What year did Clara Baer invent Nukem/Newcomb ball?

Answer:

28 m/s

Explanation:

vf^2=vi^2+2a(delta y)

=sqrt(2* -9.8 m/s^2* -40 m)

=28 m/s

Answer:

Acceleration and mass.

Explanation:

Depends on how heavy the car is and how fast it is going.

F=MA

Answer:

Low mass stars are: hydrogen burning in the core while on the Main Sequence. As the hydrogen fuel runs out, extreme pressure raises the temperature to 100 million degrees, where helium burning becomes possible.

Answer:

Your answer is C! :D

Explanation:

From Room 1 to Rooms 2 and 3 until all rooms are about 27°C. The correct option is C.

The movement of heat (energy) from the interior of the Earth to the surface is referred to as heat flow.

The majority of the heat is generated by the cooling of the Earth's core and the generation of radioactive heat in the upper 20 to 40 km of the Earth's crust.

The direction of heat flow is determined by the temperature difference between the bodies. Heat is transferred from a hotter body to a colder one.

As the illustration depicts a simplified floor plan for a small house. As the day progresses and the sun sets, the rooms on the west side of the house become warmer than the rooms on the east, as evidenced by the temperatures in each room.

The direction of heat flow through the house, and the effect of the large flow on temperature, will be from Room 1 to Rooms 2 and 3, until all rooms are around 27°C.

Thus, the correct option is C.

For more details regarding heat flow, visit:

https://brainly.com/question/26301591

#SPJ2

Answer:

In the given equation y=Asin(ωt−kx)

Since, trigonometric function is a dimensionless quantity. So, (ωt−kx)is also dimensionless quantity.

So,

(ωt−kx)=1

ωt=1

[ω]= 1=[T] ^−1

[T]

kx=1

[k]= 1=[L]^ −1

[L]

Answer:

false

Explanation:  because the other scientists could've missed something in there experiment

Answer:

30.63 m

Explanation:

From the question given above, the following data were obtained:

Total time (T) spent by the ball in air = 5 s

Maximum height (h) =.?

Next, we shall determine the time taken to reach the maximum height. This can be obtained as follow:

Total time (T) spent by the ball in air = 5 s

Time (t) taken to reach the maximum height =.?

T = 2t

5 = 2t

Divide both side by 2

t = 5/2

t = 2.5 s

Thus, the time (t) taken to reach the maximum height is 2.5 s

Finally, we shall determine the maximum height reached by the ball as follow:

Time (t) taken to reach the maximum height = 2.5 s

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (h) =.?

h = ½gt²

h = ½ × 9.8 × 2.5²

h = 4.9 × 6.25

h = 30.625 ≈ 30.63 m

Therefore, the maximum height reached by the cannon ball is 30.63 m

Answer:

I NEED OPTIONS

Explanation:

Answer:

3150

Explanation:

if if you were two times 45 times 70 it would give you that answer

Answer:

They are perpendicular.

Explanation:

Answer:

The sum of the three vectors are 63.18 km.

Explanation:

Given that,

One vector = 74 km at 30°

Second vector = 54 km at 135°

Third vector = 62 km

We need to calculate the sum of the three vectors

Using given data

[tex]R=\vec{A}\sin\theta+\vec{B}\sin\theta+\vec{C}[/tex]

Put the value into the formula

[tex]R=-74\sin30+54\sin135+62[/tex]

[tex]R=63.18\ km[/tex]

Hence, The sum of the three vectors are 63.18 km.

The speed of the train is 150 Km/h.

Speed can be defined as the distance travelled over a period of time. Mathematically, it can be expressed as:

Speed = Distance / Time

With the above formula, we can obtain the speed of the train as shown below:

Speed = Distance / Time

Speed = 600 / 4

Speed = 150 Km/h

Therefore, the speed of the train is 150 Km/h.

Learn more about speed:

https://brainly.com/question/680492

Given parameters:

First velocity  = 2.50m/s

Time of travel = 3s

Second velocity  = 1.50m/s

Unknown:

The displacement during the first interval = ?

Velocity is the displacement of a body with time. Displacement is a distance move in a specific direction by a body.

    Velocity  = [tex]\frac{Displacement}{Time taken}[/tex]

So;

      Displacement  = Velocity x Time taken

Now input the parameter for the first velocity and time of travel;

      Displacement  = 2.5 x 3  = 7.5m

The displacement id 7.5m

Answer:

238 900 miles

Explanation:

google said it.

Answer:

a)  vₓ = 100 + 7.07 = 107.07 knot     (East) ,   v_{y} = 7.07 knot            (North)

b) v_wind_ North = 0 ,   v_wind_West = 61.12 knot      (West)

Explanation:

a) This is a vector velocity addition problem, they tell us that the plane goes East at 100 Knots and the wind goes North East at 10 Knots

the components ask the total speed of the plane.

For this we decompose the wind speed

            cos 45 = v₂ₓ / V₂

            sin 45 = [tex]v_{2y}[/tex] / v₂

            v₂ₓ = v₂ cos 45

           v_{2y} = v₂ sin 45

            v₂ₓ = 10 cos 45 = 7.07 m / s

            v_{2y} = 10 sin45 = 7.07 m / s

the speed of the plane is

            vₓ = v_plane + v₂ₓ

            v_{y} = v_{2y}

            vₓ = 100 + 7.07 = 107.07 knot     (East)

            v_{y} = 7.07 knot            (North)

speed is

            v = (107.07 i ^ + 7.07 j ^) knot

b) Estimated time for Target VOR t = 10 min

for a time of t = 10 min and 15 s, it is at a distance of d = 300 m from the VOR in an easterly direction

find the average speed of time on the ride

in the North direction there is no deviation so the average wind speed is zero

            v_wind_ North = 0

In the east direction

as the estimated time was 10 min and the real time for the distance is 10 min 15 s

the time difference is t = 15 s to travel d = 300 m

with these data we can calculate the speed of the plane

              v = x / t

              v = 300/15

              v = 20 m / s

let's reduce this speed to knot

             v_real = 20 m / s (1knot / 0.5144 m / s) = 38.88 knots

therefore the wind speed is

              v_tral = v_plane + v_wind_Este

              v_wind_Este = v_real - v_avión

               v_wind_Este = 38.88 - 100

                v_wind_Este = -61.12 knot

the negative sign indicates that the wind is going west

                v_wind_West = 61.12 knot (West)

3)

* The compass is not calibrated, to correct the magnetic deviation, therefore it gives an appreciable error in the direction

* The wind speed is taken when leaving, but there is no constant monitoring, so a change in direction or wind speed in the trajectory can significantly affect the results.

* The aircraft may noir throughout the trajectory at level, due to pitch errors

Answer:

499 seconds or a little over 8 minutes

Explanation:

~150 million km/ 300,000 km per second = 500 seconds

Answer: To isolate the unknown substances, of which only tiny amounts were present, the Curies were the first to use a new method of chemical analysis. They employed various standard (but sometimes demanding) chemical procedures to separate the different substances in pitchblende.

Explanation:

Answer:

Sound travel faster through the medium of solid.

Answer:

Q / Q₀ = 3.4 ,      ΔQ = 31.14 10⁻⁶ C

Explanation:

For this exercise we will calculate the charge of the capacitor with and without dielectric

the capacitance is given by

          C = Q /ΔV

we also use the ratio of capacitances

          C = k C₀

           Q /ΔV = kQ₀ /ΔV

           Q = k Q₀

            Q / Q₀ = k

            Q / Q₀ = 3.4

If we want a numerical value

           C = k Q / DV

           Q = C ΔV / k

            Q = 2.5 10⁻⁶ 60 / 3.4

            Q = 44.12 10⁻⁶ C

whereby the charge without dielectric is

          Q₀ = Q / 3.4

          Q₀ = 44.12 / 3.4 10⁻⁶

          Q₀ = 12.98 10⁻⁶ C

therefore the charge when removing the dielectric is reduced, the amount of charge that flows is

          ΔQ = Q - Q₀

          ΔQ = (44.12 - 12.98) 10⁻⁶

          ΔQ = 31.14 10⁻⁶ C

The amount of charge should be Q / Q₀ = 3.4 ,    ΔQ = 31.14 10⁻⁶ C

For this given situation,  we will determine the charge of the capacitor with and without dielectric

We know that

the capacitance is given by

         C = Q /ΔV

Now here we can applied the ratio of capacitances

So,

         C = k C₀

          Q /ΔV = kQ₀ /ΔV

          Q = k Q₀

           Q / Q₀ = k

           Q / Q₀ = 3.4

In case of numerical value

          C = k Q / DV

          Q = C ΔV / k

           Q = 2.5 10⁻⁶ 60 / 3.4

           Q = 44.12 10⁻⁶ C

whereby the charge without dielectric is

         Q₀ = Q / 3.4

         Q₀ = 44.12 / 3.4 10⁻⁶

         Q₀ = 12.98 10⁻⁶ C

Thus the charge at the time when removing the dielectric is decreased , the amount of charge that flows is

         ΔQ = Q - Q₀

         ΔQ = (44.12 - 12.98) 10⁻⁶

         ΔQ = 31.14 10⁻⁶ C

Learn more about battery here: https://brainly.com/question/24841364

Answer:

Newton's first law says that if the net force on an object is zero ( Σ F = 0 \Sigma F=0 ΣF=0\Sigma, F, equals, 0), then that object will have zero acceleration. That doesn't necessarily mean the object is at rest, but it means that the velocity is constant.

Explanation:

According to Newton’s first law of motion, a moving object acted on by a net force of zero will continue in motion.

Newton's first law of motion states that an object in state of rest or uniform motion in a straight line will continue in that state unless it is acted upon by an external force.

This first is also known as the law of inertia because it is the reluctance of an object in motion to stop moving or reluctance of an object at rest to start moving which depends on the mass of the object.

Thus, we can conclude that according to Newton’s first law of motion, a moving object acted on by a net force of zero will continue in motion.

Learn more here:https://brainly.com/question/10454047

Answer:

The conversion factors you will use to multiply is 1/0.001 or simply 1000 to perform the unit conversion.

Explanation:

To convert from gram/centimeter³ to kilogram/meter³

First,

NOTE:

1 kilogram = 1000 gram, that is 1 gram = 0.001 kilogram; and

1 meter = 100 centimeter, that is 1 centimeter = 0.01 meter

then,

1 meter³ = 1000000 centimeter³, that is

1 centimeter³ = 0.000001 meter³

Now, we can write that

1 kilogram/meter³ = 1000 gram / 1000000 centimeter³

= 0.001 gram/centimeter³

If 1 kilogram/meter³ = 0.001 gram/centimeter³

Then, 1 gram/centimeter³ = 1/0.001 kilogram/meter³  = 1000 kilogram/meter³

Hence, 1 gram/centimeter³  = 1000 kilogram/meter³

∴The conversion factors you will use to multiply is 1/0.001 or simply 1000 to perform the unit conversion.

That is,

2.33 gram/centimeter³ will be 2.33 × 1000 kilogram/meter³

= 2330 kilogram/meter³

Answer:

200000000000000000000000

Explanation:

Answer:

10000000000000000100

Explanation:

Answer: 938

Explanation:

1.67x10^-27kg (938V/c2)

Answer:

F-ma

Explanation:

If you are speaking of objects like satellites, etc. then their mass is much less than that of the Earth. A good approximation is Newton's first law of motion:

Force = Mass ×  Acceleration

often written:

F = m a

The gravitational force is the same between the Earth and the object - only the mass differs. So the acceleration is inversely proportional to the mass.

Answer:

7.13781 m/s

Explanation:

X-direction             | Y-direction

[tex]x=v_{xo}t+\frac{1}{2}a_{x}t^2[/tex]      | [tex]y=v_{yo}t+\frac{1}{2}a_{y}t^2[/tex]

[tex]3.41=v_{o}cos(28.4)t[/tex]  | [tex]0.397=v_{yo}sin(28.4)t+\frac{1}{2} (-9.81)t^2[/tex]

[tex]3.41=v_{o}(0.87964)t[/tex]  | [tex]0.397=v_{yo}sin(28.4)(\frac{3.87658}{v_{o} })+\frac{1}{2} (-9.81)(\frac{3.87658}{v_{o} })^2[/tex]

[tex]\frac{3.41}{0.87964}=v_{o}t[/tex]             | [tex]0.397=1.84379-\frac{73.71171}{v^2}[/tex]

[tex]\frac{3.87658}{v_{o} } =t[/tex]                | [tex]7.13781=v[/tex]

Answer:

2.5

Explanation:

Answer:

Its Reversing the polarity of the magnet :)

Explanation:

The action that cause the induced current for reduce or be same is when the polarity is reverse with respect to the magnet.

The following actions should not induced the current:

Therefore we can conclude that the action that cause the induced current for reduce or be same is when the polarity is reverse with respect to the magnet.

Learn more: brainly.com/question/362440