Answer: covalent networks
2 nh3 3 cuo g 3 cu n2 3 h2o in the above equation how many moles of water can be made when 84 moles of nh3 are consumed?
By using the stoichiometric ratio of the equation 2 NH3 + 3 CuO → 3 Cu + N2 + 3 H2O. when 84 moles of NH3 are consumed, 504 moles of H2O can be made.
Given the equation: 2 NH3 + 3 CuO → 3 Cu + N2 + 3 H2O
If 84 moles of NH3 are consumed, then:
Step 1:
Calculate the number of moles of CuO required for the reaction.
Using the stoichiometric ratio of the equation, the number of moles of CuO required for the reaction is (2 x 84 moles NH3) = 168 moles CuO.
Step 2:
Calculate the number of moles of H2O formed.
Using the stoichiometric ratio of the equation, the number of moles of H2O formed in the reaction is (3 x 168 moles CuO) = 504 moles H2O.
Therefore, when 84 moles of NH3 are consumed, 504 moles of H2O can be made.
For more such questions on stoichiometric ratio , Visit:
https://brainly.com/question/9413308
#SPJ11
what is the volume of 1.00 mole of H2
Answer:
22.414 [tex]dm^{3}[/tex] at S.T.P and 24 [tex]dm^{3}[/tex]
Explanation:
Volume of one mole of gas at standard temperature and pressure, stp, (0 °C, 1 atm) is 22.4 dm3. At room temperature and average pressure, rtp, the volume of any gas is approximately 24 dm3.
if a sample has 50 atoms of 87 rb and 50 atoms of sr, how many half-lives has the sample gone through?
Answer: If a sample has 50 atoms of 87Rb and 50 atoms of Sr, it has gone through the equivalent of 77.7 billion years in half-lives.
In order to answer this question, we need to know the half-lives of both 87Rb and Sr. The half-life of 87Rb is 48.8 billion years and the half-life of Sr is 28.9 billion years.
Therefore, the sample has gone through the equivalent of (50/50) x 48.8 billion years, or 48.8 billion years, of 87Rb's half-life.
It has also gone through (50/50) x 28.9 billion years, or 28.9 billion years, of Sr's half-life. In total, the sample has gone through the equivalent of 77.7 billion years in half-lives.
In summary, if a sample has 50 atoms of 87Rb and 50 atoms of Sr, it has gone through the equivalent of 77.7 billion years in half-lives.
Learn more about half lives here:
https://brainly.com/question/30599798#
#SPJ11
a student prepares a solution by combining 100 ml of 0.30 m hno2(aq) and 100 ml of 0.30 m kno2(aq). which of the following equations represents the reaction that best helps to explain why adding a few drops of 1.0 m hcl(aq) does not significantly change the ph of the solution?
The reaction that best explains why adding a few drops of 1.0 M HCl(aq) does not significantly change the pH of the solution is HNO₂aq) + H₂O(l) ⇌ H₃O+(aq) + NO₂-(aq)
When HNO₂ and KNO₂ are mixed, they undergo a dissociation reaction in which HNO₂ donates a proton to water and forms H₃O+ and NO₂-. This reaction produces a weakly acidic solution with a pH of approximately 3. Adding a few drops of 1.0 M HCl to the solution would result in the protonation of NO₂- ions, forming HNO₂, which would lower the pH of the solution.
However, since HNO₂ is already present in the solution, the added HCl would not significantly change the pH of the solution. This is because the additional HNO₂ formed from the reaction of HCl with NO₂- would be in equilibrium with the original HNO₂ in the solution, and the concentration of HNO₂ would not significantly change.
Therefore, the equilibrium equation for the dissociation of HNO₂ in water can best explain why adding a few drops of HCl does not significantly change the pH of the solution.
To know more about pH of the solution, refer here:
https://brainly.com/question/30332511#
#SPJ11
number of Li atoms in 4.5 mol of Li
if a student reacts 4.40 ml of acetic acid with 3.35 ml of isopentyl alcohol and obtains 3.25 ml of isopentyl acetate as the product, what was the percent yield
The percent yield of isopentyl acetate is 71.23% when reacting 4.4 ml f acetic acid with 3.35 ml of isopentyl alcohol
Percentage yield calculationPercentage yield can be defined as the ratio of the actual yield of a reaction to the theoretical yield of a reaction, multiplied by 100.
The percentage yield is calculated as follows:
Percentage yield = (actual yield/theoretical yield) × 100Given data:
Volume of acetic acid used = 4.40 ml
Volume of isopentyl alcohol used = 3.35 ml
Volume of isopentyl acetate obtained = 3.25 ml
Density of acetic acid = 1.049 g/mL and its molar mass = 60.05 g/mol
Density of isopentyl alcohol = 0.809 g/mL and its molar mass = 88.15 g/mol
Density of isopentyl acetate = 0.876 g/mL and its molar mass = 130.19 g/mol
The balanced chemical equation for the reaction is:
C5H11OH + CH3COOH → CH3COOC5H11 + H2O
First, we need to determine which reactant is the limiting reactant. We can do this by calculating the number of moles of each reactant:
Number of moles of acetic acid = (volume in mL) x (density) / (molar mass)Number of moles of acetic acid = (4.40 mL) x (1.049 g/mL) / (60.05 g/mol) = 0.0767 molNumber of moles of isopentyl alcohol = (volume in mL) x (density) / (molar mass)Number of moles of isopentyl alcohol = (3.35 mL) x (0.809 g/mL) / (88.15 g/mol) = 0.0307 molThe mole ratio of acetic acid to isopentyl alcohol in the reaction is 1:1, so the limiting reactant is isopentyl alcohol because there are fewer moles of it.
The theoretical yield of isopentyl acetate can be calculated from the number of moles of limiting reactant:
Number of moles of isopentyl acetate = (number of moles of limiting reactant) = 0.0307 molNow we can calculate the percent yield:
Percent yield = (actual yield / theoretical yield) x 100%The actual yield is given as 3.25 mL of isopentyl acetate, but we need to convert this to moles:
Number of moles of isopentyl acetate = (volume in mL) x (density) / (molar mass)Number of moles of isopentyl acetate = (3.25 mL) x (0.876 g/mL) / (130.19 g/mol) = 0.022 molPercent yield = (0.022 mol / 0.0307 mol) x 100% = 71.23%Therefore, the percent yield of isopentyl acetate is 71.23%.
learn about percentage yield
https://brainly.com/question/11963853
#SPJ11
which phase change will have a more dramatic increase in entropy? select the statement that best explains why.
Answer: Phase change from solid to gas will have a more dramatic increase in entropy.
This is because gas has the highest entropy of all phases. Gas has the highest entropy because its molecules are moving randomly, and it has the greatest amount of disorder. In addition, the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas. This results in a significant increase in entropy.
Phase transition refers to the process of changing from one phase of matter to another. When a substance changes from one phase to another, its entropy changes. Entropy refers to the degree of disorder or randomness in a system, and it is related to the number of ways that a system can be arranged. When the degree of disorder increases, the entropy also increases.
In summary, phase change from solid to gas has a more dramatic increase in entropy. This is because gas has the highest entropy of all phases, and the transition from solid to gas involves both increasing temperature and changing the arrangement of particles from an ordered solid to a disordered gas, resulting in a significant increase in entropy.
Learn more about entropy here:
https://brainly.com/question/13135498#
#SPJ11
the specific heat of plastic is 50 times greater than the specific heat of lead, 10 times greater than the specific heat of stone, and 1.5 times greater than the specific heat of water. if the samples of plastic, lead, stone, and water have identical masses and identical starting temperatures, and are given identical increases in energy of 1,000 j, which sample will end up with the highest temperature?
The substances that is going to end up with the highest temperature in the list is water.
How does heat capacity affect temperature rise?Heat capacity is the amount of heat energy required to raise the temperature of a substance by one degree Celsius or one Kelvin. It is a measure of the substance's ability to store heat. The greater the heat capacity of a substance, the more heat energy it can absorb before its temperature rises significantly.
When heat is added to a substance, the temperature of the substance increases. The amount by which the temperature increases depends on the amount of heat added and the heat capacity of the substance.
Learn more about heat capacity:https://brainly.com/question/1344005
#SPJ1
Given 30 grams NaBr how many grams of Cl2 are required to complete this reaction?
2NaBr + Cl2 = 2NaCl + Br2
Answer:
10.3 grams
Explanation:
The balanced equation shows that 1 mole of Cl2 reacts with 2 moles of NaBr. To find out how much Cl2 is required to react with 30 grams of NaBr, we need to convert grams to moles.
First, we need to find the molar mass of NaBr:
NaBr = 23 + 79.9 = 102.9 g/mol
Now we can calculate the number of moles of NaBr:
30 g NaBr ÷ 102.9 g/mol = 0.291 moles NaBr
From the balanced equation, we know that 1 mole of Cl2 reacts with 2 moles of NaBr. Therefore, we need half as many moles of Cl2 as we have moles of NaBr:
0.291 moles NaBr ÷ 2 = 0.1455 moles of Cl2
Finally, we can convert moles of Cl2 to grams using its molar mass:
Cl2 = 35.5 x 2 = 71 g/mol
0.1455 moles Cl2 x 71 g/mol = 10.3 grams of Cl2
Therefore, 10.3 grams of Cl2 are required to react completely with 30 grams of NaBr in this reaction.
in the solidifcation process the production of metallic slabs or ingots is known as the process of turning the metallic slabs or ingots into useful shapes is known as
The process of turning metallic slabs or ingots into useful shapes is known as "hot working" or "hot forming".
Hot working is a metalworking process where metals are shaped when they are above their recrystallization temperature. This process is usually done after a metal has been solidified from its molten state. It involves the application of force to change the shape of the metal, usually by compressing, drawing, forging, or extruding.
The temperature used during hot working can vary depending on the type of metal, but typically it must be at least half of the metal's melting point temperature. By hot working, the metal can be formed into various shapes, including thin sheets, rods, and tubes.
In the hot working process, the metal is heated until it reaches the recrystallization temperature and then deformed by mechanical means, such as hammering or rolling. The metal is then cooled down, either slowly or rapidly, depending on the required properties of the metal. Rapid cooling will increase the strength of the metal but also make it brittle, while slower cooling will give the metal more ductility. During cooling, some of the metal grains are recrystallized, leading to a homogeneous microstructure.
Hot working is an important process for many metal fabrication industries, including automotive, aerospace, and construction. It is used to create metal parts and components with superior strength and ductility, as well as for creating metal artworks or sculptures. The process is also widely used in metal recycling, where it is used to reshape and reform metals from their original form. Hot working can be a complex process and is typically done by highly skilled metalworkers.
To know more about hot working, refer here:
https://brainly.com/question/18994380#
#SPJ4
What happens to molecules once they are eaten by animals
When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.
Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.
Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.
Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.
To know more about molecules, here
brainly.com/question/4745152
#SPJ4
--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--
write the reaction that produces carbon dioxide in the separatory funnel in the workup of the reaction. g
One common reaction that produces carbon dioxide in organic chemistry workup is the reaction between sodium bicarbonate (NaHCO₃) and an acid.
When an acidic solution is added to a mixture containing sodium bicarbonate, carbon dioxide gas is produced as a result of the following reaction:
NaHCO₃ + H+ → Na+ + CO₂ + H₂O
The carbon dioxide gas will then bubble out of the mixture and can be collected in a separate container or released into the air.
In a separatory funnel workup, this reaction may be used to remove excess acid from an organic reaction mixture. The mixture is first extracted with a suitable organic solvent, and then an aqueous solution of sodium bicarbonate is added to the separatory funnel. The acidic components in the mixture will react with the sodium bicarbonate to produce carbon dioxide, which will bubble out of the mixture and can be released through the stopcock
To learn more about reaction refer to:
brainly.com/question/29039149
#SPJ4
g if a chemical spill occurs in lab, the best step to take is...group of answer choicesimmediately use the safety showerimmediately let the instructor knowcover the spill with absorbent material such as paper towelsquickly rinse the area with as much cool water as possible
If a chemical spill occurs in the lab, the best step to take is to quickly rinse the area with as much cool water as possible. A chemical spill can lead to harmful chemical exposure, and the best way to avoid exposure is to act fast and neutralize the spill.
What is the best way to handle a chemical spill?Chemical spills can occur anywhere that hazardous chemicals are being used, but they are most common in industrial and laboratory settings. If you come across a chemical spill, it's important to act quickly and safely to prevent exposure. Here are the steps to follow in the event of a chemical spill:
Step 1: Assess the situation
The first step in handling a chemical spill is to assess the situation. Determine the type and quantity of the spilled material, as well as the potential hazards associated with it. This will help you determine the appropriate response.
Step 2: Evacuate the area
If the spill is large or the chemical is particularly dangerous, evacuate the area immediately. Alert others in the area to evacuate as well.
Step 3: Alert others
Once you have assessed the situation and determined the appropriate response, alert others in the area to the spill. Notify your instructor or supervisor and follow their instructions.
Step 4: Personal Protective Equipment (PPE)
When responding to a chemical spill, be sure to wear appropriate personal protective equipment (PPE), such as gloves, goggles, and lab coats.
Step 5: Use absorbent material
Use absorbent material, such as paper towels or absorbent socks, to contain the spill and prevent it from spreading. Once the spill is contained, dispose of the absorbent material according to your lab's waste disposal guidelines.
Step 6: Rinse the area with water
Quickly rinse the area with as much cool water as possible. This will help to neutralize the spill and prevent further damage.
Step 7: Use safety shower
If the spilled chemical comes in contact with your skin, use a safety shower to rinse off the chemical. Make sure to rinse thoroughly for at least 20 minutes.
Step 8: Dispose of contaminated materials
Dispose of contaminated materials according to your lab's waste disposal guidelines. Make sure to properly label all waste containers.
So, in a chemical spill the right thing to do will be 4. quickly rinse the area with as much cool water as possible
Learn more about chemical spill on:
https://brainly.com/question/30125064
#SPJ11
what minimal photon energy in ev is required to eject an electron from the ground state of a doubly ionized lithium
The minimum photon energy required to eject an electron from the ground state of a doubly ionized lithium is 8.62 eV.
This is due to the fact that ionization energy of doubly ionized lithium is 8.62 eV, which means that the minimum amount of energy required to remove an electron from the atom is 8.62 eV.
This is the amount of energy that the incoming photon must have in order to eject an electron from the ground state of a doubly ionized lithium atom.
In other words, the photon must possess at least 8.62 eV of energy to remove the electron from the atom.
This is why a photon with energy of 8.62 eV or more is required to eject an electron from the ground state of a doubly ionized lithium atom.
To know more about ionization energy click on below link:
https://brainly.com/question/28385102#
#SPJ11
which period contains three elements that commonly exist as diatomic molecules at standard temperature and pressure conditions?
Answer:
H2, N2, O2, F2, Cl2
Explanation:
trontium-90 has a half-life of 28.8 years. if you start with a 10 gram sample of strontium-90, how much will be left after 115.2 years?
After 115.2 years starting with a 10 gram sample of strontium-90, only 0.625 grams of strontium-90 will remain due to radioactive decay.
Strontium-90 is a radioactive isotope that goes through dramatic rot with a half-existence of 28.8 years. This really intends that after each 28.8-year time frame, how much strontium-90 excess in an example is divided. To decide how much strontium-90 will be left after 115.2 years, we can utilize the accompanying recipe:
N = N0 * (1/2)^(t/T1/2)
where N is the last measure of strontium-90, N0 is the underlying sum, t is the time slipped by, and T1/2 is the half-life. Subbing the given qualities, we get:
N = 10 g * (1/2)^(115.2/28.8)
N = 10 g * (1/2)^4
N = 10 g * 0.0625
N = 0.625 g
In this manner, after 115.2 years, beginning with a 10 gram test of strontium-90, just 0.625 grams of strontium-90 will stay because of radioactive rot. This estimation shows that how much radioactive material declines over the long run, which is a significant thought in the protected dealing with and removal of radioactive materials.
To learn more about trontium-90 and strontium-90, refer:
https://brainly.com/question/14102797
if the concentration of zn2 is 0.10 m, what concentration of cr3 should be used so that the overall cell potential is 0 v?
Answer: The concentration of Cr3 needed to achieve a cell potential of 0 V is 0.0310 M.
To calculate the concentration of Cr3 needed for the overall cell potential to be 0 V, you will need to use the Nernst equation. The equation is as follows: Ecell = E°cell - (2.303 RT/nF) * lnQ, where Ecell is the cell potential, E°cell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of moles of electrons involved in the reaction, and F is the Faraday constant.
Given the information in the question, the concentration of Zn2 is 0.10 M, you can calculate the concentration of Cr3 needed to achieve a cell potential of 0 V:
Ecell = 0 V
E°cell = E°cell (given)
R = 8.314 J/K•mol
T = 298 K (room temperature)
n = 2 (number of moles of electrons involved)
F = 96485 C/mol
Substituting these values into the equation, you get: 0 = E°cell - (2.303 * 8.314 * 298/2*96485) * lnQ.
Solving for Q (the reaction quotient), you get
Q = (E°cell/2.303RT/nF)
= (1.1V/2.303 * 8.314 * 298/2*96485)
= 0.0310 M.
Therefore, the concentration of Cr3 needed to achieve a cell potential of 0 V is 0.0310 M.
Learn more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
tungsten has a radius of 141 pm and crystallizes in a body-centered cubic structure. what is the edge length of the unit cell?
Answer: The edge length of the unit cell for tungsten is 0.548 nm.
Tungsten has a radius of 141 pm and crystallizes in a body-centered cubic structure.
The edge length of the unit cell can be calculated as follows:
Edge length of a body-centered cubic unit cell
(a) = √3 × 4r/3, where r is the radius of the atom.
Given, tungsten has a radius of 141 pm.
Thus, a = √3 × 4 × 141 pm / 3
= √3 × 564 pm / 3
= 1.417 × 10^-7 m / pm × √3 × 564
= 0.316 nm × 1.732
= 0.548 nm
The edge length of the unit cell for tungsten is 0.548 nm.
Learn more about length of cell here:
https://brainly.com/question/29475879#
#SPJ11
Which stage of mitosis is the easiest (in your opinion) to see on the slide? What about it makes it easy to identify?
I reckon is is the Prophase stage. My reason is that the difference between Interphase and Prophase is actually really obvious. In Interphase, the chromosomes aren't paired up, whereas in Prophase, the chromosomes are beginning to pair up.
a solution at room tempearature with a ph of less than 7 will be: select the correct answer below: acidic basic neutral depends on the solution
a. Acidic
b. Basic
c. Neutral
d. Depens on the solution
The correct answer is the option a) acidic. A solution at room temperature with a pH of less than 7 will be acidic.
What are acids and bases?Acids and bases are two types of chemical compounds that are important to human life. Acids are substances that have a pH of less than 7. They taste sour and, when mixed with a base, form a neutral substance. Acids are often used in industrial processes, such as cleaning or etching metals, as well as in medicine.
Bases are substances that have a pH of greater than 7. They taste bitter and have a slippery feel. When mixed with an acid, they form a neutral substance. Bases are commonly used in cleaning products and in the production of fertilizers and plastics.
A solution at room temperature with a pH of less than 7 will be acidic.
Therefore, the correct answer is (a) Acidic.
To learn more about pH refer: https://brainly.com/question/16086492
#SPJ11
) your sample will not be useful to you after 95% of the radioactive nuclei present on the day the sample arrives have disintegrated. for about how many days after the sample arrives will you be able to use the polonium?
The half-life of Polonium-210 is 417 days.
We know that the half-life of polonium is 139 days. This means that half of the original amount of polonium will disintegrate every 139 days. Now, suppose that the original amount of polonium is P0. After 139 days, half of the amount will be disintegrated. This means that the amount remaining is P0/2. Again, after another 139 days, half of the remaining amount will disintegrate. This means that the amount remaining will be P0/4. Similarly, after 3 half-lives, which is 3 x 139 = 417 days, the amount remaining will be:
P0/2³ = P0/8
This means that 7/8 of the original amount of polonium has disintegrated.
Therefore, 95% of the original amount has disintegrated after 139 days x (3 + 0.2)
half-lives = 417 days.
Therefore, the duration for which you will be able to use the polonium after the sample arrives is 417 days.
The question you wrote is incomplete, maybe the complete question is:
Polonium-210
The half-life of polonium is 139 days, but your sample will not be useful to you after 95% of the radioactive nuclei present on the day the sample arrives has disintegrated. For about how many days after the sample arrives will you be able to use the polonium?
Learn more about polonium at https://brainly.com/question/28096866
#SPJ11
magnesium chloride is a common deicer used to melt snow on the road in winter. what is the freezing point of a solution where 34.4 g of magnesium chloride is dissolved in 0.9 kg of water (kf
Answer : The freezing point of the solution is -0.746 °C.
Magnesium chloride is a common deicer used to melt snow on the road in winter.To find out the freezing point of the solution, we need to use the formula ΔTf = Kf × m where ΔTf is the freezing point depression, Kf is the freezing point depression constant, and m is the molality of the solution.
First, we need to find the molality of the solution. Molality is defined as the number of moles of solute per kilogram of solvent. The molar mass of magnesium chloride is 95.2 g/mol. Therefore, the number of moles of magnesium chloride in the solution is:
Number of moles of magnesium chloride = mass of magnesium chloride / molar mass of magnesium chloride
= 34.4 g / 95.2 g/mol
= 0.361 moles
The mass of water in the solution is 0.9 kg, which is equivalent to 900 g. Therefore, the molality of the solution is:
Molality = number of moles of solute / mass of solvent in kg
= 0.361 moles / 0.9 kg
= 0.401 m
The freezing point depression constant of water is 1.86 °C/m. Therefore, the freezing point depression of the solution is: ΔTf = Kf × m
= 1.86 °C/m × 0.401 m
= 0.746 °C
The freezing point of pure water is 0 °C. Therefore, the freezing point of the solution is: Freezing point of solution = freezing point of pure solvent − ΔTf
= 0 °C − 0.746 °C
= -0.746 °C
Know more about freezing point here:
https://brainly.com/question/3121416
#SPJ11
would you expect the entropy of 1.00 moles of agcl added to 1.00 l of water to form agcl (aq) to be greater than, less than, or equal to the entropy of 1.00 moles of nacl added to 1.00 l of water to form nacl (aq)? explain your reasoning. (hint: think about your solubility rules)
The entropy of 1.00 moles of AgCl added to 1.00 L of water to form AgCl(aq) would be less than the entropy of 1.00 moles of NaCl added to 1.00 L of water to form NaCl(aq).
This is because AgCl is less soluble in water compared to NaCl, due to solubility rules. When NaCl dissolves in water, it forms more ions and increases entropy more significantly than AgCl does.
Entropy is a thermodynamic quantity that describes the degree of disorder or randomness in a system. When a substance dissolves in a solvent, the entropy of the system increases due to the increased disorder caused by the mixing of the two substances.
In the given scenario, 1.00 moles of AgCl is added to 1.00 L of water to form AgCl(aq), and 1.00 moles of NaCl is added to 1.00 L of water to form NaCl(aq).
Since NaCl is more soluble in water compared to AgCl, it forms more ions when it dissolves in water, resulting in a greater increase in disorder and hence a greater increase in entropy.
Solubility rules state that AgCl is insoluble in water, meaning that it does not dissociate into ions and remains as AgCl(s) in water. On the other hand, NaCl is highly soluble in water, meaning that it dissociates into Na+ and Cl- ions when it dissolves in water.
Therefore, when NaCl dissolves in water, it forms more ions and contributes more to the increase in entropy of the system compared to AgCl.
Therefore, the entropy of 1.00 moles of AgCl added to 1.00 L of water to form AgCl(aq) would be less than the entropy of 1.00 moles of NaCl added to 1.00 L of water to form NaCl(aq), due to the difference in solubility and the resulting difference in the number of ions formed.
To learn more about entropy, refer below:
https://brainly.com/question/13135498
#SPJ11
the mass of a single atom of an element which has only one stable isotope is 1.79*10^-22 grams. what is the atomic weight of the element
The atomic weight of the element is 1.79 × 10-22 grams
The atomic weight of an element is the average mass of its atoms relative to the mass of an atom of carbon-12, which is defined as 12.0000 atomic mass units (amu).
Since the element has only one stable isotope, its atomic weight is equal to the mass of a single atom of the element in amu.
Converting the given mass of a single atom from grams to amu:
1.79 x 10^-22 g x (1 amu / 1.66054 x 10^-24 g) = 1.079 amu
Therefore, the atomic weight of the element is 1.079 amu.
To know more about atomic weight click here:
https://brainly.com/question/13000210
#SPJ11
how many moles of each reactant are needed to produce 3.60*10 to the power of 2 g ch3oh
We need 5.62 moles of H2 and 5.62 moles of CO to produce 3.60 × 10^2 g of CH3OH.
How to calculate the mole ?
To calculate the number of moles of a substance, we use the formula:
moles = mass / molar mass
where "mass" is the mass of the substance in grams and "molar mass" is the molar mass of the substance in grams per mole.
To determine the number of moles of reactants needed to produce a given amount of product, we need to use the balanced chemical equation for the reaction and the molar mass of the product.
Assuming that the reaction is:
2H2 + CO → CH3OH
We can see that the stoichiometry of the reaction is 2:1, which means that for every 2 moles of H2, we need 1 mole of CO to produce 1 mole of CH3OH.
The molar mass of CH3OH is:
12.01 + 4(1.01) + 16.00 = 32.04 g/mol
Therefore, to produce 3.60 × 10^2 g of CH3OH, we need:
n(CH3OH) = (3.60 × 10^2 g) / (32.04 g/mol) = 11.23 mol
Since the stoichiometry of the reaction is 2:1, we need half as many moles of H2 as we do of CH3OH:
n(H2) = 1/2 × n(CH3OH) = 1/2 × 11.23 mol = 5.62 mol
And we need half as many moles of CO as we do of CH3OH:
n(CO) = 1/2 × n(CH3OH) = 1/2 × 11.23 mol = 5.62 mol
Therefore, we need 5.62 moles of H2 and 5.62 moles of CO to produce 3.60 × 10^2 g of CH3OH.
To know more about moles visit :-
https://brainly.com/question/1634438
#SPJ1
how many electrons does cl want to gain? hint: how many are gained to form a stable noble gas electron configuration, ns2 np6 (octet rule)?
Chlorine (Cl) is a nonmetal, meaning it has the tendency to gain electrons to achieve the electron configuration of a noble gas. The noble gas electron configuration of the nearest noble gas, argon (Ar), is 1s2 2s2 2p6 3s2 3p6, with a total of 18 electrons.
Chlorine has 7 valence electrons, meaning it needs 1 more electron to achieve a stable noble gas electron configuration. Therefore, chlorine wants to gain 1 electron to achieve a stable noble gas configuration.
In terms of bonding, chlorine can either gain 1 electron to form an anion with a 1- charge or it can share electrons with another atom to form a covalent bond. Chlorine most commonly forms a single covalent bond with another atom, such as hydrogen, to form hydrogen chloride (HCl). In this case, both atoms share electrons to form a stable molecule.
To know more about Chlorine refer here:
https://brainly.com/question/28440406#
#SPJ11
(a) Calculate the number of moles in 12.25 kg of ammonium chloride (NH4Cl) Relative Formula Mass (Mr) = 53.5
answer in standard for to 2 sf
The number of moles in 12.25 kg of ammonium chloride would be 229.02 moles.
Number of molesTo calculate the number of moles of ammonium chloride (NH4Cl) in 12.25 kg, we need to use the formula:
Number of moles = Mass / Molar mass
First, we need to calculate the molar mass of NH4Cl, which is the sum of the atomic masses of all the atoms in one mole of the compound:
Molar mass of NH4Cl = (1 x atomic mass of N) + (4 x atomic mass of H) + (1 x atomic mass of Cl)
= (1 x 14.01) + (4 x 1.01) + (1 x 35.45)
= 53.49 g/mol (rounded to two decimal places)
Now we can use the formula to calculate the number of moles:
Number of moles = Mass / Molar mass
= 12,250 g / 53.49 g/mol
= 229.02 mol (rounded to two decimal places)
Therefore, there are 229.02 moles of ammonium chloride in 12.25 kg of the compound.
More on number of moles can be found here: https://brainly.com/question/31039725
#SPJ1
How many grams of KNO3 per 100g of water would be crystallized from a saturated solution as the temperature drops from:
A. 80°C to 20°C
B. 60°C to 40°C
C. 50°C to 30°C
D. 80°C to 0°C
E. 50°C to 10°C
A. 80°C to 20°C - 16.9g KNO3 per 100g of water
B. 60°C to 40°C - 14.7g KNO3 per 100g of water.
C. 50°C to 30°C - 12.6g KNO3 per 100g of water
D. 80°C to 0°C - 32.2g KNO3 per 100g of water.
E. 50°C to 10°C - 21.9g KNO3 per 100g of water
The temperature drops from various starting points of waterThe amount of potassium nitrate that can be crystallized from a saturated solution is dependent on the temperature. As the temperature decreases, the amount of KNO3 that can be crystallized increases.
When the temperature drops from 80°C to 20°C, 16.9g of KNO3 can be crystallized from a saturated solution per 100g of water. This is the lowest amount of KNO3 that can be crystallized from a saturated solution, as the temperature cannot be lower than this.
The amount of KNO3 increases as the temperature drops from 60°C to 40°C, with 14.7g of KNO3 crystallizing per 100g of water. This pattern continues, with 12.6g of KNO3 crystallizing from a saturated solution when the temperature drops from 50°C to 30°C.
When the temperature drops from 80°C to 0°C, the highest amount of KNO3 can be crystallized from a saturated solution, with 32.2
Learn more about temperature drop here:
https://brainly.com/question/29177481
#SPJ1
which three acids are used during this laboratory? give names and formulas for each. also indicate whether each acid is weak or strong and whether each acid is an oxidizing acid. acid formula acid name strong or weak? oxidizing or not? 1. 2. 3.
In this laboratory, the following three acids are used: Hydrochloric acid (HCl) with a formula of HCl, Sulfuric acid (H2SO4) with a formula of H2SO4, and Nitric acid (HNO3) with a formula of HNO3.Acids are known to be oxidizing agents, meaning that they are capable of accepting electrons to reduce other species.
Strong acids are those that completely dissociate into their constituent ions in aqueous solution. Hydrochloric acid, sulfuric acid, and nitric acid are all strong acids.
Here are the acids used during this laboratory: Acid Formula Name Strong or weak? Oxidizing or not?
1. (HCL)Hydrochloric acid Strong (Yes) 2. (H2SO4) Sulfuric acid Strong (Yes) 3. (HNO3) Nitric acid Strong (Yes) Acids are used in various laboratory experiments due to their unique chemical and physical properties.
They are used as reactants in many chemical reactions, as solvents for various compounds, and as catalysts for several reactions, among other applications.
To know more about acids refer here:
https://brainly.com/question/14072179#
#SPJ11
What is the balanced chemical
reaction for the synthesis of
nitrogen with hydrogen?
A. N₂ +H₂ → NH
B. N₂ + 2H₂ → 2NH3
C. 3N₂ + H₂ → 2NH3
D. N₂ + 3H₂ → 2NH3
The balanced chemical reaction for the synthesis of hydrogen with nitrogen is for the production of ammonia. This process is called Haber process. Option D is the correct answer.
What is Haber process?The Haber process is a chemical process that is used to produce ammonia (NH₃) from nitrogen (N₂) and hydrogen (H₂) gases. The process was developed by German chemist Fritz Haber in 1909 and is also known as the Haber-Bosch process.
The process involves the reaction of nitrogen and hydrogen in the presence of an iron catalyst and high pressure and temperature. The reaction is exothermic, releasing a large amount of heat. The Haber process is represented by the given balanced equation:
N₂ + 3H₂ → 2NH₃
The ammonia produced by the Haber process is a key component in the production of fertilizers and is also used in the manufacture of a wide range of other products, including explosives, dyes, and cleaning agents.
To find out more about ammonia, visit:
https://brainly.com/question/17392683
#SPJ1