which substance would not work as a grignard reagent? select one: phenylmagnesium chloride isopropylmagnesium chloride ethylmagnesium bromide methylcalcium bromide

Answers

Answer 1

phenylmagnesium chloride isopropylmagnesium chloride ethylmagnesium bromide methylcalcium bromide. It is not a Grignard reagent.

A Grignard reagent is made up of an organomagnesium halide that has a general formula of RMgX, where R is an organic group, and X is a halogen (most often chlorine, bromine, or iodine). A Grignard reagent can be used to make carbon-carbon bonds with various alkyl, vinyl, and aryl halides, ketones, and aldehydes.

Methylcalcium bromide is the substance that would not work as a Grignard reagent. A Grignard reagent, as previously stated, is an organomagnesium halide. When calcium is added to the solution, it precipitates. When the solution is diluted or extracted, calcium is commonly seen as a white, fluffy solid. Calcium has a lower electronegativity than magnesium, which means it will not create a Grignard reagent as magnesium does.

As a result, methylcalcium bromide is not a Grignard reagent. Phenylmagnesium chloride, isopropylmagnesium chloride, and ethylmagnesium bromide are examples of Grignard reagents. Grignard reagents are mostly used in organic synthesis, especially in the formation of carbon-carbon bonds.
Therefore phenylmagnesium chloride isopropylmagnesium chloride ethylmagnesium bromide methylcalcium bromide is not a Grignard reagent.

For more questions on: ethylmagnesium

https://brainly.com/question/30592557

#SPJ11  


Related Questions

Calculate the volume of oxygen produced at 298K and 100 kPa by the decomposition of 30 cm3 of 0.1 mol dm_3 H2O2.

Answers

The balanced chemical equation for the decomposition of hydrogen peroxide is:

2 H2O2 (aq) → 2 H2O (l) + O2 (g)

From this equation, we can see that for every 2 moles of hydrogen peroxide that decompose, 1 mole of oxygen is produced.

We can start by calculating the number of moles of H2O2 that are present in 30 cm3 of 0.1 mol dm-3 H2O2:

30 cm3 = 30/1000 dm3 = 0.03 dm3
number of moles of H2O2 = concentration × volume = 0.1 mol dm-3 × 0.03 dm3 = 0.003 moles

Since 2 moles of H2O2 decompose to produce 1 mole of O2, we can calculate the number of moles of O2 produced:

number of moles of O2 produced = 0.003 moles H2O2 × (1 mole O2 / 2 moles H2O2) = 0.0015 moles O2

Now we can use the ideal gas law to calculate the volume of O2 produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L atm mol-1 K-1), and T is the temperature in Kelvin.

We can rearrange this equation to solve for V:

V = nRT / P

Plugging in the values, we get:

V = (0.0015 mol)(0.0821 L atm mol-1 K-1)(298 K) / (100 kPa)(101.325 kPa atm-1)
V = 0.0377 L

Therefore, the volume of oxygen produced at 298K and 100 kPa by the decomposition of 30 cm3 of 0.1 mol dm-3 H2O2 is 0.0377 L.

we learned that k is adsorbed to negatively charged soil colloids by electrostatic attraction to three types of exchange sites or binding positions. which binding position is readily available to the soil solution?

Answers

We learned that k is adsorbed to negatively charged soil colloids by electrostatic attraction to three types of exchange sites or binding positions. The cation exchange sites are the most readily available to the soil solution.

The binding position that is readily available to the soil solution is the cation exchange sites. This is because the negatively charged soil colloids attract positively charged ions, known as cations, through electrostatic attraction. These cations are then exchanged with other cations in the soil solution, leading to the term "cation exchange sites."

The other two types of exchange sites are the anion exchange sites, which attract negatively charged ions, known as anions, and the inner sphere binding sites, which involve a direct bond between the metal ion and the soil colloid surface. However, the cation exchange sites are the most readily available to the soil solution.

For more such questions on electrostatic attraction

https://brainly.com/question/16871517

#SPJ11

if 1g of magnesium and 1g of oxygen reacted, what will be left in the reaction vessel?

a)MgO only
b)MgO and Mg only
c)MgO and O2 only
d) MgO, Mg and O2

Answers

The answer is (a) MgO only, as all of the magnesium and oxygen react completely to form magnesium oxide, and there would be no unreacted magnesium or oxygen left in the reaction vessel.

What is Limiting Reagent?

The limiting reagent can be determined by comparing the mole ratios of the reactants and the coefficients in the balanced chemical equation for the reaction. The reactant that produces the least amount of product based on the stoichiometry of the balanced equation is the limiting reagent.

If 1g of magnesium (Mg) and 1g of oxygen (O2) reacted, they would combine to form magnesium oxide (MgO) according to the following chemical equation:

2Mg + O2 -> 2MgO

The molar mass of magnesium is 24.31 g/mol, while the molar mass of oxygen is 32.00 g/mol. Therefore, 1g of magnesium is equivalent to 0.041 mol, and 1g of oxygen is equivalent to 0.03125 mol.

According to the balanced equation, 2 moles of magnesium react with 1 mole of oxygen to form 2 moles of magnesium oxide. Thus, the limiting reactant in this reaction is oxygen because only 0.03125 mol of oxygen is available, whereas 0.082 mol of magnesium is available.

Using the limiting reactant, we can calculate the theoretical yield of magnesium oxide:

0.03125 mol O2 x (2 mol MgO / 1 mol O2) x (40.31 g MgO / 1 mol MgO) = 2.5 g MgO

Learn more about Limiting Reagent from the given link

https://brainly.com/question/26905271

#SPJ1

how does the strength of the attraction between water molecules and sodium and chloride ions compare

Answers

The strength of the attraction between water molecules and sodium and chloride ions is stronger compared to the attraction between water molecules themselves. This is due to the ion-dipole interaction between charged ions and polar water molecules.

The strength of the attraction between water molecules and sodium and chloride ions is generally stronger than the attraction between water molecules themselves. This is due to the following reasons:
1. Water molecules are polar, which means they have a partially positive charge on the hydrogen atoms and a partially negative charge on the oxygen atom.
2. Sodium and chloride ions are charged particles, with sodium ions having a positive charge and chloride ions having a negative charge.
3. When water molecules come into contact with sodium and chloride ions, the positive charge on the sodium ions attracts the negatively charged oxygen atoms in water molecules, and the negative charge on the chloride ions attracts the positively charged hydrogen atoms in water molecules.
4. This attraction between charged ions and polar water molecules is called ion-dipole interaction, which is stronger than the hydrogen bonding between water molecules.

To know more about ion-dipole interaction

brainly.com/question/28906670

#SPJ11

Which term is used to describe why we can smell air freshener across the room shortly after it has been sprayed? A. elastic collisions B. osmosis C. diffusion D. temperature​

Answers

The diffusion term is used to describe why we can smell air freshener across the room shortly after it has been sprayed, hence option C is correct.

When you spray the air freshener, the matter goes from a high concentration region to a low concentration area that is far away from the spraying location. Diffusion is the term used to describe this material movement.

Diffusion is the overall net movement of something from a higher concentration to a lower concentration.

The term "diffusion" is used to explain why we can smell air freshener across the room quickly after it has been applied.

Learn more about diffusion, here:

brainly.com/question/30827755

#SPJ1

what is the relationship between location of an element in the periodic table and the cation it forms?

Answers

The position of the element in the periodic table influences the cation that it forms.

An ion is a particle that has either a positive or negative charge. Ions are formed by removing or adding electrons from/to an atom or molecule. They could be classified into two categories: cations and anions. Cations are positively charged ions that are formed when an atom loses one or more electrons.

Anions are negatively charged ions that are formed when an atom gains one or more electrons.The position of the element in the periodic table influences the cation that it forms. Because the number of valence electrons changes as we move through the periodic table from left to right or top to bottom, this is the case.

As a result, the chemical properties of the elements change as we move from left to right or top to bottom. This influences the type of cations that are formed because cations are formed by losing electrons. The most prevalent cations are those that result from the loss of one, two, or three electrons by an element. Cations such as H+, Na+, K+, and Ca2+ are formed by metals.

To know more about periodic table refer to-

brainly.com/question/11155928#

#SPJ11

what is the sodium ion concentration in a solution prepared by mixing 0.345 mol na2so4 in enough water to make 2.90 l of solution?

Answers

The sodium ion concentration in the solution is 0.238 M, calculated by dividing the total moles of Na+ (0.690 mol) by the solution volume (2.90 L).

To work out the sodium particle fixation in an answer ready by blending 0.345 mol Na2SO4 in enough water to make 2.90 L of arrangement, we can involve stoichiometry and the equation for molarity.

In the first place, we really want to decide the all out number of moles of sodium particles in the arrangement. Every mole of Na2SO4 separates into 2 moles of sodium particles, so we can work out the quantity of moles of sodium particles as follows:

0.345 mol Na2SO4 x (2 mol Na+/1 mol Na2SO4) = 0.690 mol Na+

Then, we can work out the grouping of sodium particles in the arrangement by isolating the quantity of moles of sodium particles by the volume of the arrangement in liters:

0.690 mol Na+/2.90 L = 0.238 M Na+

Accordingly, the sodium particle fixation in the arrangement is 0.238 M. This intends that for each liter of arrangement, there are 0.238 moles of sodium particles present. This estimation can be valuable in different synthetic applications, including deciding the ionic strength of an answer, working out response rates, and planning compound responses.

To learn more about ion concentration, refer:

https://brainly.com/question/14334324

#SPJ4

How many atoms of nitrogen are in 1.20 grams of aspartame?

Answers

There are approximately 4.92 x 10^21 nitrogen atoms in 1.20 grams of aspartame.

What ingredients are in aspartame?

The two naturally occurring amino acids phenylalanine and aspartic acid, which are also parts of proteins in our bodies and food, are what makeup aspartame. Aspartame's sweet flavor comes from a small modification of the phenylalanine by the addition of a methyl group.

The molecular formula of aspartame is C14H18N2O5.

The molar mass of aspartame,

(14 x 12.01 g/mol) + (18 x 1.01 g/mol) + (2 x 14.01 g/mol) + (5 x 16.00 g/mol) = 294.30 g/mol

Aspartame's molecular weight in 1.20 grams can be computed as follows:

1.20 g / 294.30 g/mol = 0.00408 mol

Every aspartame molecule has two nitrogen atoms.

0.00408 mol x 2 = 0.00816 moles of nitrogen

So, we will use Avogadro's number in order to transform nitrogen moles to nitrogen atoms:

0.00816 mol x 6.022 x 10^23 atoms/mol = 4.92 x 10^21 atoms of nitrogen

To know more about the aspartame visit:

https://brainly.com/question/31299610

#SPJ9

Why is tapping on a water pipe a quicker way of passing on a message than yelling?

Answers

Tapping, also known as hot tapping or
pressure tapping, allows a utility to tie into a pressurized system by drilling or cutting safely into an existing pipe. It involves placing a tapping fitting onto a water main, in addition to a gate or ball valve that will control water flow.

consider a cell that is composed of tin metal in contact with a solution of tin (ii) sulfate, snso4, and zinc metal in a solution of zinc nitrate, zn(no3)2. answer the following questions, the reduction half reactions are provided. a) which is the reduction reaction? b) which is the oxidation reaction? c) write the overall reaction d) calculate the voltage for this cell. e) label the following on the diagram o zinc electrode o tin electrode o zinc solution o tin (ii) solution o anode o cathode o salt bridge (nano3) o voltage o draw an arrow to show the direction that the electrons travel o write the ions present in the salt bridge o use arrows to indicate the direction that the ions in the salt bridge will travel f) what will happen to the mass of each electrode as the reaction proceeds?

Answers

a) The reduction reaction is the reaction that occurs at the zinc electrode, which is Zn²⁺(aq) + 2e⁻ → Zn(s).

b) The oxidation reaction is the reaction that occurs at the tin electrode, which is Sn(s) → Sn²⁺(aq) + 2e⁻.

c) The overall reaction is: Sn(s) + Zn²⁺(aq) → Sn²⁺(aq) + Zn(s).

d) The overall voltage for the cell is the difference between these two potentials is -0.62 V.

e) Zn electrode | Zn(NO₃)₂ || SnSO₄ | Sn electrode

f) As the reaction proceeds, the mass of the tin electrode will decrease as tin atoms are oxidized to form Sn²⁺ ions.

To calculate the voltage for this cell, we need to use the standard reduction potentials for the half reactions. The standard reduction potential for the reduction reaction is -0.76 V, and the standard reduction potential for the oxidation reaction is -0.14 V. The overall voltage for the cell is the difference between these two potentials: Ecell = Ered - Eox = (-0.76 V) - (-0.14 V) = -0.62 V.

In a galvanic cell, the reduction reaction occurs at the cathode, while the oxidation reaction occurs at the anode. In this case, the zinc electrode is the cathode, where Zn²⁺ ions are reduced to form zinc atoms. The tin electrode is the anode, where tin atoms are oxidized to form Sn²⁺ ions.

The overall reaction occurs spontaneously, as the standard reduction potential for the reduction reaction is more positive than the standard reduction potential for the oxidation reaction. This means that the electrons will flow from the anode to the cathode, generating an electrical current.

The salt bridge is used to maintain charge neutrality in the two half-cells, as the electrons flow from the anode to the cathode, and ions must move to balance the charges. Na⁺ ions move towards the anode, while NO³⁻ ions move towards the cathode. This allows for the flow of ions to maintain charge neutrality in both half-cells.

As the reaction proceeds, the mass of the tin electrode will decrease as tin atoms are oxidized to form Sn²⁺ ions. Conversely, the mass of the zinc electrode will increase as zinc ions are reduced to form zinc atoms. This is due to the conservation of mass, as the total mass of the system remains constant.

To know more about the Electrode, here

https://brainly.com/question/29585061

#SPJ4

the dissolution of ammonium nitrate occurs spontaneously in water. as nh4no3 dissolves, the temperature of the water decreases. what are the signs of the changes of h, s, and g for this process? a. incrementh < 0, increments > 0, incrementg < 0 b. incrementh > 0, increments < 0, incrementg > 0 c. incrementh > 0, increments > 0, incrementg < 0 d. incrementh < 0, increments > 0, incrementg < 0 e. incrementh < 0, increments < 0, incrementg < 0

Answers

The correct option is d. increment H < 0, incrementS > 0, incrementG < 0.

When NH4NO3 dissolves, the temperature of the water decreases. What are the signs of the changes of H, S, and G for this process?The sign of changes in enthalpy (ΔH) for the dissolution of ammonium nitrate (NH4NO3) in water is negative.

It means that the process releases heat, and it is exothermic. The dissolution of NH4NO3 in water is a spontaneous process and hence its entropy change (ΔS) is positive.

Therefore, the dissolution of NH4NO3 in water leads to an increase in the entropy of the system. Since the dissolution process is exothermic, the change in Gibbs free energy (ΔG) is negative, indicating that it is spontaneous.

Thus, the signs of changes in H, S, and G for the dissolution of ammonium nitrate in water are: ΔH < 0 When NHd ΔG < 0.

To learn more about : increment

https://brainly.com/question/14525677

#SPJ11

- I really need an answer pls -
How many grams of Cu(NO3)2 can be made from 2 moles of NaNO3 ?​

Answers

[tex]\sf \underline{CuCl_2 +\pink{2NaNO_3} \longrightarrow \pink{ Cu(NO3)_2}+2NaCl}[/tex]

According to the equation, 1 mole of [tex]\sf CuCl_2 [/tex] reacts with 2 moles of [tex]\sf NaNO_3[/tex] to produce 1 mole of [tex]\sf Cu(NO_3)_2[/tex] and 2 moles of [tex]\sf NaCl [/tex]

Molar mass of [tex]\sf Cu(NO_3)_2[/tex] -

[tex] \:\:\:\:\:\:\longrightarrow \sf 63.5 + 2\times 14 + 16 \times 6 \\[/tex]

[tex] \:\:\:\:\:\:\longrightarrow \sf 187.5 \\[/tex]

Therefore, 1 mole or, 187.5 grams [tex]\sf Cu(NO_3)_2[/tex] 2 can be made from 2 moles of [tex]\sf NaNO_3[/tex]

The diagram shows the potential energy changes for a reaction pathway.
Potential Energy
B
Reaction Pathway
Part 1: Describe how you can determine the total change in enthalpy and activation energy from the diagram, and if each is positive or negative.
Part 2: Describe how the curve will look if the reaction was exothermic. Be sure to mention changes in the potential energies of the reactants and products and the sign
changes of the enthalpy.

Answers

Answer:

Part 1:

To determine the total change in enthalpy (ΔH) from the diagram, we need to look at the difference between the potential energy of the products and the potential energy of the reactants. In this diagram, the potential energy of the products (point B) is higher than the potential energy of the reactants (point A), so ΔH is positive.

To determine the activation energy (Ea), we need to look at the difference between the potential energy of the reactants and the highest point on the curve, also known as the transition state (point C). In this diagram, the potential energy of the reactants (point A) is lower than the potential energy of the transition state (point C), so Ea is positive.

Part 2:

If the reaction was exothermic, the potential energy of the products would be lower than the potential energy of the reactants. This means that the curve would be inverted, with the potential energy decreasing as the reaction proceeds. The potential energy of the reactants would be higher than the potential energy of the products.

The enthalpy change (ΔH) for an exothermic reaction would be negative, as energy would be released during the reaction. The activation energy (Ea) would still be positive, as the reactants would still need to absorb energy to reach the transition state. However, the height of the curve would be lower for an exothermic reaction, indicating a lower activation energy.

Hope This Helps!

another metal phosphate is cobalt(iii) phosphate. it will behave similar to calcium phosphate in an acid solution, and will form an equilibrium between reactants and products. what is the net ionic equation including phases for copo4(s) dissolving in h3o (aq) ?

Answers

The net ionic equation for the dissolution of solid cobalt(III) phosphate, CoPO₄(s), in an acid solution can be written as; CoPO₄(s) + 3H₃O⁺(aq) ↔ Co₃⁺(aq) + H₂PO₄⁻(aq) + 3H₂O(l)

In this reaction, CoPO₄(s) reacts with hydronium ions, H₃O⁺(aq), to form cobalt(III) ions, Co₃⁺(aq), and hydrogen phosphate ions, H₂PO₄⁻(aq), along with water molecules, H₂O(l). The hydrogen phosphate ion, H₂PO₄⁻, is the product of the reaction and is formed by the reaction of H₃O⁺ with PO₄³⁻ in CoPO₄(s), which acts as a weak acid.

The net ionic equation only shows the species that are directly involved in the chemical reaction, so the spectator ions, such as counterions, are omitted. In this case, the counterion for CoPO₄ is not included in the net ionic equation since it does not participate in the reaction.

To know more about net ionic equation here

https://brainly.com/question/22885959

#SPJ4

how is an unknown oxidation state of an element within a compound determined

Answers

Explanation:

You assign oxidation numbers to the elements in a compound by using the Rules for Oxidation Numbers.

The oxidation number of a free element is always 0.

The oxidation number of a monatomic ion equals the charge of the ion.

The oxidation number of H is +1, but it is -1 in when combined with less electronegative elements.

The oxidation number of O in compounds is usually -2, but it is -1 in peroxides.

The oxidation number of a Group 1 element in a compound is +1.

The oxidation number of a Group 2 element in a compound is +2.

The oxidation number of a Group 17 element in a binary compound is -1.

The sum of the oxidation numbers of all of the atoms in a neutral compound is 0.

The sum of the oxidation numbers in a polyatomic ion is equal to the charge of the ion.

__________________________________________________________

I suggest you visit this website for a more detailed answer: https://socratic.org/questions/how-do-you-calculate-the-oxidation-number-of-an-element-in-a-compound

Thank you!

Based on what you have discovered, which of the following conditions would lead to formation of clouds?
1. Moist air moves up as it encounters a mountain range.
2. High pressure is moving into an area.
3. The air over a large parking lot is warmer in the afternoon than the surrounding park is.
4. The horse latitudes the areas of sinking air.
5. Low pressure moves into your area
Answer

Answers

1-Moist air moves up as it encounters a mountain range: This condition can lead to the formation of clouds because as moist air rises, it cools, and the water vapor in the air condenses into liquid water droplets or ice crystals, which can form clouds.

2-High pressure is moving into an area: High-pressure systems are associated with clear and sunny weather, so this condition is less likely to lead to the formation of clouds.

3-The air over a large parking lot is warmer in the afternoon than the surrounding park is: This condition can lead to the formation of cumulus clouds as the warm air rises and cools, and water vapor condenses into visible clouds.

4-The horse latitudes are the areas of sinking air: This condition is associated with clear and dry weather, so it is less likely to lead to the formation of clouds.

5-Low pressure moves into your area: This condition can lead to the formation of clouds as the rising warm, moist air cools and condenses into clouds.

Learn more about Moist air here:

https://brainly.com/question/30434955

#SPJ1

When the volume of a gas is
changed from 3.75 L to 6.52 L,
the temperature will change from
65.0 °C to
°C.
T = [?] °C
Assume that the number of moles and the pressure
remain constant. Be careful of the temperature units.
Temperature (8CY

Answers

Charles's Law-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

Where:-

V₁ = Initial volumeT₁ = Initial temperatureV₂ = Final volumeT₂ = Final temperature

As per question, we are given that -

V₁=3. 75 LT₁ = 65°CV₂ =6.52 L

We are given the initial temperature in °C.So, we first have to convert the temperature in Celsius to kelvin by adding 273-

[tex]\:\:\:\:\:\:\star\sf T_1[/tex] = 65+ 273 =338 K

Now that we have obtained all the required values, so we can put them into the formula and solve for T₂ :-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{\dfrac{T_2}{V_2}=\dfrac{T_1}{V_1}}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=\dfrac{T_1}{V_1} \times V_2}\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=\dfrac{338}{3.75} \times 6.52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=90.13333...... \times 6.52\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=587.669.........\:K\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=(587.67 -273)°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf T_2=314.66933…....\:°C\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow\sf \underline{T_2=314.67\:°C}\\[/tex]

Therefore, the temperature will change from 65°C to 314.67°C, when the volume of a gas is changed from 3.75 L to 6.52 L.

which of the following pairs of aqueous solutions, when mixed, give(s) a precipitation reaction? (i) potassium carbonate barium hydroxide (ii) aluminum nitrate sodium phosphate (iii) ammonium bromide potassium hydroxide a. (i) only b. (i) and (ii) only c. none gives a precipitation reaction d. (ii) only e. (iii) only

Answers

The pair of aqueous solutions that will result in a precipitation reaction is (i) potassium carbonate and barium hydroxide. When these two solutions are mixed, they will react to form solid barium carbonate and aqueous potassium hydroxide. The balanced chemical equation for this reaction is:

K2CO3(aq) + Ba(OH)2(aq) → BaCO3(s) + 2KOH(aq)

The other two pairs of solutions, (ii) aluminum nitrate and sodium phosphate, and (iii) ammonium bromide and potassium hydroxide, will not result in a precipitation reaction. When these two solutions are mixed, they will form aqueous solutions of the resulting products.

It is important to remember that the solubility rules can be used to predict whether a precipitation reaction will occur when two aqueous solutions are mixed. If one of the products formed in the reaction is insoluble in water, then a solid precipitate will form.

Learn more about precipitation here:

https://brainly.com/question/20925010

#SPJ4

if benzaldehyde was used instead of benzophenone, what would be the expected product? select one: diphenylmethanol benzene benzoic acid triphenylmethanol

Answers

Answer:

a. diphenylmethanol

Explanation:

As benzaldehyde is used instead of benzophenone, the expected product is Diphenylmethanol.

Benzophenone is a molecule of the ketone type that is made up of two phenyl groups that are bonded to a carbonyl group. In polar solvents, it is a crystalline substance that is almost white, odorless, and has a faintly sweet taste. It is commonly used as a UV light stabilizer for various plastics and as a chemical intermediate in the manufacture of pharmaceuticals, fragrances, and dyes. Diphenylmethanol is an organic compound that belongs to the class of aromatic alcohol. It is a white crystalline substance that has a sweet, floral scent. It is produced by combining benzaldehyde with the Grignard reagent. The reaction will lead to the formation of Diphenylmethanol. Therefore, if benzaldehyde was used instead of benzophenone, the expected product would be Diphenylmethanol.

To know more about benzaldehyde click here:

brainly.com/question/30278658

#SPJ11

what is the kb of the fluoride anion if a chemistry student experimentally finds that hf has a ka of 7.6x10-4 ?

Answers

The base dissociation (Kb) of the fluoride anion is 1.32 × 10⁻¹¹. The value indicates the strength of fluoride ions as a base. The lower the value of Kb, the weaker the base. The Kb of fluoride ions is quite small, indicating that it is a weak base.

To find the Kb of the fluoride anion, we need to use the relationship between the acid dissociation constant, Ka, and the base dissociation constant, Kb, for the conjugate acid-base pair.

The equation for this relationship is:

Ka x Kb = Kw

where Kw is the ion product constant for water, which is equal to 1.0 x 10⁻¹⁴ at 25°C.

In this case, the acid is HF and its conjugate base is F⁻ (fluoride). The student has determined that the Ka of HF is 7.6 x 10⁻⁴.

Therefore, we can use the above equation to solve for the Kb of F⁻:

Ka x Kb = Kw

Kb = Kw / Ka

Kb = 1.0 x 10⁻¹⁴ / 7.6 x 10⁻⁴

Kb = 1.32 x 10⁻¹¹

Therefore, the Kb of the fluoride anion is 1.32 x 10⁻¹¹.

Learn more about Base dissociation, here:

https://brainly.com/question/28336398

#SPJ4

what is the selenide ion concentration for a .200m h2s solution that has the stepwise dissociation constant

Answers

To determine the selenide ion (Se2-) concentration for a 0.200 M H2S solution that has the stepwise dissociation constant, we need to use the equilibrium constants for the reaction of H2S with water and for the reaction of HSe- with water.

The stepwise dissociation of H2S in water can be represented as:

H2S + H2O ⇌ HS- + H3O+

K1 = [HS-][H3O+] / [H2S]

The stepwise dissociation of HSe- in water can be represented as:

HSe- + H2O ⇌ Se2- + H3O+

K2 = [Se2-][H3O+] / [HSe-]

We are given that the concentration of H2S is 0.200 M. At equilibrium, some of the H2S reacts with water to form HS- and H3O+. We can assume that the initial concentration of H2S is much greater than the concentrations of HS- and H3O+ formed, so we can approximate the concentration of H2S to be 0.200 M at equilibrium. We don't know the concentration of H3O+ at this point, so we will express it in terms of x.

H2S + H2O ⇌ HS- + H3O+

Initial concentration: 0.200M 0 0 0

Change: -x +x +x

Equilibrium concentration: 0.200-x x x -

Now we can use the equilibrium concentrations to calculate the values of K1 and K2 using the given stepwise dissociation constants:

K1 = 1.1 × 10^-7 = [HS-][H3O+] / [H2S]

K2 = 1.3 × 10^-13 = [Se2-][H3O+] / [HSe-]

We can express [HSe-] in terms of [HS-] and [H2S] using the acid dissociation constant expression for H2S:

K1 = [HS-][H3O+] / [H2S]

1.1 × 10^-7 = x^2 / (0.200 - x)

Solving for x, we get:

x = 5.5 × 10^-5 M

This is the concentration of [HS-] and [H3O+] at equilibrium. To find the concentration of [Se2-], we can use the equilibrium constant expression for the reaction of HSe- with water:

K2 = [Se2-][H3O+] / [HSe-]

1.3 × 10^-13 = [Se2-](5.5 × 10^-5) / (0.200 - 5.5 × 10^-5)

Solving for [Se2-], we get:

[Se2-] = 2.6 × 10^-14 M

Therefore, the selenide ion concentration for a 0.200 M H2S solution that has the stepwise dissociation constant is 2.6 × 10^-14 M.

To know more about ion click here

brainly.com/question/14982375

#SPJ4

Which description best reflects the strategy "adopt an identity"?

People who enjoy traveling frequent a restaurant that offers an "around the world" tasting menu.
People who love the Star Wars™ films flock to the opening of the new Star Wars™ theme park.
People who love the television series Game of Thrones™ book a tour of its shooting locations.
People who wear Nike™ sneakers "just do it" when it comes to challenging physical activity.

Answers

The description that best reflects the strategy "adopt an identity" is: People who wear Nike™ sneakers "just do it" when it comes to challenging physical activity.

"Adopt an identity" is a marketing strategy that appeals to people's sense of self-identity and the desire to express themselves through the brands and products they consume. The Nike™ slogan "just do it" encourages people to identify themselves as athletes or fitness enthusiasts and to associate that identity with the brand. By adopting the identity of a Nike™ wearer, people are not only buying a product but also adopting a lifestyle and a set of values that the brand represents. This strategy is effective because it creates an emotional connection between the consumer and the brand, which can lead to brand loyalty and repeat purchases.

Learn more about strategy  here

https://brainly.com/question/15860574

#SPJ1

unsaturated fatty acids have double bonds that are in the cis configuaration. what is the consequence

Answers

The consequence of having cis configuration in double bonds of unsaturated fatty acids is that it creates a kink or bend in the fatty acid chain, which affects the packing of molecules and the fluidity of the membrane.

The cis configuration of double bonds in unsaturated fatty acids results in a kink or bend in the fatty acid chain. This bend affects the overall structure and function of the fatty acid. It causes the molecules to pack less tightly together, making them more fluid and flexible at room temperature. This property is important for cell membrane function, as it allows the membrane to remain fluid and adaptable to changing environmental conditions.

Additionally, the cis configuration can affect the biological activity of unsaturated fatty acids, influencing their interactions with enzymes and other molecules in the body.

To know more about unsaturated fatty acids, here

brainly.com/question/15029001

#SPJ4

which factor, the change in enthalpy, or the change in entropy, provides the principal driving force for this reaction.

Answers

The enthalpy is the principal driving force because it is a large enough negative value to ensure the free energy is negative, making the reaction spontaneous. Hence, option A is correct.

In order to determine the driving force for a reaction, we look at the Gibbs free energy change (ΔG). The Gibbs free energy is given by the equation:

ΔG = ΔH - TΔS

where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change. If ΔG is negative, the reaction is spontaneous, meaning that it will occur without any external input of energy. If ΔG is positive, the reaction is nonspontaneous and will only occur with an input of energy.

Assuming that ΔS° is also negative, option A is the best choice, The enthalpy is the principal driving force because it is a large enough negative value to ensure the free energy is negative, making the reaction spontaneous. This option assumes that ΔS° is negative, which would result in a negative ΔG value and a spontaneous reaction.

To know more about enthalpy, here

brainly.com/question/17285535

#SPJ4

--The complete question is, Consider the reaction CO2(g) + 2NH3(g) à CO(NH2)2(s) + H2O(l) ΔH° 298K = -134kJ b. Which factor, the change in enthalpy, ΔH°, or the change in entropy, ΔS° provides the principle driving force for the reaction at 298K? Explain.

A) The enthalpy is the principal driving force because it is a large enough negative value to ensure the free energy is negative, making the reaction spontaneous

B) The enthalpy is the principal driving force because it is a large enough negative value to ensure the free energy is positive, making the reaction nonspontaneous

C) The entropy is the principal driving force, because it is a large enough negative value to ensure the free energy is negative making the reaction spontaneous

D) The entropy is the principal driving force, because it is a large enough negative value to ensure the free energy is positive making the reaction nonspontaneous--

how the solubility product can be used to predict if a precipiate will form when two aqeuous solutions are mixed

Answers

The solubility product (Ksp) can be used to predict whether a precipitate will form when two aqueous solutions are mixed by comparing the ion product (Q) with the Ksp value.

When two solutions are mixed, the ions present in each solution may combine to form a new compound that has a low solubility, resulting in the formation of a precipitate. The solubility product constant (Ksp) is a measure of the maximum amount of a compound that can dissolve in water at equilibrium.

If the ion product (Q) of the solution is less than the Ksp value, then the solution is unsaturated and no precipitate will form. However, if Q is greater than Ksp, then the solution is supersaturated, and a precipitate will form until the concentration of ions in the solution reaches the solubility limit.

In other words, if Q>Ksp, then the solution is supersaturated, and precipitation will occur until Q=Ksp. If Q<Ksp, the solution is unsaturated, and no precipitation will occur. If Q=Ksp, the solution is at saturation and no further precipitation will occur.

To know more about  solubility product here

https://brainly.com/question/857770

#SPJ4

1 point
What volume of concentrated 1.5M is required to prepare 25 mL of a 7.0M solution?
*Answer in liters
Type your answer...
1 point

Answers

The volume of the concentrated 1.5 M solution required to prepare 25 mL of a 7.0 M solution is 0.117 L or 117 mL.

To solve the problem, we use the formula M1V1 = M2V2, which relates the initial concentration and volume of the concentrated solution (M1V1) to the final concentration and volume of the diluted solution (M2V2). In this case, we are given the final concentration (M2 = 7.0 M), the final volume (V2 = 25 mL), and the initial concentration (M1 = 1.5 M), so we can solve for the initial volume (V1) of the concentrated solution that we need to use.

We rearrange the formula to solve for V1, which gives us V1 = (M2 x V2) / M1. We substitute the given values into this equation, and we get V1 = (7.0 M x 0.025 L) / 1.5 M = 0.117 L or 117 mL.

Learn more about concentrated here:

https://brainly.com/question/10725862

#SPJ1

the atmospheric pressure on the summit of mt. everest is 0.333 atmospheres. at what temperature (in °c) does h2o boil there? (∆hvap h2o = 40.7 kj•mol–1 )

Answers

At the atmospheric pressure on the summit of Mt. Everest (0.333 atm), water boils at a temperature of approximately 2710.39 °C.

In this specific question, we are being asked to calculate the temperature (in °C) at which water boils on the summit of Mt. Everest, given that the atmospheric pressure there is 0.333 atmospheres and ∆Hvap for water is 40.7 kJ/mol.

We can use the Clausius-Clapeyron equation to solve for the boiling point of water at this pressure. The equation is given by:ln(P2/P1) = (∆Hvap/R) * (1/T1 - 1/T2)

where:P1 = 1 atm (standard pressure)

P2 = 0.333 atm (pressure on the summit of Mt. Everest)

∆Hvap = 40.7 kJ/molR = 8.31 J/mol*K (universal gas constant)

T1 = 373 K (boiling point of water at standard pressure)

T2 = ? (boiling point of water at 0.333 atm pressure)

Solving for T2, we get:T2 = T1 * {∆Hvap/R * ln(P2/P1) + 1}T2 = 373 K * {40.7 kJ/mol / (8.31 J/mol*K) *

ln(0.333 atm / 1 atm) + 1}T2 = 373 K * {7.98}T2 = 2983.54 K

We can convert the boiling point of water at 0.333 atm pressure from Kelvin to Celsius by subtracting 273.15 from the result:T2 (in °C) = 2983.54 K - 273.15K = 2710.39 °C

Therefore, at the atmospheric pressure on the summit of Mt. Everest (0.333 atm), water boils at a temperature of approximately 2710.39 °C.

To know more about atmospheric pressure refer to-

brainly.com/question/30166820#

#SPJ11

you observe a molecule that has a central carbon with an attached hydrogen atom, carboxyl group, and amino group. the molecule is a(n):

Answers

They  perform a wide range of functions in the body such as catalyzing reactions, transporting molecules, and providing structural support to cells and tissues.

When answering questions on the platform Brainly, the following guidelines should be followed:- Always be factually accurate, professional, and friendly- Be concise and do not provide extraneous amounts of detail-

Ignore any typos or irrelevant parts of the question- Use the relevant terms in your answer as provided in the student question.The molecule that has a central carbon with an attached hydrogen atom, carboxyl group, and amino group is an amino acid.

Amino acids are the building blocks of proteins. They contain an amino group (-NH2), a carboxyl group (-COOH), and a side chain (-R) attached to the central carbon atom. Some amino acids have additional functional groups such as hydroxyl (-OH), sulfur (-SH), or a ring structure.

Amino acids are the building blocks of proteins. Amino acids can form peptide bonds with other amino acids to form proteins. Proteins are the basic functional and structural units of life.

To learn more about : molecules

https://brainly.com/question/24191825

#SPJ11

explain why, if you heat carbon in air,its mass decrease

Answers

Answer:

When carbon is heated in air, it reacts with oxygen to form carbon dioxide. As the carbon reacts with oxygen to form carbon dioxide, the mass of the carbon decreases while the mass of the oxygen and carbon dioxide increases.

Answer:

When carbon is heated in air, it undergoes a process known as combustion or burning. During this process, carbon reacts with oxygen present in the air, resulting in the production of carbon dioxide gas. This reaction causes the carbon atoms to be lost in the form of carbon dioxide molecules. Hence, the original mass of carbon decreases due to the formation of lighter carbon dioxide molecules that are released into the atmosphere. Overall, the burning of carbon in air results in a reduction in its mass.

The Pacific Plate moves to the northwest at an average rate of 10 cm per year. Hawaii is in the middle of the Pacific Plate, 6,600 kilometers southeast of Japan, which is on the edge of several adjacent plates. If the Pacific Plate continues to move at the same rate and in the same direction, when will Hawaii collide with Japan? Show your work.

Answers

To solve this problem, we first need to convert the distance between Hawaii and Japan from kilometers to centimeters, which is the unit used for the plate movement rate.

6600 kilometers is equal to 6,600,000 centimeters (1 kilometer = 100,000 centimeters).

Next, we can use the formula:

distance = rate × time

to calculate the time it will take for Hawaii to collide with Japan.

Let t be the time in years. The distance traveled by the Pacific Plate in t years is:

distance = rate × time = 10 cm/year × t

So, the distance Hawaii moves in t years is 10 cm/year × t.

At the same time, Japan moves in the opposite direction at the rate of the adjacent plate, but we don't know this value. We can assume that Japan is stationary relative to the adjacent plate, so the distance it moves is zero.

The total distance between Hawaii and Japan is decreasing at a rate of 10 cm/year:

rate of decrease = 10 cm/year

So we can set up the following equation:

6,600,000 cm - 10 cm/year × t = 0

Solving for t, we get:

t = 6,600,000 cm / (10 cm/year) = 660,000 years

Therefore, it will take 660,000 years for Hawaii to collide with Japan, assuming that the Pacific Plate continues to move at the same rate and in the same direction.
Other Questions
mexican immigrants typically call immigration authorities? Yolanda and her friends were asked to paint a mural on a wall at the park. Yolanda is making a scale drawing of the mural. If every 2 inches of her drawing represents 3 feet of the actual wall, what is the area in square feet of the actual mural? the nurse is conducting a physical examination of a child with suspected developmental dysplasia of the hip. which finding would help confirm this diagnosis? which instruction would you use to interact with the uart receive buffer? group of answer choices addu li lw sw move What did you find difficult about matching the chromosomes? which cell cycle checkpoint would a cell fail if there were a large number of errors in the replicated dna? group of answer choices g1 g2 m none of these are correct. consider the difference between positive and normative policy analysis. use this knowledge to complete the passages. economics involves describing what is happening or predicting what will happen. economics concerns what should occur and involves value judgments. b. classify each statement as reflecting either positive or normative analysis. according to the video from the lecture, children show changes in their self-concept with age. when asked to describe themselves, how might a five-year-old respond? What is the speed of a wave with a wavelength of 4 cm and a frequency of 8 Hz?A. 2 cm/sB. 32cm/s C. 0.5 cm/s D. 12 cm/s BCG growth share matrix in flutter, what, primarily, determines the position and size of a particular widget? group of answer choices the constraints that its parent places upon it the themedata of its parent the pixel density of the device screen the buildcontext Part AWhich response most accurately explains how the old woman develops a theme of the story?Her abundant energy develops the theme that age is only a number. Her treatment of Mundra develops the theme that some people are incapable of building bonds with others.Her treatment of Mundra develops the theme that some people derive tremendous power by abusing others.Her negative attitude develops the theme that with age comes intolerance.Part BWhich quotation from the text best supports the response to Part A?But the woman seemed to be giving vent to her own ill nature in an evidently customary and certainly vivid way.and her mother-in-law had been pleased with her and greeted her with kind words,...Bring water," the old woman commanded fiercely and with a thrust of her foot sent the child, who had reached the door by that time,The old woman was not so busily engaged with this task, however, as to be unable to give her attention to other things. Which is the largest angle?A4OCB5Cannot tellOA76B Which term refers to a combination of attributes, such as a person's interests, values, and goals?O mental disorderO hierarchyO self esteemO identity all of the following were arguments made against the davis administration by its opponents except: a) the davis administration was corrupt b) the davis administration's policies led to excessive taxation c) the davis administration used the state police and state militia to ensure dictatorial rule over texas d) the davis administration cared little for the civil rights of the freed slaves 21. a 32-year-old man reports 1 week of feeling unusually irritable. during this time, he has increased energy and activity, sleeps less, and finds it difficult to sit still. he also is more talkative than usual and is easily distractible, to the point of finding it difficult to complete his work assignments. a physical examination and laboratory workup are negative for any medical cause of his symptoms and he takes no medications. what diagnosis best fits this clinical picture? Female ww2 pilots the original fly girls The measure of angle w is 100, and the measure of angle z is 68. a triangle has angles x, y, z. the exterior angle to angle x is w. what is the measure of angle y? 12 32 80 168 Can someone solve this please a container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm and a temperature of 465oc. how many grams of the gas are in the container?