Precipitation-hardened alloys are suitable primarily for low-temperature applications due to a combination of factors that limit their performance at high temperatures they are recrystallization resumes, there is no dispersion strengthening, there is no dispersion strengthening.
In summary, precipitation-hardened alloys are more suitable for low-temperature applications because high temperatures lead to recrystallization, weakening of precipitates, and reduced dispersion strengthening, all of which negatively impact the strength and performance of the alloy.
The Question was Incomplete, Find the full content below :
content loaded
why are most precipitation-hardened alloys suitable only for low-temperature applications? (select all that apply.)
At high temperatures, recrystallization resumes.
At high temperatures, the alloy becomes bake-hardened.
At high temperatures, the precipitates lose their strength.
At high temperatures, the alloy becomes more brittle.
At high temperatures, there is no dispersion strengthening.
Know more about recrystallization here:
https://brainly.com/question/15710621
#SPJ11
PLEASE HELP ME ASAP
An ion has 16 protons, 17
neutrons, and 18 electrons. What
is the correct isotope notation?
A. As-2 B. CI-1
33
17
C. 335-2 D. 32S-2
16
16
Enter the answer choice letter.
Answer: d
Explanation:
50cm³ of carbon(iv)oxide was exploded with 150cm³ of air containing 20% oxygen by volume.which of the reactant was in excess
Explanation:
V(CO) = 50 cm^3 = 50 ml = 0.05 l
V(air) = 150 cm^3 = 150 ml = 0.15 l
V(O2)/V(air) = 20%
_____________________________
2 CO + O2 = 2CO2
n(CO) = V(CO)/V(M) = 0.05/22.4 = 0.0022mol
V(O2)/V(air) = x/150 x=150×0.2 =30 ml=0.03l
n(O2) = V(O2)/V(M) =0.03/22.4 = 0.0013 mol
From the reaction ratio n(CO): n(O2) = 2:1
For explosing 0.0022 mol CO need 0.0011 mol O2. We have 0.0013 mol O2, then , 0.0003 mol O2 is excess.
Answer: O2 was in excess
For many purposes we can treat nitrogen as an ideal gas at temperatures above its boiling point of -196 degrees Celsius.Suppose the temperature of a sample of nitrogen gas is lowered from 19.0 degrees Celsius to -14.0 degrees Celsius, and at the same time the pressure is changed. If the initial pressure was 0.76 kPa and the volume increased by 35.0% what is the final pressure? Round your answer to the correct number of significant digits.
0.56 kPa is the final pressure.
The final pressure can be calculated using the ideal gas law equation, PV = nRT.
We know the initial pressure (P1) and initial volume (V1), the change in temperature (ΔT), and the change in volume (ΔV).
The number of moles (n) is not given, but can be calculated using the equation PV = nRT, where R is the ideal gas constant (8.314 J/molK).
[tex]n = \frac{P_1V_1 }{ RT_1}\\\\n=\frac{ (0.76 kPa)(V_1) }{ (8.314 J/molK)(19.0 + 273.15)}\\\\n = 0.039 moles[/tex]
Therefore, the final pressure (P2) can be calculated using the equation PV = nRT, where T2 is the final temperature in Kelvin and V2 is final volume.
[tex]P_2 =\frac{ nRT_2 }{ V_2}[/tex]
[tex]P_2 =\frac{ (0.039 moles)(8.314 J/molK)(-14.0 + 273.15) }{ (V_1 + \Delta V)}\\\\P_2 = 0.56 kPa[/tex]
Therefore, the final pressure is 0.56 kPa.
leran more about final pressure Refer:brainly.com/question/29283195
#SPJ1
a piece of magnesium reacts with 5.98 l of a 2.88 m solution of hydrochloric acid. how many grams of magnesium chloride will be formed?
A piece of magnesium with 8.63 mol of magnesium will react with 17.26 mol of HCl to form 820.9 g of magnesium chloride, given the reaction Mg + 2HCl → MgCl2 + H2.
The fair substance condition for the response among magnesium and hydrochloric corrosive is Mg + 2HCl → MgCl2 + H2. From the situation, it tends to be seen that one mole of magnesium responds with two moles of hydrochloric corrosive to shape one mole of magnesium chloride. To decide the quantity of moles of hydrochloric corrosive present in the arrangement, we can utilize the condition: Molarity = moles/volume.
Thusly, moles of HCl = Molarity × volume = 2.88 mol/L × 5.98 L = 17.26 mol. Since two moles of HCl respond with one mole of magnesium to shape one mole of magnesium chloride, the quantity of moles of magnesium utilized in the response is around 50% of the quantity of moles of hydrochloric corrosive, i.e., 17.26/2 = 8.63 mol. At long last, we can utilize the molar mass of magnesium chloride (95.21 g/mol) to work out the mass of magnesium chloride shaped: Mass of MgCl2 = 8.63 mol × 95.21 g/mol = 820.9 g. Accordingly, 820.9 g of magnesium chloride will be shaped.
To learn more about reactions, refer:
https://brainly.com/question/5425816
#SPJ4
potassium fluoride is added to water at a temperature of 298 k. if the initial concentration of that potassium fluoride in water is 0.251 m, then what is the ph of this solution? facts you may need: kw
The pH of the solution is 3.53 when potassium fluoride is added to water at a temperature of 298 k.
How to determine pH ?
Fluoride ion (F-) and then convert it to the dissociation constant (Ka) of its conjugate acid (HF) using the relationship:
Kw = Ka x Kb
where Kw is the ion product constant for water (1.0 x 10⁻¹⁴ at 298 K).
The Kb of fluoride ion is 1.5 x 10⁻¹¹ at 298 K. Therefore, the Ka of HF is:
Ka = Kw / Kb = (1.0 x 10⁻¹⁴) / (1.5 x 10⁻¹¹) = 6.67 x 10⁻⁴
The dissociation of HF in water is:
HF + H2O ⇌ H3O+ + F-
The equilibrium constant expression for this reaction is:
Ka = [H3O+][F-] / [HF]
At equilibrium, the concentration of HF will be equal to the initial concentration of KF, since KF is a salt of HF. Let x be the concentration of F- and [HF] = 0.251 M.
Then,
Ka = [H3O+][F-] / [HF]
6.67 x 10⁻⁴ = x² / 0.251
x = 1.13 x 10⁻³ M
The concentration of H3O+ can be calculated using the equilibrium constant expression:
Ka = [H3O+][F-] / [HF]
6.67 x 10⁻⁴ = [H3O+](1.13 x 10⁻³) / 0.251
[H3O+] = 2.95 x 10⁻⁴ M
Therefore, the pH of the solution is:
pH = -log[H3O+]
pH = -log(2.95 x 10⁻⁴)
pH = 3.53
Thus, the pH of the solution is 3.53.
Learn more about pH
brainly.com/question/15289741
#SPJ11
According to the text, how do humans impact the population growth of other ecosystems? Select all that apply.
Damming rivers
Spreading disease
Starting droughts
Clearing forests
Clearing forests.
According to the text, humans impact the population growth of other ecosystems by clearing forests.
This is because forests are important habitats for many different species, and when they are destroyed or degraded, those species are forced to relocate or die off.
Additionally, forests are also important carbon sinks, which means they help to absorb and store carbon from the atmosphere. When forests are cleared, that carbon is released back into the atmosphere, contributing to climate change.
Therefore, forest clearing by humans can have significant impacts on the population growth of other ecosystems
Learn more about Clearing forests here:
https://brainly.com/question/15336761
#SPJ1
if 50.0 ml of 0.60 m hcl is added to 25.0 ml of 0.60 m naoh, what will be the ph of the resulting solution? your answer should be rounded to two decimal places.
The pH of the resulting solution is 7.00.
When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Additionally, answers should be concise and not provide extraneous amounts of detail. Any typos or irrelevant parts of the question should be ignored.
In this case, the student question is:If 50.0 mL of 0.60 M HCl is added to 25.0 mL of 0.60 M NaOH, what will be the pH of the resulting solution? Your answer should be rounded to two decimal places.
To answer this question, it is important to first understand what happens when HCl and NaOH react. HCl is an acid, and NaOH is a base. When they react, they undergo a neutralization reaction in which the acid and base neutralize each other, producing water and a salt.
In this case, the salt produced will be sodium chloride (NaCl).The equation for this neutralization reaction is:
HCl + NaOH → NaCl + H2OWhen HCl and NaOH react, the H+ ions from HCl combine with the OH- ions from NaOH to produce water. The remaining ions (Na+ and Cl-) combine to form the salt NaCl. Because H+ ions are consumed in the reaction, the resulting solution will have a higher pH than the original HCl solution.
To calculate the pH of the resulting solution, we need to know the concentration of H+ ions in the solution. We can calculate this by using the equation for the ionization of water:
Kw = [H+][OH-]where Kw is the ion product constant for water (1.0 × 10^-14 at 25°C).At 25°C, the concentration of OH- ions in pure water is 1.0 × 10^-7 M. Because the solution resulting from the neutralization reaction will be a salt solution, we can assume that the concentration of OH- ions in the solution will be negligible.
Therefore, we can simplify the equation to:
[H+] = Kw/[OH-]
= 1.0 × 10^-14/1.0 × 10^-7
= 1.0 × 10^-7 MWe can use the concentration of H+ ions to calculate the pH of the solution:
pH = -log[H+]
= -log(1.0 × 10^-7)
= 7.00 (rounded to two decimal places)
To learn more about : solution
https://brainly.com/question/25326161
#SPJ11
use the equation of the dissociation of the weak acid and a le schatelier principle to answer the following question: what change will be caused by the addition of a small amount of the weak base b- to a solution containing weak acid hb? group of answer choices ph slightly increase; poh slightly decrease ph slightly decrease; poh slightly decrease ph increase; poh increase ph decrease; poh decrease no change at all
The dissociation equation for weak acid can be written as HB + H2O ⇌ H3O+ + B- and there will be no change in Poh at all.
The correct answer is option D.
When a stress is given to an equilibrium system, the system will move to offset the stress and reestablish equilibrium, according to Le Chatelier's principle. In this situation, adding a bitsy volume of the weak base B- to the result will raise the attention of B- in the result.
This indicates that the equilibrium will move to the left to neutralize the rise in B- attention, performing in a drop in H3O ion attention. Because pH measures the attention of H3O ions in a result, a reduction in H3O attention will affect in a rise in pH. As a result, the answer is pH slightly rises; pOH slightly falls.
Learn more about dissociation at
https://brainly.com/question/28298815
#SPJ4
water (h2o) is a polar solvent and hexane (c6h14) is a nonpolar solvent. in which solvent is hf likely to dissolve?
HF, or hydrogen fluoride, is likely to dissolve in water (H2O), a polar solvent.
This is due to the principle "like dissolves like," which means that polar solvents tend to dissolve polar solutes, and nonpolar solvents tend to dissolve nonpolar solutes. HF is a polar molecule because of the difference in electronegativity between hydrogen (H) and fluorine (F) atoms, resulting in a polar covalent bond. This bond creates a dipole moment, causing the HF molecule to have a partial positive charge on the hydrogen end and a partial negative charge on the fluorine end.
Water, as a polar solvent, has a similar dipole moment due to the difference in electronegativity between oxygen (O) and hydrogen (H) atoms. The partial positive charges on the hydrogen atoms in water molecules can interact with the partial negative charges on the fluorine atoms in HF molecules, forming hydrogen bonds. These interactions between polar molecules make it possible for HF to dissolve in water.
In conclusion, HF is likely to dissolve in water (H2O) because both are polar substances that can form hydrogen bonds, following the "like dissolves like" principle.
Know more about polar solvent here:
https://brainly.com/question/3184550
#SPJ11
2. Use Data Table 1 to answer the following: In a paragraph, describe the relationship of how the salinity and temperature will change the density of water in the tropical ocean. Use specific data to support your answer.
The density of a ocean water rises as the temperature falls. As a result, it water gets colder the denser it is. As salinity grows, seawater's density rises as well.
What connection exists between ocean density, temperature, and salinity?As the salinity rises, the density of the water rises. At all temperatures just above freezing point, seawater with a salinity more than 24.7 becomes denser as the temperature drops. Pressure increases cause seawater's density to rise.
What connection exists between the water's salinity and temperature?Fresh water is introduced into the sea as a result of rising surface temperatures, melting ice, and increased precipitation, which reduces salinity. Seawater with a lower salinity has a lower density so won't sink as far as water with a higher density. Ocean currents are modified by this process.
To know more about colder visit:
https://brainly.com/question/11211564
#SPJ1
carboxylic acids are typically prepared using oxidation reactions. which of the functional groups below can be oxidized to give a carboxylic acid product? select all that apply.
The functional groups that can be oxidized to give a carboxylic acid product are:
Primary alcoholsAlkynes. Options A and D are correct.Carboxylic acids can be prepared by oxidizing a variety of functional groups. However, not all functional groups can be oxidized to give a carboxylic acid product. In general, primary alcohols and alkynes are two types of functional groups that can be oxidized to give a carboxylic acid.
Primary alcohols are oxidized to carboxylic acids via an intermediate aldehyde using a strong oxidizing agent such as potassium permanganate (KMnO₄) or chromium trioxide (CrO₃). The aldehyde is then further oxidized to the corresponding carboxylic acid.
Alkynes, on the other hand, can be oxidized directly to carboxylic acids using a strong oxidizing agent such as ozone (O₃) or potassium permanganate (KMnO₄). Phenols and secondary alcohols, however, cannot be directly oxidized to carboxylic acids. Phenols can be oxidized to quinones, while secondary alcohols can be oxidized to ketones, but these products are different from carboxylic acids.
The complete question is
Carboxylic acids are typically prepared using oxidation reactions. Which of the functional groups below can be oxidized to give a carboxylic acid product? Select all that apply.
A) Primary alcohols
B) Phenols
C) Secondary alcohols
D) Alkynes
To know more about the Carboxylic acid, here
https://brainly.com/question/28027451
#SPJ4
What group are the alkali metals on the periodic table?
Answer: group 1A (or IA)
Explanation:
Sulfur Dioxide (SO^2) emissions from smokestacks are reduced by a scrubbing mechanism in which SO^2 gas reacts with crushed limestone (CaCO) to produce removable solid waste. The quation for the balanced reaction can be found below. How many grams of CaCO, are needed to completely react with 1250 g of SO^2
3906.114 grams of CaCO₃ is required to completely react with 1250 grams of SO₂.
What is Scrubbing mechanism?Scrubbing mechanism is a method of removing pollutants, such as sulfur dioxide (SO₂), from industrial exhaust gases. In this mechanism, a substance, such as limestone or lime, is added to the exhaust gases, which react with the pollutants to form solid waste products that can be easily removed.
Equation:The balanced chemical equation for the reaction of SO₂ gas and CaCO₃ is:
SO₂ + CaCO₃ → CaSO₃ + CO₂
From the equation, we can see that one mole of SO₂ reacts with one mole of CaCO₃. Therefore, we need to first determine the number of moles of SO₂ in 1250 g of SO₂:
molar mass of SO₂ = 32.066 g/mol
moles of SO₂ = mass of SO₂ / molar mass of SO₂
moles of SO₂ = 1250 g / 32.066 g/mol
moles of SO₂ = 39.012 mol
Since one mole of SO₂ reacts with one mole of CaCO₃, we need 39.012 moles of CaCO₃ to react with the 39.012 moles of SO₂. The molar mass of CaCO₃ is 100.086 g/mol, so we can calculate the mass of CaCO₃ needed as:
mass of CaCO₃ = moles of CaCO3₃ × molar mass of CaCO₃
mass of CaCO₃ = 39.012 mol × 100.086 g/mol
mass of CaCO₃ = 3906.114 g
Therefore, we need 3906.114 grams of CaCO₃ to completely react with 1250 grams of SO₂.
To know more about scrubbing mechanism, click here
https://brainly.com/question/30207790
#SPJ1
What pressure is exerted by 0.750 mol of a gas at a temperature of 0.00ºC and a volume of 5.00 L?
format: pv= nrt
The pressure exerted by 0.750 mol of gas at a temperature of 0.00ºC and a volume of 5.00 L is 101325 Pa.
To calculate the pressure exerted by a gas, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvin.
First, we need to convert the temperature from Celsius to Kelvin:
T = 0.00ºC + 273.15 = 273.15 K
Next, we can plug in the given values and solve for the pressure:
P = nRT/V
P = (0.750 mol)(8.314 J/mol·K)(273.15 K)/(5.00 L)
P = 101325 Pa
To know more about pressure please refer: https://brainly.com/question/16749630
#SPJ1
What is the pH of a saturated solution of Mg(OH)₂? (Ksp for Mg(OH)₂ = 6.3 × 10⁻¹⁰).
the pH of a saturated solution of Mg(OH)₂ is approximately 9.6.
The solubility product constant (Ksp) expression for Mg(OH)₂ is:
Ksp = [Mg²⁺][OH⁻]²
At equilibrium, the concentrations of Mg²⁺ and OH⁻ in a saturated solution of Mg(OH)₂ are equal to the solubility of the salt, which we can assume to be "s" (in mol/L):
[Mg²⁺] = s
[OH⁻] = 2s
Substituting these expressions into the Ksp expression, we get:
Ksp = s * (2s)²
Ksp = 4s³
We can rearrange this expression to solve for the solubility of Mg(OH)₂:
s = [tex](Ksp/4)^(1/3)[/tex]
s =[tex][(6.3 × 10⁻¹⁰)/4]^(1/3)[/tex]
s = 5.94 × 10⁻⁵ M
Now we can use the concentration of OH⁻ in the saturated solution to calculate the pH of the solution:
pOH = -log[OH⁻]
pOH = -log(2s)
pOH = -log(2(5.94 × 10⁻⁵))
pOH = 4.4
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 4.4
pH = 9.6
Learn more about saturated here:
https://brainly.com/question/30550270
#SPJ1
For what values of K will the system be unstable:
a) G = 1/(s+1) and H = (s-1)/(s+2),
b) G(s) x H(s) = (s^2+2s+2)/(s^2(s-1))
a) G = 1/(s+1) and H = (s-1)/(s+2): The system is stable for all values of K.
b) G(s) x H(s) = (s^2+2s+2)/(s^2(s-1)): The system is unstable for K > 2.
To determine the values of K for which the system is unstable, we need to use the characteristic equation and analyze the closed-loop transfer function.
a) For G = 1/(s+1) and H = (s-1)/(s+2), the closed-loop transfer function is given by:
T(s) = G(s) * H(s) / (1 + G(s) * H(s))
T(s) = (1/(s+1)) * ((s-1)/(s+2)) / (1 + (1/(s+1)) * ((s-1)/(s+2)))
To find the stability, we analyze the characteristic equation:
1 + G(s) * H(s) = 0
1 + (1/(s+1)) * ((s-1)/(s+2)) = 0
Solving this equation for s, we find that the system is stable for all values of K since there are no positive real parts of s.
b) For G(s) x H(s) = (s^2+2s+2)/(s^2(s-1)), the closed-loop transfer function is given by:
T(s) = G(s) * H(s) / (1 + G(s) * H(s))
T(s) = (s^2+2s+2)/(s^2(s-1)) / (1 + (s^2+2s+2)/(s^2(s-1)))
To find the stability, we analyze the characteristic equation:
1 + G(s) * H(s) = 0
1 + (s^2+2s+2)/(s^2(s-1)) = 0
Solving this equation for s, we find that the system is unstable when the poles of the denominator have a positive real part. In this case, the denominator is:
s^3 - s^2 + s^2 - s - 2 = s^3 - s - 2
Using the Routh-Hurwitz criterion, we find that the system is unstable when there is a change in the sign of the coefficients in the first column of the Routh array. For this cubic polynomial, the system is unstable when K > 2.
To know more about "Routh-Hurwitz criterion" refer here:
https://brainly.com/question/30424770#
#SPJ11
What gas must be present for burning to happen?
Answer:
oxygen should be present for burning to happen,
in a reaction, there are multiple ways to discuss the amount of compound produced. identify the definition of each term related to the reaction yield. the calculated amount of product under ideal conditions choose... the amount of product experimentally produced choose... the comparison of the experimental amount of product to the calculated amount choose...
In a reaction, there are multiple ways to discuss the amount of compound produced, the definition of each term related to the reaction yield. The calculated amount of product under ideal conditions is theoretical yield, the amount of product experimentally produced is actual yield, the comparison of the experimental amount of product to the calculated amount is the percent yield
In a reaction, there are multiple ways to discuss the amount of compound produced, the definition of each term related to the reaction yield is are 1. The calculated amount of product under ideal conditions is theoretical yield, the calculated amount of product under ideal conditions. The theoretical yield is calculated using stoichiometry or by utilizing the balanced equation. 2. The amount of product experimentally produced is actual yield, the amount of product experimentally produced. Actual yield is determined by performing a chemical reaction in a laboratory, measuring the mass of the products, and calculating the amount of products produced.
3. The comparison of the experimental amount of product to the calculated amount is the percent yield compares the experimental amount of product to the calculated amount. The percent yield is calculated using the following formula: percent yield = (actual yield / theoretical yield) x 100%Thus, these are the definitions of each term related to the reaction yield. So therefore the answer are theoretical yield, actual yield, and the percent yield.
Learn more about actual yield at:
https://brainly.com/question/14408642
#SPJ11
in this experiment, you are reacting cyclohexanol with phosphoric acid catalyst. what are the two products of this reaction?
The reaction of cyclohexanol with phosphoric acid catalyst typically results in the formation of cyclohexene and water as the two products.
This is a dehydration reaction in which a molecule of water is eliminated from cyclohexanol to form cyclohexene. The chemical equation for this reaction can be written as:
C6H11OH + H3PO4 → C6H10 + H2O
where C6H11OH is cyclohexanol, H3PO4 is phosphoric acid, C6H10 is cyclohexene, and H2O is water.
For more questions like catalyst visit the link below:
https://brainly.com/question/14495488
#SPJ11
3.5 grams of Nitrogen is allowed to react with 3.5 grams of Hydrogen to produce 5.6 L of Ammonia according to the following formula:
N2 + 3H2 →
2NH3
Which substance is the limiting reactant?
A.H2
B.N2
C.NH3
D.All reactants are completely used during this reaction.
B. N2 is the limiting reactant. The reactant that has the smaller number of moles in the balanced equation is the limiting reagent.
What is Limiting Reagent?
The limiting reagent is the reactant that is entirely consumed when the reaction goes to completion, and thus limits the amount of product that can be formed. The other reactants that are present in excess are not entirely consumed and do not limit the amount of product that can be formed.
To determine the limiting reactant, we need to calculate the amount of product that can be produced from each reactant and then choose the reactant that produces the smallest amount of product.
The balanced equation for the reaction is:
N2 + 3H2 → 2NH3
The molar mass of N2 is 28 g/mol, and the molar mass of H2 is 2 g/mol. Using these values, we can calculate the number of moles of each reactant:
Number of moles of N2 = 3.5 g / 28 g/mol = 0.125 mol
Number of moles of H2 = 3.5 g / 2 g/mol = 1.75 mol
According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. So, the number of moles of NH3 that can be produced from each reactant is:
Moles of NH3 produced from N2 = 0.125 mol × (2 mol NH3 / 1 mol N2) = 0.25 mol NH3
Moles of NH3 produced from H2 = 1.75 mol × (2 mol NH3 / 3 mol H2) = 1.17 mol NH3
Therefore, the limiting reactant is N2, since it produces a smaller amount of NH3 compared to H2.
Learn more about Limiting Reagent from the given link
https://brainly.com/question/26905271
#SPJ1
f, in the reaction below, 4 grams of H₂O produces 0.67 grams of HF what is the % yield?
CH₂COF + H₂O → CH₂COOH + HF
The percent yield of HF is 15.2%.
We need to first determine which is the limiting reagent in the reaction. Let's assume that H2O is the limiting reagent. The balanced chemical equation tells us that 1 mole of H2O reacts with 1 mole of HF. The molar mass of H2O is 18 g/mol and the molar mass of HF is 20 g/mol.
4 grams of H2O is equal to 4/18 = 0.22 moles of H2O.
From the balanced equation, we know that 1 mole of H2O reacts with 1 mole of HF. Therefore, 0.22 moles of H2O should produce 0.22 moles of HF.
The theoretical yield of HF is therefore:
Theoretical yield = 0.22 moles x 20 g/mol = 4.4 grams
The actual yield of HF is given as 0.67 grams.
The percent yield is then calculated as:
Percent yield = (actual yield / theoretical yield) x 100%
Percent yield = (0.67 / 4.4) x 100% = 15.2%
The percent yield of HF is 15.2%.
learn more about percent yield here
https://brainly.com/question/14714924
#SPJ1
if 9.97 g of nacl reacts with excesses of the other reactants and 3.77 g of nahco3 is isolated, what is the percent yield of the reaction?
The percent yield of the reaction is 52.6%. The balanced chemical equation for the reaction between NaCl and NaHCO3 is:
2 NaCl + NaHCO3 → Na3CO3 + H2O + CO2
The molar mass of NaCl is 58.44 g/mol, and 9.97 g of NaCl corresponds to 9.97 g / 58.44 g/mol = 0.1705 mol of NaCl.
According to the equation, 1 mole of NaCl reacts with 1/2 mole of NaHCO3. So, the amount of NaHCO3 needed to react completely with 0.1705 mol of NaCl is:
0.1705 mol NaCl x (1/2) mol NaHCO3 = 0.08525 mol NaHCO3
The actual amount of NaHCO3 isolated is 3.77 g / 84.01 g/mol = 0.0449 mol NaHCO3.
The percent yield of the reaction is:
(actual yield / theoretical yield) x 100%
= (0.0449 mol / 0.08525 mol) x 100%
= 52.6%
Find more about molar mass
brainly.com/question/29223185
#SPJ4
a compressed gas cylinder contains argon gas. the pressure inside the cylinder is psi (pounds per square inch) at a temperature of . how much gas remains in the cylinder if the pressure is decreased to psi at a temperature of ?
we can use the ideal gas law: PV = nRT where P is the pressure of the gas in pounds per square inch (psi), V is the volume of the gas in cubic inches (in^3), n is the number of moles of gas,
R is the gas constant (which is 10.73 psi·in^3/mol·K for argon), and T is the temperature of the gas in Kelvin (K).
Since we are only interested in the change in the amount of gas, we can assume that the volume of the cylinder remains constant. Therefore, we can write:
n1 = (P1 V) / (R T1)
where n1 is the initial number of moles of gas, P1 is the initial pressure of the gas, V is the volume of the gas (which we assume remains constant), R is the gas constant for argon, and T1 is the initial temperature of the gas.
To find the final number of moles of gas, we can use the same equation with the final pressure and temperature:
n2 = (P2 V) / (R T2)
where n2 is the final number of moles of gas, P2 is the final pressure of the gas, and T2 is the final temperature of the gas.
To find the change in the amount of gas, we can subtract n2 from n1:
Δn = n2 - n1 = (P2 V) / (R T2) - (P1 V) / (R T1)
Substituting the given values, we get:
Δn = [(14 psi) × V] / [(10.73 psi·in^3/mol·K) × (273 K)] - [(10 psi) × V] / [(10.73 psi·in^3/mol·K) × (300 K)]
Simplifying this expression, we get:
Δn = (4 psi × V) / (3483.9 psi·in^3/mol)
where we have converted the temperatures to Kelvin.
To find the mass of argon that remains in the cylinder, we can use the molar mass of argon, which is 39.95 g/mol. The mass of argon in the cylinder is:
m = n1 × 39.95 g/mol
Substituting n1 from the first equation, we get:
m = [(P1 V) / (R T1)] × 39.95 g/mol
To find the final mass of argon, we can use the same equation with the final number of moles:
m' = [(P2 V) / (R T2)] × 39.95 g/mol
To find the change in mass, we can subtract m' from m:
Δm = m' - m = [(P2 V) / (R T2)] × 39.95 g/mol - [(P1 V) / (R T1)] × 39.95 g/mol
Substituting the given values and simplifying, we get:
Δm = (4 psi × V) / 87.67 g
Therefore, the change in mass of argon in the cylinder is:
Δm = (4 psi × V) / 87.67 g
Note that the result depends on the volume of the cylinder, which is not given in the problem.
To know more about gas click here
brainly.com/question/14812509
#SPJ4
Esterification of propane 1,2,3-triol and unsaturated higher carboxylic acids will produce
Propan-1-ol and ethanoate are esterified Ethanoic acid and propan-1-ol combine to generate an ester. Propan-1-ol and strong acid acid ethyl ester are two isomers that make up this ester.
What byproducts of esterification are there?Esterification is a chemical reaction that produces at least one ester molecule by reacting a lactic substances (RCOOH) with such an ethanol (ROH) to create an ether (RCOOR) and water.
How is esterification rate determined?Up to around 1 moldm3, redox reactions are linked to [H+] concentration. The third kinetic equation controls with a forward reaction rate at constant [H+] concentration. where kH is the constant of proportionality of ester hydrolysis and kE is a rate constant for esterification.
To know more about Ethanoic acid visit :
https://brainly.com/question/28166727
#SPJ9
consider the cannizzaro reaction of a base with the pictured structure. aldehyde with a trichloromethyl group attached to the carbonyl what products do you expect from the reaction, after acidifying the reaction mixture? select one or more: two carbon chain with one carbon attached to a hydroxyl group and the other attached to three carbons
The Cannizzaro reaction is a redox reaction in which an aldehyde (or a ketone) is simultaneously oxidized and reduced. The reaction requires a strong base such as a hydroxide ion (OH-) to deprotonate one aldehyde molecule and a second aldehyde molecule is reduced by the resulting hydride ion (H-).
The given aldehyde with a trichloromethyl group attached to the carbonyl group will undergo the Cannizzaro reaction with OH- as the strong base. After the reaction, the mixture is acidified to protonate the products.
The trichloromethyl group (-CCl3) is a strongly electron-withdrawing group that deactivates the carbonyl group toward nucleophilic attack. Therefore, the expected products from the Cannizzaro reaction of the given aldehyde are:
A carboxylic acid, is the oxidized form of the aldehyde.
Alcohol, is the reduced form of the aldehyde.
The final products after acidification will be:
A carboxylic acid with a trichloromethyl group attached to the carbon.
Alcohol with a two-carbon chain attached to a hydroxyl group.
Therefore, the expected product(s) from the reaction, after acidifying the reaction mixture are:
A carboxylic acid with a trichloromethyl group attached to the carbon, and
Alcohol with a two-carbon chain attached to a hydroxyl group.
Find more about Cannizzaro reaction
brainly.com/question/23316578
#SPJ4
what are the products of the citric acid cycle (krebs cycle, tricarboxylic acid [tca] cycle)?
The citric acid cycle is also called the Krebs cycle or tricarboxylic acid (TCA) cycle. In this cycle, a series of chemical reactions that take place in living organisms' cells generate energy through oxidation of acetate derivatives.
The citric acid cycle has eight stages, and the products are as follows: Carbon dioxide (CO2), which is a byproduct of the conversion of pyruvate to acetyl-CoA, NADH (Nicotinamide Adenine Dinucleotide) and FADH2 (Flavin Adenine Dinucleotide), which are coenzymes involved in the oxidation of the acetyl-CoA, ATP (Adenosine Triphosphate), which is produced by substrate-level phosphorylation when the phosphate group is transferred from GTP to ADP, and Water (H2O), which is generated during the transfer of electrons from FADH2 to O2.
The citric acid cycle is an energy-producing cycle in cells that operates through oxidation of acetate derivatives. In this cycle, a series of chemical reactions that take place in living organisms' cells generate energy. The cycle happens in the matrix of the mitochondria in eukaryotic cells and in the cytoplasm of prokaryotic cells.
The citric acid cycle has eight stages, and each stage has a specific enzyme that catalyzes the reaction that converts one molecule to another. The cycle is a central metabolic pathway of aerobic organisms, and it is involved in various metabolic pathways.
To know more about citric acid cycle refer to-
brainly.com/question/29857075#
#SPJ11
GEN CHEM 2 PLEASE HELP
H2]eq = 1.1 × 10^−4 M.
How did we arrive at the value?The given equilibrium reaction is:
2H₂S(g) ⇌ 2H₂(g) + S₂(g)
The equilibrium constant, Kc, for the reaction at 700 °C is 9.0 × 10^−8.
We are given the initial number of moles of H2S as 0.700 moles in a 0.500 L flask. Let's assume that x moles of H2S is consumed at equilibrium, and therefore the equilibrium concentrations of H2 and S2 are both 2x, based on the stoichiometry of the reaction.
The expression for the equilibrium constant, Kc, is:
Kc = [H2]^2[S2]/[H2S]^2
At equilibrium, the concentration of H₂S will be (0.700 - x)/0.500 M, and the concentration of H₂ and S₂ will be 2x/0.500 M. Substituting these values in the expression for Kc and solving for x gives:
9.0 × 10^−8 = (2x/0.500 M)^2 / ((0.700 - x)/0.500 M)^2
Solving for x gives x = 5.6 × 10^−5 M.
Therefore, the equilibrium concentrations of H₂ and S₂ are both 2x = 1.1 × 10^−4 M, and the equilibrium concentration of H₂S is (0.700 - x)/0.500 M = 0.699 M.
Thus, the concentration of H2 at equilibrium is 1.1 × 10^−4 M, rounded to the correct number of significant figures.
Therefore, [H2]eq = 1.1 × 10^−4 M.
learn more about equilibrium reaction: https://brainly.com/question/18849238
#SPJ1
the reaction between solid sodium and iron iii oxide is one in a series of reactions that inflates an automobile airbag. as a single replacement reaction and a redox reaction
The reaction between solid sodium and iron III oxide is:
2 Na(s) + Fe2O3(s) → 2 NaFeO2(s) + 1/2 O2(g).
Sodium is a chemical element with the symbol Na and atomic number 11. It is a soft, silvery-white metal that belongs to the alkali metal group in the periodic table. Sodium is highly reactive, particularly in the presence of water, and is never found free in nature. It was first isolated by Sir Humphry Davy in 1807 using electrolysis. Sodium is an essential element for all living organisms, and it plays a crucial role in various physiological processes, including fluid balance, nerve impulse transmission, and muscle function. Sodium is also widely used in the production of many industrial chemicals, including sodium hydroxide (caustic soda), sodium carbonate (washing soda), and sodium bicarbonate (baking soda). Sodium compounds are also used in the manufacturing of soaps, detergents, paper, and textiles. However, excessive sodium intake can lead to health problems such as high blood pressure and cardiovascular diseases.
Learn more about sodium here:
https://brainly.com/question/18723610
#SPJ1
lucas adds 10g of table salt and 20g of sand to 50 g of distilled water the mixture is then stirred for 1 hour which technique will allow lucas to separate the mixture
The filtration technique can be used by Lucan to separate the mixture.
Filtering is a physical separation procedure that uses a filter media with a complicated structure that only allows fluid to flow through it to separate solid particles and liquid from a combination. Filtrate is the term for the fluid that passes through large solid particles that cannot pass through the filter medium.
The procedure for utilizing filtration to separate the mixture is as follows:
Filter paper should be placed in a funnel and wetted with distilled water.Put a beaker on top of the funnel.Through the filter paper, pour the salt, sand, and water combination.Although the salt and water flow through and are collected in the beaker, the sand will be held on the filter paper.Lucas can use the evaporation method to separate the salt and water. A flame may be used to heat the beaker containing the saltwater solution, which will cause the water to evaporate and leave the salt behind.To learn more about filtration, refer to:
https://brainly.com/question/29756050
#SPJ4
What is the balanced equation for
When heated nitrogen gas and hydrogen gas react to produce ammonia gas?
Answer:
The balanced chemical equation for the formation of ammonia gas by the reaction between nitrogen gas an hydrogen gas is given. N2+3H→2NH3.
Explanation:
I hope it's correct
Answer:
The balanced equation for the reaction between nitrogen gas and hydrogen gas to produce ammonia gas is: N2(g) + 3H2(g) -> 2NH3(g) This equation shows that one molecule of nitrogen gas reacts with three molecules of hydrogen gas to produce two molecules of ammonia gas. The coefficients in the balanced equation indicate that the number of atoms of each element is conserved in the reaction.