Option-A: To act as a communications server is not a purpose for using hubs in a network.
The purpose of using hubs in a network is as follows:To connect network cables.To act as a junction box.To share the same multipoint circuit.A hub is a simple network device that connects network nodes, including computers, printers, and servers, to a local area network (LAN). The hub is commonly used to connect devices in a star or tree topology network.The hub is a passive device that receives data from one of its ports and sends it to all of its other ports. The network devices that are linked to the hub share the same bandwidth, which might result in slow data transfer.
In addition, the hub cannot filter or interpret data transmitted through it, making it more susceptible to network congestion and collisions among network devices.Hubs are frequently used in small office/home office (SOHO) networks to connect computers to the Internet. Hubs were commonly used in early Ethernet LANs, but they have been largely replaced by switches in modern networks.Thus,the correct answer is Option-A.
For such more questions on communications :
brainly.com/question/30266856
#SPJ11
define a function convertweight() that takes one integer parameter as totalmilligrams, and two integer parameters passed by reference as grams and milligrams. the function converts totalmilligrams to grams and milligrams. the function does not return any value.
The correct answer is The function convertweight() takes one integer parameter totalmilligrams as input and two integer parameters grams and milligrams as output parameters passed by reference. The purpose of the function is to convert the given totalmilligrams into grams and milligrams and store them in the respective output parameters.
The function can be defined in Python as follows:
ef convertweight(totalmilligrams, grams, milligrams):
grams[0] = totalmilligrams // 1000 # calculate grams
milligrams[0] = totalmilligrams % 1000 # calculate milligrams
Here, we are using floor division (//) to calculate the number of grams, which is the integer division of totalmilligrams by 1000. The remainder of this division is the number of milligrams, which we can obtain using the modulo (%) operator. The calculated grams and milligrams values are then stored in their respective output parameters using the indexing notation.To use this function, we can call it as follows:
totalmilligrams = 2500
grams = [0] # create a list with one element for output parameter
milligrams = [0] # create a list with one element for output parameter
convertweight(totalmilligrams, grams, milligrams)
print("Grams:", grams[0]) # output the calculated grams
print("Milligrams:", milligrams[0]) # output the calculated milligrams
In this example, we are passing the totalmilligrams value of 2500 and two output parameters (grams and milligrams) as lists with one element each. The function convertweight() will modify these output parameters to store the calculated values. Finally, we are printing the calculated grams and milligrams values.
To learn more about parameters click on the link below:
brainly.com/question/15119395
#SPJ1
non-wi-fi devices that use fhss (frequency-hopping spread spectrum) are capable of causing interference with wlans in which frequency range?
Non-wi-fi devices that use fhss (frequency-hopping spread spectrum) are capable of causing interference with wlans in the frequency range of 2.4 to 2.5 GHz ISM
What is the frequency range about?Non-Wi-Fi devices that use FHSS (Frequency-Hopping Spread Spectrum) may cause interference with WLANs (Wireless Local Area Networks) that operate in the 2.4 GHz frequency range. This frequency range is commonly used by Wi-Fi networks, and FHSS devices operating within this range may cause interference by transmitting signals on the same frequencies that Wi-Fi networks use.
Therefore, FHSS devices hop between frequencies in the 2.4 GHz range, which can cause interference with Wi-Fi networks that operate on a single frequency or a few frequencies within this range. However, many modern Wi-Fi networks use a different spread spectrum technique called DSSS (Direct-Sequence Spread Spectrum) or OFDM (Orthogonal Frequency Division Multiplexing).
Learn more about frequency range from
https://brainly.com/question/28089103
#SPJ1
is an environment where processors are embedded in objects that communicate with one another via the internet or wireless networks. a. the internet of things b. an intelligent workplace c. augmented reality d. assistive technology
Option-A:The Internet of Things (IoT) is an environment where processors are embedded in objects that communicate with one another via the internet or wireless networks.
These objects can be anything from everyday appliances to vehicles, and they can be used to send and receive data to create a connected network. IoT is often used in home automation systems and smart cities to improve efficiency and reduce energy usage. Additionally, IoT technology is being utilized in fields such as healthcare, transportation, and agriculture, to make our lives easier. Augmented reality (AR) is a technology that superimposes digital elements onto the physical world, allowing users to interact with their surroundings.
AR can be used in various industries such as healthcare, gaming, and retail to provide more immersive experiences. Finally, assistive technology (AT) refers to technology used to improve the lives of people with disabilities. AT can range from simple devices such as wheelchairs and hearing aids to complex systems such as artificial intelligence (AI) and robotics. AT helps improve accessibility, independence, and communication for those with disabilities.Thus,the correct answer is option-A.
For such more questions on processors :
brainly.com/question/614196
#SPJ11
suppose we want to push an item to the front of a vector. what is the efficiency of such an operation
The efficiency of pushing an item to the front of a vector is A. linear time.
When we want to push an item to the front of a vector, we need to make space for the new element by shifting all the existing elements one position to the right. This means that each element in the vector needs to be moved to its next adjacent position, starting from the back of the vector and moving towards the front.
For example, suppose we have a vector of size n, and we want to push a new element to the front of the vector. The following steps are required:
Shift element n-1 to position 0.Shift element n-2 to position 1.Shift element n-3 to position 2....Shift element 1 to position n-2.Shift element 0 to position n-1.As we can see, each element in the vector needs to be moved one position to the right, which requires n-1 operations. Therefore, the time complexity of pushing an item to the front of a vector is proportional to the size of the vector, which is O(n), or linear time.
Learn more about data structures and algorithms:24268720
#SPJ11
Your question is incomplete, but probably the complete question is :
Suppose we want to push an item to the front of a vector. What is the efficiency of such an operation?
A. linear time
B. constant time
C. exponential time
D. polynomial time
E. quadratic time
which optional argument of the addtotals command changes the label for row totals in a table?rowlabelfieldnamefieldformatlabel
The addtotals command's label argument, which is optional, modifies the label for a table's row totals.
What is meant by label argument?Each parameter is written in the function call with its argument label preceding it; the argument label is used when calling the function. In order to implement the function, the argument name is used. Parameters label their arguments by default using the name of the parameter. There must be a distinct name for each parameter. Remember that arguments and parameters are two different things: The names given in the definition of the function are the parameters. Real values provided to the function are considered its arguments. The values of the given arguments are used to initialise the parameters. It's possible for a function to need a cell reference as its third argument in addition to a text string and a number as its first argument. There may be several different types of arguments.To learn more about label argument, refer to:
https://brainly.com/question/29980139
suppose that we are continuously transmitting packets from earth to moon and the 5th packet is lost and no other packets or acks are lost. how many and which packets get retransmitted?
Suppose that we are continuously transmitting packets from Earth to Moon and the 5th packet is lost and no other packets or acks are lost.
Know how many and which packets get retransmitted! In the case of TCP, packet loss is an issue.
If a packet is lost, TCP will retransmit it, and the receiving side will resend the lost ACK packet to the transmitting side. Therefore, packets that must be retransmitted and received by the receiving party include: 4th packet because the 5th packet is lost, and the receiving end only receives packets up to the last correctly received packet, which is the 4th packet at this moment. So, the 5th packet should be retransmitted.Learn more about packets visit:
https://brainly.com/question/13901314
#SPJ11
if you want to design an application-layer protocol that provides fast, efficient communication and doesn't work with large amounts of data, what transport-layer protocol would you design it to use? flashcard machine
To design an application-layer protocol that provides fast, efficient communication and doesn't work with large amounts of data, it is recommended to use the User Datagram Protocol (UDP) as the transport-layer protocol.
UDP is a connectionless, unreliable protocol, which makes it suitable for applications that require fast delivery and don't rely on a connection being established. UDP is designed for short, lightweight messages and doesn't provide the same reliability as other transport-layer protocols such as Transmission Control Protocol (TCP). UDP can send messages quickly and with little overhead, making it an ideal choice for applications that need to send small amounts of data quickly, such as flashcard machine applications. Additionally, UDP does not provide any congestion control or reliability, meaning that applications that rely on high accuracy and need to send large amounts of data should use a different transport-layer protocol, such as TCP.
Learn more about User Datagram Protocol:https://brainly.com/question/20038618
#SPJ11
12. Write the output of the following program: CLS LET PI = 3.14 LET R = 5 LET Area = PI*R*R PRINT Area. END
what windows server role or services are needed to configure a windows server into a network router? (choose all that apply.)
The Windows Server roles and services needed to configure a Windows Server into a network router are the Routing and Remote Access service (RRAS), the Network Address Translation (NAT) service, and the Windows Firewall with Advanced Security.
The RRAS service is used to enable the Windows Server to act as a router on a network. It provides routing and network address translation (NAT) services, such as dynamic host configuration protocol (DHCP) server services, IPsec policy enforcement, and VPN gateway functions.
The NAT service provides the ability to perform Network Address Translation (NAT) for both IPv4 and IPv6 networks. This enables the Windows Server to provide private IP addresses for the computers connected to it, which can then be connected to the Internet.
Finally, the Windows Firewall with Advanced Security must be configured properly to allow traffic from the Internet to private IP addresses. This will ensure the security of the network and allow the computers connected to the Windows Server to access the Internet.
So, the correct answer to the question "what windows server role or services are needed to configure a windows server into a network router? (choose all that apply.) Routing and Remote Access service (RRAS), the Network Address Translation (NAT) service, and the Windows Firewall with Advanced Security" is all of these applicable to the windows server role.
You can learn more about Windows Server at: brainly.com/question/30478285
#SPJ11
consider all 8 packets in this pcap file. taken together, are they part of a connection-oriented message between two endpoints? why or why not?
Yes, all 8 packets in the pcap file are part of a connection-oriented message between two endpoints because this setup occurs between two endpoints, which are typically a client and a server.
A connection-oriented message is a message that requires a setup to occur before it can be sent. This setup is called a connection, which can be thought of as a temporary pipeline that allows data to flow between the two endpoints.
To establish a connection, three steps are required:
SYN is the first step in establishing a connection. A client sends an SYN (synchronize) packet to a server to begin the process.If the server accepts the SYN packet, it will send back an ACK (acknowledge) packet to confirm the connection establishment.The client acknowledges the connection by sending an SYN-ACK (synchronize-acknowledge) packet back to the server.The connection is now established, and data can begin to flow between the two endpoints. In the given pcap file, all 8 packets are TCP packets, which means that they use the Transmission Control Protocol (TCP) to communicate. TCP is a connection-oriented protocol, which means that it requires a connection to be established before any data can be sent.
Therefore, we can conclude that all 8 packets in the pcap file are part of a connection-oriented message between two endpoints.
You can learn more about the pcap file at: brainly.com/question/30738903
#SPJ11
which of the following is an advantage of a database compared to a file processing system? a.simpler recovery b.sharing of data c.fast processing of sequential data d.lower cost
One of the advantages of a database over a file processing system is the sharing of data. Therefore the correct option is option B.
A database system is a structured set of data stored in a computer or network. It is the core component of many data processing applications. This database system has a number of advantages over file processing systems. Databases have several benefits over file processing systems.
Databases also provide more robust means of data access management.
Simpler recovery: Databases have a more complicated recovery process than file processing systems. As a result, this choice is incorrect.
Sharing of data: The option correctly answers the question. This is a significant advantage of databases over file processing systems.
Fast processing of sequential data: Although databases are faster in processing data, they are not particularly good at processing sequential data. As a result, this option is incorrect.
Lower cost: Databases are more expensive to develop, maintain, and upgrade than file processing systems. As a result, this option is incorrect.
For such more question on database:
https://brainly.com/question/30009561
#SPJ11
is a stack a type of priority queue? if a stack is a type of priority queue, what item inside will receive the next out priority? g
The next item to be removed from a stack is the one that was most recently added. Likewise, priority queue and stack are different data structures that cannot be compared in terms of type.
A stack is not a type of priority queue. Priority queue and Stack are data structures that use different algorithms for storing and retrieving data. A priority queue is a collection of elements that allows storing and retrieval based on priority levels assigned to each element. In a priority queue, the item with the highest priority will receive the next out priority. In contrast, a stack follows the LIFO (Last In First Out) principle, where the last element added is the first element to be removed.
Learn more about stack here:
https://brainly.com/question/14257345
#SPJ11
help i don't know the answer
Answer:
The answer would be D but if it is all that apply it would be D,C,A
Can someone please tell me the answer
We can see here that in converting sound from analogue to digital, we have:
A. The x- axis is the horizontal line while the y-axis is the vertical.
B. A is Quantization
B is Encoding process.
C is Decoding process.
What is sound energy?Sound energy is a form of energy that is produced by vibrations or disturbances in matter that create waves of pressure that travel through a medium such as air, water, or solids. The energy of sound is related to the amplitude or intensity of the sound wave, which is the measure of the magnitude of the pressure fluctuations caused by the sound.
Sound energy is typically measured in units of decibels (dB), which represents the relative intensity of the sound compared to a standard reference level. Higher decibel levels correspond to higher sound energy and louder sounds.
Learn more about sound energy on https://brainly.com/question/30763236
#SPJ1
what is the primary benefit of using buffers for file i/o? question 1 options: the program runs faster. the program uses less memory. all input data is kept in the file until needed. all output data is immediately written to a file. the entire file is input at once.
The primary benefit of using buffers for file input/output (I/O) is that the program can run faster.
Buffers allow the program to read or write data from or to the file in larger, more efficient chunks instead of accessing the file one character or byte at a time. This reduces the number of system calls needed to perform I/O operations and can significantly improve the program's performance.
While using buffers may also help reduce memory usage by temporarily storing data in memory rather than reading or writing directly to the file, this is not the primary benefit of using buffers.
Similarly, using buffers does not necessarily mean that all input data is kept in the file until needed, nor does it guarantee that all output data is immediately written to a file.
The size and behavior of the buffer depend on the specific implementation and configuration of the I/O operation.
Using buffers does not imply that the entire file is input at once, as the buffer may be filled and emptied in smaller chunks depending on the needs of the program.
Learn more about buffer here:
https://brainly.com/question/30174606
#SPJ11
makani is participating in an on-the-job training program at work. he is learning how to configure computers in a network. he is told to use private ip addresses because all organizations could use them without conflict since they are not routable. if the addresses are not routable, he wonders, how will the computers have internet access?
Makani is participating in an on-the-job training program where he is learning about configuring computers in a network using private IP addresses. He wonders how the computers will have internet access is D. A NAT (Network Address Translation) router will translate a private address to a public one.
NAT is a method that enables devices on a private network to access the internet using a single public IP address. The NAT router is responsible for translating the private IP addresses of the computers within the network to a public IP address, which can be routed on the internet. When a computer within the private network wants to access the internet, it sends a request to the NAT router.
The NAT router takes note of the private IP address and port number of the requesting computer, then translates that information into a public IP address and port number. The router then sends the request to the internet on behalf of the private network. When a response is received, the NAT router translates the public IP address and port number back to the original private IP address and port number, ensuring that the response reaches the correct device within the network. Therefore, the correct option is D.
The question was incomplete, Find the full content below:
Makani is participating in an on-the-job training program at work. he is learning how to configure computers in a network. he is told to use private IP addresses because all organizations could use them without conflict since they are not routable. if the addresses are not routable, he wonders, how will the computers have internet access?
A. A proxy server will temporarily change the address on the host
B. It is private network so they will not have internet access
C. The DNS server will resolve the IP address to a public domain
D. A NAT router will translate a private address to a public one
Know more about NAT (Network Address Translation) here:
https://brainly.com/question/13105976
#SPJ11
what should you do when you receive a brief communication that the format of input files will change from next month?
When you receive a brief communication that the format of input files will change from next month, it is essential to take some steps like Acknowledge the message,Verify the details,Assess the impact,Update your procedures,Communicate with stakeholders.
1. Acknowledge the message: You should send a response acknowledging the message to let the sender know that you have received the communication. This will help to prevent any misunderstandings and ensure that the sender is aware that you are aware of the change.2. Verify the details: Verify the details of the communication, including the date when the new format will take effect, and the specific changes that will be made. It is essential to ensure that you understand the details of the communication fully.
3. Assess the impact: Assess the impact of the change on your work processes, including any potential risks or disruptions. This will help you to identify any areas that may require additional attention or resources to address the change.4. Update your procedures: Update your procedures to reflect the new input file format. This will help you to ensure that you can continue to work efficiently and effectively with the new format.
5. Communicate with stakeholders: Communicate with stakeholders, including customers, suppliers, and other partners, to let them know about the change and any potential impact on their work processes. This will help you to avoid any potential disruptions and maintain good relationships with your stakeholders.
For such more questions on input files:
brainly.com/question/22847288
#SPJ11
what is the correct syntax of the command to display the alias enter associated with hlq of student?
With this command, the alias "ENTER" for the high-level qualifier (HLQ) "STUDENT" will be shown. In z/OS, aliases are managed using the TSO ALIAS command, and a list of aliases is displayed with the LIST option.
What in Zos is an alias?z/OS DFSMS Access Method Services Commands. SC23-6846-01. DEFINE ALIAS. A non-VSAM data set's or user catalog's alternate name is defined via the DEFINE ALIAS command.
What kinds of items can we set a stack order for using the CSS Z index property?A higher stack order element is always in front of a lower stack order element. Remember that only positioned elements (elements with a position of absolute, relative, fixed, or sticky) and flex items (elements) can use the z-index property.
To know more about command visit:-
https://brainly.com/question/3632568
#SPJ1
which of the following are examples of output devices? (choose all that apply.) which of the following are examples of output devices? (choose all that apply.) monitor printer keyboard speakers cpu
The output device(s) among the options given in the question are Monitor, Printer, and Speakers.
An output device is a piece of hardware that receives data from a computer and converts it into a human-readable form. The data that has been processed is transmitted via an output device to a user. For instance, a printer receives data and transforms it into a hard copy that can be seen and touched. Similarly, a monitor receives data and turns it into a visual output. Speakers, on the other hand, convert digital sound data into audible sound. Here are the details of the output devices in the question.
Monitor PrinterSpeakersLearn more about device visit:
https://brainly.com/question/2612080
#SPJ11
van is the it administrator at alphina systems. he wants to be able to plug and unplug his hardware devices without using the safely remove hardware option. what should ivan do?
As an IT administrator at Alphina systems, what should Van do if he wants to be able to plug and unplug his hardware devices without using the safely remove hardware option
The use of hardware devices and peripherals has become increasingly important in the modern age. Hardware devices, such as a computer mouse, keyboard, printer, and others, have a big role to play in the overall functionality of your system. If Van, the IT administrator at Alphina Systems, wants to unplug and plug his hardware devices without using the "Safely Remove Hardware" option, he should take the following steps:Make sure that the device supports the plug-and-play feature before connecting it to the computer's USB port.Insert the device into an available USB port on the computer.When the device is connected, the system will detect it and automatically install the device's drivers.Wait for the driver installation process to complete, and the device will be ready to use.On Windows computers, it is not recommended to unplug hardware devices without using the "Safely Remove Hardware" option. However, if Van still wishes to unplug the device without using this option, he should be aware of the potential consequences, such as data corruption or other system errors.
Ivan should enable "hot swapping" or "hot plugging" for his hardware devices at Alphina Systems. This will allow him to safely plug and unplug his hardware without using the "Safely Remove Hardware" option.
Learn more about hardware devices here;
https://brainly.com/question/14837314
#SPJ11
15) according to the course presentations, what is the oldest known military cryptographic hardware device? how did it work?
The Enigma Machine is the oldest known military cryptographic hardware device, designed by the Germans at the end of World War I.
The Enigma Machine used a series of rotors that could be placed in different positions to encode messages. The Enigma Machine used a series of rotors that could be placed in different positions to encode messages, making it a relatively secure means of communication at the time.
The Germans used it during World War II to communicate with their military forces, but the Allies were able to crack the codes generated by the Enigma machine, which helped hasten the end of the war.
Learn more about cryptographic hardware:
https://brainly.com/question/28218167
#SPJ11
what is the this keyword used to reference? the this keyword references the method that was called. the this keyword references the current class. the this keyword references the object that called the method. the this keyword references the instance variable that a local variable shadows.
Answer:
The "This Key"
Explanation:
This is how we reference it because it normally helps any confusion. (I might be wrong)
The "this" keyword in object-oriented programming refers to the current object or instance of a class. It is a reference to the object that the method was called on or the object that is currently being constructed. Therefore, the final answer is that the this keyword references the object that the method was called on.
When used within an instance method or constructor of a class, the this keyword is used to refer to the current object, i.e., the object on which the method or constructor is being invoked. This can be useful, for example, when there is a need to distinguish between an instance variable and a local variable that has the same name. Therefore, the correct answer to the question is: "The this keyword references the object that the method was called on."
Learn more about Programming: brainly.com/question/23275071
#SPJ11
which options to find can you use to locate files owned by a particular user? (select all that apply.)
To find files owned by a particular user are The 'find' command, The 'ls' command, and The 'grep' command.
To find files owned by a particular user are:
1. The 'find' command, which searches for files in a directory hierarchy.
2. The 'ls' command, which lists the files in a directory.
3. The 'grep' command, which searches for a particular pattern in a file.
The 'find' command is used to locate files based on various criteria, such as filename, type, size, and ownership. To find files owned by a specific user, use the '-user' option followed by the username. For example, to find all files owned by the user "john," use the following command:
find / -user john
The 'ls' command is used to list files and directories in a directory. To list files owned by a specific user, use the '-l' option followed by the username. For example, to list all files owned by the user "john" in the current directory, use the following command:
ls -l | grep john
The 'grep' command is used to search for a pattern in a file. To search for files owned by a specific user, use the '-R' option followed by the username and the directory to search. For example, to search for all files owned by the user "john" in the '/home' directory, use the following command:
grep -R john /home/
Learn more about commands visit:
https://brainly.com/question/8508207
#SPJ11
In Windows, the only way to copy or move files is to use the Clipboard.a. Trueb. False
The given statement, "In Windows, the only way to copy or move files is to use the Clipboard" is false becasue the Clipboard is one way to copy and move files in Windows, it is not the only way.
In Windows, there are several ways to copy or move files, and using the Clipboard is only one of them. For example, you can also use the drag-and-drop method to move files from one location to another, or you can use the "cut" and "paste" commands from the context menu. Additionally, you can use the "copy" and "move" commands from the "Organize" menu in the File Explorer. So, there are multiple ways to copy or move files in Windows, and using the Clipboard is just one option.
You can learn more about Clipboard at
https://brainly.com/question/7978536
#SPJ11
which of the following components of program state are shared across threads in a multithreaded process? select two answers. group of answer choices register values heap memory global variables stack memory
In a multithreaded process, the two components of program state that are shared across threads are global variables and heap memory.
Global variables are variables that are available to all threads and can be modified by any of them. Heap memory is the area of memory that is available to all threads, and stores object that are created by all threads.
Global variables provide a way for threads to share information with each other. Since global variables are available to all threads, any of them can modify the values stored in these variables. This allows the threads to communicate with each other and synchronize their operations.
Heap memory stores object that is created by all threads. All threads have access to the objects stored in the heap, and can thus modify their values and use the objects. This allows threads to share information through the objects they create.
In conclusion, the two components of the program state that are shared across threads in a multithreaded process are global variables and heap memory. Global variables allow threads to communicate with each other and synchronize their operations, while heap memory stores object that can be used by all threads.
Learn more about global variables and heap memory:https://brainly.com/question/29851290
#SPJ11
T/F: Claire wants to use a quote by a famous author in an article she is writing about the declining population of Great White sharks. She will not be infringing the copyright of the author if she makes a citation in the article.
The statement "Claire wants to use a quote by a famous author in an article she is writing about the declining population of Great White sharks. She will not be infringing the copyright of the author if she makes a citation in the article" is true becasue by citing the author of the quote in her article, Caire is not infringing the copyright.
If Claire wants to use a quote by a famous author in her article, she can do so as long as she cites the source properly. Proper citation gives credit to the original author and acknowledges their ownership of the content, thereby avoiding copyright infringement.
However, it is important to note that the extent to which a quote can be used without infringing on copyright law depends on the context and the amount of the original work being used.
You can learn more about copyright infringement at
https://brainly.com/question/30333185
#SPJ11
can you power an external monitor with the sony fx3 or do you need a separate battery for the monitor?
Yes, you can power an external monitor with the Sony FX3. However, depending on the type of monitor you are using, you may need a separate battery for the monitor.
For an LCD monitor, you may need an AC adapter that connects the monitor to a power source, like an electrical outlet or a battery. If the monitor has an HDMI port, you can connect it directly to the Sony FX3's HDMI port and it will power the monitor.
For a CRT monitor, you need an external battery to power it. The Sony FX3 is not powerful enough to provide the current needed to power the monitor. You will need to get a separate battery with the proper voltage to power the monitor.
In summary, to power an external monitor with the Sony FX3, you may need an AC adapter, HDMI cable, or a separate battery depending on the type of monitor you are using.
You can learn more about external monitor at: brainly.com/question/24309268
#SPJ11
The relational data model was developed in the _____.a. 1960s b. 1970sc. 1980s d. 1990s
The relational data model was developed in the b. 1970s.
What is a relational data model?A relational data model is a database model that enables the storage, maintenance, and querying of data in a structured manner. Data is stored in tables consisting of rows and columns in a relational data model. Each row in a table represents a single entity, and each column represents a specific characteristic or attribute of that entity.
Relational databases are the most widely used database management systems (DBMSs) since they provide a solid foundation for data management. They use Structured Query Language (SQL) to interact with data.
Relational data models are based on mathematical set theory and predicate logic. Relational data models use primary and foreign keys to establish relationships between tables. These relationships enable data retrieval and integration across different tables. The relational data model was first introduced in a paper by Edgar Codd in 1970.
Learn more about relational data model here:
brainly.com/question/13262352
#SPJ11
The Close button reduces a window so that it only appears as a button on the taskbar.a. Trueb. False
The given statement, "The Close button reduces a window so that it only appears as a button on the taskbar" is false because the Close button is designed to close the window completely, not just minimize it to the taskbar.
Minimizing a window to the taskbar is typically done by clicking the Minimize button, which looks like a small line or dash, and is located next to the Close button in the top-right corner of the window. The Close button, on the other hand, typically looks like an "X" and is intended to close the window, remove it from the screen, and free up system resources that were being used by the program associated with the window.
You can learn more about taskbar at
https://brainly.com/question/28147966
#SPJ11
which of the following hides the existence of information? a. decryption b. steganography c. ciphering d. encryption
Among the options, the practice that hides the existence of information is steganography (option b)
Steganography is the practice of concealing a message or information within another file, such as an image, video, or audio file. The goal of steganography is to hide the presence of the message, so that an observer does not even know that there is a message hidden within the file.
Encryption, on the other hand, transforms a message into a code that is unreadable without a specific key or algorithm.
Decryption reverses this process, translating the code back into the original message.
Ciphering is another term for encryption.
Learn more about Steganography here:
https://brainly.com/question/13084167
#SPJ11