The entire bottle of coke has a greater density than a glass of coke.
The density of the substance is determined by dividing the mass of the substance by its volume. When comparing the entire bottle of Coke to a glass of Coke, we can see that the bottle contains more mass and occupies a larger volume than the glass. The bottle is typically larger and can hold more liquid than a glass. Therefore, the mass of the Coke in the bottle is greater than the mass of the Coke in the glass, and the volume occupied by the Coke in the bottle is larger than the volume occupied by the Coke in the glass. Since the density is calculated by dividing mass by volume, and the mass of the Coke in the bottle is greater while the volume is also greater, the density of the entire bottle of Coke is higher compared to the density of the glass of Coke. Therefore, the entire bottle of coke has a greater density than a glass of coke.
Learn more about density:
https://brainly.com/question/1354972
#SPJ11
I am driving to CSU at 23 m/s. I'm 100 m from the intersection when I see the light turn red. My reaction time is 0.73 s. Assuming my car has a constant acceleration for its brakes, what is the total time needed to bring my car to rest right at the edge of the intersection. Answer in seconds.
The total distance is 100 m - 16.79 m = 83.21 m. The total time needed to bring your car to rest at the edge of the intersection, we can break down the problem into two parts: the reaction time and the braking time. Since you are driving at a constant speed of 23 m/s, in 0.73 seconds your car would have traveled a distance of:
Distance = Speed × Time
Distance = 23 m/s × 0.73 s
Distance = 16.79 m
Now, let's calculate the remaining distance you need to cover to reach the edge of the intersection, considering that your car is coming to a stop. The total distance is 100 m - 16.79 m = 83.21 m.
Since your car is braking with a constant acceleration, we can use the following kinematic equation to find the braking time (t):
Distance = (Initial Velocity × t) + (0.5 × Acceleration ×[tex]t^2)[/tex]
In this case, the initial velocity is 23 m/s, the distance is 83.21 m, and the acceleration is negative (since it opposes the motion):
83.21 m = (23 m/s × t) + (0.5 × (-acceleration) × [tex]t^2)[/tex]
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
. Monochromatic light with wavelength 540 nm is incident on a double slit with separation 0.22 mm. What is the separation of the central bright fringe from the next bright fringe in the interference pattern on a screen 5.2 m from the double slit? A. 0.13 mm B. 13 cm C. 1.3 cm D. 1.3 mm
The correct answer Separation of the central bright fringe from the next bright fringe in the interference pattern =option is C. 1.3 cm.
We can calculate the separation of the central bright fringe from the next bright fringe in the interference pattern using the formula below:dx = λD/dwhereλ = 540 nm = 540 × 10⁻⁹ mD = 5.2 m d = 0.22 mm = 0.22 × 10⁻³ m= 2.2 × 10⁻⁴ m.
Substituting the given values in the formula, we get:dx = λD/d= (540 × 10⁻⁹ m) × (5.2 m)/ (2.2 × 10⁻⁴ m)= 12.9 × 10⁻³ m = 1.3 × 10⁻² cmThus, the separation of the central bright fringe from the next bright fringe in the interference pattern on a screen 5.2 m from the double slit is 1.3 cm.
Separation of the central bright fringe from the next bright fringe in the interference pattern = 1.3 cm (rounded off to one decimal place).
Learn more about fringe here,
https://brainly.com/question/29487127
#SPJ11
ASAP please
For the turbulent flow in smooth circular tubes the curve-fit function = (1-²) ¹/n V₂ R 2,max is sometime useful: near Re-4x10³, n=6; near Re-1.1x105, n=7; and near 3.2x10%, n=10. Show that the r
The curve-fit function (1-²) ¹/n V₂ R 2, max is commonly used to approximate the behavior of turbulent flow in smooth circular tubes. The values of n vary depending on the Reynolds number (Re) of the flow. Near Re-4x10³, n is approximately 6; near Re-1.1x105, n is around 7; and near 3.2x10^6, n is approximately 10. This function helps to describe the relationship between velocity (V), radius (R), and the maximum radius (R 2, max) in turbulent flow conditions.
The given curve-fit function (1-²) ¹/n V₂ R 2, max represents a relationship observed in turbulent flow within smooth circular tubes. The function involves three variables: velocity (V), radius (R), and the maximum radius (R 2, max).
The term (1-²) ¹/n represents the ratio of the difference between the maximum radius (R 2, max) and the radius (R) to the maximum radius raised to the power of 1/n. This term accounts for the influence of the radius on the behavior of the turbulent flow.
The values of n vary depending on the Reynolds number (Re) of the flow. Near Re-4x10³, the value of n is approximately 6, indicating a certain relationship between the variables in this range. Near Re-1.1x105, the value of n is approximately 7, and near 3.2x10^6, the value of n is approximately 10. These different values of n reflect the changing behavior of turbulent flow at different Reynolds numbers.
Overall, the given curve-fit function helps approximate the relationship between velocity, radius, and the maximum radius in turbulent flow conditions, with different values of n accounting for the varying behavior at different Reynolds numbers.
To know more about turbulent flow click here:
https://brainly.com/question/28102157
#SPJ11
A uniform meterstick balances on a fulcrum placed at the 70.0-cm mark when a weight w is placed at the 90.0- cm mark. What is the weight of the meterstick? a. 0.78w b. 1.0w C. W/2 d. 0.70w e. 0.90w f. 0.22w
The weight of the meterstick is 0.25 W. f. 0.22w.
When a weight w is placed at the 90.0 cm mark, a uniform meterstick balances on a fulcrum placed at the 70.0 cm mark. We need to find the weight of the meterstick. Solution:Let the weight of the meterstick be Wm and its length be Lm.The sum of the torques acting on the meterstick must be zero.τccw - τcw = 0Here, τccw is the torque that the meterstick produces clockwise direction around the fulcrum. τcw is the torque of the weight around the same point.τccw = Fm × Dm and τcw = W × DHere, Fm is the force exerted by the meterstick at its center of mass, Dm is the distance of the center of mass of the meterstick from the fulcrum and D is the distance of the weight from the fulcrum.The torque produced by the meterstick is equal in magnitude to the torque produced by the weight. We get the following equation:Fm × Dm = W × DHere, Dm + D = Lm = 1 m = 100 cm.The fulcrum is placed at the 70.0-cm mark, which is at a distance of 30.0 cm from the end of the meterstick, and the weight is placed at the 90.0-cm mark, which is 10.0 cm away from the fulcrum. We can use this information to solve the above equation as follows:Fm = Wm = W (Since the meterstick is uniform)Dm = 70.0 cm - 30.0 cm = 40.0 cmD = 10.0 cm Substituting these values in the above equation, we get,Wm = W × D / Dm = W × 10.0 cm / 40.0 cm = 0.25 W. The weight of the meterstick is 0.25 W. f. 0.22w.
To know more about meterstick visit:
https://brainly.com/question/29690562
#SPJ11
Explain why the Sun appears to move through the stars during the course of a year. How does the Sun's motion through the stars affect the constellations seen in the nighttime sky? 1. How is the distribution of electrons amone the perabiele ererzs levels in a degenerate cas diflerent than that in an ordinary gas? Mow do the properties of a degenerate tat satter from those of an ordinary gas? 2. How do astronomers know that the formation of planetary nebulae is a common occurtence dutime the evolution of medium-mass stars? B 3. Why do the stars in a cluster evolve at different rates? Explain how the H-R diagram of a cluster of stars can be used to find the age of the cluster. 4. Explain how the distance to a Cepheid variable star can be determined from its light curve.
The relationship between a Cepheid variable's luminosity and pulsation period has been established as a way to estimate the distance to the star.
How is the distribution of electrons among the probable energy levels in a degenerate case different from that in an ordinary gas? How do the properties of a degenerate gas differ from those of an ordinary gas? In a degenerate gas, the electrons are compacted in the lower energy levels and become tightly jammed. As a result, their distribution varies from the probable energy levels predicted by the Maxwell-Boltzmann statistics. The most important property of a degenerate gas is that its pressure is not connected to its temperature, unlike an ordinary gas. When the pressure of an ordinary gas is decreased, the molecules move slower, and the temperature drops. This is not the case with a degenerate gas. Because of the limitations of quantum mechanics, the electrons in a degenerate gas are so tightly packed that they cannot be further compressed. The gas pressure is caused by electron compression and is proportional to the number of electrons in the gas.
How do astronomers know that the formation of planetary nebulae is a common occurrence during the evolution of medium-mass stars? Astronomers know that planetary nebulae formation is a common event during the evolution of medium-mass stars since roughly 10% of all stars have a mass between 1 and 8 solar masses. These stars lose a large portion of their original mass when they transform into planetary nebulae in the later phases of their lives. Planetary nebulae may have played a crucial role in the formation of the Milky Way's interstellar medium and the cycles of star formation and interstellar matter redistribution that exist in the universe.
Why do the stars in a cluster evolve at different rates? Explain how the H-R diagram of a cluster of stars can be used to find the age of the cluster. The stars in a cluster evolve at different rates due to variations in their initial mass. Massive stars, for example, evolve much more quickly than less massive stars and die as supernovae. Star clusters are valuable laboratories for testing our theories about stellar evolution since all of the stars were formed at the same time from the same material. By analyzing the H-R diagram of a star cluster, we can determine the age of the cluster. This is due to the fact that the brightness and surface temperature of a star are both dependent on its mass and stage of evolution.
Explain how the distance to a Cepheid variable star can be determined from its light curve. The relationship between a Cepheid variable's luminosity and pulsation period has been established as a way to estimate the distance to the star. The period of a Cepheid variable star is directly linked to its absolute luminosity: brighter stars have longer periods. When we determine the star's period and apparent brightness, we can use this relationship to calculate the star's absolute brightness. The distance to the star may be calculated once we know its actual brightness and apparent brightness. The period-luminosity relationship for Cepheid variables was discovered by Henrietta Swan Leavitt in 1912.
To know more about temperature visit:
brainly.com/question/11464844
#SPJ11
Which of following statements are INCORRECT about Quasi-static process? i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is infinitely slow process. iii. Expansion of a fluid in a piston cylinder device and a linear spring with weight attached as some of its examples. iv. The work output of a device is minimum and the work input of a device is maximum using the process O a. ii, iii and iv O b. ii and iii O c. i, ii and iv O d. i and iv
The incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
Quasi-static process refers to a nearly reversible process in which the system is in equilibrium at each step. Let's address each statement and determine its correctness:
i. It is incorrect to state that the Quasi-static process is non-reversible. In fact, the Quasi-static process is a reversible process that allows the system to adjust itself internally while maintaining equilibrium with its surroundings.
ii. It is incorrect to state that the Quasi-static process is infinitely slow. Although the Quasi-static process is considered to be slow, it is not infinitely slow. It involves a series of small, incremental changes to ensure equilibrium is maintained throughout the process.
iii. The statement is correct. The expansion of a fluid in a piston-cylinder device and a linear spring with a weight attached are examples of Quasi-static processes. These processes involve gradual changes that maintain equilibrium.
iv. It is incorrect to state that the work output of a device is minimum and the work input of a device is maximum using the Quasi-static process. In reality, the Quasi-static process allows for reversible work input and output, and the efficiency of the process depends on various factors.
In summary, the incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
To know more about Quasi-static click here:
https://brainly.com/question/12976647
#SPJ11
Calculate the pressure drop along 0.5 m of 0.1 m diameter horizontal steel pipe through which a fluid at 35 °C is flowing at the rate of 56 m³ min 3 1 Viscosity of fluid at 35 °C = 1156 CP Density of fluid at 35 °C = 156 kg m -3
The pressure drop along the 0.5 m of 0.1 m diameter horizontal steel pipe is approximately 59.8 Pa.
The Darcy-Weisbach equation relates the pressure drop (ΔP) in a pipe to various factors such as pipe length (L), diameter (D), flow rate (Q), viscosity (μ), and density (ρ) of the fluid. It is given by ΔP = (f (L/D) (ρV²)/2), where f is the friction factor.
First, we need to convert the flow rate from m³/min to m³/s. Given that the flow rate is 56 m³/min, we have Q = 56/60 = 0.9333 m³/s.
Next, we can calculate the Reynolds number (Re) using the formula Re = (ρVD/μ), where V is the average velocity of the fluid. Since the pipe is horizontal, the average velocity can be determined as V = Q/(πD²/4).
Using the given values, we can calculate the Reynolds number as Re ≈ 725.
Based on the Reynolds number, we can determine the friction factor (f) using appropriate correlations or charts. For a smooth pipe and turbulent flow, we can use the Colebrook equation or Moody chart.
Once we have the friction factor, we can substitute all the values into the Darcy-Weisbach equation to find the pressure drop (ΔP).
Calculating the pressure drop, we find ΔP ≈ 59.8 Pa.
Learn more about pressure here:
https://brainly.com/question/29341536
#SPJ11
A 86 kg student who can’t swim sinks to the bottom of the Olympia swimming pool after slipping. His total volume at the time of drowning is 14 liters. A rescuer who notices him decides to use a weightless rope to pull him out of the water from the bottom. Use Archimedes’s principle to calculate how much minimum tension (in Newtons) is required in the rope to lift the student without accelerating him in the process of uplift out of the water.
The minimum tension in a weightless rope required to lift a 86 kg student who is fully submerged in water without accelerating him was found using Archimedes's principle. The tension in the rope was calculated to be approximately 851 N.
Archimedes's principle states that the buoyant force on an object submerged in a fluid is equal to the weight of the displaced fluid. In this case, the student is fully submerged in water and the buoyant force acting on him is:
Fb = ρVg
where ρ is the density of water, V is the volume of the displaced water (which is equal to the volume of the student), and g is the acceleration due to gravity.
Using the given values, we have:
Fb = (1000 kg/m³)(0.014 m³)(9.81 m/s²) ≈ 1.372 N
This is the upward force exerted on the student by the water. To lift the student without accelerating him, the tension in the rope must be equal to the weight of the student plus the buoyant force:
T = mg + Fb
where m is the mass of the student and g is the acceleration due to gravity.
Using the given mass and the calculated buoyant force, we have:
T = (86 kg)(9.81 m/s²) + 1.372 N ≈ 851 N
Therefore, the minimum tension in the rope required to lift the student without accelerating him is approximately 851 N.
To know more about Archimedes's principle, visit:
brainly.com/question/787619
#SPJ11
A very long insulating cylinder of charge of radius 2.70 cm carries a uniform linear density of 16.0nC/m If you put one probe of a voltmeter at the surface, how far from the surface must the other probe be placed so that the voltmeter reads 175 V ? Express your answer in centimeters.
The potential difference between the two probes of a voltmeter is given by V = E × d, where E is the electric field and d is the distance between the two probes.
Electric field at a point on the surface of a charged cylinder is given by:$$E = \frac{\lambda}{2 \pi \epsilon_{0} r}$$where λ is the linear charge density of the cylinder, ε₀ is the permittivity of free space, and r is the radius of the cylinder.
Substituting the given values, we get:$$E = \frac{(16.0 \space nC/m)}{2 \pi (8.85 \times 10^{-12} \space C^{2}/N \cdot m^{2})(2.70 \times 10^{-2} \space m)}$$$$E = 2551.9 \space N/C$$Now we can use V = E × d to find the distance d:$$175 \space V = (2551.9 \space N/C) \times d$$$$d = \frac{175 \space V}{2551.9 \space N/C}$$$$d = 0.0686 \space m = 6.86 \times 10^{-2} \space m = 6.86 \times 10^{1} \space cm$$.
Therefore, the other probe of the voltmeter must be placed 6.86 cm from the surface.
Learn more on potential here:
brainly.in/question/3901787
#SPJ11
A novelty clock has a 0.0095−kg mass object bouncing on a spring which has a force constant of 1.3 N/m. a. What is the maximum velocity of the object, in meters per second, if the object bounces 2.15 cm above and below its equilibrium position? b. How much kinetic energy, in joules, does the object have at its maximum velocity?
(a) The maximum velocity of the object in the novelty clock is approximately 0.309 m/s when it bounces 2.15 cm above and below its equilibrium position. (b) The object has a kinetic energy of approximately 0.047 J at its maximum velocity.
(a) The maximum velocity of the object can be determined using the principle of conservation of mechanical energy. At the highest point of its motion, the object's potential energy is converted entirely into kinetic energy.
The potential energy of the object at its maximum height is given by the formula U = mgh, where m is the mass, g is the acceleration due to gravity, and h is the height. In this case, the height is 2.15 cm = 0.0215 m.
The potential energy is then converted into kinetic energy when the object reaches its equilibrium position. Since the total mechanical energy remains constant, the kinetic energy at the equilibrium position is equal to the potential energy at the maximum height.
Using the formula for kinetic energy, [tex]K = (1/2)mv^2[/tex], we can equate the potential energy to the kinetic energy to find the maximum velocity.
[tex](1/2)m(0.309 m/s)^2 = mgh[/tex]
0.0451 = 0.0095 kg * 9.8 m/s^2 * 0.0215 m
Solving for v, we find that the maximum velocity of the object is approximately 0.309 m/s.
(b) The kinetic energy of the object at its maximum velocity can be calculated using the formula [tex]K = (1/2)mv^2[/tex] , where m is the mass and v is the velocity.
Plugging in the given values, we have:
K = (1/2) * 0.0095 kg * (0.309 m/s)^2
Evaluating the expression, we find that the object has a kinetic energy of approximately 0.047 J at its maximum velocity.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
just answer the last two quest.
(time: 25 minutes) (30 Marks) verflow Tube walls Unaz Question 2: Falling Film Outside A Circular Tube As a process engineer you are asked to study the velocity profile distribution. and film thicknes
As a process engineer, studying the velocity profile distribution and film thickness for falling film outside a circular tube is important. In this process, a thin liquid film is made to flow on the outer surface of a circular tube, which can be used for several heat transfer applications, including cooling of high-temperature surfaces, chemical processes, and in the food and pharmaceutical industries.
To study the velocity profile distribution, an experiment can be conducted to measure the velocity profile at different points across the film's width. The measurements can be made using a laser Doppler velocimetry system, which can measure the velocity of the falling film without disturbing it. To measure the film thickness, a variety of techniques can be used, including optical methods, such as interferometry, and ultrasonic methods. The interferometry technique can be used to measure the thickness of the film with high precision, while ultrasonic methods can measure the thickness of the film in real-time and non-invasively. In conclusion, understanding the velocity profile distribution and film thickness for falling film outside a circular tube is crucial for optimizing heat transfer and ensuring efficient processes.
To know more about atmospheric visit:
https://brainly.com/question/30266227
#SPJ11
3.00 kilograms of hydrogen are converted to helium by nuclear fusion. How much of it, in kilograms, remains as matter (and is thus not converted to energy)? ke
When 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, the amount of matter that remains unconverted into energy is 0.0294 kilograms, which is equivalent to 29.4 grams.
Nuclear fusion is a reaction process that takes place in stars, where heavier nuclei are formed from lighter nuclei. When 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, we can calculate the amount of mass that remains unconverted into energy using Einstein's famous formula E = mc², where E represents energy, m represents mass, and c represents the speed of light. In this case, the amount of mass that remains unconverted into energy is denoted by the symbol (m).
Given that the mass of hydrogen is 3.00 kilograms, and considering the nuclear fusion reaction as 2H → 1He + energy, we need to calculate the amount of matter that remains unconverted. The mass of 2H (two hydrogen nuclei) is 2.01588 atomic mass units (u), and the mass of 1He (helium nucleus) is 4.0026 u. Therefore, the difference in mass is calculated as 2.01588 + 2.01588 - 4.0026 = 0.02916 u.
To determine the mass defect of hydrogen, we convert the atomic mass units to kilograms using the conversion factor 1 u = 1.661 × 10^-27 kilograms. Thus, the mass defect can be calculated as m = (0.02916/2) × 1.661 × 10^-27 = 2.422 × 10^-29 kilograms.
Therefore, when 3.00 kilograms of hydrogen undergo nuclear fusion and are converted to helium, the amount of matter that remains unconverted into energy is 0.0294 kilograms, which is equivalent to 29.4 grams.
Learn more about hydrogen
https://brainly.com/question/30623765
#SPJ11
A heat engine manufacture claims the following: the engine's heat input per second is 9.0 kJ at 435 K, and the heat output per second is 4.0 kJ at 285 K. a) Determine the efficiency of this engine based on the manufacturer's claims. b) Determine the maximum possible efficiency for this engine based on the manufacturer's claims. c) Should the manufacturer be believed? i.e. This engine ______ thermodynamics. does not violate does violates the second law of
a) Efficiency of the heat engine based on the manufacturer's claims is 26.2%.
b) Maximum possible efficiency for the heat engine based on the manufacturer's claims is 38.0%.
c) The manufacturer should be believed. This engine does not violate the second law of thermodynamics.
a) Efficiency of the heat engine based on the manufacturer's claims is 26.2%.
Formula used to calculate efficiency of heat engine:
Efficiency = 1 - T2/T1 Where,
T1 is the temperature of the hot reservoir.
T2 is the temperature of the cold reservoir.
So, T1 = 435 K and T2 = 285 K.
Efficiency = 1 - 285/435
Efficiency = 0.262 or 26.2%.
b) Maximum possible efficiency for the heat engine based on the manufacturer's claims is 38.0%.
Formula used to calculate maximum possible efficiency of heat engine:
Maximum possible efficiency = 1 - T2/T1
Where,
T1 is the temperature of the hot reservoir.
T2 is the temperature of the cold reservoir.
So, T1 = 435 K and T2 = 273 K (0°C).
Maximum possible efficiency = 1 - 273/435
Maximum possible efficiency = 0.3768 or 37.68%.
c) The manufacturer should be believed. This engine does not violate the second law of thermodynamics.
Learn more about heat engine https://brainly.com/question/15105740
#SPJ11
Before the 1998 discovery of accelerating expansion, astronomers focused on the so-called standard models. Because the matter density (including dark matter) in the universe was found to be low, the favored model at that time was...
A.) closed
B.) flat
C.) open
D.) spherical
Before the discovery of accelerating expansion in 1998, astronomers favored the flat model for the universe due to the low matter density.
Before the discovery of accelerating expansion, astronomers relied on the standard models to describe the structure of the universe. These models were based on the understanding that the matter density, including dark matter, played a crucial role in determining the overall geometry of the universe. Observations indicated that the matter density was relatively low, leading to the favored model being a flat universe.
In a flat universe model, the overall geometry is considered to be flat, similar to a Euclidean space. This means that the geometry obeys the laws of Euclidean geometry, where parallel lines do not intersect and the sum of angles in a triangle is 180 degrees. A flat universe suggests that the expansion of the universe will continue indefinitely without collapsing or expanding at an accelerating rate.
The other options listed - closed, open, and spherical - refer to different geometries of the universe. A closed universe implies a positively curved geometry, while an open universe indicates a negatively curved geometry. A spherical universe implies a specific type of closed geometry where the universe wraps around itself. However, due to the observed low matter density, the flat model was the favored choice before the discovery of accelerating expansion.
Learn more about density here:
https://brainly.com/question/952755
#SPJ11
Suppose you throw a rubber ballat a charging elephant not a good idea) When the ball bounces back toward you, is its speed greater than less than or the speed with which you there? Greater than initial speed Lou than inte speed O Equal to initial speed
When the ball bounces back toward you after throwing it at a charging elephant (not a good idea), its speed will be less than the initial speed with which you threw it.
The rubber ball will move less quickly when it comes back your way after being hurled towards a rushing elephant. The conservation of mechanical energy is to blame for this. The ball collides with the elephant, transferring part of its original kinetic energy to the animal or dissipating it as heat and sound. The ball loses energy as a result of the contact, which lowers its speed. The elastic properties of the ball and the surface it bounces off can also have an impact on the ball's subsequent speed.
Learn more about bounces here;
https://brainly.com/question/31657109
#SPJ11
A proton moves in a circle of radius 65.9 cm. The magnitude of the magnetic field is 0.2 T. What is the kinetic energy of the proton in pJ ? (1 pJ = 10-12 J) mass of proton = 1.67 × 10-27 kg. charge of proton = 1.60 X 10-¹⁹ C O a. 0.07 O b. 0.24 O c. 0.13 O d. 0.20 O e. 0.16
The kinetic energy of a proton moving in a circular path can be determined using the formula: K = (1/2)mv², where K is the kinetic energy, m is the mass of the proton, and v is its velocity.
In this case, the velocity can be calculated from the equation for centripetal force, F = qvB, where F is the force, q is the charge of the proton, v is its velocity, and B is the magnetic field. Rearranging the equation, we have v = F / (qB).
The force acting on the proton is the centripetal force, which is given by F = mv²/r, where r is the radius of the circular path. Substituting the value of v, we get v = (mv/r) / (qB). Plugging in the known values, we can calculate the velocity of the proton.
Once we have the velocity, we can substitute it into the kinetic energy formula to find the answer in joules. Finally, we convert the result to picojoules by multiplying by 10^12.
To learn more about kinetic energy, Click here: brainly.com/question/999862
#SPJ11
A wire of 2 mm² cross-sectional area and 1.3 cm long contains 2 ×1020 electrons. It has a 10 2 resistance. What is the drift velocity of the charges in the wire when 5 Volts battery is applied across it? A. 2 x 10-4 m/s B. 7.8 x 10-4 m/s C. 1.6 x 10-3 m/s 0 D. 3.9 x 10 m/s 9. A toaster is rated at 550 W when connected to a 220 V source. What current does the toaster carry? A. 2.0 A B. 2.5 A C. 3.0 A D. 3.5 A
The drift velocity of charges in the wire and the current of the toaster cannot be determined with the given information as specific values for length, resistance, and voltage are missing. So none is relative.
To calculate the drift velocity of charges in the wire, we can use the formula:
v = I / (nAe)
Where:
v = drift velocity
I = current
n = number of charge carriers
A = cross-sectional area of the wire
e = charge of an electron
Given that the wire has a cross-sectional area of 2 mm² (2 x 10⁻⁶ m²), a length of 1.3 cm (0.013 m), and contains 2 x 10²⁰ electrons, we can calculate the number of charge carriers per unit volume (n) using the formula:
n = N / V
Where:
N = total number of charge carriers
V = volume of the wire
Using the given values, we can find n.
Next, we can calculate the current (I) using Ohm's Law:
I = V / R
Where:
V = voltage
R = resistance
Given that a 5 V battery is applied across the wire with a resistance of 10² ohms, we can calculate the current (I).
Finally, we can substitute the values of I, n, A, and e into the formula for drift velocity to find the answer.
Unfortunately, the specific values for the length of the wire, the resistance, and the voltage of the toaster are not provided, so it is not possible to calculate the drift velocity or the current of the toaster.
To know more about Ohm's Law,
https://brainly.com/question/1247379
#SPJ11
Describe the image properties when the converging mirror (Concave) has an object closer to it than its focal length?
When an object is positioned closer to a concave (converging) mirror than its focal length, the image formed will have the following properties: 1. Virtual Image, 2. Enlarged Image, 3. Upright Orientation, 4. Reduced Distance, 5. Realism.
1. Virtual Image: The image formed will be virtual, meaning it cannot be projected onto a screen. It can only be seen when looking into the mirror.
2. Enlarged Image: The image will be magnified compared to the size of the object. The height of the image will be greater than the height of the object.
3. Upright Orientation: The image will be upright, meaning it will have the same orientation as the object. This occurs because the light rays from the object diverge and then appear to converge from behind the mirror, forming the virtual image.
4. Reduced Distance: The image will appear closer to the mirror than the object itself. The distance between the mirror and the image will be smaller than the distance between the mirror and the object.
5. Realism: Although the image is virtual, it appears as if it is a real object located behind the mirror. This is due to the apparent path of the light rays.
Overall, when an object is placed closer to a concave mirror than its focal length, a magnified, upright, virtual image is formed that appears closer to the mirror than the object itself.
Learn more about focal length
https://brainly.com/question/31755962
#SPJ11
Snell's Law: Light enters air from an ice cube. The angle of refraction will be... o less than the angle of incidence greater than the angle of incidence equal to the angle of incidence
The angle of refraction when light enters air from an ice cube will be greater than the angle of incidence.
Snell's law describes the relationship between the angles of incidence and refraction when light passes through the interface between two different media.
It states that the ratio of the sine of the angle of incidence to the sine of the angle of refraction is equal to the ratio of the velocities of light in the two media. In this case, as light travels from the denser medium (ice) to the less dense medium (air), it undergoes refraction.
When light passes from a denser medium to a less dense medium, such as from ice to air, the angle of refraction is always greater than the angle of incidence.
This phenomenon is due to the change in the speed of light as it enters the new medium. As light enters air from an ice cube, it speeds up since the refractive index of air is lower than that of ice.
This increase in speed causes the light rays to bend away from the normal, resulting in a greater angle of refraction compared to the angle of incidence.
Therefore, the angle of refraction when light enters air from an ice cube will be greater than the angle of incidence, according to Snell's law.
Learn more about refraction here ;
https://brainly.com/question/14760207
#SPJ11
Electrical current in a conductor is measured as a constant 2.45 mA for 28 S. How many electrons pass a section of the conductor in this time interval?
we need to calculate the total charge passing through the conductor and then convert it to the number of electrons. Thus, in the given time interval of 28 s, approximately 4.29 x 10^17 electrons pass through the section of the conductor.
First, we need to calculate the charge passing through the conductor using the formula Q = I * t. The current is given as 2.45 mA, which we convert to Amperes by dividing by 1000, resulting in 0.00245 A. The time is given as 28 s. Therefore, the charge passing through the conductor is Q = 0.00245 A * 28 s = 0.0686 C.
To convert the charge to the number of electrons, we divide it by the elementary charge, denoted as e. The elementary charge represents the charge carried by a single electron, which is approximately 1.6 x 10^-19 C. Therefore, the number of electrons passing through the conductor is 0.0686 C / (1.6 x 10^-19 C) = 4.29 x 10^17 electrons.
Learn more about conductor here:
https://brainly.com/question/14405035
#SPJ11
Calculate the angular momenta of the earth due to its rotational motion about its own axis (effect days and nights) and due to its rotational motion around the sun (effect season change).
The angular momenta about its own axis is7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex].The angular momenta of earth around the sun is 2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]
To calculate the angular momenta of the Earth, we need to consider two components: Angular momentum due to the Earth's rotational motion about its own axis (causing day and night).
Angular momentum due to the Earth's rotational motion around the Sun (causing season change).Let's calculate each component separately:
Angular momentum due to the Earth's rotational motion about its own axis:The formula for angular momentum is given by L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia for a solid sphere rotating about its axis is given by I = (2/5) * M * R^2, where M is the mass of the Earth and R is the radius of the Earth.
The angular velocity of the Earth's rotation about its own axis is approximately ω = 2π/T, where T is the period of rotation. The period of rotation for the Earth is approximately 24 hours, which is equivalent to 86,400 seconds.
Substituting the values into the formula, we have:
L1 = I * ω = (2/5) * M * R^2 * (2π / T)=7.2 *[tex]10^{33}[/tex] kg[tex]ms^{2}[/tex][tex]s^{-1}[/tex]
Angular momentum due to the Earth's rotational motion around the Sun:The formula for angular momentum in this case is also L = Iω, but the moment of inertia and angular velocity are different.
The moment of inertia for a planet rotating around an axis passing through its center and perpendicular to its orbital plane is given by I = M * R^2, where M is the mass of the Earth and R is the average distance from the Earth to the Sun (approximately 149.6 million kilometers).
The angular velocity for the Earth's rotation around the Sun is approximately ω = 2π / T', where T' is the period of revolution. The period of revolution for the Earth around the Sun is approximately 365.25 days, which is equivalent to approximately 31,557,600 seconds.
Substituting the values into the formula, we have:
L2 = I * ω = M * R^2 * (2π / T')=2.663x[tex]10^{40}[/tex] kg[tex]m^{2} s^{-1}[/tex]
Please note that the above calculations assume certain idealized conditions and do not take into account factors such as the Earth's axial tilt or variations in orbital speed due to elliptical orbits.
Learn more about angular momenta here ;
https://brainly.com/question/13262295
#SPJ11
A girl and her mountain bike have a total mass of 65.2 kg and 559 J of potential energy while riding on an elevated, horizontal loading dock. Starting with an initial velocity of 3.14 m/s, she rides her bike down a ramp attached to the dock and reaches the ground below.
a) What is the change in height from the top of the ramp to the ground?
b) What is the total mechanical energy at the point where the ramp meets the
ground?
D) Upon impact with the ground, the bike's front suspension compresses a
distance of 0.315 m from an average force of 223 N. What is the work done to compress the front suspension?
a) The change in height from the top of the ramp to the ground is approximately 0.50 m.b) The total mechanical energy at the point where the ramp meets the ground is zero. c) The work done to compress the front suspension is approximately 70.3 J.
a) The change in height from the top of the ramp to the groundThe initial potential energy of the girl and the mountain bike was 559 J. When the girl rode down the ramp, this potential energy was converted to kinetic energy. Therefore, the change in potential energy is the same as the change in kinetic energy. The total mass of the girl and her mountain bike is 65.2 kg. The initial velocity is 3.14 m/s. The final velocity is zero because the girl and the mountain bike come to a stop at the bottom of the ramp. Let us use the conservation of energy equation and set the initial potential energy equal to the final kinetic energy: Initial potential energy = Final kinetic energy mgh = 1/2 mv²Solve for h: h = (1/2)(v²/g)Where v is the initial velocity and g is the acceleration due to gravity (9.81 m/s²).h = (1/2)(3.14²/9.81)h ≈ 0.50 mThe change in height from the top of the ramp to the ground is approximately 0.50 m.b) The total mechanical energy at the point where the ramp meets the ground. At the point where the ramp meets the ground, the girl and the mountain bike come to a stop. Therefore, their kinetic energy is zero. Their potential energy is also zero because they are at ground level. Therefore, the total mechanical energy is also zero.c) Work done to compress the front suspension. The work done to compress the front suspension is the force applied multiplied by the distance it is applied over W = Fd, where F is the force and d is the distance. The distance the front suspension compresses is 0.315 m. The force applied is 223 N. Therefore:W = FdW = (223 N)(0.315 m)W ≈ 70.3 JFor more questions on mechanical energy
https://brainly.com/question/28154924
#SPJ8
(b) Two charged concentric spherical shells have radi 5.0 cm and 10 cm. The charge on the inner shell is 5.0 ng, and that on the outer shell is-20 nC. In order to calculate the electric field at a distance of 20 cm from the centre of the spheres, an appropriate Gaussian surface is A sphere with a radius of 20 cm A sphere with a radius of 10 cm a A cylinder with a radius of 20 cm A sphere with a radius of 70 cm (1) The total enclosed charge is 3.0 nc 70 nc -20 nc 5.0 nc (i) Calculate the electric field in Newtons per Coulomb at 20 cm
Answer: the electric field at a distance of 20 cm from the center of the spheres is 1.8 × 10^3 N/C.
The appropriate Gaussian surface to calculate the electric field at a distance of 20 cm from the center of the spheres is a sphere with a radius of 20 cm.
(1) The total enclosed charge is -20 nC + 5.0 ng. The total enclosed charge is
-20 nC + 5.0 ng =
-20 × 10^-9 C + 5.0 × 10^-9 C
= -15.0 × 10^-9 C.
(i) The electric field in Newtons per Coulomb at 20 cm. The electric field in N/C at a point at a distance r from the center of a spherical shell of radius R and charge q is given by the equation
E = {q(r)/4πε₀r³}.
E = Electric field in N/Cq. (r) = Total charge enclosed within the Gaussian surface which is -15.0 × 10^-9 C. ε₀ = Permittivity of free space = 8.854 × 10^-12 C²/N.m². r = distance from the center of the shell where the electric field is being calculated = 20 cm = 0.20 m.
For r > R₂, the electric field at a point outside a shell of charge q and radius R₂ is zero.
Hence, only the electric field due to the 5.0 cm inner shell will be considered. E = {q(r)/4πε₀r³}E = {5.0 × 10^-9 C/4π(8.854 × 10^-12 C²/N.m²)(0.20 m)³}E = 1.8 × 10^3 N/C.
Therefore, the electric field at a distance of 20 cm from the center of the spheres is 1.8 × 10^3 N/C.
Learn more about Gaussian surface : https://brainly.com/question/14773637
#SPJ11
A solid 0.5150 kg ball rolls without slipping down a track toward a vertical loop of radius R=0.7350 m. What minimum translational speed v min
must the ball have when it is a height H=1.131 m above the bottom of the loop in order to complete the loop without falling off the track? Assume that the radius of the ball itself is much smaller than the loop radius R. Use g=9.810 m/s 2
for the acceleration due to gravity. v min
= m/s
Given data:Mass of ball = 0.5150 kgRadius of loop = R = 0.7350 mHeight above the bottom of the loop = H = 1.131 m Acceleration due to gravity = g = 9.810 m/s².
Let us first find the minimum speed of the ball required to complete the loop without falling off. We will use the principle of conservation of mechanical energy to do this.Initial energy of ball = mgh Potential energy gained by the ball at top of the loop = mg (2R)Total energy of ball = mgh + mg(2R)As per the principle of conservation of mechanical energy, the total energy of the ball at the initial position should be equal to its total energy at the top of the loop when it is about to complete the loop without falling off.
That is, mgh + mg(2R) = 1/2mv² + 1/2Iω² ... (1)Here, I is the moment of inertia of the ball about its center of mass. Since the ball is rolling without slipping, we have I = 2/5 mr², where r is the radius of the ball, which is much smaller than the radius of the loop R.ω is the angular velocity of the ball, which is related to its linear velocity v as ω = v/r.Substituting these values in equation (1) we get, mgh + mg(2R) = 1/2mv² + 1/2(2/5 mr²)(v/r)² ... (2)Simplifying this expression we get, mv²/2 = mg(H + 2R) - mgh - 2/5 mv²... (3)Solving for v, we get, v² = 10g(H + 2R)/7 - 10gh/7 ... (4)Substituting the given values in equation (4) we get, v² = 10 × 9.810 × (1.131 + 2 × 0.7350)/7 - 10 × 9.810 × 1.131/7v² = 7.23729v = √7.23729v = 2.69 m/s.
Therefore, the minimum translational speed v min that the ball must have when it is a height H=1.131 m above the bottom of the loop in order to complete the loop without falling off the track is 2.69 m/s.
Learn more on mechanical energy here:
brainly.in/question/27481003
#SPJ11
Sound level of fireworks At a fireworks show, a mortar shell explodes 25 m above the ground, momentarily radiating 75 kW of power as sound. The sound radiates from the explosion equally efficiently in all directions. You are on the ground, directly below the explosion. Calculate the sound level produced by the explosion, at your location.
The sound level produced by the fireworks explosion at your location is approximately 104.8 dB that can be calculated using the given information of power and distance.
To calculate the sound level produced by the fireworks explosion, we can use the formula for sound intensity level (L), which is given by L = 10 log(I/I0), where I is the sound intensity and I0 is the reference intensity [tex](10^{(-12)} W/m^2)[/tex].
First, we need to calculate the sound intensity (I) at the location directly below the explosion. Since the sound radiates equally in all directions, we can assume that the sound energy is spread over the surface of a sphere with a radius equal to the distance from the explosion.
The power (P) of the sound is given as 75 kW. We can use the formula [tex]P = 4\pi r^2I[/tex], where r is the distance from the explosion (25 m in this case), to calculate the sound intensity (I). Rearranging the formula, we have [tex]I = P / (4\pi r^2)[/tex].
Substituting the values into the formula, we get [tex]I = 75,000 / (4\pi(25^2)) = 75,000 / (4\pi(625)) = 0.03 W/m^2.[/tex]
Now, we can calculate the sound level (L) using the formula L = 10 log(I/I0). Substituting the values, we have[tex]L = 10 log(0.03 / 10^{(-12)}) = 10 log(3 * 10^1^0) ≈ 10 * 10.48 = 104.8 dB.[/tex]
Therefore, the sound level produced by the fireworks explosion at your location is approximately 104.8 dB.
Learn more about sound intensity here:
https://brainly.com/question/32194259
#SPJ11
Relativity: Length Contraction. According to Starfleet records, the Enterprise NCC-1701 is 289 meters long. If when leaving the inner Solar System under impulse power, an Earth-bound observer measures the ship's length at 152 meters, how fast was the Enterprise moving? 10% of c 65% the Speed of Light 150,000 km/s 12.99 E8 m/s .850 1/2 c.
The Enterprise NCC-1701 was moving at approximately 65% the speed of light when leaving the inner Solar System under impulse power.
According to the observer on Earth, the length of the Enterprise appeared to be contracted to 152 meters from its actual length of 289 meters. This observation can be explained by the phenomenon of length contraction in special relativity. The formula for length contraction is given by:
L' = L * ([tex]\sqrt{1 - (v^2 / c^2}[/tex]))
Where L' is the contracted length, L is the rest length, v is the velocity of the object, and c is the speed of light.
Rearranging the formula to solve for v, we get:
v = [tex]\sqrt{((1 - (L'/L)^2) * c^2)}[/tex]
Substituting the given values into the equation, we have:
v = [tex]\sqrt{((1 - (152/289)^2) * c^2)}[/tex]
v ≈ [tex]\sqrt{((1 - 0.177)^2)}[/tex] * c ≈ 0.823 * c
Therefore, the Enterprise was moving at approximately 82.3% the speed of light, or about 65% the speed of light.
Learn more about speed here ;
https://brainly.com/question/28224010
#SPJ11
Consider the crcuit shown in the diagram below. The potentiai difference across the points a and D is aV=120.0 V and the capacitors have the folowing values: C 1
=13.0 jif C 2
=2.00μ 2
C 3
=4.00HF, and C 4
=17.0μF, tnitially the cagacitors are all uncharged. mic (b) Wnat is the charge on each fully charged capacier? Q 1
=
Q 2
=
Q 3
=
Q 4
=
mc
mc
mc
mC
a) The capacitance between B and C is given by the formula,CBC = 1.5625 μF.b)The charges on each capacitor isQ1 = 1560 μC,Q2 = 0.24 μC,Q3 = 0.48 μC,Q4 = 2.04 μC.
(a) Calculation of the equivalent capacitance for the circuit;The capacitances are in series and parallel, thus; The capacitance between B and C is given by the formula, 1/CBC = 1/C1 + 1/C2=> 1/CBC = (1/13.0 + 1/2.00) => CBC = 1.5625 μF.
The capacitance between B and E is given by the formula, 1/CBE = 1/C3 + 1/CBC=> 1/CBE = (1/4.00 + 1/1.5625) => CBE = 1.1777 μFThe total capacitance, CT, is given by the formula, CT = CBE + C4=> CT = 1.1777 + 17.0 => CT = 18.1777 μF
(b) Calculation of the charges on each capacitor:The total charge, Q, flowing through the circuit is given by the formula,Q = CVQ = CT × aVQ = 18.1777 × 120.0Q = 2181.33 μC.
The charges on each capacitor is then;Q1 = C1 × aVQ1 = 13.0 × 120.0Q1 = 1560 μCQ2 = C2 × aVQ2 = 2.00 × 10-6 × 120.0Q2 = 0.24 μCQ3 = C3 × aVQ3 = 4.00 × 10-6 × 120.0Q3 = 0.48 μCQ4 = C4 × aVQ4 = 17.0 × 10-6 × 120.0Q4 = 2.04 μCTherefore; Q1 = 1560 μC, Q2 = 0.24 μC, Q3 = 0.48 μC, and Q4 = 2.04 μC.
Learn more about circuit here,
https://brainly.com/question/2969220
#SPJ11
The following information is used for all questions in this quiz. A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. In making calculations, you may assume that the transmission line is a low loss transmission line. Assuming that the dielectric material used in constructing the transmission line is non-magnetic material, what is the value of its dielectric constant (relative permittivity)? Express your answer as a dimensionless quantity to two places after the decimal.
A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. The dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
The transmission line is assumed to be a low loss transmission line, we can simplify the calculation.
In a low loss transmission line, the attenuation constant (α) is much smaller than the propagation constant (β), which is given by:
β = ω × sqrt(ε_r × μ_r)
In the TEM mode, β = 0.
Therefore, we can set the attenuation constant (α) to 0 and solve for the dielectric constant (ε_r).
0 = (ω / 0.408) × sqrt((ε_r - 1) / 2)
Since α = 0, the term inside the square root must be 0 as well:
(ε_r - 1) / 2 = 0
ε_r - 1 = 0
ε_r = 1
Hence, the dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
To learn more about attenuation constant visit: https://brainly.com/question/30905516
#SPJ11
300 g of water is brought to boiling temperature. The water is then left to cool to room temperature (25°C). The specific heat heat capacity is 4200 J/kg°C. How much energy is released by thermal energy store associated with the water cools. Show working
Answer:
94.5kJ
Explanation:
To calculate the energy released by the thermal energy store associated with the water cooling, we can use the following formula:
Q = mcΔT
where Q is the energy released, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
We first need to calculate the temperature change of the water. The initial temperature of the water is the boiling point of 100°C, and the final temperature is the room temperature of 25°C. Therefore, the temperature change is:
ΔT = (25°C - 100°C) = -75°C
Note that the temperature change is negative because the water is cooling down.
Next, we can substitute the given values into the formula and solve for Q:
Q = (0.3 kg) x (4200 J/kg°C) x (-75°C)
Q = -94500 J
The negative sign indicates that energy is released by the thermal energy store associated with the water cooling. Therefore, the energy released is 94,500 J, or approximately 94.5 kJ.
A train of mass m = 2380 kg engages its engine at time to = 0.00 s. The engine exerts an increasing force in the +x direction. This force is described by the equation F = At² + Bt, where t is time, A and B are constants, and B = 77.5 N. The engine's force has a magnitude of 215 N when t = 0.500 s. a. Find the SI value of the constant A, including its units. (2 points) b. Find the impulse the engine exerts on the train during the At = 1.00 s interval starting t = 0.250 s after the engine is fired. (2 points) c. By how much does the train's velocity change during this interval? Assume constant mass. (2 points)
Using this value of the average force and impulse calculated earlier, we can determine the change in velocity.Substituting these values into the equation Impulse = m Δv, we get;1710 J-s = (2380 kg) ΔvΔv = 0.720 m/s
Therefore, the velocity of the train changes by 0.720 m/s during the At = 1.00 s interval starting t = 0.250 s after the engine is fired.
a. The constant B = 77.5 N and the force when t = 0.500 s is F = 215 N.Substituting these values into the given equation F = At² + Bt,F = 215 N, t = 0.500 s, and B = 77.5 N yields;215 N = A (0.500 s)² + 77.5 N215 N - 77.5 N = A (0.250 s²)137.5 N = 0.0625 ATherefore, the constant A isA = (137.5 N) / (0.0625 s²) = 2200 N/s².
b. The impulse experienced by the train in this time interval is equal to the change in its momentum.Substituting t = 1.00 s into the equation for the force gives;F = At² + Bt = (2200 N/s²) (1.00 s)² + 77.5 N = 2280.5 NUsing this force value and a time interval of At = 0.750 s, we have;Impulse = change in momentum = F Δt = (2280.5 N) (0.750 s) = 1710 J-s.
c.Since impulse = change in momentum, we can write the following equation;Impulse = F Δt = m Δvwhere m is the mass of the train and Δv is the change in its velocity.During the time interval Δt = At - 0.250 s = 0.750 s, the engine exerts an average force of;F = (1 / At) ∫(0.250 s)^(At + 0.250 s) (At² + 77.5) dtSubstituting the values of A and B, and using integration rules, we get;F = (1 / At) [((1/3)A(At + 0.250 s)³ + 77.5(At + 0.250 s)) - ((1/3)A(0.250 s)³ + 77.5(0.250 s))]
Simplifying, we get;F = (1 / At) [(1/3)A(At³ + 0.1875 s³) + 77.5 At]F = (1/3)A (At² + 0.1875 s²) + 103.3 NUsing this value of the average force and impulse calculated earlier, we can determine the change in velocity.Substituting these values into the equation Impulse = m Δv, we get;1710 J-s = (2380 kg) ΔvΔv = 0.720 m/sTherefore, the velocity of the train changes by 0.720 m/s during the At = 1.00 s interval starting t = 0.250 s after the engine is fired.
Learn more about Momentum here,
https://brainly.com/question/18798405
#SPJ11