Answer:
it just is
Explanation:
implement your physical security plan by dragging the correct items from the shelf onto the various locations in the building. as you drag the items from the shelf, the possible drop locations are highlighted. to implement your plan, you must:
To implement your physical security plan, you should:
1. Drag the correct items from the shelf
2. Drop them onto the highlighted locations in the building.
How to implement physical security planTo implement your physical security plan, You need to do the following steps:
First, drag the items from the shelf onto the various locations in the building. You should note that the possible drop locations are highlighted, which makes it easier for you to ensure that you are putting the items in the correct place.
Next, you should review your plan to make sure that you have included all necessary items and that they are placed in the right location. This is essential to ensure that the security plan is effective and that all areas of the building are protected.
Finally, you should test your security plan to make sure that it is working correctly.
You should run tests to see how well the plan works and make adjustments as necessary. This will help you to identify any potential vulnerabilities or weak points in your security plan and address them accordingly.
Learn more about physical security at
https://brainly.com/question/14718352
#SPJ11
which security control is most helpful in protecting against eavesdropping on wide area network (wan) transmissions?
The security control that is most helpful in protecting against eavesdropping on wide area network (WAN) transmissions is encryption. It is critical to ensure the security of data during these transmissions, which is why encryption is an essential security control.
What is encryption?Encryption is the process of converting data into an unintelligible code to safeguard the information's confidentiality and ensure that it can only be viewed by authorized persons. It is a means of safeguarding data from being accessed by unauthorized individuals. To protect data from eavesdropping, encryption is one of the most reliable security controls.What is eavesdropping?Eavesdropping is the act of secretly listening to or intercepting private communications without authorization. It's a malicious attempt to gain access to the contents of someone's message. Eavesdropping on WAN transmissions is a major concern, and encryption is used to protect against it.Wide area network (WAN) transmissions refer to data transfer between two or more remote locations over a network.
Learn more about security control here:
https://brainly.com/question/28261273
#SPJ11
why is selecting computer hardware and software for the organization an important management decision? what management, organization, and technology issues should be considered when selecting computer hardware and software?
Selecting computer hardware and software for an organization is an important management decision because it impacts the efficiency, productivity, and overall success of the organization.
The right technology can streamline processes, reduce costs, and enable growth.
When selecting computer hardware and software, management should consider:
1. Organization requirements: Determine the specific needs of the organization, such as processing power, storage capacity, and software functionality.
2. Compatibility: Ensure that the hardware and software are compatible with existing systems and can be easily integrated into the organization's workflow.
3. Scalability: Choose technology that can grow with the organization and adapt to future needs.
4. Cost-effectiveness: Consider the initial costs, as well as long-term costs, such as maintenance, upgrades, and support.
5. Security: Select hardware and software with strong security features to protect sensitive data and reduce the risk of cyberattacks.
6. User-friendliness: Opt for technology that is easy to use and train employees on, to improve efficiency and reduce downtime.
7. Vendor reliability: Research the reputation and support offered by hardware and software vendors to ensure a reliable partnership.
Considering these management, organization, and technology issues will help make informed decisions and select the most suitable computer hardware and software for the organization.
learn more about computer here:
https://brainly.com/question/15707178
#SPJ4
The order of magnitude in the state of the art data volume, computing power, and network speed for a typical big data scientific application is:
a. 10M Bytes, 100 Mflop/s, & 10 Mb/s, respectively.
b. 1G Bytes, 10Tflop/s, & 1Gb/s, respectively
c. 10TBytes, 100 flop/s, & 100 Gb/s, respectively
d. 10YBytes, 1Eflop/s, & 1Pb/s, respectively
The order of magnitude in the state of the art data volume, computing power, and network speed for a typical big data scientific application is:
b. 1G Bytes, 10Tflop/s, & 1Gb/s, respectively
This is because big data scientific applications typically involve processing large datasets that can be in the order of gigabytes or terabytes, and require high computing power in the order of teraflops or more to process the data efficiently. Additionally, the data is often distributed across multiple systems, requiring high-speed networks to transfer the data between nodes. Option (b) represents the closest order of magnitude for these parameters, making it the correct answer.
Learn more about computing power here:
https://brainly.com/question/31100978
#SPJ11
write a query which lists the first name and last name of subjects who at least completed one of the surveys and sorted the results by last name in ascending order.
This query selects the first_name and last_name columns from the subjects table where the survey_completed value is 1, and orders the results by last_name in ascending order.
To write a query that lists the first name and last name of subjects who have completed at least one of the surveys, and sort the results by last name in ascending order, follow these steps:
1. Identify the table containing the relevant information (e.g., subjects, surveys, survey_responses).
2. Determine which columns contain the required data (e.g., first_name, last_name, survey_completed).
3. Write a SELECT statement to retrieve the required data.
4. Use a WHERE clause to filter the results based on the completion of at least one survey.
5. Use an ORDER BY clause to sort the results by last name in ascending order.
Assuming your table is named "subjects" and the column "survey_completed" has a value of 1 for completed surveys, your query would look like this:
```sql
SELECT first_name, last_name
FROM subjects
WHERE survey_completed = 1
ORDER BY last_name ASC;
```
Learn more about query: brainly.com/question/30622425
#SPJ11
polymorphism enables you to: group of answer choices hide information from the user program in the specific absorb attributes and behavior from previous classes program in the general
Polymorphism enables you to program in the general, meaning you can write code that works with objects of multiple classes, as long as they share a common interface or parent class. So, option D is correct.
Polymorphism enables you to program in the general, by creating code that can work with objects of different classes, and still achieve the desired result. This means that you can create a single method or function that can handle multiple object types, as long as they share a common interface or parent class. This provides a high degree of flexibility and extensibility, as new classes can be easily added and integrated into the existing codebase. Polymorphism can also be used to absorb attributes and behavior from previous classes, through inheritance, and to hide information from the user, by encapsulating data and only exposing necessary information through public methods. Overall, polymorphism is a powerful programming concept that enables efficient, modular, and scalable code.
learn more about Polymorphism here:
https://brainly.com/question/29850207
#SPJ4
The actual question is:
Polymorphism enables you to: group of answer choices
A) hide information from the user
B) program in the specific
C) absorb attributes and behavior from previous classes
D) program in the general
what is the difference between a qubit and a classical bit? in what sense does a qubit encode an infinite amount of information? in what sense can at most one classical bit's worth of information be extracted from a qubit?
The qubit is a two-state quantum-mechanical system, whereas the classical bit is a two-state binary system. The two states of a qubit are represented by |0⟩ and |1⟩. The two states of a classical bit are represented by 0 and 1. A qubit can encode an infinite amount of information by superposition and entanglement.
Superposition: In quantum computing, a qubit can exist in multiple states simultaneously, meaning that the qubit can represent 0 and 1 simultaneously. This allows for a much greater amount of information to be encoded in the qubit than in the classical bit.
Entanglement: Entanglement is a quantum-mechanical phenomenon where two or more particles can become correlated in such a way that the state of one particle can instantly affect the state of the other particle, even if the two particles are separated by large distances. This allows for information to be transmitted faster than the speed of light.
One classical bit's worth of information can be extracted from a qubit using the process of measurement. Measurement is the process of determining the state of a qubit. When a qubit is measured, it collapses into one of two states, |0⟩ or |1⟩, with a certain probability depending on its initial state. Therefore, only one classical bit's worth of information can be extracted from a qubit using measurement.
You can learn more about qubit at: brainly.com/question/28096910
#SPJ11
your company needs to connect many end hosts to a switch which is in a wiring cabinet on the same office floor as the hosts. what kind of cable should they use?
For connecting many end hosts to a switch which is in a wiring cabinet on the same office floor as the hosts, the company should use an Ethernet cable. Ethernet cable is also known as RJ-45 because it has an 8-pin connector with eight visible and smaller connectors inside it.
What is a wiring cabinet?A wiring cabinet is a cabinet in which cables and electronic equipment are housed. Wiring cabinets are typically seen in telecommunications, home networking, and office networking systems. They are usually positioned near the edge of a room, and the length of the cabling used to connect them is determined by the room's size.A switch is a network device that directs data packets between devices on a network. It establishes a connection between the source and the destination devices by opening and closing communication channels. A switch's connections may be made using copper or fiber-optic cabling, both of which can support Gigabit Ethernet speeds.Therefore, Ethernet cable is used for connecting many end hosts to a switch that is in a wiring cabinet on the same office floor as the hosts. Ethernet cables are networking cables that link one device to another. They transmit data from the Internet to your computer, television, gaming system, or other wired network device. Ethernet cable is also known as RJ-45 because it has an 8-pin connector with eight visible and smaller connectors inside it.
Learn more about wiring cabinet here:
https://brainly.com/question/30562560
#SPJ11
network address translation (nat) is an internet engineering task force (ietf) standard used to allow multiple computers on a private network (using private address ranges such as 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16) to share a single, globally routable ipv4 address.?
The given statement is true. Network address translation (NAT) is an internet engineering task force (IETF).
standard used to allow multiple computers on a private network (using private address ranges such as 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16) to share a single, globally routable IPv4 address.What is Network address translation (NAT)?Network Address Translation (NAT) is a method for assigning a public IP address to a device or computer that is behind a router. NAT is needed when your ISP only gives you a single public IP address, but you have several devices or computers in your home that you want to use on the internet. NAT takes care of translating the private IP addresses assigned to your devices and computers into a single public IP address that is used on the internet. This method is commonly used by households or small businesses with multiple computers or devices that use the internet simultaneously.
learn more about Network here:
https://brainly.com/question/13102717
#SPJ4
describe the possible problems resulting from the limitations in the resources in a computer system.
Performance degradation,Data loss,Security issues.
Describe the possible problems resulting from the limitations?
A computer system's limitations in resources can cause a variety of problems. The following are some of the potential problems that may arise:
Performance degradation:
When a system is low on resources, it may begin to slow down or become unresponsive. Programs may take longer to load, and simple tasks may take longer to complete.
Program crashes: Programs may become unstable and crash more frequently if there are insufficient system resources. This may cause data loss, and the program may be unable to recover from the crash.
Data loss:
If a program crashes, any data that was not saved may be lost. If the system runs out of memory or storage, data may be lost. This may result in critical files becoming inaccessible.
System errors: When a system lacks resources, it may generate error messages. These messages can be vague and difficult to interpret, making troubleshooting more difficult. Some errors may cause the system to stop working entirely.
Security issues:
When a system lacks resources, it may become more vulnerable to security threats. For example, an attacker could exploit a vulnerability in a program that has crashed and is not functioning correctly. Alternatively, the system may not have the resources to run security software, leaving it unprotected.
Learn more about troubleshooting.
brainly.com/question/30048504
#SPJ11
mrs. polly thinks one of her students has downloaded some software that she believes will harm the school computers. what type of software does mrs. polly think was downloaded?
As per the question, "Mrs. Polly thinks one of her students has downloaded some software that she believes will harm the school computers. What type of software does Mrs. Polly think was downloaded?" Mrs. Polly thinks that malicious software was downloaded that can harm school computers.
Malware is a type of software that is designed to damage or disrupt computer systems. Malware is also known as malicious software. It is software that is designed to harm a computer system, network, or mobile device. It can be introduced to a computer system in several ways, such as through emails, instant messages, or downloads from the internet.There are several types of malware that can harm a computer system. Some common types of malware are as follows:Viruses Worms Trojan horses Ransomware Spyware Adware Botnets Rootkits Keyloggers Backdoors. Mrs. Polly thinks that one of her students has downloaded a type of malware that can harm school computers. She may have noticed suspicious behavior on one of the computers, such as slower performance or strange pop-up messages, which indicates that malware may be present. She should investigate the matter further and take steps to remove the malware from the computer before it can cause any further damage.For such more question on Malware
https://brainly.com/question/399317
#SPJ11
can u give me 3 principle of design and explain and write with paragraph?
Answer:
There are twelve basic principles of design: contrast, balance, emphasis, proportion, hierarchy, repetition, rhythm, pattern, white space, movement, variety, and unity.
how is the proliferation of mobile devices that are locally powerful, use apps instead of full-fledged applications
The proliferation of mobile devices that are locally powerful is increasingly common. These devices are known for their ability to use apps instead of full-fledged applications.
These mobile devices are becoming more and more popular because they offer a range of benefits over traditional desktop and laptop computers. For starters, mobile devices are far more portable than traditional computers. This makes them ideal for people who are always on the move, such as students, businesspeople, and anyone else who needs to be able to work on the go.Mobile devices are also great because they can run a wide range of applications. These applications can be downloaded and installed in seconds, giving users access to a wide range of tools and utilities that they can use to improve their productivity and stay connected with others. Mobile devices are also great for people who want to stay connected with others. They can be used to send and receive emails, browse the web, and access social media platforms like Faceb##k and T#itter. Overall, the proliferation of mobile devices that use apps instead of full-fledged applications is a positive development. These devices are easy to use, highly portable, and offer a wide range of benefits over traditional computers.
Learn more about applications here:
https://brainly.com/question/31164894
#SPJ11
5 Select the correct answer. What type of language is Objective-C? O A. command language OB. markup language C. object-oriented language D. logic language Reset Nex
For Apple's macOS and iOS operating systems, Objective-C is largely utilised as an object-oriented programming language.
What does "object-oriented language" mean?OOPs, or object-oriented programming, is essentially a methodology for creating software. It was created to address the reusability and maintainability issues with procedural programming techniques. OOPs is a technique for creating applications that use classes and objects.
Why is an object-oriented language called that?An entity that exists in the real world is referred to as an object in the dictionary, and the word "oriented" denotes "interested in a certain kind of thing or entity." OOP, often known as object-oriented programming, is a programming pattern that is centred around objects or entities.
To know more about software visit:-
https://brainly.com/question/985406
#SPJ9
An element in a 2D list is a ______
Answer:A two dimensional array I think..
Explanation:
ifs it isn’t right sorry <\3
An element in a 2D list is a two dimensional array as when it is using for loops to iterate through a 2D list, the outer loop accesses the rows.
What is the outer loop?The outer loop iterates over each row of the 2D list, while the inner loop iterates over each element in that row. This allows you to access and manipulate each element of the 2D list one at a time, making it easier to perform operations or calculations on the data in the list.
By iterating through the rows first, you can ensure that each element of the list is accessed in the correct order and that all data is processed or analyzed correctly.
Therefore, An element in a 2D list is a two dimensional array as when it is using for loops to iterate through a 2D list, the outer loop accesses the rows.
Learn more about outer loop on:
https://brainly.com/question/27994811
#SPJ2
your windows computer can be brought to the state it was in when it came to you from the factory with a utility called
The utility to bring your Windows computer back to the state it was in when it came from the factory is called "System Restore" or the "Reset this PC" feature.
A Windows computer can be brought back to the state it was in when it came to you from the factory with a utility called System Restore. What is System Restore? System Restore is a program in Microsoft Windows that enables users to restore their computers to a prior state. System restore points are created before important events like software updates and app installations on a computer. System restore returns the PC to the condition it was in when the restore point was created. It's possible that a restore point was created before your computer's problem began, allowing you to return to that state. System Restore is also helpful in repairing Windows when it doesn't start normally. However, it's critical to note that any installed apps and updates will be removed if you use this option. System Restore does not erase any files from the computer. Hence, the answer is System Restore.
visit here to learn more about Windows:
https://brainly.com/question/28525121
#SPJ11
what do you call the explanation the assignment that gives its parameters (such as word or page count, types of source, etc.), and provides the criteria for grading?
The explanation of an assignment that gives its parameters and provides the criteria for grading is typically called the assignment rubric.
What is a rubric ?A rubric is a document that outlines the expectations and criteria for a particular assignment. It typically includes information such as the word or page count, types of sources that should be used, and other parameters that will be used to evaluate the assignment.
The rubric provides a clear framework for students to understand what is expected of them and how their work will be evaluated. It also helps ensure that grading is consistent and fair, as each assignment will be evaluated according to the same criteria.
Find out more on rubrics at https://brainly.com/question/8536552
#SPJ1
how are entity constraints implemented? group of answer choices key attributes domain constraints foreign keys data types of attributes
Entity constraints are implemented using key attributes, domain constraints, foreign keys, and data types of attributes.
About entity constraintEntity constraints are implemented in several ways, which are explained below:
1. Key attributes: Every entity can have one or more attributes that are designated as key attributes. Key attributes have unique values for each entity instance, and they can be used to specify entity integrity constraints.
2. Domain constraints: Domain constraints define the permissible values for an attribute.
3. Foreign keys: A foreign key is an attribute that corresponds to the primary key of another entity.
4. Data types of attributes: Data types of attributes should be selected so that they can accurately represent the data being stored. They can also help to enforce entity constraints.
Thus, entity constraints can be implemented using key attributes, domain constraints, foreign keys, and data types of attributes.
Learn more about entity constraint at
https://brainly.com/question/31168706
#SPJ11
write the output of the following program
{
int a=10,b=5,c=a+b
if (a!=c)
Cout<<"ABCD";
else
if(a==b)
Cout<<"JKLM";
else
Cout"OPQR";
return 0;
}
The output of the program is "JKLM".
The output of the program would be "JKLM". The program first initializes two integer variables, a and b, to 10 and 5 respectively. It then adds the two variables together and assigns the result to variable c.
The program then checks if a is not equal to c using the "!=" operator. Since 10+5=15 and a is equal to 10, a is not equal to c. Therefore, the program enters the first "if" statement and prints "ABCD" using the "cout" statement.
However, since there is an "else if" statement in the program, the program checks the condition in the "else if" statement as well. In this case, a is not equal to b (since a is 10 and b is 5), so the program skips this "else if" statement.
The program then enters the "else" statement, which means that neither the "if" nor the "else if" condition was met. Therefore, the program prints "JKLM" using the "cout" statement in the "else" block.
To learn more about Program
https://brainly.com/question/23275071
#SPJ11
uma has just watched the video on creating pivot tables and she is excited that you don't need to highlight the whole data range to create a pivot table, all you need to do is make sure that you are clicked on one of the cells in the data range. has uma understood the topic well?
Yes, Uma has understood the topic well. It is true that to create a pivot table, it is not necessary to highlight the entire data range. All you have to do is click on any cell within the data range, and then go to the "Insert" tab and select "Pivot Table" to create a pivot table.
A pivot table is a tool that allows users to summarize large data sets into more manageable formats. It is used to aggregate, sort, count, and total the data contained in one or more columns. Pivot tables are interactive, meaning that they can be adjusted and customized to meet the needs of the user.Pivot tables are useful because they allow users to see patterns and trends in large data sets quickly. They are commonly used in business and finance, but they can be used in any situation where large amounts of data need to be summarized and analyzed.
Learn more about Pivot Table here:
https://brainly.com/question/30543245
#SPJ11
consider the usage of critical word first and early restart on l2 cache misses. assume a 1 mb l2 cache with 64-byte blocks and a refill path that is 16 bytes wide. assume that the l2 can be written with 16 bytes every 4 processor cycles, the time to receive the first 16 byte block from the memory controller is 120 cycles, each additional 16 byte block from main memory requires 16 cycles, and data can be bypassed directly into the read port of the l2 cache. ignore any cycles to transfer the miss request to the l2 cache and the requested data to the l1 cache. how many cycles would it take to service an l2 cache miss with and without critical word first and early restart?
Critical word first and early restart on L2 cache misses:With critical word first and early restart on L2 cache misses, it would take 240 cycles to service a miss. It would take 184 cycles to service a miss without critical word first and early restart.
In 120 cycles, the first block of data can be transferred to the L2 cache. The refill path is 16 bytes wide and the L2 cache can write 16 bytes every four processor cycles. Therefore, it takes 16 cycles to transfer each additional block of data. The L2 cache has 1MB of memory, which consists of 64-byte blocks. Therefore, it will take 1MB/64B=16,384 blocks to fill the cache. With critical word first and early restart on L2 cache misses, the L2 cache uses critical word first and early restart techniques. As a result, the data can be bypassed directly into the read port of the L2 cache. As a result, when a critical word is detected, the data is delivered to the processor without waiting for the entire block to be read. With critical word first and early restart on L2 cache misses, a miss would take 240 cycles to service.Each 64-byte block of memory takes 16 cycles to transfer. To transfer all of the blocks to fill the cache, 16,384 x 16 = 262,144 cycles would be required. After the first block is transferred, 15 blocks are needed to fill the refill path. Therefore, it takes 15 x 16 = 240 cycles to service a miss.Without critical word first and early restart on L2 cache misses, the entire block must be read before it can be delivered to the processor. As a result, all 64 bytes must be read before the critical word can be delivered. Because the refill path is only 16 bytes wide, it takes four cycles to deliver a 64-byte block of data to the L2 cache. As a result, the time required to read the entire block is 64 x 4 = 256 cycles. After the first block is transferred, it takes 15 blocks to fill the refill path. Therefore, the time required to fill the refill path is 15 x 4 = 60 cycles. It takes 120 cycles to receive the first 16-byte block from the memory controller. Therefore, it takes a total of 120 + 256 + 60 = 436 cycles to service a miss without critical word first and early restart.
To service an L2 cache miss with critical word first and early restart, follow these steps:
1. Wait for the first 16-byte block containing the critical word to arrive from the memory controller (120 cycles).
2. Bypass the critical word directly into the read port of the L2 cache.
3. Transfer the remaining 64 - 16 = 48 bytes in 4-byte chunks. Each chunk takes 16 cycles, so transferring the remaining bytes takes 3 * 16 = 48 cycles.
Total cycles with critical word first and early restart: 120 + 48 = 168 cycles.
To service an L2 cache miss without critical word first and early restart:
1. Wait for the entire 64-byte block to arrive from the memory controller. The first 16-byte block takes 120 cycles, and the remaining 3 blocks take 16 cycles each, for a total of 120 + (3 * 16) = 120 + 48 = 168 cycles.
Total cycles without critical word first and early restart: 168 cycles.
In this scenario, the number of cycles to service an L2 cache miss is the same with and without critical word first and early restart, which is 168 cycles.
To know more about processor, click the below link
https://brainly.com/question/28902482
#SPJ11
what is the output if a user is in the websrus git project directory, changes to a directory called runapp with a .git subdirectory, and executes git log?
Executing the git log command in the runapp directory will provide a detailed record of all the commits made in that directory,
If a user is in the websrus git project directory, changes to a directory called runapp with a .git subdirectory, and executes git log, the output will show the commit history of the runapp directory.
The git log command displays a list of all the commits made in the current branch.
The output will contain the commit message, the author, the date and time of the commit, and a unique commit hash for each commit. The output may also include information on merge commits, which show where multiple branches were merged together.
This information is useful for developers who need to track changes made to a project, as it allows them to see the history of modifications, who made them, and when they were made.
By analyzing the commit history, developers can identify bugs, troubleshoot issues, and collaborate with other team members to improve the project.
To learn more about : log
https://brainly.com/question/30251121
#SPJ11
parker runs the net start svsvc command at a command prompt to scan volume errors. he finds a corrupted spot on a volume. how can parker directly go to the corrupted spot identified by the spot verifier service?
To directly go to the corrupted spot identified by the Spot Verifier service, Parker should use the CHKDSK command with the appropriate parameters to target the specific volume and spot.
The steps to do this are as follows:
Open the Command Prompt as an administrator by right-clicking on the Windows Start menu and selecting Command Prompt (Admin).Type the command chkdsk [drive letter]: /f and press Enter. For example, if the corrupted volume is the D: drive, the command would be chkdsk D: /f.Wait for the process to complete. Depending on the size of the volume, this can take several minutes or longer.After the process is complete, Parker can view the Chkdsk results in the Event Viewer. This will show the specific errors and corrupted spots that were identified by the Spot Verifier Service. Parker can then navigate to these locations to address any issues that were found.
Learn more about CHKDSK command: https://brainly.com/question/14666638
#SPJ11
how does linear search work? linear search traverses an array until the desired value is found, or until the end of the array. linear search traverses an array from the last value to the first value until the desired value is found. linear search uses a while loop to traverse an array for the desired value, or until the end of the array. linear search searches for desired values by searching the the next highest value in an array, and seeing if that is the desired value.
Linear search is a simple search algorithm that works by traversing an array from the first element to the last element or until the desired value is found.
Explain the working of Linear Search.The linear search algorithm starts at the beginning of the array and compares the first element to the desired value. If the first element is the desired value, the search is complete. If the first element is not the desired value, the algorithm moves on to the second element and compares it to the desired value. This process continues until the desired value is found or until the end of the array is reached.
If the desired value is not found in the array, the linear search algorithm will return a value indicating that the desired value was not found.
Linear search can be used on unsorted and sorted arrays, but it is most efficient on small arrays or when the desired value is close to the beginning of the array. In general, for larger arrays or when performance is critical, other search algorithms such as binary search or hash table lookups are preferred.
To learn more about Linear search, visit:
https://brainly.com/question/15178888
#SPJ1
which command will change the working directory version of newmod.c to the version that was part of the commit with sha 87ff65a?
To change the working directory version of new mod.c to the version that was part of the commit with sha 87ff65a, the command that can be used is:
git checkout 87ff65a -- new mod.c
This command checks out the version of new mod.c that was present in the commit with the SHA 87ff65a.
The "git checkout" command is used to switch branches or restore files in a repository. The "--" flag is used to indicate that the subsequent argument is the path to the file being checked out.
In summary, to change the working directory version of new mod.c to the version that was part of the commit with sha 87ff65a, use the command "git checkout 87ff65a -- new mod.c".
For such more question on repository
https://brainly.com/question/30454137
#SPJ11
which nec article covers premises-powered optical fiber-based broadband communications systems that provide any combination of voice, video, data, and interactive services through an optical network terminal?
In NEC, Article 840 covers premises-powered optical fiber-based broadband communications systems that provide any combination of voice, video, data, and interactive services through an optical network terminal (ONT).
The National Electrical Code (NEC) is a regionally adoptable standard for the safe installation of electrical wiring and equipment in the United States. It is part of the National Fire Codes series that is published by the National Fire Protection Association (NFPA).
An optical network terminal (ONT) is a piece of customer premises equipment (CPE) that connects to an optical network that provides Ethernet services to end users. The ONT converts optical signals to electrical signals and vice versa. It offers a high-speed internet connection, as well as phone and video services.
You can learn more about National Electrical Code (NEC) at: brainly.com/question/30757813
#SPJ11
in a pretest loop, what should you include in the loop body to ensure that there is a way to enter the sentinel value after the loop body instructions are processed the first time?
A pretest loop is a type of loop that checks for the condition before executing any of the loop body instructions. The do-while loop is an example of a post-test loop because it first executes the loop body instructions before checking the condition.
The for loop, while loop and do-while loop are the three types of loops available in most programming languages. A sentinel value is a special value used in programming to indicate the end of input or processing. It's used to signal that the loop should stop and that the program should begin processing the input it has collected thus far. It's frequently used in conjunction with loops to gather input from a user or other source before processing it. The loop body of a pretest loop should include a way to enter the sentinel value after the first set of loop body instructions has been processed. This can be accomplished in a variety of ways, depending on the programming language and the specific requirements of the program. For example, in Python, you might use a while loop to read input from the user and check for the sentinel value, such as "quit" or "end", at the beginning of each iteration.
learn more about the pretest loop here:
https://brainly.com/question/29215267
#SPJ11
if client code is traversing a list by repeatedly using a get method and the underlying structure is a linked chain. the efficiency of traversal is:
If the client code is traversing a list by repeatedly using a get method and the underlying structure is a linked chain, the efficiency of traversal is O(n).A linked chain is a data structure that is implemented using nodes or objects in a computer program.
Each node includes two fields: a data field and a reference to the next node in the sequence. As a result, nodes are linked together in a chain, with each node pointing to the next one until the end of the chain is reached.What is traversal?In computer science, traversal refers to the process of visiting each element in a data structure, such as a tree or a linked list, in a specific order. This operation can be carried out in several ways, including depth-first traversal, breadth-first traversal, and others.A get method is a type of method in object-oriented programming that is used to retrieve or return the value of an client code instance variable. Get methods, often known as accessor methods, are typically used to retrieve data that is otherwise inaccessible due to encapsulation in object-oriented programming.
Learn more about client code here:
https://brainly.com/question/29308166
#SPJ11
So for example you need to login using a captive portal to access a WiFi network, can the administrators of the network see what user searches what?
Answer:
I think so
Explanation:
they can look at ips and match it to devices
explain how a binary search tree can be used as the implementation of the map adt. would this be a good choice for this implementation?
A binary search tree can be used as the implementation of the map ADT. Yes, this is a good choice for this implementation.
What is a binary search tree?A binary search tree is a kind of binary tree in which each node has at most two child nodes, commonly known as left and right child nodes. It has the following features:Each node has a unique key. The left subtree of a node contains only keys lesser than the node's key.The right subtree of a node contains only keys greater than the node's key.Both the left and right subtrees must be binary search trees themselves. We can use the binary search tree data structure as the basis for the map ADT implementation. As a result, for a given key, the tree structure maps keys to values. Since the tree maintains keys in sorted order, it's easy to find an element in the binary search tree. The data structure is frequently employed in search-based applications due to its efficiency.The map ADT can be implemented using a variety of data structures, including a binary search tree. It is appropriate to use a binary search tree for this purpose because it has all of the required functionality for the map ADT, such as insert, delete, search, and update functions. Furthermore, the binary search tree's time complexity for these operations is generally low. As a result, we may conclude that using a binary search tree as a map ADT implementation is a good decision.
learn more about binary search tree here:
https://brainly.com/question/12946457
#SPJ11