) = 50 mL / 157 s = 0.3185 mL/s

For argon, the rate of effusion is:

Rate of effusion (Ar) = 50 mL / 76 s = 0.6579 mL/s

Using Graham's law, we can set up the following equation:

Rate of effusion (CFC) / Rate of effusion (Ar) = sqrt(Molar mass (Ar) / Molar mass (CFC))

Solving for the ratio of molar masses:

Molar mass (Ar) / Molar mass (CFC) = (Rate of effusion (Ar) / Rate of effusion (CFC))^2

Molar mass (Ar) / Molar mass (CFC) = (0.6579 mL/s / 0.3185 mL/s)^2

Molar mass (Ar) / Molar mass (CFC) = 4.294

Molar mass (CFC) = Molar mass (Ar) / 4.294

The molar mass of argon is 39.95 g/mol. Therefore, the molar mass of chlorofluorocarbon is:

Molar mass (CFC) = 39.95 g/mol / 4.294 = 9.30 g/mol

To learn more about molar mass

https://brainly.com/question/13152455

#SPJ4

Heat manufacturing is a feature of metabolism. Most of the warmth produced in the body is generated in the liver, brain, heart, and skeletal muscle mass all through exercise.

In our body, cellular respiration leads to formation of water, carbon dioxide and launch of energy. This energy is stored in the shape of ATP. Some structure of this strength is utilised in day by day things to do and the excess is launched in the form of heat.

Cooling Your Body

Convection happens when warmness is carried away from your body by means of shifting air. If the surrounding air is cooler than your skin, the air will absorb your heat and rise.

Learn more about human body here;

https://brainly.com/question/2844926

#SPJ9

the minimum mass of Mg(NO₃)₂ required to begin precipitation of MgF₂ is 6.37 × 10⁻³ g/L.

The balanced equation for the precipitation of MgF₂ from Mg(NO₃)₂ and HF is:

Mg(NO₃)₂ + 2HF → MgF₂(s) + 2HNO₃

The concentration of fluoride ions can be found using the equilibrium expression for the dissociation of HF:

HF + H₂O ⇌ H₃O⁺ + F⁻

Ka = [H₃O⁺][F⁻]/[HF]

Since the initial concentration of HF is 0.560 M, the concentration of [H₃O⁺] is negligible compared to [HF] because HF is a weak acid. Therefore, we can simplify the expression to:

Ka = [F⁻][HF]/[HF] = [F⁻]

[F⁻] = Ka = 7.2 × 10⁻⁴ M

Now we need to determine the minimum amount of Mg(NO₃)₂ required to provide enough fluoride ions to reach the saturation point of MgF₂.

Let's assume x moles of Mg(NO₃)₂ is added to 1.00 L of 0.560 M HF solution. This will result in the addition of 2x moles of F⁻ ions to the solution.

The molar solubility of MgF₂ is equal to the square root of Ksp because the stoichiometric coefficients are 1 for both MgF₂ and Mg(NO₃)₂.

Molar solubility of MgF₂ = sqrt(Ksp) = sqrt(7.4 × 10⁻⁹) = 8.6 × 10⁻⁵ M

To reach saturation, the concentration of F⁻ ions must be equal to the molar solubility of MgF₂. Therefore:

[F⁻] = 8.6 × 10⁻⁵ M = 2x moles/L

x = 4.3 × 10⁻⁵ moles/L

The mass of Mg(NO₃)₂ required is then:

mass = moles × molar mass = (4.3 × 10⁻⁵ mol/L) × (148.3 g/mol) = 6.37 × 10⁻³ g/L.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

A solutions that is highly reactive & consists ions— molecules or atoms that also have received or exchanged electrons—is an electrolyte solution.

Since the final cost on I equal the net cost on (ii), the electrolytic mixture is always neutral (iii). Unlike with the superconductor, the sodium chloride conducts the electrical charge by virtue of progression of its (iv). The characteristic that causes a metal to prefer to dissolve in positive charge is defined as (v).

Substances known as electrolytes show a natural positive or negative static electricity when submerged in water. Several body activities are supported by them, including controlling nuclear reactions or preserving overall proportion of liquids both inside and outside your cells.

To know more about electrons visit:

https://brainly.com/question/28977387

#SPJ1

Indoor cooking with biomass fuel is the major source of indoor air pollution in developing countries, causing health risks.

The significant wellspring of indoor air contamination in emerging nations is indoor cooking with biomass as a fuel. Biomass fills, like wood, charcoal, and creature waste, are regularly utilized for cooking and warming in many non-industrial nations. Be that as it may, consuming these powers delivers a scope of poisons very high, including particulate matter, carbon monoxide, and nitrogen oxides, which can have serious wellbeing impacts.

Toxic paints on furnishings and walls, tobacco smoke, manufactured materials in development of structures, and arrival of radon-222 gas are additionally wellsprings of indoor air contamination, yet they are not as predominant in that frame of mind as indoor cooking with biomass fuel. Resolving this issue through clean cooking arrangements and advancing the utilization of cleaner powers can essentially further develop indoor air quality and decrease wellbeing gambles in these districts.

To learn more about biomass, refer:

https://brainly.com/question/28217240

#SPJ4

The para-methyl group is not expected to strongly influence the electronic properties of the ring but may affect its steric accessibility to reacting species.

the substituents on an aromatic ring can have a tremendous influence on the reactivity and selectivity of reactions that involve the ring in the case of the three unique substituents you noted para-chloro para-methoxy para-methyl they will probable have exceptional penalties on the response primarily based on their digital and steric properties para-chloro chlorine is an electron-withdrawing group which ability it will pull electrons away from the ring making it a whole lot much less electron-rich and extra inclined to electrophilic assault this can make the ring extra reactive closer to electrophilic fragrant substitution EAS reactions which comprise the addition of an electrophile to the ring the presence of a chlorine substituent can additionally have an impact on the regioselectivity of the reaction favoring substitution at the para role para-methoxy methoxy -och₃ is an electron-donating team which ability it will donate electrons to the ring making it greater electron-rich and much less susceptible to electrophilic assault this can make the ring plenty much less reactive in the direction of EAS reactions on the other hand the methoxy group can moreover increase the nucleophilicity of the ring making it more inclined to nucleophilic aromatic substitution NAS reactions the presence of a methoxy substituent can additionally have an effect on the regioselectivity of the reaction favoring substitution at the ortho and para positions para-methyl methyl -ch₃ is a as a substitute inert substituent that ability it does not strongly have an effect on the electron density of the ring or its reactivity toward EAS or NAS reactions however the presence of a methyl crew can affect the steric properties of the ring making it higher or a whole lot less on hand to the reacting species relying on the special reaction stipulations

learn more about aromatic ring here : brainly.com/question/28286554

#SPJ4

Both Ba and Sr belong to the same group of elements in the periodic table Oxygen and selenium both belong to group 16 of the periodic table Nitrogen and arsenic belong to the same periodic table group of elements.

Ba and Sr both have two valence electrons in their outermost shell and belong to the same group of elements in the periodic table, the alkaline earth metal group.

This similarity in electron arrangement leads to similar chemical properties.

Nitrogen and arsenic belong to group 15 of the periodic table, also known as the nitrogen group. Both elements have five valence electrons in their outermost shell, and their shared electron arrangement contributes to similar chemical properties such as their ability to form compounds with three other atoms.

To know more about periodic table,visit:

https://brainly.com/question/11155928

#SPJ1

Answer: 499.2g of O2

Explanation:CO2 + O2 ---> CO2 +H20

From the equation, we know 1 mole of oxygen requires 1 mole of CO2 to react completely.

Therefore it is sure that 15.6 mole of CO2 requires 15.6 moles of O2

To convert moles of O2 to grams, we need to use the molar mass of O2

i.e. 32.00g/mol

the mass of O2 required is

15.6 moles *32.00 g/mol = 499.2g

Answer:

I think that the moon's rotation around the Earth shows us different parts of the moon

Explanation:

Answer:

The biggest clue to why the Moon always looks different when you look up at the sky is that it is constantly moving in relation to Earth and the Sun.

Explanation:

The pH of the solution prepared by adding 0.020 moles of Na₂HPO₄ and 0.010 moles of NaH₂PO₄ to 100.0 ml of water is found to be 7.51.

A solution is prepared by adding 0.020 moles of Na₂HPO₄ and 0.010 moles of NaH₂PO₄ to 100.0 ml of water.

The total H⁺ concentration of the solution will be given as,

H⁺= √(Ka₁C₁)+(Ka₂C₂)

C₁ and C₂ are the concentration of the two acids. The Ka₁ and Ka₂ are the standard values of the solution. Putting all the values in the above mentioned formula we will get the pH of the solution to be 7.51.

To know more about pH of the solution, visit,

https://brainly.com/question/172153

#SPJ4

The term absorbance is directly proportional to the concentration (c) of the solution which is used in the experiment of the spectra.

The absorbance is defined as the term which is said to be directly proportional to the length of the light path that is equal to the width of the cuvette. The relationship between concentration and absorbance can be explained by the Beer-Lambert law. This law relates the attenuation of light to the properties of a material. The Beer-Lambert law is defined as the law which states that the concentration of a chemical solution is directly proportional to its absorption of light.

The acid dissociation constants were determined in the spectra will be 2.97 pKa* and 9.47 pKa. The pKa and pKa* values are corresponded well with literature values of 9.45 and 3.0 with a 0.2 and 1.0% difference, respectively. This was determined that 2-naphthol is a weaker acid in the ground state than the excited state due to the value of  pKa > pKa.

To learn more about  absorbance

https://brainly.com/question/14919298

#SPJ4

Answer: The heat capacity of a bomb calorimeter is 500 J°C.