The correct answer is "Earth rotates once each day." This explains about explains why the stars visible in our sky just after sunset are different from those visible just before sunrise.
The reason why the stars visible in our sky just after sunset are different from those visible just before sunrise is that Earth rotates on its axis once every 24 hours.
As Earth rotates, different parts of the sky come into view, while others disappear below the horizon. So, as the Earth rotates, the stars visible in the sky change throughout the night.
Additionally, Earth's orbit around the Sun causes the position of the stars to shift slightly over the course of the year, but this motion is much slower than the rotation of the Earth and is not the primary reason for the difference in the stars visible before sunrise and after sunset.
Learn more about Earth here:
https://brainly.com/question/12041467
#SPJ4
a spherical object orbiting the sun that has objects of similar mass orbiting nearby or crossing its path is a
A spherical object orbiting the sun that has objects of similar mass orbiting nearby or crossing its path is a dwarf planet.
A celestial entity that circles the sun and has enough mass to produce a spherical shape but has not completely purified its orbit of other trash or smaller particles is referred to as a dwarf planet. Dwarf planets, in contrast to planets, are said to circle other celestial bodies like asteroids and comets. Five dwarf planets in our solar system have been designated by the International Astronomical Union (IAU) : Ceres, Pluto, Haumea, Makemake, and Eris. These objects are categorized as a different category of solar system bodies because they are thought to be distinct from planets.
While dwarf planets have certain characteristics with planets, they lack the gravitational dominance necessary to be considered genuine planets. They are sufficiently massive to cause their self-gravity to draw them in a nearly circular form, but they have not yet swept other debris from their orbit.
Hence, a spherical object orbiting the sun that has objects of similar mass orbiting nearby or crossing its path is a dwarf planet.
To learn more about dwarf planets, refer to:
https://brainly.com/question/6681223
#SPJ4
If you pull something horizontally at a constant speed with a force meter, what is the net force on the object?
The forces operating on the thing in question are considered to be into equilibrium when there is no net force on it.
What is the best way to define acceleration?The rate at which velocity changes is referred to as acceleration. velocity change over time is measured by acceleration (a). As a result, any change in direction or speed will result in a change to velocity, which will then result in acceleration.
The acceleration formula as what?According for the equation that a = v/t, acceleration (a) equals the product of the alteration in velocity (v) and a change in time (t).
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ1
GOTTA DO A SCIENCE PROJECT PLS HELP! Directions
Now that the lab is complete, it is time to write your lab report. The purpose of this guide is to help you write a clear and concise report that summarizes the lab you have just completed.
The lab report is composed of two sections:
Section I: Overview of Investigation
Provide background information.
Summarize the procedure.
Section II: Observations and Conclusions
Include any charts, tables, or drawings required by your teacher.
Include answers to follow-up questions.
Explain how the investigation could be improved.
To help you write your lab report, you will first answer the four questions listed below based on the lab that you have just completed. Then you will use the answers to these questions to write the lab report that you will turn in to your teacher.
You can upload your completed report with the upload tool in formats such as OpenOffice.org, Microsoft Word, or PDF. Alternatively, your teacher may ask you to turn in a paper copy of your report or use a web-based writing tool.
Questions
Section I: Overview of Lab
What is the purpose of the lab?
The Purpose of the lab is to displace water to determine volume. And weigh objects to get mass. Then we would divide the two and get density.
What procedure did you use to complete the lab?
Outline the steps of the procedure in full sentences.
The procedures I used for lab are
1. One should have the knowledge of loab assignments to make the lab experiment easier
2. To be aware about safety equipment and their uses in lab, like-the location of fire extinguisher in lab.
3. To know the steps of experiments to be prepared.
4. To write notes on a notebook of lab with information regarding the experiment
5. One should review the data sheets of chemicals material safety.
6. To put on all the necessary dressing to peform experiment.
7. To have compelete understanding aout the experiment.
And that's all.
Section II: Observations and Conclusions
What charts, tables, or drawings would clearly show what you have learned in this lab?
Each chart, table, or drawing should have the following items:
An appropriate title
Appropriate labels
I have learned to center on the page, number in the order they appear in the text, reference in the order they appear in the text, label with the table number and descriptive title above the table, label with column and row labels that describe the data, and include units of measurement.
If you could repeat the lab and make it better, what would you do differently and why?
There are always ways that labs can be improved. Now that you are a veteran of this lab and have experience with the procedure, offer some advice to the next scientist about what you suggest and why. Your answer should be at least two to three sentences in length.
If I could repeat lab and make it better I would have optimized the space for lab equiment, label places to put minor equiment, have drawers under the lab counter, and train new researchers before they use the reactives and the lab equipment.
Writing the Lab Report
Now you will use your answers from the four questions above to write your lab report. Follow the directions below.
Section I: Overview of Lab
Use your answers from questions 1 and 2 (above) as the basis for the first section of your lab report. This section provides your reader with background information about why you conducted this lab and how it was completed. It should be one to two paragraphs in length.
Section II: Observations and Conclusions
Use your answers from questions 3 and 4 (above) as the basis for the second section of your lab report. This section provides your reader with charts, tables, or drawings from the lab. You also need to incorporate your answers to the follow-up questions (from the Student Guide) in your conclusions.
Overall
When complete, the lab report should be read as a coherent whole. Make sure you connect different pieces with relevant transitions. Review for proper grammar, spelling, punctuation, formatting, and other conventions of organization and good writing.
Section I: Overview of Investigation
The purpose of this lab was to determine the volume and mass of various objects, and then calculate their density. To achieve this, we used a displacement method for measuring volume and weighed the objects to obtain their mass. The procedure involved several steps, including understanding the lab assignment, being aware of safety equipment and their uses, knowing the steps of the experiment, taking notes on a lab notebook, reviewing the data sheets of chemical material safety, wearing the necessary safety gear, and having a complete understanding of the experiment.
Section II: Observations and Conclusions
In this lab, we used charts and tables to clearly display the data we collected. Each chart and table included an appropriate title, labels, and units of measurement. These visuals helped us better understand the relationship between the volume, mass, and density of the objects we analyzed.
If we were to repeat this lab and improve upon it, we would optimize the space for lab equipment, label areas for placing minor equipment, incorporate drawers under the lab counter, and train new researchers before they use the reactives and lab equipment. These improvements would make the lab environment more organized and efficient, and ensure that everyone involved has a clear understanding of the procedures and safety precautions.
for more such questions on Investigation
https://brainly.com/question/2115801
#SPJ11
a mass of 1.53 kg is attached to a spring and the system is undergoing simple harmonic oscillations with a frequency of 1.95 hz and an amplitude of 7.50 cm. what is the total mechanical energy of the system?
A mass of 1.53 kg is attached to a spring and the system is undergoing simple harmonic oscillations with a frequency of 1.95 hz and an amplitude of 7.50 cm. The total mechanical energy of the system is 0.198 J.
The total mechanical energy of a system undergoing simple harmonic oscillations can be calculated using the formula:
E = (1/2) kA²
where E is the total mechanical energy of the system, k is the spring constant, and A is the amplitude of the oscillation.
To calculate the spring constant, you can use the formula:
k = (4π²m)/T²
where m is the mass attached to the spring, and T is the period of the oscillation, which can be calculated using the formula:
T = 1/f
where f is the frequency of the oscillation.
Substituting the given values into these formulas, we have:
k = (4π² × 1.53) / (1/1.95)²= 70.59 N/m
E = (1/2) × 70.59 × (0.075)²= 0.198 J
Therefore, 0.198 J is the total mechanical energy of the system.
For more such questions on mechanical energy, click on:
https://brainly.com/question/29803154
#SPJ11
) what type of materials in terms of specific heat that work best for building envelopes in hot arid regions?
In hot arid regions, materials with low specific heat are the best for building envelopes. Specific heat refers to the amount of heat energy required to raise the temperature of a material by a certain amount.
Materials with low specific heat require less energy to raise their temperature, which means they heat up quickly during the day but also cool down rapidly at night. This is important in hot arid regions where temperatures can fluctuate drastically between day and night.
Some materials that work well in hot arid regions include adobe, rammed earth, and straw bale, as they have low specific heat and can help regulate the temperature inside the building.
Additionally, using insulation materials with low thermal conductivity, such as foam insulation or straw bale, can also help keep the building cool during the day and warm at night.
To know more about hot arid regions refer here:
https://brainly.com/question/12615379#
#SPJ11
if a violin string vibrates at 400 hz as its fundamental frequency, what are the frequencies of the first four harmonics?
The first four harmonics of a violin string vibrating at 400 Hz are 400 Hz, 800 Hz, 1200 Hz, and 1600 Hz, with each harmonic having a frequency that is a multiple of the fundamental frequency.
The first four harmonics of a violin string, which has a fundamental frequency of 400 Hz, can be computed as follows: The basic frequency, 400 Hz, is represented by the first harmonic, where n = 1. The frequency of the second harmonic (n = 2) is two times that of the main frequency. Consequently, the second harmonic's frequency is: 400 Hz + 2 f1 = 2 = 800 Hz The frequency of the third harmonic (n = 3) is three times that of the main frequency. Consequently, the third harmonic's frequency is: 400 Hz + 3 f1 = 3 = 1200 Hz The frequency of the fourth harmonic (n = 4) is four times that of the main frequency. Consequently, the fourth harmonic's frequency.
Learn more about harmonics here:
https://brainly.com/question/30198365
#SPJ4
under what condition is the angular momentum of an object conserved? under what condition is the angular momentum of an object conserved? if there is no net torque acting on it. if it is a point particle. if there is no net force acting on it. if there are no torques acting on it.
The angular momentum of an object conserved A. if there is no net torque acting on it.
Angular momentum is defined as the rotational analog of linear momentum, which is a measure of the amount of rotation an object has. The law of conservation of angular momentum states that the angular momentum of an object is conserved when there is no external torque acting on the object.
Mathematically, it can be expressed as, L = IωWhere L is the angular momentum of an object, I is its moment of inertia, and ω is its angular velocity. The angular momentum of an object is conserved when there is no net torque acting on it. This means that the total external torque acting on an object must be zero. If there is no external torque acting on an object, its angular momentum will be conserved, meaning that it will remain constant in magnitude and direction over time.
If an object experiences a torque, its angular momentum will change, and the rate of change of angular momentum will be equal to the magnitude of the torque acting on the object. Hence, if there is no net torque acting on an object, the angular momentum of that object will be conserved. An object that has no net force acting on it is not necessarily conserved, since it may still experience a torque that will cause its angular momentum to change.
However, if an object is a point particle, it can be treated as having zero moments of inertia, and its angular momentum will be conserved if there is no net torque acting on it. Therefore the correct option is A
The Question was Incomplete, Find the full content below :
under what condition is the angular momentum of an object conserved?
a. if there is no net torque acting on it.
b. if it is a point particle.
c. if there is no net force acting on it.
d. if there are no torques acting on it
Know more about law of conservation here:
https://brainly.com/question/29128837
#SPJ11
a penny is dropped from the top of a tall stairwell. what is the velocity of the penny after it has fallen for 2 s? show your work.
Explanation:
Vf = Vo + at Vo = 0 a = 9.81 m/s t = 2
Vf = 0 + 9.81 (2) = 19.62 m/s
The velocity of the penny after it has fallen for 2 seconds is approximately 19.6 m/s.
When an object is dropped from rest, its velocity increases due to the acceleration of gravity. The acceleration of gravity on Earth is approximately 9.8 m/s².
The distance fallen by the penny after 2 seconds can be calculated using the formula:
d = 1/2 * g * t²
where d is the distance fallen, g is the acceleration due to gravity, and t is the time elapsed.
Substituting the values, we get:
d = 1/2 * 9.8 m/s² * (2 s)²
d = 19.6 m
Thus, the penny falls a distance of 19.6 meters in 2 seconds.
The velocity of the penny can be calculated using the formula:
v = √(2 * g * d)
where v is the velocity of the penny and d is the distance fallen.
Substituting the values, we get:
v = √(2 * 9.8 m/s² * 19.6 m)
v = √(384.16)
v = 19.6 m/s (approximately)
Therefore, the penny's speed is around 19.6 meters per second when it has been falling for 2 seconds.
To know more about velocity, refer here:
https://brainly.com/question/30599695#
#SPJ11
4. How has the development of integrated photonics helped increase network
speeds?
The development of integrated photonics has been a key factor in increasing network speeds by enabling the transmission of large amounts of data over optical fibers.
What are integrated photonics?photonics refers to the technology of creating optical devices and systems using semiconductor fabrication techniques, similar to those used in the production of electronic integrated circuits.
One of the most significant contributions of integrated photonics to increasing network speeds is the creation of photonic integrated circuits (PICs). PICs are made up of multiple optical components, such as lasers, modulators, and detectors, integrated onto a single chip. This integration enables faster and more efficient communication between the components, reducing signal loss and improving overall performance.
Learn about integrated photonics here https://brainly.com/question/19538214
#SPJ1
An animal have a mass of 0.0000010 kg, kicks the ground, advances 0.77 mm and reaches a maximum height of 0.30 m. What is the animal's acceleration relative to Earth's gravity, and what is the external force exerted by the ground on the animal's feet? Consider parabolic path, and use the angle of the jumping (Hint use tan(theta)=4H/R, where H is the maximum height and R the range.
The animal's acceleration relative to Earth's gravity is approximately 0.188 m/s², and the external force exerted by the ground on the animal's feet is approximately 9.8x10⁻⁶N.
What exactly are kinematic formulae and what do you mean by them?Kinematics equations describe how input movement at one or more joints defines the configuration of a mechanical system, such as a robot manipulator, in order to accomplish a task position or end-effector location.
Using the specified highest height (H) and the animal's vertical displacement (d = 0.3 m), let's first determine the jump's range (R):
tan(theta) = 4H/R
tan(theta) = 4(0.3)/0.77
theta = tan⁻¹(1.558) = 57.24 degrees
x = d/tan(theta) = 0.3/tan(57.24) = 0.210 m
Now that we know the animal's maximum height (H) and the acceleration caused by gravity (g = 9.8 m/s2), we can determine its starting vertical velocity (v_iy):
H = v_iy²/(2g)
v_iy = √(2gH) = √(29.80.3) = 1.72 m/s
v_y = v_iy - gt
0 = v_iy - gt_max
t_max = v_iy/g = 1.72/9.8 = 0.1755 s
F = mg = (0.0000010 kg)(9.8 m/s²) = 9.8x10⁻⁶N
Now, using the horizontal displacement (x) and the maximum journey time (t_max), we can determine the animal's acceleration in relation to Earth's gravity:
x = 0.5at²
a = 2x/t_max²
= 2(0.00077 m)/(0.1755 s)²
= 0.188 m/s².
To know more about acceleration visit:-
https://brainly.com/question/12550364
#SPJ1
an electromagnetic wave has a frequency of 7.57 x 1014 hz, what is its wavelength? to what part of the spectrum does this wave belong?
An Electromagnetic wave has a frequency of 7.57 x 10^14 Hz. Its wavelength can be found using the formula:c = λfwhere c is the speed of light, λ is the wavelength, and f is the frequency.
Substituting the given values in the formula, we have:c = 3 x 10^8 m/sf = 7.57 x 10^14 Hzλ = ?λ = c/f = (3 x 10^8 m/s)/(7.57 x 10^14 Hz)= 3.95 x 10^-7 mTherefore, the wavelength of the electromagnetic wave is 3.95 x 10^-7 m.
To determine the part of the spectrum this wave belongs to, we can use the electromagnetic spectrum.The electromagnetic spectrum is a range of frequencies of electromagnetic radiation, which includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.
The frequency of the given electromagnetic wave falls within the visible light spectrum, making it a light wave. Therefore, the electromagnetic wave belongs to the visible light part of the spectrum.
To Learn More About Electromagnetic
https://brainly.com/question/24319848
#SPJ11
from the diameter and effective surface temperature of the sun, estimate the rate at which it emits energy. what fraction of this emitted energy is intercepted by the earth? estimate the solar constant, given the mean earth-sun distance
The rate at which the Sun emits energy is calculated using P = σ * A * T⁴. The fraction of emitted energy intercepted by Earth is (π * R_earth²) / (4 * π * R_earth-sun²). The solar constant is P * Fraction.
Step 1: Use the Stefan-Boltzmann Law
The Stefan-Boltzmann Law states that the power (energy emitted per unit time) of a blackbody is given by:
P = σ * A * T⁴
where P is the power, σ is the Stefan-Boltzmann constant (5.67 x 10⁻⁸ W/m²K⁴), A is the surface area, and T is the effective surface temperature.
Step 2: Calculate the surface area of the Sun
The surface area of a sphere is given by:
A = 4 * π * R²
where R is the radius. Since the diameter is given, we can find the radius as half of the diameter:
R = diameter / 2
Step 3: Calculate the power emitted by the Sun
Using the surface area and temperature, calculate the power:
P = σ * A * T⁴
Step 4: Calculate the fraction of emitted energy intercepted by Earth
The fraction of emitted energy intercepted by Earth can be found by calculating the ratio of the cross-sectional area of Earth to the surface area of a sphere with a radius equal to the Earth-Sun distance.
Fraction = (π * R_earth²) / (4 * π * R_earth-sun²)
Step 5: Estimate the solar constant
The solar constant is the amount of solar energy received per unit area at the mean Earth-Sun distance. It can be calculated using the power emitted by the Sun and the fraction of emitted energy intercepted by Earth:
Solar constant = P * Fraction
By following these steps, you can estimate the rate at which the Sun emits energy, the fraction of emitted energy intercepted by Earth, and the solar constant, given the diameter and effective surface temperature of the Sun and the mean Earth-Sun distance.
Know more about energy here:
https://brainly.com/question/30672627
#SPJ11
a car battery is rated at 89ah , meaning that it can supply a 89 a current for 1 h before being completely discharged. part a if you leave your headlights on until the battery is completely dead, how much charge leaves the battery? express your answer in coulombs.
The car battery has a rating of 89Ah, which implies that it can supply a current of 89 A for 1 hour before being completely discharged. If you leave your headlights on until the battery is completely dead, the amount of charge that leaves the battery is 320400 coulombs.
The amount of charge that leaves the battery is given by:
C = I × t
where C is the charge, I is the current, and t is the time taken.
In this case, the current I = 89 A and the time t = 1 hour = 3600 s
Therefore, the charge that leaves the battery is:
C = 89 A × 3600 s
C = 320400 C
Therefore, 320400 coulombs is The amount of charge that leaves the battery.
For more such questions on charge, click on:
https://brainly.com/question/25923373
#SPJ11
what are jet streams? what are jet streams? bands of low-speed wind found at elevations of 9-15 km bands of low-speed wind found at elevations of 5-9 km bands of high-speed wind found at elevations of 9-15 km bands of high-speed wind found at elevations of 5-9 km
Jet streams are bands of high-speed wind found at elevations of 9-15 km. This wind current, referred to as jet streams, is formed by a combination of atmospheric temperature, Earth's rotation, and pressure differences in the atmosphere.
What are jet streams, Jet streams are fast-flowing, narrow air currents located in the upper atmosphere or the troposphere, generally around 8 to 9 miles high in the Earth's atmosphere.
They are formed due to the combination of the Earth's rotation, temperature, and atmospheric pressure.The temperature of the air in the atmosphere decreases with increasing altitude. Because the Earth's rotation is faster at the equator than at the poles, the temperature difference causes high-altitude air to flow from west to east, resulting in a jet stream.
The band of high-speed wind called the jet stream can influence the weather in the areas they pass over. They push high and low-pressure systems around, affecting weather patterns. Jet streams are caused by differences in atmospheric pressure, Earth's rotation, and atmospheric temperature.
For more such questions on Jet streams
brainly.com/question/24873179
#SPJ11
write an equation to help stacy find the gravitational force on an object if she knows the mass. in the equation let w represent gravitational force m represent mass and g represent the ratio you found in part s test your equation using a set of values from the table to be sure it works
The gravitational force on the object with a mass of 5 kg on the surface of the Earth is 49.05 N.
The equation that can help Stacy find the gravitational force on an object if she knows its mass is:
F = w = m x g
where:
F is the gravitational force (in Newtons, N)
m is the mass of the object (in kilograms, kg)
g is the acceleration due to gravity (in meters per second squared, [tex]m/s^2)[/tex]
The value of g varies depending on the location of the object, but on the surface of the Earth, it is approximately 9.81 [tex]m/s^2.[/tex]
To test the equation using a set of values from the table, let's say we have an object with a mass of 5 kg. Using the value of g on the surface of the Earth, we can calculate the gravitational force on the object as:
F = 5 kg x 9.81[tex]m/s^2[/tex]
F = 49.05 N.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ1
explain why a patch of light appears at a specific point on the floor
Answer:
a patch of light appears at a specific point on the floor due to reflection from a nearby surface. This phenomenon occurs due to the law of reflection, which states that when light hits a surface, it reflects off at an angle equal to the angle at which it struck.
Explanation:
please follow po and u can ask me for help.
A copy machine uses a lens to make an image of a page in the physics textbook to print a copy. When the print is regular size, both the book and its image are 16.0 cm from the lens.
What is the focal length of this lens?
If the lens is moved so that it is 24 cm from the book, what is the distance to the new image?
This new image will be magnified, reduced, or the same size compared to the original book?
How do you know?
when light transmits through a refractive medium from air (like an air-water or a air-plastic interface) what happens to the speed of light, its frequency, and its wavelength?
When light transmits through a refractive medium from air (like an air-water or an air-plastic interface) the speed of light decreases, while its frequency and wavelength remain constant.
Light is an electromagnetic wave that travels at a constant speed through a vacuum or a transparent medium. The frequency, wavelength, and speed of light are characteristics of this wave.
When light enters a refractive medium, such as air or water, it bends because its velocity changes due to the refractive index of the medium it is passing through.
Speed of light in different mediums
The speed of light is always slower when it passes through a refractive medium.
Light's frequency and wavelength remain constant
When light travels from air to another medium, such as water or plastic, its frequency and wavelength remain constant. Because these variables are properties of the wave and not influenced by the medium, this is the case.
When light enters a denser medium, the distance between its peaks remains constant, so its wavelength remains constant.
Similarly, because frequency is the number of peaks passing through a point per unit of time, it remains constant regardless of the medium.
For similar question on frequency
https://brainly.com/question/254161
#SPJ11
in 1897, a refracting telescope was built at the yerkes observatory in williams bay, wisconsin. at the time it was the largest telescope in the world, and is actually used till this day. the telescope has an objective lens of 1 m diameter with the focal length of 19 m. what should the focal length of the eyepiece lens be to give a magnification of magnitude 250?
The focal length of the eyepiece lens should be 0.076 m to give a magnification of magnitude 250.According to the magnification formula, Magnification = focal length of the objective lens / focal length of the eyepiece lens.
Magnification = 250focal length of the objective lens = 19 m Magnification = focal length of the objective lens / focal length of the eyepiece lens.250 = 19 / focal length of the eyepiece lens Rearranging the above equation to get the focal length of the eyepiece lens: focal length of the eyepiece lens = 19 / 250focal length of the eyepiece lens = 0.076 m Therefore, the focal length of the eyepiece lens should be 0.076 m to give a magnification of magnitude 250.
To achieve a magnification of 250 with a telescope at Yerkes Observatory in Wisconsin, you can use the formula.
Learn more about here;
https://brainly.com/question/16188698
#SPJ4
a merry-go-round is a common piece of playground equipment. a 2.77 diameter merry-go-round with a mass of 264 kg is spinning at 24 rpm. john runs tangent to the merry-go-round at 4.44 m/s, in the same direction that it is turning, and jumps onto the outer edge. john's mass is 35.4 kg. what is the merry-go-round's angular velocity, in rpm, after john jumps on?
A 264 kg merry-go-round spinning at 24 rpm has its angular velocity reduced to 14.3 rpm after a 35.4 kg person jumps on.
To tackle this issue, we really want to utilize protection of precise energy. At first, the carousel is turning at a specific precise speed and has a specific snapshot of dormancy. At the point when John bounces onto the carousel, he expands the snapshot of inactivity, which makes the carousel delayed down. Notwithstanding, since precise energy is monitored, the result existing apart from everything else of dormancy and rakish speed should stay steady.
To begin with, we should track down the snapshot of idleness of the carousel:
I =[tex](1/2)mr^2[/tex]
where
m = 264 kg (mass of the carousel)
r = 1.385 m (span of the carousel, which is half of the width)
I = [tex](1/2)(264 kg)(1.385 m)^2[/tex] = 255 kg[tex]m^2[/tex]
Then, how about we convert the underlying precise speed of the carousel from rpm to rad/s:
w_i = (24 rpm)(2π rad/1 rev)(1 min/60 s) = 2.51 rad/s
The underlying precise force of the framework is then:
L_i = Iw_i = (255 kg [tex]m^2[/tex])(2.51 rad/s) = 642.05 kg [tex]m^2/s[/tex]
At the point when John hops onto the carousel, the snapshot of inactivity of the framework increments to:
I_f = I + m*[tex]r^2[/tex]
where
m = 35.4 kg (mass of John)
r = 1.385 m (span of the carousel)
I_f = (264 kg)[tex](1.385 m)^2[/tex] + (35.4 kg)[tex](1.385 m)^2[/tex]= 429.78 kg [tex]m^2[/tex]
To find the last precise speed of the framework, we can utilize protection of rakish energy:
L_i = L_f
Iw_i = I_fw_f
Settling for w_f, we get:
w_f = (Iw_i)/I_f = (255 kg [tex]m^2/s[/tex])(2.51 rad/s)/(429.78 kg [tex]m^2[/tex]) = 1.50 rad/s
At long last, we can change over the last precise speed from rad/s back to rpm:
w_f = (1.50 rad/s)(60 s/2π rad)(1 fire up/1 turn) = 14.3 rpm
Consequently, the rakish speed of the carousel, in rpm, after John hops on is 14.3 rpm.
To learn more about angular velocity, refer:
https://brainly.com/question/14076005
#SPJ4
1) a) What is the total resistance of three resistors connected in series if they have values of R1 20 ohm, R2 = 30 ohm and R3 = 10 ohm?
Answer:
60 Ω
Explanation:
When when there is a series connection, the resistances of the resistors are added together;
R = R1 + R2 + R3
R = 20 Ω + 30 Ω + 10 Ω = 60 Ω
Please Help! Thanks!
Study the scenario.
System 1 has a large number of particles, moving slowly on average. System 2 has a smaller number of particles, but they are moving faster on average.
Which system has a higher temperature?
Responses:
There is not enough data to tell. The larger number of particles in System 1 may or may not outweigh the increase in movement in System 2.
System 1 has a higher temperature because the particles are moving slowly. The particles in System 1 have greater kinetic energy than System 2.
System 1 has a higher temperature because there are more particles. A greater number of particles have more kinetic energy than a smaller number of particles.
System 2 has a higher temperature because the particles are moving with greater speed. The particles in System 2 have greater kinetic energy than System 1.
System 2 has a higher temperature because the particles are moving with greater speed. The particles in System 2 have greater kinetic energy than System 1.
What is kinetic energy?
Kinetic energy is a form of energy that an object possesses by virtue of its motion. It is defined as the energy an object possesses due to its motion and is determined by its mass and velocity. The greater an object's mass and velocity, the greater its kinetic energy.
What is velocity?
Velocity is a vector quantity that describes the rate at which an object changes its position in a specific direction. It is defined as the displacement of an object per unit of time and is measured in meters per second (m/s) or other appropriate units of distance over time. Velocity takes into account both the speed of the object and its direction of motion, making it a more precise measurement than speed.
To know more about kinetic energy, visit:
https://brainly.com/question/26472013
#SPJ1
A starter cord for a generator is 1m long. It is wound on to a drum with a diameter of 10cm. A person starts pulling with a force of 100N. How much work does he do?
The person does 31.4 Joules of work when pulling the starter cord.
To calculate the work done by the person pulling the starter cord, we need to find the distance that the cord moves as it is pulled.
The circumference of the drum can be calculated as:
C = 2πr = 2 x 3.14 x 0.1m = 0.628m
So, each complete turn of the drum will wind or unwind the cord by a distance of 0.628m.
Assuming that the person pulls the cord with a constant force of 100N, the work done can be calculated as:
Work = Force x Distance
where distance is the length of cord pulled.
Since the cord is wound on the drum, the distance pulled will be equal to the length of the cord unwound from the drum.
Length of cord unwound = π x diameter of drum
= π x 10cm = 0.314m
Therefore, the work done by the person is:
Work = Force x Distance = 100N x 0.314m = 31.4 Joules (J)
Learn more about distance here:
https://brainly.com/question/15172156
#SPJ1
tha a) Name the type of logic gate shown in a Figure 5.88a. Write down its truth table. b) Show that when its two inputs are joined together as in Figure 5.88b it will act as a NOT gate.
The logic gate in figure 5.88a is NAND gate. When two inputs are joined together it will act as a NOT gate. This is shown in figure 5.88b.
What is the truth table of NAND gate? How do both inputs joined give a NOT gate?A truth table is a table that shows the output of a logic gate for all possible combinations of its input values.
a. Truth table of NAND gate is:
A B Output
0 0 1
0 1 1
1 0 1
1 1 0
b. When one input each is given to two different NOT gates and these two gates are connected to an AND gate, a NOT gate is formed.
This is the truth table for these gates:
A B ~A ~B ~A AND ~B
0 0 1 1 1
0 1 1 0 0
1 0 0 1 0
1 1 0 0 0
As you can see from the truth table, the output of the AND gate is 1 (logic high) only when both inputs to the NOT gates are 0 (logic low). In all other cases, the output of the AND gate is 0 (logic low). Therefore, the output of the entire circuit is the negation of the input A. This is the behavior of a NOT gate.
Learn more about logic gates here:
https://brainly.com/question/13014505
#SPJ1
The image of the question is attached.
an increase in pressure of 6.00 x 10^4 pa os exerted uniformly all around a metal block with a volume of 2 x 10^-3 m^3. what is the change in volume of the block?
The change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³ by using bulk modulus.
The change in volume of the metal block can be calculated using the bulk modulus of the material, which relates the change in pressure to the change in volume. The bulk modulus is a measure of the resistance of a material to compression. The change in volume can be given as:
ΔV = -V(ΔP / B)
where ΔP is the change in pressure, B is the bulk modulus, and V is the original volume of the block.
Therefore,
ΔV = -(2 x 10⁻³ m^3)(6.00 x 10⁴ Pa / B)
To find B for the metal block, we need to know the material it is made of. Let's assume it is made of steel, which has a bulk modulus of approximately 160 GPa (gigapascals) or 1.6 x 10¹¹ Pa.
Substituting B = 1.6 x 10¹¹ Pa, we get:
ΔV = -(2 x 10⁻³ )(6.00 x 10⁴ Pa / 1.6 x 10¹¹ Pa) ≈ -7.5 x 10⁻⁸ m³
Note that the negative sign indicates a fall in volume, as expected since the pressure increase would cause the metal block to compress slightly.
Therefore, the change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³.
To learn more about bulk modulus, refer to:
https://brainly.com/question/10869375
#SPJ4
the diagram below is a ray diagram showing an object and its image after light rays from the object have interacted with a lens or mirror. what kind of lens or mirror was used to produce the image?
You can determine if it is a lens or a mirror by checking if the light rays pass through or bounce off the optical device. If the rays pass through, it's a lens; if they bounce off, it's a mirror.
It seems that there is a missing diagram. However, I can provide you with general guidelines to determine the type of lens or mirror used to produce the image in a ray diagram.
1. Identify the object and image positions: Look at the diagram and locate the object (usually represented by an arrow) and the image (represented by another arrow, usually a different colour).
2. Determine if the image is real or virtual: If the image is formed by the actual intersection of light rays, it is a real image. If it is formed by the apparent intersection of light rays, it is a virtual image.
3. Determine if the image is upright or inverted: If the image arrow points in the same direction as the object arrow, the image is upright. If the image arrow points in the opposite direction, the image is inverted.
4. Determine if the image is magnified or reduced: Compare the height of the object and image arrows. If the image arrow is taller, the image is magnified. If the image arrow is shorter, the image is reduced.
Now, based on these properties, you can identify the type of lens or mirror used:
- If the image is real, inverted, and reduced, it could be a converging (convex) lens or a concave mirror.
- If the image is virtual, upright, and magnified, it could be a diverging (concave) lens or a convex mirror.
Once you have all this information, you can determine the type of lens or mirror used in the provided ray diagram.
For more such questions on mirror.
https://brainly.com/question/31097794
#SPJ11
light from a laser of wavelength 780 nm falls on a diffraction grating containing 3300 lines per centimeter. what are the angles of the principle maxima?
The required angle of principle maxima when wavelength and diffraction grating are given is calculated to be 15.07°.
The wavelength is given as 780 nm = 780 × 10⁻⁹ m
It is given that the diffraction grating contains 3300 lines per centimetre.
Distance between the slits d = 1 cm/3300 lines = 10⁻² m/3300 lines = 3×10⁻⁶ m
The angles of principle maxima are to be found out.
We know that,
d sin θ = m λ
where,
d is the distance between slits
θ is the angle with respect to the path of the incident light
m is the order of interference
sin θ = m λ/d
θ = sin⁻¹(m λ/d) = sin⁻¹[(1× 780 × 10⁻⁹)/(3×10⁻⁶)] = sin⁻¹ (26× 10⁻²) = sin⁻¹(0.26) = 15.07°
To know more about light:
https://brainly.com/question/13148969
#SPJ4
a system releases 1 kj of heat and has 650 j of work done on it by the syrroundings. what is the change in the internal energy of the system
The change in internal energy of the system is -1650 J. This means that the internal energy of the system has decreased by 1650 J due to the heat leaving the system and the work done on the system by the surroundings.
The change in internal energy (ΔU) of the system can be calculated using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.
In this case, the system releases 1 kJ (1000 J) of heat, which means that Q = -1000 J (negative sign because heat is leaving the system). Additionally, 650 J of work is done on the system by the surroundings, which means that W = 650 J (positive sign because work is being done on the system).
Plugging these values into the equation above, we get:
ΔU = Q - W
ΔU = (-1000 J) - (650 J)
ΔU = -1650 J
Therefore, the change in internal energy of the system is -1650 J. This means that the internal energy of the system has decreased by 1650 J due to the heat leaving the system and the work done on the system by the surroundings.
For more such questions on internal energy , Visit:
https://brainly.com/question/30702359
#SPJ11
an air-core solenoid with 60 turns is 8.00 cm long and has a diameter of 1.20 cm. when the solenoid carries a current of 0.780 a, how much energy is stored in its magnetic field?
When the solenoid carries a current of 0.780 a, 0.00372 J energy is stored in its magnetic field
The energy stored in a magnetic field of an inductor (such as a solenoid) is given by:
U = (1/2) x L x [tex]I^2[/tex]
where U is the energy stored,
L is the inductance, and
I is the current flowing through the inductor.
To calculate the inductance of the solenoid, we can use the formula:
L = [tex]\frac{ (\mu_0 \times N^2 \times A)}{l}[/tex]
where [tex]\mu_0[/tex] is the permeability of free space (4π x [tex]10^{-7}[/tex] T·m/A),
N is the number of turns,
A is the cross-sectional area of the solenoid, and
l is the length of the solenoid.
The cross-sectional area of the solenoid is given by:
A = π x [tex]r^2[/tex]
where r is the radius of the solenoid (half of its diameter).
So, first, let's calculate the inductance:
r = 1.20 cm / 2 = 0.60 cm = 0.0060 m
A = π x [tex](0.0060 m)^2[/tex] = 1.13 x [tex]10^{-4}\: m^2[/tex]
l = 8.00 cm = 0.0800 m
N = 60
μ0 = 4π x [tex]10^{-7}[/tex] T·m/A
L = [tex]\frac{ (\mu_0 \times N^2 \times A)}{l}[/tex]
L = [tex]\frac{(4\pi \times 10^{-7} \times 60^2 \times 1.13 \times 10^{-4} ) }{0.0800 m}[/tex]
L = 0.0128 H
Now we can use the formula for the energy stored in the magnetic field:
U = (1/2) x L x [tex]I^2[/tex] = (1/2) x 0.0128 H x [tex](0.780 \:A)^2[/tex]
U = 0.00372 J
Therefore, the energy stored in the magnetic field of the solenoid is 0.00372 J.
For similar question on magnetic field
https://brainly.com/question/26257705
#SPJ11
if olaf catches the ball, with what speed vf do olaf and the ball move afterward? express your answer numerically in meters per second.
If Olaf catches the ball, the speed with which Olaf and the ball move afterward can be determined using the principle of conservation of momentum. The total momentum of a system remains constant if no external force acts on it.
the ball's momentum before being caught by Olaf equals the combined momentum of Olaf and the ball after the catch. The expression that represents this concept is pi= pf, where pi is the initial momentum of the ball (which is equal to the final momentum), and pf is the final momentum of the ball and Olaf. In general, momentum is defined as:p = mv where,m is the mass of the object in kg,v is the velocity of the object in m/sandp is the momentum of the object in kg m/s.Applying the conservation of momentum principle:pi= pf m1v1= m1v1'+m2v2', where,m1 is the mass of the ball,v1 is the velocity of the ball before being caught by Olaf,v1' is the velocity of the ball and Olaf after the catch,m2 is the mass of Olaf, andv2' is the velocity of Olaf after the catch.The velocity of Olaf before the catch is assumed to be zero because it is not mentioned in the problem statement. The problem statement asks for the velocity of Olaf and the ball after the catch, which we will represent asv1'.So, using the above formula, we get:0.5 × 3.0 kg × 20.0 m/s = 0.5 × 3.0 kg × v1' + 20.0 kg × 0 m/sHere,m1 = 0.5 kg, v1 = 20 m/s, m2 = 20 kg, andv2' = 0 m/sSolving forv1', we get:v1' = (0.5 × 3.0 kg × 20.0 m/s)/ (0.5 × 3.0 kg + 20.0 kg)= 2.73 m/sTherefore, if Olaf catches the ball, the speed with which Olaf and the ball move afterwards is 2.73 m/s.
Learn more about momentum here:
https://brainly.com/question/30487676
#SPJ11