The following statements describe phase changes is particles in a liquid need to move more slowly in order to freeze.
Substances absorb energy when they melt and solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes. Phase changes involve matter changing from one state to another. A change in a substance's physical form or state is known as a phase change, when water transforms from a liquid to a solid, for example, it is undergoing a phase change. Phase changes, often known as phase transitions, involve the transfer of energy. During a phase change, energy must be added or removed from the system, and this energy is often referred to as latent heat.
In other words, a phase transition is a phenomenon that occurs when a substance alters from one physical state to another. Solid, liquid, and gas are the three physical states of matter, energy must be added to break the bonds between molecules to transform from a solid to a liquid and then from a liquid to a gas. Particles in a liquid need to move more slowly in order to freeze and substances absorb energy when they melt. Solidification occurs when the particles lose enough energy to slow down and bond together. In a state of matter, changes occur when temperature or pressure changes.Phase changes involve matter changing from one state to another.
Learn more about phase transition at:
https://brainly.com/question/3255181
#SPJ11
upon combustion, a compound containing only carbon and hydrogen produces 2.77 gco2 and 0.851 gh2o . find the empirical formula of the compound.
Answer:Gco is 0.953
Explanation:
a triprotic acid h3a has pka's of 2.50, 5.75, and 9.25. what is the pkb for the base a3-? if you need to, assume the solution is at 25 oc, where the kw is 1.00x10-14.
The given triprotic acid H₃A has pka's of 2.50, 5.75, and 9.25.
The pkb for the base A³⁻ can be calculated using the formula: pka + pkb = 14, where pka is the acid dissociation constant and pkb is the base dissociation constant.
Using this formula, we can first calculate the value of the third pkb as follows:
pka + pkb = 14 ⇒
pkb = 14 - 9.25
= 4.75
Similarly, we can calculate the second pkb:pka + pkb = 14
⇒ pkb
= 14 - 5.75
= 8.25
Now, we can calculate the first pkb:pka + pkb = 14 ⇒ pkb = 14 - 2.5 = 11.5
Therefore, the pkb values for the base A³⁻ are 11.5, 8.25, and 4.75 respectively.
To know more about base dissociation constant click on below link:
https://brainly.com/question/28197409#
#SPJ11
francine added 3.0 ml of 4.0 m koh to 6.0 ml of 0.30 m hbr. determine whether the resulting mixture is acidic, basic, or neutral.
The resulting mixture is basic because the KOH is a strong base and the HBr is a weak acid.
To determine whether the resulting mixture is acidic, basic, or neutral, the concentration of hydroxide ions (OH-) and hydronium ions (H+) in the solution is compared. Since KOH is a base and HBr is an acid, it is essential to determine the net ionic equation. Here's the balanced chemical equation:
KOH(aq) + HBr(aq) → KBr(aq) + H2O(l)
Since the balanced equation represents a neutralization reaction, the concentration of OH- and H+ can be determined based on the reaction. Therefore, in the reaction, the number of OH- ions will be equal to the number of H+ ions.In the above reaction, 1 mole of KOH reacts with 1 mole of HBr to form 1 mole of KBr and 1 mole of water. As a result, the mole of KOH added in the reaction is;
Number of moles of KOH = volume × concentration= 3.0 ml × (4.0 mol/L)/1000 mL/L= 0.012 mol
The mole of HBr reacted in the reaction is:
Number of moles of HBr = volume × concentration= 6.0 mL × (0.30 mol/L)/1000 mL/L= 0.0018 mol
Therefore, the number of moles of HBr is less than the number of moles of KOH. Since KOH is a base and HBr is an acid, the net ionic equation is as follows:
H+ + OH- → H2O
In this reaction, the number of OH- ions is greater than the number of H+ ions; therefore, the solution is basic. Therefore, the resulting mixture is basic.
More on acid/bases: https://brainly.com/question/31030349
#SPJ11
strain energy for alkanes interaction / compound kj/mol kcal/mol h : h eclipsing 4.0 1.0 h : ch3 eclipsing 5.8 1.4 ch3 : ch3 eclipsing 11.0 2.6 gauche butane 3.8 0.9 cyclopropane 115 27.5 cyclobutane 110 26.3 cyclopentane 26.0 6.2 cycloheptane 26.2 6.3 cyclooctane 40.5 9.7 (calculate your answer to the nearest 0.1 energy unit, and be sure to specify units, kj/mol or kcal/mol. the answer is case sensitive.)
The strain energy (in kJ/mol and kcal/mol) for various alkane interactions/compounds are: H:H eclipsing – 4.0 kJ/mol, 1.0 kcal/mol, H: CH3 eclipsing – 5.8 kJ/mol, 1.4 kcal/mol.
The strain energy for alkanes interaction is as follows: H : H eclipsing - 4.0 KJ/mol or 1.0 Kcal/mol: CH3 eclipsing - 5.8 KJ/mol or 1.4 Kcal/mol CH3 : CH3 eclipsing - 11.0 KJ/mol or 2.6 Kcal/mol.
Gauche butane - 3.8 KJ/mol or 0.9 Kcal/mol Cyclopropane - 115 KJ/mol or 27.5 Kcal/molCyclobutane - 110 KJ/mol or 26.3 Kcal/molCyclopentane - 26.0 KJ/mol or 6.2 Kcal/molCycloheptane - 26.2 KJ/mol or 6.3 Kcal/molCyclooctane - 40.5 KJ/mol or 9.7 Kcal/moL. The energy units are written in uppercase. The difference between kj/mol and kcal/mol is that kj/mol is the SI unit of energy, and kcal/mol is the cgs unit of energy.
Read more about energy:
https://brainly.com/question/13881533
#SPJ11
Which of the following best describes a star? A star is a celestial body -
composed of rock and metal with a very high density.
that is too big to be an asteroid, but too small to be a planet.
that rotates on an axis and revolves around the Sun composed of gases
that emit light due to nuclear reactions.
The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
Stars are massive, luminous spheres of plasma held together by their own gravity. They are not composed of rock and metal with a high density, nor are they too big to be an asteroid but too small to be a planet. Stars do rotate on an axis and revolve around a central point, but their defining characteristic is their ability to emit light and heat through the process of nuclear fusion.
What is celestial body?
A celestial body is any object that exists in space, such as a planet, moon, asteroid, comet, star, or galaxy. Celestial bodies are natural objects that are not made by humans, and they are typically studied by astronomers and other scientists who are interested in learning more about the structure, composition, and behavior of the universe. Celestial bodies can be located within our solar system or in distant regions of space, and they can range in size from tiny rocks to massive stars and superclusters of galaxies.
To know more about celestial body, visit:
https://brainly.com/question/28876984
#SPJ1
Complete question is: The best description of a star is: "a celestial body that emits light due to nuclear reactions and is composed of gases."
Atmospheric pressure on the peak of Mt. Everest can be as low as 150 mm Hg, which is why climbers
need to bring oxygen tanks for the last part of the climb. If the climbers carry 10.0 liter tanks with an
internal gas pressure of 3.04 x 10¹ mm Hg, what will be the volume of the gas when it is released from the
tanks?
Answer: The volume of gas released from the tank at the peak of Mt. Everest is 37.83 liters.
Explanation: To solve this problem, we can use the general gas law equation:
PV = nRT
where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature (in Kelvin).
We can rearrange this equation to solve for volume:
V = nRT/P
We are given the internal gas pressure of the tank (P) and the volume of the tank (10.0 L). We need to find the volume of gas released from the tank (V). We also know that the temperature and number of moles of gas are constant (assuming no leaks or temperature changes during the climb).
To find the volume of gas released at the peak of Mt. Everest (150 mm Hg), we can use the following steps:
Convert the internal gas pressure of the tank to atm:
3.04 x 10¹ mm Hg x (1 atm / 760 mm Hg) = 0.004 atm
Convert the peak pressure to atm:
150 mm Hg x (1 atm / 760 mm Hg) = 0.197 atm
Plug in the known values to the equation:
V = nRT/P
V = nRT / (0.197 atm)
Solve for V:
V = (nRT) / (0.197 atm)
We can assume that the number of moles of gas, n, and the temperature, T, are constant. R is also a constant (0.08206 L atm / mol K).
So we can simplify the equation to:
V = constant / P
V = k / 0.197
where k is a constant. We can solve for k by using the initial conditions:
10.0 L = k / 0.004
k = 0.04 L atm
Now we can use this value of k to find the volume of gas released at the peak of Mt. Everest:
V = k / 0.197
V = 0.04 L atm / 0.197
V = 0.203 L
But this is the volume of gas at standard conditions (0°C and 1 atm). We need to correct for the temperature and pressure at the peak. To do this, we can use the following equation:
(P1 V1) / (n1 T1) = (P2 V2) / (n2 T2)
where the subscripts 1 and 2 refer to the initial and final states of the gas.
We can assume that n and V are constant, so this equation simplifies to:
P1 / T1 = P2 / T2
We can solve for T2:
T2 = (P2 T1) / P1
T1 is the initial temperature of the gas (room temperature, about 20°C or 293 K). P1 is the initial pressure of the gas (0.004 atm). P2 is the final pressure of the gas (0.197 atm).
T2 = (0.197 atm x 293 K) / 0.004 atm
T2 = 14,502 K
This temperature is obviously not physically realistic, but it shows that the volume of gas is greatly affected by the low pressure and temperature at the peak of Mt. Everest. To correct for this, we can assume that the gas behaves ideally and use the ideal gas law equation:
PV = nRT
We can solve for V:
V = (P2 V1 T1) / (P1 T2)
V = (0.197 atm x 10.0 L x 293 K) / (0.004 atm x 14,502 K)
V = 37.83 L
So the volume of gas released from the tank at the peak of Mt. Everest is about 38 liters.
Hope this helps, and have a great day!
compare a rigid container such as a glass bottle with a flexible container, such as an air bag. describe how the type of container affects how the preassure of the gas inside the container can vary.
A rigid container like a glass bottle cannot change shape, so pressure changes inside it can cause it to rupture. In contrast, a flexible container like an airbag can change shape and accommodate pressure changes without rupturing.
A rigid container, such as a glass bottle, is not capable of changing its shape when the pressure of the gas inside changes. This means that as the temperature of the gas increases, its pressure will also increase, causing the walls of the container to be subjected to an increased force. If the pressure of the gas inside the container continues to rise, the container may rupture or explode.
On the other hand, a flexible container, such as an airbag, is capable of expanding and contracting as the pressure of the gas inside changes. This is because the walls of the container are made of flexible material, such as nylon or polyester. When the pressure of the gas inside the container increases, the walls of the container will expand to accommodate the extra volume. If the pressure of the gas decreases, the walls of the container will contract, reducing the volume of the container.
To know more about the pressure, visit:
https://brainly.com/question/12497098
#SPJ1
you are given a small bar of an unknown metal. you find the density of the metal to be 10.5 g/cm3. an x-ray diffraction experiment measures the edge of the unit cell as 409 pm. assuming that the metal crystallizes in a face-centered lattice, what is the metal most likely to be?
The metal is most likely to be aluminum, based on the given information. Aluminum has a density of 2.7 g/cm3 and a unit cell edge of 408.2 pm, which closely matches the given density and unit cell edge.
Crystallization is the process in which a material, usually a solid, organizes its molecules into an ordered and symmetrical arrangement.
The crystalline structure of a metal determines its physical properties, including its density and lattice constant.
In this case, the metal crystallizes in a face-centered lattice, which means that the unit cell edge is equal to four times the length of the lattice parameter.
Therefore, the edge of the unit cell, 409 pm, implies that the lattice parameter is equal to 102.25 pm.
Aluminum is the only metal that has a density and lattice parameter close to the given values. Therefore, it is the most likely metal in this situation.
to know more about aluminum refer here:
https://brainly.com/question/9496279#
#SPJ11
what type of inter-molecular force arises from instantaneous dipole moments?
a. hydrogen bonding
b. dipole-dipole bond c. ion-dipole interactions d. ion-induce dipoles e. London Dispersion Forces
The type of intermolecular force that arises from instantaneous dipole moments is e. London Dispersion Forces. These forces occur due to temporary fluctuations in electron distribution, which create temporary dipoles that attract other nearby molecules.
London dispersion forces, also known as van der Waals forces, are the weakest type of intermolecular force. They arise from the fluctuations in the electron density in atoms and molecules.
When electrons are moving, they create temporary dipoles or instantaneous dipoles. These temporary dipoles attract each other and create an attractive force between the molecules, which is the London Dispersion Force. The strength of this force increases with the number of electrons in the molecule.
For more question on intermolecular force click on
https://brainly.com/question/13588164
#SPJ11
which type of chemical formula tells how many atoms of each element are in a molecule but does not indicate their arrangement?
Answer: The type of chemical formula that tells how many atoms of each element are in a molecule but does not indicate their arrangement is a molecular formula.
What is a molecular formula?
A molecular formula is a chemical formula that displays the exact number of atoms of each element in one molecule of a compound, but it does not reveal how the atoms are arranged in a molecule.
A molecular formula is a symbolic representation of a molecule’s elements and the number of atoms of each element present in one molecule of that substance.
A molecular formula provides information about the kinds of atoms present in a molecule and the number of each kind of atom present, but it does not provide information about the structure of the molecule.
In other words, a molecular formula only tells us the number of atoms of each element present in a molecule and not their arrangement.
What is a chemical formula?
A chemical formula is a method of expressing the structure of a molecule in a short, concise form. Chemical formulas depict the number of atoms of each element in a molecule using chemical symbols, numerals, and other chemical shorthand. Chemical formulas can be used to represent both ionic and covalent compounds.
Learn more about molecular formula here:
https://brainly.com/question/28647690#
#SPJ11
what is the name of a molecule that differs in the number of electrons, but has the same number of protons?
A molecule with the same number of protons but different number of electrons is known as an isotope.
Isotopes are atoms of the same element with different numbers of neutrons, and thus different atomic mass.
Isotopes form when an atom gains or loses an electron, resulting in an atom with the same number of protons but a different number of electrons.
Atoms of the same element with different numbers of neutrons are known as isotopes. When an atom gains or loses an electron, the number of protons stays the same but the number of electrons changes.
This change in the number of electrons alters the properties of the atom, and the different forms of the same element are known as isotopes.
The number of electrons in an atom determines how an atom interacts with other atoms.
Atoms with an even number of electrons tend to interact with each other in a more stable manner than atoms with an odd number of electrons.
This is why isotopes of elements that can exist in different forms have different chemical properties.
The isotopes of an element have different weights, and this is the result of the different numbers of neutrons. Isotopes can also have different nuclear properties and different radioactive properties.
In summary, an isotope is a molecule that differs in the number of electrons, but has the same number of protons.
This change in the number of electrons alters the properties of the atom, such as its chemical and nuclear properties.
to know more about isotope refer here:
https://brainly.com/question/11680817#
#SPJ11
what is the product of the reaction sequence below 2 methyl 1 hexanol 2 methyl 2 hexanol 1 heptanol 2 heptanol
The product of the reaction sequence below is
2-methyl-1-hexanol
and 2-methyl-2-hexanol.
The reaction sequence starts with 2-methyl-1-hexanol and 2-methyl-2-hexanol. These molecules react to form a
carbocation
intermediate, which is then attacked by a molecule of water. This forms a tertiary alcohol,
1-heptanol
. Finally, 1-heptanol undergoes dehydration to form a double bond, forming 2-heptanol.
The overall reaction is an example of a
hydration
reaction, in which a molecule of water is added to the substrate in order to produce an alcohol. This reaction is catalyzed by an acid, such as sulfuric acid. The acid helps to activate the carbocation intermediate, allowing it to be attacked by the nucleophilic water molecule.
The reaction is an example of a Markovnikov addition, in which the hydrogen atom of the water molecule is added to the carbon with the most hydrogens already attached. In this reaction, the hydrogen is added to the primary carbon of the alkene, and the double bond shifts to the secondary carbon. This forms the tertiary alcohol, 1-heptanol.
Finally, 1-heptanol undergoes dehydration to form a double bond, forming 2-heptanol. This is an example of an E1 elimination reaction, in which the alcohol is protonated and then the proton is abstracted by a base, forming the alkene.
In conclusion, the product of the reaction sequence is 2-methyl-1-hexanol and 2-methyl-2-hexanol.
To know more about
hydration
reaction
click on below link:
https://brainly.com/question/12951675
#SPJ11
a rigid cylinder contains a sample of gas at stp. what is the pressure of this gas after the sample is heated to 410 k?
Answer:
contains a sample of gas at stp. what is the pressure of this gas after the sample is heated to 410 k?
The final pressure of the sample of gas is 1.5 atm.
What is Gay-Lussac's law ?Gay-Lussac's law states that, the pressure of a gas, when its mass and volume are constant is directly proportional to its absolute temperature.
Here,
Initial pressure of the sample at STP, P₁ = 1 atm
Initial temperature of the sample at STP, T₁ = 273 K
Final temperature of the sample, T₂ = 410 K
According to Gay-Lussac's law,
P α T
So, P₁/T₁ = P₂/T₂
Therefore, the final pressure of the sample,
P₂ = (p₁/T₁) T₂
P₂ = (1/273) x 410
P₂ = 1.5 atm
Hence,
The final pressure of the sample of gas is 1.5 atm.
To learn more about Gay-Lussac's law, click:
https://brainly.com/question/2683502
#SPJ2
Valdez notices that a wooden door in his house is difficult to open in the summer, but not in the winter. Valdez explains to Tony that the temperature of the door changes throughout the year. Tony says there is no way to measure the temperature of a solid because solids do not have a lot of thermal expansion. Valdez disagrees. Develop an argument supporting or opposing Tony's claim. Support your argument with at least two pieces of evidence.
I would argue against Tony's claim that the temperature of a solid cannot be measured, just because solids do not have a lot of thermal expansion.
What is thermal expansion?Thermal expansion is the tendency of materials to change in size, shape, or volume in response to changes in temperature.
There are several ways to measure the temperature of solids. One common method is to use a thermometer, which can be inserted into the solid to measure its temperature. Another method is to use an infrared thermometer, which measures the temperature of a solid by detecting the amount of infrared radiation it emits.
Second, while it is true that solids have a lower coefficient of thermal expansion than liquids or gases, they still expand and contract with changes in temperature. This is evident in Valdez's example of the wooden door, which becomes difficult to open in the summer when the temperature is higher, and easier to open in the winter when the temperature is lower. This change in the size of the door is due to thermal expansion and contraction of the wood.
To find out more about thermal expansion, visit:
https://brainly.com/question/30242448
#SPJ1
find the percent by volume concentration for 50.00 ml of a 50% nacl solution added to more solvent to make 120.00ml of solutions
To find the percent by volume concentration for 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution, we need to use the following equation:
Volume (V) = Concentration (C) x Amount (A)
We know the amount (A) of NaCl is 50.00 ml, and we know the concentration (C) is 50%. Therefore, we can rearrange the equation to solve for V:
V = 50% x 50.00 ml
V = 25.00 ml
We also know that the total volume of the solution is 120.00 ml, so we can subtract 25.00 ml from 120.00 ml to get the volume of the solvent.
120.00 ml - 25.00 ml = 95.00 ml of solvent
To calculate the percent by volume concentration, we need to divide the volume of NaCl (25.00 ml) by the total volume (120.00 ml) and multiply by 100%.
25.00 ml/120.00 ml x 100% = 20.83%
Therefore, the percent by volume concentration of 50.00 ml of a 50% NaCl solution added to more solvent to make 120.00ml of solution is 20.83%.
Learn more about percent by volume concentration at: https://brainly.com/question/12427481
#SPJ11
once you have extracted caffeine, how will you confirm that it is caffeine? how will you test the purity of your caffeine? select three techniques to characterize your substance and describe what information each technique can provide you.
To recognize and test the purity of caffine , the tests which could be performed are melting point determination, UV-visible spectroscopy, and high-performance liquid chromatography (HPLC).
In order to identify that the given substance is caffeine, you can use several analytical techniques. Here are three techniques to characterize caffeine and their applications:
Melting Point Determination:
It is a physical method which is used in order to determine the purity of a substance. The melting point of caffeine is in the range of 235-238 °C. Hence, by measuring the melting point of the extracted caffeine and comparing it with the expected value of pure caffine, you can confirm that the substance you have extracted is caffeine.
UV-Visible Spectroscopy:
UV-Visible spectroscopy can be used to identify caffeine by analyzing the absorption of UV light by the molecule. Caffeine has a characteristic absorption peak at 273 nm. By measuring the UV spectrum of the extracted caffeine and comparing it to the literature value, you can confirm the presence of caffeine.
High-Performance Liquid Chromatography (HPLC):
It is a widely used technique for the separation, identification, and quantification of substances. By using this technique, you can separate and quantify the different components of the extracted caffeine, including its impurities. By comparing the range of melting point of the caffeine to the peak areas of known standards, you can calculate the purity of your extracted caffeine.
Therefore it can be said that the melting point determination, UV-Visible spectroscopy, and High-Performance Liquid Chromatography are three analytical techniques that can be used to confirm the identity and purity of extracted caffeine.
Learn more about caffine :
https://brainly.com/question/24482629
#SPJ4
select the correct name for the compound. a five membered ring with an oxygen and four carbons. the ring has two double bonds, and the ring oxygen has two lone pairs. the name is pyrrole
The correct name for the compound is pyrrole.
Pyrrole is a five-membered aromatic heterocyclic compound consisting of one nitrogen atom and four carbon atoms. It is a heterocyclic aromatic organic compound having the chemical formula C4H4NH
Explanation :
What is pyrrole?
Pyrroles are heterocyclic aromatic compounds with a five-membered ring containing four carbon atoms and one nitrogen atom. Pyrrole and its derivatives, which include a nitrogen atom in the five-membered ring, are widely used in organic synthesis.
Pyrrole is a nitrogen-containing organic compound that occurs naturally.
The five-membered ring of pyrrole includes four carbon atoms and one nitrogen atom. It is a strong and stable organic compound that is critical in the synthesis of many organic molecules.
Pyrrole is a fundamental structure in many organic molecules, as well as a fundamental molecule in porphyrins, which are essential compounds in living cells. Pyrrole is often used in organic synthesis as a starting material, and it has a variety of other applications in different fields.
Pyrrole-containing molecules, such as the neurotransmitter serotonin and the heme group of hemoglobin, are important in biological systems.
To know more about the pyrrole https://brainly.com/question/13196842
#SPJ11
Net ionic equation of evolved gas through lime water
Answer: 15.0667
Explanation:
in an equilibrium mixture at 500k, the partial pressure of pcl 5 is 0.860 atm, pcl 3 is 0.350 atm, and cl 2 is 1.22 atm. calculate the equilibrium constant (k p ) for this reaction.
0.493 is the equilibrium constant (k p ) for [tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g) reaction at 500k.
The reaction is given as
[tex]PCl_5[/tex] (g) ⇌ [tex]PCl_3[/tex] (g) + [tex]Cl_2[/tex] (g)
At 500 K, the partial pressure of [tex]PCl_5[/tex] is 0.860 atm, [tex]PCl_3[/tex] is 0.350 atm, and [tex]Cl_2[/tex] is 1.22 atm.
To calculate the equilibrium constant ([tex]K_P[/tex]) for this reaction, we need to use the equation
[tex]K_P[/tex] = [[tex]PCl_3[/tex]] [[tex]Cl_2[/tex]] / [[tex]PCl_5[/tex]]
Here, [[tex]PCl_5[/tex]] = 0.860 atm
[[tex]PCl_3[/tex]] = 0.350 atm
[[tex]Cl_2[/tex]] = 1.22 atm
Substituting these values, we get
[tex]K_P[/tex] = (0.350)(1.22) / 0.860
[tex]K_P[/tex] = 0.493
Therefore, the equilibrium constant ([tex]K_P[/tex]) for this reaction at 500 K is 0.493.
Learn more about equilibrium constant: https://brainly.com/question/19340344
#SPJ11
what physical process is primarily responsible for the purification achieved during recrystallization?
The physical process that is primarily responsible for the purification achieved during recrystallization is the process of selective solubility.
The process of selective solubility refers to the ability of a substance to selectively dissolve in a particular solvent or a combination of solvents. The substance that is more soluble in a solvent will dissolve in that solvent while the impurities that are less soluble will remain undissolved.
The process of recrystallization is used to purify a solid that contains impurities. In this process, a solid is dissolved in a solvent that is heated to the boiling point. Once the solution is saturated, it is cooled slowly, and crystals are allowed to form. During recrystallization, the impurities are excluded from the growing crystals because of their lower solubility in the solvent, and the crystals that form are pure.
Therefore, the process of selective solubility is primarily responsible for the purification achieved during recrystallization.
Learn more about selective solubility here: https://brainly.com/question/13198024.
#SPJ11
A face-centered cubic unit cell is the repeating unit in which type of crystal packing:__________
A face-centered cubic unit cell is the repeating unit in which type of crystal packing: cubic closest-packed, option B.
Solids can be thought of as having a structure similar to that of a piece of wallpaper in three dimensions. Wallpaper has a recurring pattern that is consistent and runs from edge to edge. Similar repeating patterns may be found in crystals, however in this case, the patterns span three dimensions from one edge of the solid to the other.
By describing the dimensions, form, and content of the most basic repeating unit in the pattern, we may accurately describe a piece of wallpaper. The smallest repeating unit's dimensions, composition, and arrangement on top of one another to form the crystal may be used to characterise a three-dimensional crystal.
Learn more about Unit cell;
https://brainly.com/question/12977980
#SPJ4
Complete question:
A face-centered cubic unit cell is the repeating unit in which type of crystal packing A) hexagonal close-packing B)cubic close-packed C)body centered D)simple E)all of the above
calculate the volume of 0.200m naoh (in ml) needed to completely react with 50.00 ml of 0.0500m ch3cooh.
The volume 0.200 M NaOH (in mL) needed to completely react with 50.00 mL of 0.0500 M CH₃COOH is 12.5 mL
How do i determine the volume of NaOH needed?The volume of NaOH needed can be obtained as shown below:
The balanced equation is given as follow:
CH₃COOH + NaOH -> CH₃COONa + H₂O
The mole ratio of the acid, CH₃COOH (nA) = 1The mole ratio of the base, NaOH (nB) = 1Concentration of base, NaOH (Cb) = 0.200 MVolume of acid, CH₃COOH (Va) = 50.00 mL Concentration of acid, CH₃COOH (Ca) = 0.0500 MVolume of base, NaOH (Vb) =?CaVa / CbVb = nA / nB
(0.05 × 50) / (0.2 × Vb) = 1
2.5 / (0.2 × Vb) = 1
Cross multiply
1 × 0.2 × Vb = 2.5
0.2 × Vb = 2.5
Divide both side by 0.2
Vb = 2.5 / 0.2
Vb = 12.5 mL
Thus, the volume of NaOH needed is 12.5 mL
Learn more about volume:
https://brainly.com/question/19053582
#SPJ1
which separation technique would be the best method to separate a 1:1 mixture of aniline and ethylbenzene?
The best method to separate a 1:1 mixture of aniline and ethylbenzene is through
distillation
.
Distillation is a process that involves heating the mixture to its boiling point, which causes the components to vaporize. As the vapors cool and condense, the liquid components will separate into their pure forms.
Since the boiling points of aniline and
ethylbenzene
differ significantly Aniline boiling point: 184°C; Ethylbenzene boiling point: 135°C.
The process of distillation involves heating the mixture in a distillation apparatus.
As the temperature increases, the vaporized components of the mixture will travel up a condenser and then be collected separately in two separate flasks.
During this process,
aniline
will be the first component to vaporize and travel up the condenser, while ethylbenzene will follow suit.
The two components will condense in their respective flasks and can then be collected and isolated.
In conclusion,
Distillation is the best method to separate a 1:1 mixture of aniline and ethylbenzene due to the fact that it utilizes their differences in boiling points to allow for the collection of the two components in their pure forms.
This is achieved by heating the mixture in a distillation apparatus and condensing the vapors in two separate flasks.
to know more about
distillation
refer here:
https://brainly.com/question/29037176#
#SPJ11
76.33 grams of NaCl were collected after experiment. How many moles were
produced?
76.33 grams of NaCl were collected after experiment 1.306 mol were
produced.
What is mole formula?Every material has a molecular weight of 6.023 x 10²³. It may be used to quantify the chemical reaction's byproducts. The symbol mol is used to identify the unit. The molecular formula is written out as follows.
Mass of material / mass of one mole equals the number of moles.
We need to know the molar mass of NaCl in order to compute the number of moles of NaCl created.
The atomic weights of sodium (Na) and chlorine together make up the molar mass of sodium chloride (Cl). Na has an atomic mass of 22.99 g/mol, while Cl has an atomic mass of 35.45 g/mol. As a result, NaCl's molar mass is:
Molar mass of NaCl
= (1 x atomic mass of Na) + (1 x atomic mass of Cl)
= (1 × 35.45 g/mol plus 1 x 22.99 g/mol)
= 58.44 g/mol
The mass of gathered NaCl may now be converted into moles using the molar mass:
Mass of NaCl divided by its molar mass yields moles of NaCl.
moles of NaCl = 76.33 g / 58.44 g/mol
moles of NaCl = 1.306 mol
As a result, the experiment generated 1.306 moles of NaCl.
To know more about Moles visit:
https://brainly.com/question/21323029
#SPJ1
PLEASE HELP THIS IS URGENT
Answer:
in the first box the answer will be=37.2
and in the second box= 22.4
if 20.6 grams of an aqueous solution of sodium carbonate, na2co3, contains 3.11 grams of sodium carbonate, what is the percentage by mass of sodium carbonate in the solution?
Answer: The percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is 15.10%.
The percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is calculated by dividing the mass of sodium carbonate (3.11 g) by the total mass of the solution (20.6 g).
This gives us a ratio of 0.1510, which can be converted to a percentage by multiplying by 100. This results in a percentage by mass of sodium carbonate of 15.10%.
The percentage by mass of sodium carbonate can also be calculated using the following equation:
Percentage by mass of sodium carbonate = (Mass of sodium carbonate / Total mass of solution) * 100
In this case, we can substitute the known values of the mass of sodium carbonate (3.11 g) and the total mass of the solution (20.6 g) into the equation to calculate the percentage by mass of sodium carbonate in the solution.
We first divide the mass of sodium carbonate (3.11 g) by the total mass of the solution (20.6 g). This gives us a ratio of 0.1510.
We then multiply this ratio by 100 to convert it into a percentage. This gives us a percentage by mass of sodium carbonate of 15.10%.
In conclusion, the percentage by mass of sodium carbonate (Na2CO3) in an aqueous solution of sodium carbonate is 15.10%.
Learn more about percentage of chemicals here:
https://brainly.com/question/14962135#
#SPJ11
quizler which toxic substance is responsible for the symptoms of flushing syndrome? group of answer choices alcohol dehydrogenase acetaldehyde acetaldehyde dehydrogenase acetate
The toxic substance that is responsible for the symptoms of the flushing syndrome is acetaldehyde.
Flushing syndrome is also known as alcohol flush reaction (AFR). It is a condition that occurs after alcohol consumption. It is a genetic predisposition that results in the body's inability to metabolize and break down acetaldehyde efficiently.
Acetaldehyde is produced when alcohol is metabolized by the liver. Flushing syndrome symptoms include facial flushing, rapid heartbeat, nausea, vomiting, abdominal pain, headache, dizziness, light-headedness, sweating and redness of the skin.
Acetaldehyde is a toxic substance that is responsible for the symptoms of the flushing syndrome. The toxic substance is produced when alcohol is broken down by alcohol dehydrogenase in the liver.
Acetaldehyde is then broken down into acetate by the enzyme acetaldehyde dehydrogenase. However, if acetaldehyde is not metabolized efficiently, it can cause the flushing syndrome.
Thus, the flushing syndrome occurs when there is an accumulation of acetaldehyde in the bloodstream.
Learn more about acetaldehyde: https://brainly.com/question/28945966
#SPJ11
how would your calculations of the concentration of [fescn]2 been affected if the cuvette you used had a 1.5 cm path length rather than the 1.0 cm value you were told to use?
The increased distance across the cell will result in an increase absorbance reading.
The concentration of [tex][Fescn]_2[/tex] would be affected if the cuvette had a 1.5 cm path length rather than the 1.0 cm value used.Since the absorbance of a sample is proportional to the concentration of a sample (as described by the Beer-Lambert law), increasing the path length of the cuvette would result in a decrease in absorbance. This means that the concentration of the sample would be lower than if the 1 cm path length was used. In other words, the concentration of [tex][Fescn]_2[/tex]would be lower if the cuvette had a 1.5 cm path length than if it had a 1.0 cm path length.
learn more about cuvette Refer:brainly.com/question/29385690
#SPJ1
under standard conditions (298 k and 1 atm), which statement is true? refer to the constants for thermodynamic properties under standard conditions. a. diamond converts to graphite spontaneously b. graphite converts to diamond spontaneously c. none of the above
Under standard conditions (298 K and 1 atm), neither statement is true.
Diamond and graphite are both forms of carbon and are in a state of equilibrium under standard conditions. This means that neither diamond nor graphite will spontaneously convert to the other form.
Therefore, the correct answer is option (c): none of the above.
For more questions like thermodynamic visit the link below:
The thermodynamic equilibrium constant In a chemical equilibrium, K is the appropriate quotient of species activities. Under normal temperatures and pressures, an activity cannot be very many orders of magnitude more than 1.
The definition of thermodynamic properties is "system characteristics that can specify the state of the system." Certain constants, like R, are not attributes since they do not describe the state of a system.
Thermodynamics states that the conversion of diamond to graphite occurs spontaneously and is favourable. Yet, this reaction moves extremely slowly because kinetics, not thermodynamics, regulates it. As a result, diamond is thermodynamically unstable but kinetically stable.
https://brainly.com/question/29508731
#SPJ11
the reaction rate is measured as -2.6 m ch4/s. determine the rate of appearance of co2 and the rate of appearance of h2o. explain how you arrived at your answers.
The stoichiometric coefficients can be used to connect the rates at which certain components appear or vanish in the reactions that are described. Applying this to the responses given,
1. Reaction: N₂(g) + 3H₂(g) → 2NH₃(g)
Given reaction rate: 0.032 M NH₃/s
According to the stoichiometry:
For every 1 mole of N₂, 2 moles of NH₃ are produced.For every 3 moles of H₂, 2 moles of NH₃ are produced.Therefore, the rate of disappearance of N₂ is given by:
Rate of disappearance of N₂ = (0.032 M NH₃/s) * (1 mol N₂ / 2 mol NH₃)
= 0.016 M N₂/s.
Similarly, the rate of disappearance of H₂ is given by:
Rate of disappearance of H₂ = (0.032 M NH₃/s) * (3 mol H₂ / 2 mol NH₃)
= 0.048 M H₂/s.
2. Reaction: CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)
Given reaction rate: 2.6 M CH₄/s
According to the stoichiometry:
For every 1 mole of CH₄, 1 mole of CO₂ is produced.For every 1 mole of CH₄, 2 moles of H₂O are produced.
Therefore, the rate of appearance of CO₂ is given by:
Rate of appearance of CO₂ = (2.6 M CH₄/s) * (1 mol CO₂ / 1 mol CH₄) = 2.6 M CO₂/s.
Similarly, the rate of appearance of H₂O is given by:
Rate of appearance of H₂O = (2.6 M CH₄/s) * (2 mol H₂O / 1 mol CH₄)
= 5.2 M H₂O/s.
Thus, we used the stoichiometric coefficients to relate the rates of different components in the reactions.
For more details regarding stoichiometric coefficients, visit:
https://brainly.com/question/32088573
#SPJ12
Your question seems incomplete, the probable complete question is:
In the lab activity, the reaction rate was determined by the appearance of a product. However, the reaction rate can also be determined by the disappearance of a reactant. --aructi or Rate-a[Reactant] In each situation below, you are given a rate measured by the appearance of one component of the reaction and are asked to predict the rate of appearance or disappearance of another component, based on logic and stoichiometric relationships. For example, if the reaction is as follows: A +2B Products For every mole of A that is used, 2 moles of B are used so the rate of disappearance of B is twice the rate of the disappearance of A. This may be expressed as: Rate =-=-N2(g) + 3H2 (g) ? 2NH3(g) The reaction rate is measured as 0.032 M NHy/s. Determine the rate of disappearance of N2 and the rate of disappearance H2. Explain how you arrived at your answers. CH4(g)+202(g) -CO2(g)+2H,0(8) The reaction rate is measured as 2.6 M CH/s. Determine the rate of appearance of CO2 and the rate of appearance of H20. Explain how you arrived at your answers