It is common practice to remove impurities from the reconstituted product by rinsing the solids obtained from the reconstituted with a small volume of cold solvent used in the process. Here option B is the correct answer.
The common practice of rinsing the solids obtained from recrystallization with a small quantity of the cold solvent used in the procedure serves to remove any residual impurities from the recrystallized product.
This is done by dissolving any residual impurities present in the crystals, which are then removed along with the solvent through filtration. The small quantity of cold solvent used is not enough to dissolve any of the pure crystals, so the recrystallized product remains pure.
Rinsing also helps to remove any residual solvent present in the crystals, which could affect the yield and purity of the product. In summary, the rinsing step is necessary to ensure that the recrystallized product is pure and free from any residual impurities or solvents that could affect its properties or intended use.
To learn more about cold solvents
https://brainly.com/question/27994300
#SPJ4
Complete question:
Why is it common practice to rinse the solids obtained from the recrystallization with a small quantity of the cold solvent used in the procedure?
A) To increase the yield of the recrystallized product
B) To remove impurities from the recrystallized product
C) To remove residual solvent from the recrystallized product
D) To reduce the size of the crystals in the recrystallized product
E) To prevent the crystals from drying out and losing their purity
what is the ph of a solution with a hydronium ion concentration of 0.01 mole per liter? * (1) 1 (2) 2 (3) 10 (4) 14
the pH of the given solution is 2.
pH is a measure of the acidity or alkalinity of a solution, and is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in the solution. pH values range from 0 to 14, with a pH of 7 being neutral, a pH below 7 being acidic, and a pH above 7 being alkaline or basic.
A low pH value indicates a high concentration of hydrogen ions, which makes the solution acidic. A high pH value indicates a low concentration of hydrogen ions, which makes the solution basic. The pH scale is commonly used in many fields, including chemistry, biology, environmental science, and medicine, to describe and quantify the acidity or alkalinity of a solution.
The pH of a solution with a hydronium ion concentration of 0.01 mole per liter can be calculated using the formula:
pH = -log[H3O+]
where [H3O+] is the concentration of hydronium ions in moles per liter.
Substituting the given value, we get:
pH = -log(0.01)
Using a calculator, we get:
pH = 2
Therefore, the pH of the given solution is 2.
To know more about pH go through:-
https://brainly.com/question/172153
#SPJ4
what do you still think about what determines the Moon's appearance from Earth?
Answer:
I think that the moon's rotation around the Earth shows us different parts of the moon
Explanation:
Answer:
The biggest clue to why the Moon always looks different when you look up at the sky is that it is constantly moving in relation to Earth and the Sun.
Explanation:
when 7.5 x 10-4 g of koh is dissolved in 1.00 l of 1.0 x 10-10 m cu(no3)2, a precipitate of cu(oh)2 is formed. true or false? (ksp of cu(oh)2 is 2.2 x 10-20)
The given statement {When 7.5 x 10^-4 g of KOH is dissolved in 1.00 L of 1.0 x 10^-10 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed} is True. This is because the Ksp of Cu(OH)2 (2.2 x 10^-20) is exceeded, leading to the formation of a precipitate. So the answer is true.
When 7.5 x 10-4 g of KOH is dissolved in 1.00 L of 1.0 x 10-10 M Cu(NO3)2, a precipitate of Cu(OH)2 is formed. This statement is true.
The equation is given below:
Cu(NO3)2 + 2KOH → Cu(OH)2 + 2KNO3, the given Ksp value for Cu(OH)2 is 2.2 x 10-20.
Molarity of Cu(NO3)2 is given by:
M = (1.0 x 10-10 mol/L) = moles of solute/L of solution= n/1.0 L1.0 x 10-10 = n/1.0 n = 1.0 x 10-10 mol
Amount of KOH is given by: Molarity of KOH = moles of solute/L of solution M = 7.5 x 10-4 g/(56.11 g/mol)/1.0 L= 1.336 x 10-5 mol/L, the balanced equation shows that the ratio of Cu(NO3)2 to KOH is 1:2.
Thus, moles of KOH = 2 x moles of Cu(NO3)2. Hence moles of Cu(NO3)2 = 1.0 x 10-10 mol/L x 1.0 L = 1.0 x 10-10 mol.
Moles of KOH = 2 x 1.0 x 10-10 mol = 2.0 x 10-10 mol.
Now we have the amount of both Cu(NO3)2 and KOH used in the reaction. The Ksp of Cu(OH)2 is given as 2.2 x 10-20.
The formula of Ksp is;
Ksp = [Cu2+][OH-]2Cu2+ and OH- are produced in a 1:2 molar ratio according to the balanced equation.
Therefore, [Cu2+] = 1.0 x 10-10 mol/L and [OH-] = 2 x 2.0 x 10-10 mol/L = 4.0 x 10-10 mol/L.
The value of Ksp is calculated as follows:
Ksp = [Cu2+][OH-]2= (1.0 x 10-10 mol/L)(4.0 x 10-10 mol/L)2= 1.6 x 10-28 mol3/L3.
This Ksp value is less than the given Ksp of Cu(OH)2 (2.2 x 10-20), which implies that a precipitate of Cu(OH)2 will form, and the statement is true.
For more questions on: KOH
https://brainly.com/question/31213916
#SPJ11
what effect, if any, do you expect the three different substituents on the aromatic ring (para-chloro, para-methoxy, para-methyl) to have on the reaction? explain g
The para-methyl group is not expected to strongly influence the electronic properties of the ring but may affect its steric accessibility to reacting species.
the substituents on an aromatic ring can have a tremendous influence on the reactivity and selectivity of reactions that involve the ring in the case of the three unique substituents you noted para-chloro para-methoxy para-methyl they will probable have exceptional penalties on the response primarily based on their digital and steric properties para-chloro chlorine is an electron-withdrawing group which ability it will pull electrons away from the ring making it a whole lot much less electron-rich and extra inclined to electrophilic assault this can make the ring extra reactive closer to electrophilic fragrant substitution EAS reactions which comprise the addition of an electrophile to the ring the presence of a chlorine substituent can additionally have an impact on the regioselectivity of the reaction favoring substitution at the para role para-methoxy methoxy -och₃ is an electron-donating team which ability it will donate electrons to the ring making it greater electron-rich and much less susceptible to electrophilic assault this can make the ring plenty much less reactive in the direction of EAS reactions on the other hand the methoxy group can moreover increase the nucleophilicity of the ring making it more inclined to nucleophilic aromatic substitution NAS reactions the presence of a methoxy substituent can additionally have an effect on the regioselectivity of the reaction favoring substitution at the ortho and para positions para-methyl methyl -ch₃ is a as a substitute inert substituent that ability it does not strongly have an effect on the electron density of the ring or its reactivity toward EAS or NAS reactions however the presence of a methyl crew can affect the steric properties of the ring making it higher or a whole lot less on hand to the reacting species relying on the special reaction stipulations
learn more about aromatic ring here : brainly.com/question/28286554
#SPJ4
What is the minimum mass of Mg(NO₃)₂ that must be added to 1.00 L of a 0.560 M HF solution to begin precipitation of MgF₂(s)? For MgF₂, Ksp = 7.4 × 10⁻⁹, and Ka for HF = 7.2 × 10⁻⁴.
the minimum mass of Mg(NO₃)₂ required to begin precipitation of MgF₂ is 6.37 × 10⁻³ g/L.
The balanced equation for the precipitation of MgF₂ from Mg(NO₃)₂ and HF is:
Mg(NO₃)₂ + 2HF → MgF₂(s) + 2HNO₃
The concentration of fluoride ions can be found using the equilibrium expression for the dissociation of HF:
HF + H₂O ⇌ H₃O⁺ + F⁻
Ka = [H₃O⁺][F⁻]/[HF]
Since the initial concentration of HF is 0.560 M, the concentration of [H₃O⁺] is negligible compared to [HF] because HF is a weak acid. Therefore, we can simplify the expression to:
Ka = [F⁻][HF]/[HF] = [F⁻]
[F⁻] = Ka = 7.2 × 10⁻⁴ M
Now we need to determine the minimum amount of Mg(NO₃)₂ required to provide enough fluoride ions to reach the saturation point of MgF₂.
Let's assume x moles of Mg(NO₃)₂ is added to 1.00 L of 0.560 M HF solution. This will result in the addition of 2x moles of F⁻ ions to the solution.
The molar solubility of MgF₂ is equal to the square root of Ksp because the stoichiometric coefficients are 1 for both MgF₂ and Mg(NO₃)₂.
Molar solubility of MgF₂ = sqrt(Ksp) = sqrt(7.4 × 10⁻⁹) = 8.6 × 10⁻⁵ M
To reach saturation, the concentration of F⁻ ions must be equal to the molar solubility of MgF₂. Therefore:
[F⁻] = 8.6 × 10⁻⁵ M = 2x moles/L
x = 4.3 × 10⁻⁵ moles/L
The mass of Mg(NO₃)₂ required is then:
mass = moles × molar mass = (4.3 × 10⁻⁵ mol/L) × (148.3 g/mol) = 6.37 × 10⁻³ g/L.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ1
what is the uncertainty in the molarity of your edta titrant? show your worked out solution in the space provided below and enter your final answer for standard deviation and percent relative standard deviation.
The standard deviation and per cent relative standard deviation, which represent the uncertainty in the molarity of your EDTA titrant.
To calculate the uncertainty in the molarity of your EDTA titrant, we need some information about the measurements taken during the titration process. However, since the information is not provided, I will give you a general step-by-step guide to finding the uncertainty in molarity:
1. Record the volume measurements (in mL) for each titration trial.
2. Calculate the molarity of the EDTA titrant for each trial using the balanced equation of the reaction and the known molarity and volume of the analyte solution.
3. Find the mean (average) molarity of the EDTA titrant by summing the molarities calculated in step 2 and dividing by the total number of trials.
4. Calculate the deviation for each trial by subtracting the mean molarity from the molarity of each trial.
5. Square each deviation calculated in step 4.
6. Sum the squared deviations and divide by the total number of trials minus one (n-1) to find the variance.
7. Calculate the standard deviation by taking the square root of the variance.
8. Calculate the per cent relative standard deviation by dividing the standard deviation by the mean molarity and multiplying by 100.
After following these steps, you will have found the standard deviation and per cent relative standard deviation, which represents the uncertainty in the molarity of your EDTA titrant.
For more such questions on EDTA titrant.
brainly.com/question/30667405
#SPJ11
what is the relationship between absorbance and concentration, and how is this illustrated in your spectra of the buffered 2-naphthol solutions? g
The term absorbance is directly proportional to the concentration (c) of the solution which is used in the experiment of the spectra.
The absorbance is defined as the term which is said to be directly proportional to the length of the light path that is equal to the width of the cuvette. The relationship between concentration and absorbance can be explained by the Beer-Lambert law. This law relates the attenuation of light to the properties of a material. The Beer-Lambert law is defined as the law which states that the concentration of a chemical solution is directly proportional to its absorption of light.
The acid dissociation constants were determined in the spectra will be 2.97 pKa* and 9.47 pKa. The pKa and pKa* values are corresponded well with literature values of 9.45 and 3.0 with a 0.2 and 1.0% difference, respectively. This was determined that 2-naphthol is a weaker acid in the ground state than the excited state due to the value of pKa > pKa.
To learn more about absorbance
https://brainly.com/question/14919298
#SPJ4
part d.3. instead of conc nh, being added to the solution, 6 m naoh is added (both are bases). how will this affect the test for the identification of copper(ii) ion in the solution? explain.
We get the dark blue color precipitate which contains [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution when 6 M Na OH is added.
When the 6M Na OH is used instead of the NH3 in a solution then [tex]Cu^{2+}[/tex]ions will be precipitate out as the [tex]Cu(OH)_{2}[/tex] in the solution. When the NH3 is used the [tex]Cu^{2+}[/tex] ions will form a complex with the NH3 in the solution which can be expressed as,
[tex]Cu^{2+}[/tex] + [tex]4NH_{3}[/tex] ----> [[tex]Cu(NH3)4]^{2+}[/tex] (aq.) + 2[tex]OH^{-}[/tex](aq.)
The complex of the [tex]Cu^{2+}[/tex] is soluble which gives dark blue color to the solution.
Therefore by using the 6 M Na OH we can get the blue precipitate of the [tex]Cu(OH)_{2}[/tex] . Precipitation is defined as the process of transforming a dissolved substance of the solution into an insoluble solid. The solid formed is called the precipitate of the solution.
and by using the NH3 we can get the dark blue color of the solution that contains [tex]Cu(NH3)4]^{2+}[/tex](aq.) complex ions of the solution.
To learn more about Precipitate
https://brainly.com/question/30764379
#SPJ4
The correct question is,
Instead of conc. NH3 being added to the solution, 6 M Na OH is added (both are bases). How will this affect the test for the identification of copper(II) ion in the solution. Explain
the major source of indoor air pollution in developing countries is group of answer choices lead based paints on furniture and walls. cigarette smoke. synthetic materials in construction of buildings. indoor cooking with biomass as a fuel. release of radon-222 gas.
Indoor cooking with biomass fuel is the major source of indoor air pollution in developing countries, causing health risks.
The significant wellspring of indoor air contamination in emerging nations is indoor cooking with biomass as a fuel. Biomass fills, like wood, charcoal, and creature waste, are regularly utilized for cooking and warming in many non-industrial nations. Be that as it may, consuming these powers delivers a scope of poisons very high, including particulate matter, carbon monoxide, and nitrogen oxides, which can have serious wellbeing impacts.
Toxic paints on furnishings and walls, tobacco smoke, manufactured materials in development of structures, and arrival of radon-222 gas are additionally wellsprings of indoor air contamination, yet they are not as predominant in that frame of mind as indoor cooking with biomass fuel. Resolving this issue through clean cooking arrangements and advancing the utilization of cleaner powers can essentially further develop indoor air quality and decrease wellbeing gambles in these districts.
To learn more about biomass, refer:
https://brainly.com/question/28217240
#SPJ4
would a solution of LiF be electrically condition?
A solutions that is highly reactive & consists ions— molecules or atoms that also have received or exchanged electrons—is an electrolyte solution.
Electrically, what charge does an electrolyte solution have?Since the final cost on I equal the net cost on (ii), the electrolytic mixture is always neutral (iii). Unlike with the superconductor, the sodium chloride conducts the electrical charge by virtue of progression of its (iv). The characteristic that causes a metal to prefer to dissolve in positive charge is defined as (v).
Are electrolytes positively charged?Substances known as electrolytes show a natural positive or negative static electricity when submerged in water. Several body activities are supported by them, including controlling nuclear reactions or preserving overall proportion of liquids both inside and outside your cells.
To know more about electrons visit:
https://brainly.com/question/28977387
#SPJ1
when the temperature of ice-cold water is increased slightly, does it undergo a net expansion or a net contraction? group of answer choices neither contraction nor expansion expansion a combination of expansion (due to increased molecular motion) and contraction (due to crystal collapse) leads to a net expansion. contraction
The rate at which the water expands continues to increase until it reaches the freezing temperature of 0°C or 32°F.
When the temperature of ice-cold water is increased slightly, it undergoes a net contraction. In the case of water, the density of water is at a maximum at 4°C or 39°F. This implies that, as the temperature of water decreases, its density will increase until it reaches 4°C. As a result, the water will begin to expand again.
As a result, when the temperature of ice-cold water is increased slightly, it will undergo a net contraction.According to the Density Anomalies of Water experiment, as the temperature of water decreases, its density increases.
Water achieves its maximum density at 4°C or 39°F. When the temperature of water falls below 4°C, the water starts to expand. At this point, the water begins to freeze, causing a further expansion in volume.
To learn more about : temperature
https://brainly.com/question/4735135
#SPJ11
The ph curve ends with a ph of
A. 0-3
B. 4-7
C. 7-10
D. 11-14
Select the best answer for the question.
16. Which statement gives you enough information to say that the atom is electrically
neutral?
A. The atom has 15 neutrons and 15 electrons.
B. The atom has 19 electrons and 19 neutrons.
C. The atom has 7 protons and 7 electrons.
D. The atom has 4 neutrons and 4 protons.
When Muhammad died, his followers carried on the new religion. Islam prospered and grew under the Caliph Abu-Bakr and those who followed him. What cities became hubs of Muslim thought and power? How did word of this new religion spread? Did it appeal to people outside the Arabian Peninsula?
Explanation:
5
1 point
What volume of concentrated 18M solution is required to prepare 550 mL of a 2.0M solution?
Type your answer...
1 point
What volume of concentrated 1.5M is required to prepare 25 mL of a 7.0M solution?
Answer in liters
1-61.11 ml of the 18 M solution is required to prepare 550 ml of a 2.0 M solution.
2-0.117 liters or 117 ml of the 1.5 M solution is required to prepare 25 ml of a 7.0 M solution.
To calculate the volume of concentrated 18 M solution required to prepare 550 ml of a 2.0 M solution, we can use the formula:
M1V1 = M2V2
where:
M1 = 18 M (concentration of concentrated solution)
V1 = volume of concentrated solution to be added (unknown)
M2 = 2.0 M (final concentration required)
V2 = 550 ml (final volume required)
Rearranging the formula to solve for V1:
V1 = (M2 x V2) / M1
Substituting the values given:
V1 = (2.0 M x 550 ml) / 18 M
V1 = 61.11 ml
To calculate the volume of concentrated 1.5 M solution required to prepare 25 ml of a 7.0 M solution, we can again use the formula:
M1V1 = M2V2
where:
M1 = 1.5 M (concentration of concentrated solution)
V1 = volume of concentrated solution to be added (unknown)
M2 = 7.0 M (final concentration required)
V2 = 25 ml (final volume required)
Converting the final volume required to liters:
V2 = 25 ml = 0.025 L
Rearranging the formula to solve for V1:
V1 = (M2 x V2) / M1
Substituting the values given:
V1 = (7.0 M x 0.025 L) / 1.5 M
V1 = 0.117 L
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ1
2. How are the electron arrangements in each pair of elements similar?
b) O and Se
a) Ba and Sr
c) N and As
Both Ba and Sr belong to the same group of elements in the periodic table Oxygen and selenium both belong to group 16 of the periodic table Nitrogen and arsenic belong to the same periodic table group of elements.
How do the electron arrangements of Ba and Sr contribute to their similar chemical properties?Ba and Sr both have two valence electrons in their outermost shell and belong to the same group of elements in the periodic table, the alkaline earth metal group.
This similarity in electron arrangement leads to similar chemical properties.
What is the significance of nitrogen and arsenic belonging to the same group in the periodic table?Nitrogen and arsenic belong to group 15 of the periodic table, also known as the nitrogen group. Both elements have five valence electrons in their outermost shell, and their shared electron arrangement contributes to similar chemical properties such as their ability to form compounds with three other atoms.
To know more about periodic table,visit:
https://brainly.com/question/11155928
#SPJ1
A group of students is comparing the graphs of strong acid-strong base and weak acid-strong base titration curves, where the base is the titrant. Which statement inaccurately describes a difference between the two curves?
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve because the weak acid requires more titrant to be neutralized than the strong acid, so the pH changes more slowly initially.
A. The initial pH for the weak acid-strong base curve is higher than the initial pH for the strong acid-strong base curve.
This statement is inaccurate. In fact, the initial pH for the weak acid-strong base curve is lower than the initial pH for the strong acid-strong base curve. This is because a weak acid has a higher initial pH than a strong acid due to the lower concentration of H+ ions in solution.
B. At the equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the equivalence point of a weak acid-strong base titration, the pH is greater than 7 due to the presence of the conjugate base of the weak acid in solution. At the equivalence point of a strong acid-strong base titration, the pH is 7.
C. At the half-equivalence points, the pH of the weak acid-strong base is greater than the pH of the strong acid-strong base.
This statement is accurate. At the half-equivalence point of a weak acid-strong base titration, the pH is greater than 7 because the solution contains both the weak acid and its conjugate base. At the half-equivalence point of a strong acid-strong base titration, the pH is 7.
D. The steep-rise interval in the weak acid-strong base curve is more pronounced than in the strong acid-strong base curve.
Learn more about concentration here:
https://brainly.com/question/13872928
#SPJ1
the following experiment was carried out using a newly synthesized chlorofluorocarbon. exactly 50 ml of the gas effused through a porous barrier in 157 s. the same volume of argon effused in 76 s under the same conditions. which compound is the chlorofluorocarbon?
The molar mass corresponds to the chlorofluorocarbon CF3Cl (Freon-11), which has a molar mass of 137.37 g/mol. Therefore, the chlorofluorocarbon in the experiment is CF3Cl.
The rate of effusion of a gas through a porous barrier is inversely proportional to the square root of its molar mass. Therefore, we can use the rate of effusion to determine the relative molar mass of the two gases and identify which one is a chlorofluorocarbon.
The rate of effusion can be calculated using Graham's law:
Rate of effusion = Volume of gas / Time taken to effuse
For the chlorofluorocarbon, the rate of effusion is:
Rate of effusion (CFC) = 50 mL / 157 s = 0.3185 mL/s
For argon, the rate of effusion is:
Rate of effusion (Ar) = 50 mL / 76 s = 0.6579 mL/s
Using Graham's law, we can set up the following equation:
Rate of effusion (CFC) / Rate of effusion (Ar) = sqrt(Molar mass (Ar) / Molar mass (CFC))
Solving for the ratio of molar masses:
Molar mass (Ar) / Molar mass (CFC) = (Rate of effusion (Ar) / Rate of effusion (CFC))^2
Molar mass (Ar) / Molar mass (CFC) = (0.6579 mL/s / 0.3185 mL/s)^2
Molar mass (Ar) / Molar mass (CFC) = 4.294
Molar mass (CFC) = Molar mass (Ar) / 4.294
The molar mass of argon is 39.95 g/mol. Therefore, the molar mass of chlorofluorocarbon is:
Molar mass (CFC) = 39.95 g/mol / 4.294 = 9.30 g/mol
To learn more about molar mass
https://brainly.com/question/13152455
#SPJ4
25.0 ml of 0.212 m naoh is neutralized by 13.6 ml of an hcl solution. the molarity of the hcl solution is . group of answer choices 0.115 m 0.212 m 0.137 m 0.390 m 0.500 m
The molarity of the HCl solution is approximately 0.390 M.
To find the molarity of the HCl solution, you can use the formula:
Molarity of acid(M2) x Volume of acid(V2) = Molarity of base(M1) x Volume of base(V1)
Molarity of acid(M2) = (Molarity of base(M1) x Volume of base(V1)) / Volume of acid(V2)
Therefore,
M1V1 = M2V2
where M1 and V1 are the molarity and volume of NaOH, and M2 and V2 are the molarity and volume of HCl.
Given:
M1 = 0.212 M (NaOH)
V1 = 25.0 mL (NaOH)
V2 = 13.6 mL (HCl)
You need to find M2 (molarity of HCl).
Step 1: Rearrange the formula to solve for M2:
M2 = (M1V1) / V2
Step 2: Plug in the given values:
M2 = (0.212 M * 25.0 mL) / 13.6 mL
Step 3: Calculate the result:
M2 ≈ 0.390 M
So, the molarity of the HCl solution is approximately 0.390 M.
Learn more about molarity here:
brainly.com/question/2817451
#SPJ11
choose the transition state for the following SN2 reaction CI +NaSH ---> SH + NaCI. a) I B) II C) III D) IV
The transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.
Transition state in a chemical reaction can be referred to as a molecular configuration that describes the point of maximum energy in the reaction path during which the bonds that are involved in the chemical reaction are in a state of change.
Transition state theory provides detailed explanations of the reaction rates and reaction mechanisms occurring in the gas phase.
The reaction mechanism in question is a substitution reaction in which the hydroxyl ion attacks the alkyl halide, resulting in the creation of an intermediate complex.
The complex is created in a transition state involving the transfer of a negatively charged ion, which will lead to a new bond forming with the incoming nucleophile.
In conclusion, the transition state for the following SN2 reaction CI + NaSH ---> SH + NaCI is option III.
To know more about transition state refer to-
brainly.com/question/30259181#
#SPJ11
14. Activities in the human body are represented in the diagram below Heat released from body by blood vessels dilating or by sweating Blood temperature decreases L Signals via blood ୮ Blood temperature increases L Brain Skin Skin Heat conserved by blood vessels constricting or by not sweating (Not drawn to scale) alel Ĵ "Too hot" Signals to skin via nerves "Too cold" Source: Campbell and Reece, Biology, 6th edition (adapted) Which title would be appropriate for the diagram? A) Rate of Excretion Varies in Response to Amount of Water Taken In B) Feedback Mechanisms Help to Maintain Homeostasis C) Respiratory Rate Responds to an Increase in Muscle Activity D) The Nervous System Responds to Changes in Blood Sugar Levels
Heat manufacturing is a feature of metabolism. Most of the warmth produced in the body is generated in the liver, brain, heart, and skeletal muscle mass all through exercise.
What is the technique through which warmness is produced in human body?In our body, cellular respiration leads to formation of water, carbon dioxide and launch of energy. This energy is stored in the shape of ATP. Some structure of this strength is utilised in day by day things to do and the excess is launched in the form of heat.
Which of the following is the method in which heat is misplaced from the body as wind passes over it?Cooling Your Body
Convection happens when warmness is carried away from your body by means of shifting air. If the surrounding air is cooler than your skin, the air will absorb your heat and rise.
Learn more about human body here;
https://brainly.com/question/2844926
#SPJ9
5.0 L of a gas goes from 1.0 atm to 1.3 atm. Calculate the final volume of this gas.
Answer: The heat capacity of a bomb calorimeter is 500 J°C.
if i contain 3 moles of gas in a container with a volume of 60 liters and at a tempurature of 400k what is the pressure indise the container
If I contain 3 moles of gas in a container with a volume of 60 liters and at a temperature of 400 K,The pressure inside the container is approximately 16.42 atm.
Using the Ideal Gas Law, we can calculate the pressure inside the container. The Ideal Gas Law is expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
In this case, you have 3 moles of gas (n = 3), a volume of 60 liters (V = 60 L), and a temperature of 400 K (T = 400 K). The gas constant (R) for this equation is 8.314 J/(mol·K), but since we are using liters and atm, we need to use the value 0.0821 L·atm/(mol· K).
Now, we can plug the values into the equation:
P × 60 L = 3 mol × 0.0821 L·atm/(mol·K) × 400 K
To find the pressure (P), we will rearrange the equation and solve for P:
P = (3 mol × 0.0821 L·atm/(mol·K) × 400 K) / 60 L
P ≈ 16.42 atm
So, the pressure inside the container is approximately 16.42 atm.
Know more about Ideal Gas Law here:
https://brainly.com/question/27870704
#SPJ11
what is the final volume of 5.31L of an ideal gas when heated from 200 K to 300 K at constant pressure?
The final volume of the gas is approximately 7.97 L. This type of process is often represented on a pressure-volume (PV) diagram as a horizontal line, where the pressure is constant and the volume changes.
What is Constant Pressure?
Constant pressure refers to a thermodynamic process where the pressure of the system remains constant throughout the process. This means that if a gas is undergoing a constant pressure process, its pressure will remain the same, but its volume, temperature, and other properties may change. In a constant pressure process, the system can exchange heat with its surroundings, but the pressure remains constant.
We can use Charles's Law to solve this problem, which states that at constant pressure, the volume of an ideal gas is directly proportional to its temperature in Kelvin.
We can set up a proportion:
(V₁/T₁) = (V₂/T₂)
where V₁ is the initial volume (5.31 L), T₁ is the initial temperature (200 K), V₂ is the final volume (what we want to find), and T₂ is the final temperature (300 K).
Solving for V₂:
V₂ = (V₁/T₁) x T₂
V₂ = (5.31 L / 200 K) x 300 K
V₂ = 7.965 L
Learn more about Constant Pressure from the given link
https://brainly.com/question/1480756
#SPJ1
what is the answer to the question?
To determine the number of moles of reactants required to produce 6.2 moles of phosphoric acid (H₃PO₄), we need to use stoichiometry.
How many moles of reactant were required to form phosphoric acid?From the balanced equation, we can see that 1 mole of P₄O₁₀ reacts with 6 moles of H₂O to produce 4 moles of H₃PO₄. This means that the ratio of P₄O₁₀ to H₃PO₄ is 1:4, and the ratio of H₂O to H₃PO₄ is 6:4, or 3:2.
To find the number of moles of P₄O₁₀ required, we can set up a proportion:
1 mole P₄O₁₀ / 4 moles H₃PO₄ = x moles P₄O₁₀ / 6.2 moles H₃PO₄
Solving for x, we get:
x = (1 mole P₄O₁₀ / 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 1.55 moles P₄O₁₀
Therefore, 1.55 moles of P₄O₁₀ were required to produce 6.2 moles of H₃PO₄.
To find the number of moles of H₂O required, we can set up a similar proportion:
6 moles H₂O/ 4 moles H₃PO₄ = x moles H₂O/ 6.2 moles H₃PO₄
Solving for x, we get:
x = (6 moles H₂O/ 4 moles H₃PO₄ ) x (6.2 moles H₃PO₄ ) = 9.3 moles H₂O
Therefore, 9.3 moles of H₂O were required to produce 6.2 moles of H₃PO₄ (phosphoric acid).
Learn more about phosphoric acid here:
https://brainly.com/question/3700851
#SPJ1
a solution is prepared by adding 0.020 moles of na 2 hpo 4 and 0.010 moles of nah 2 po 4 to 100.0 ml of water. what is the ph of this solution? for h3 po 4 : ka1
The pH of the solution prepared by adding 0.020 moles of Na₂HPO₄ and 0.010 moles of NaH₂PO₄ to 100.0 ml of water is found to be 7.51.
A solution is prepared by adding 0.020 moles of Na₂HPO₄ and 0.010 moles of NaH₂PO₄ to 100.0 ml of water.
The total H⁺ concentration of the solution will be given as,
H⁺= √(Ka₁C₁)+(Ka₂C₂)
C₁ and C₂ are the concentration of the two acids. The Ka₁ and Ka₂ are the standard values of the solution. Putting all the values in the above mentioned formula we will get the pH of the solution to be 7.51.
To know more about pH of the solution, visit,
https://brainly.com/question/172153
#SPJ4
each of the following is one of the major classes of outdoor pollutants except (mark all that apply) group of answer choices carbon oxides suspended particles nitrogen oxides sulfur oxides smog
Smog is a result of the interaction between different pollutants, it does not belong to the major classes of outdoor pollutants.
Let me briefly explain each major class of outdoor pollutant:
1. Carbon oxides: This group includes carbon monoxide (CO) and carbon dioxide (CO2). Carbon monoxide is a toxic gas produced by the incomplete combustion of fuels, while carbon dioxide is a greenhouse gas released from various human activities like the burning of fossil fuels.
2. Suspended particles: These are tiny solid or liquid particles suspended in the air, also known as particulate matter (PM). They can be emitted from various sources like construction activities, vehicle emissions, and industrial processes. Suspended particles can cause respiratory issues and other health problems.
3. Nitrogen oxides: This group includes nitrogen dioxide (NO2) and nitric oxide (NO), which are mainly emitted from vehicle exhausts and industrial processes. Nitrogen oxides contribute to the formation of smog, acid rain, and can cause respiratory problems.
4. Sulfur oxides: Sulfur dioxide (SO2) is the primary sulfur oxide, and it is released from burning fossil fuels, especially coal and oil, and from industrial processes. Sulfur oxides contribute to the formation of acid rain and can also cause respiratory problems.
for more questions on Smog :
https://brainly.com/question/2540988
#SPJ11
How many grams of O2 are required to react with 15.6 moles of CO2?
Answer: 499.2g of O2
Explanation:CO2 + O2 ---> CO2 +H20
From the equation, we know 1 mole of oxygen requires 1 mole of CO2 to react completely.
Therefore it is sure that 15.6 mole of CO2 requires 15.6 moles of O2
To convert moles of O2 to grams, we need to use the molar mass of O2
i.e. 32.00g/mol
the mass of O2 required is
15.6 moles *32.00 g/mol = 499.2g
In a titration, 25mL of 0.20M NaOH neutralize 5mL of HCI, what is the acid molarity?
The molarity of the HCl sample is 1.0 M.
In a titration, the moles of acid are equal to the moles of base at the equivalence point.
We can use this principle to calculate the molarity of the acid (HCl) from the volume and concentration of the base (NaOH) used in the titration.
First, we need to calculate the number of moles of NaOH used in the titration:
moles of NaOH = M x V = 0.20 M x 0.025 L = 0.005 mol
Since NaOH and HCl react in a 1:1 molar ratio, the number of moles of HCl present in the sample is also 0.005 mol.
Now we can calculate the molarity of HCl using the number of moles and the volume of the HCl sample used in the titration:
molarity of HCl = moles of HCl / volume of HCl sample
molarity of HCl = 0.005 mol / 0.005 L
molarity of HCl = 1.0 M
For more question on molarity click on
https://brainly.com/question/14469428
#SPJ11
If the He in Problem 3 takes 20 sec to effuse, how long will NH3 take?
Why is it important for ocean to have various regions
Answer:
Explanation:
The ocean is a huge body of salt water that covers about 71 percent of Earth’s surface. The planet has one global ocean, though oceanographers and the countries of the world have traditionally divided it into four distinct regions: the Pacific, Atlantic, Indian, and Arctic oceans. Beginning in the 20th century, some oceanographers labeled the seas around Antarctica the Southern Ocean, and in 2021 National Geographic officially recognized this fifth ocean.
An estimated 97 percent of the world’s water is found in the ocean. Because of this, the ocean has a considerable impact on weather, temperature, and the food supply of humans and other organisms. Despite its size and impact on the lives of every organism on Earth, the ocean remains a mystery. More than 80 percent of the ocean has never been mapped, explored, or even seen by humans. A far greater percentage of the surfaces of the moon and the planet Mars has been mapped and studied than of our own ocean floor.
Although there is much more to learn, oceanographers have already made some amazing discoveries. For example, we know that the ocean contains towering mountain ranges and deep canyons, known as trenches, just like those on land. The peak of the world’s tallest mountain—Mount Everest in the Himalayas, measuring 8.84 kilometers (5.49 miles) high—would not even break the surface of the water if it was placed in the Pacific Ocean’s Mariana Trench or Philippine Trench, two of the deepest parts of the ocean.