Write a two to four sentence conclusion statement explaining how the potential energy diagram is used to identify if the reaction is endothermic or exothermic, if heat was released or absorbed, and why the sign of enthalpy change was positive of negative. There should be a conclusion statement for each graph.
Answers
Answer:
The Heat of a reaction is given as the heat content/heat of formation/enthalpies of the products minus the heat content/heat of formation/enthalpies of the reactants. If the potential energy diagram has the product(s) having a higher potential energy than the reactant(s), then the reaction is an endothermic reaction (this is why the reaction absorbs heat from the surroundings to try to make up for the lack of potential energy of the reactants) and the sign on the enthalpy change is visibly positive since H(products) > H(reactants) If the potential energy diagram has the reactant(s) having a higher potential energy than the product(s), then the reaction is an exothermic reaction (this is why the reaction releases heat to the surroundings to try to take care of the higher potential energy of the reactants) and the sign on the enthalpy change is visibly negative since H(reactants) > H(products).
Explanation:
hope it helps:)
Related Questions
2. Which was the independent variable in the experiment below? *
3 points
A. Amount of light
B. Soil type
C. Temperature
D. Health of plant
Answers
Answer:
I think it is C. Temperature, sorry if wrong.
What is the apparent brightness of a star?
How bright it actually is
How bright it is compared to the sun
How bright it is from Earth
How bright it is from a certain distance
Answers
Answer:
it's bright where you can see it it's not that bright compared to the sun from Earth it's really not so bright
The vertical columns on the periodic table are known as:.
Answers
Answer:
groups
Explanation:
In chemistry, the vertical columns are known as groups and the horizontal columns are known as periods.
I need help with this ( look at the picture I put)
Answers
Answer:
12 H, 18 O, 6 C
Explanation:
[tex]6H_{2} O + 6CO_{2} -- > C_{6}H_{12} + 6O_{2}\\[/tex]
___________________
first, we'll fo the h on the first equation: [tex]6H_{2}[/tex]
multiply the 6 and 2 to get twelve.
in the second equation, we see that there is [tex]H_{12}[/tex]
so, in both there are 12 H.
__________________
Now we'll do O.
in the first equation we have [tex]6O + 6O_{2}[/tex]
so we have 6 + (6*2) or 6 + 12, which gives us 18
in the second equation we have [tex]O_{6} + 6O_{2}[/tex]
it's basically the same thing, just written differently, so we have 18.
__________________
Finally, C.
In the first equation, we have [tex]6C[/tex]
in the second [tex]C_{6}[/tex], again, same thing expressed differently.
both have 6 C.
In what organelle or membrane are triacylglycerols synthesized and fatty acids elongated?.
Answers
1 - In what organelle or membrane are triacylglycerols synthesized and fatty acids elongated?
A - Lysosomes
B - Peroxisome
C - Endoplasmic reticulum
D - Ribosomes
E - Nucleus
The answer is Endoplasmic reticulum
How much energy in Joules is required to convert 10 grams of ice at -10 °C to +10 °C water. s water = 4.18 joule/gram °C, sice = 2.09 joule/gram °C, Hfus 334joule/gram
Answers
Answer:
don't know just supporting u
Wind power was first used in the 1970s.
A. true
B. false
Answers
Answer:
B. false
Explanation:
Answer:
B (false)
Explanation:
Because, the earliest recorded evidence of wind energy being used dates to around 5000 BC in Egypt, where the sail was invented to catch the wind and propel boats along the River Nile
Which statement best describes how deflating a soccer ball is evidence of matter?
The ball changes shape from round to flat.
The ball increases size and shape.
The mass of the ball has increased.
The temperature outside the ball has changed.
HELP PLS WILL MARK BRAINLIEST
Answers
Please answer this
The compound CO2(s) sublimes readily at 25°C. Which properties are usually associated with a compound that undergoes this kind of change?
1. High vapor pressure and high intermolecular attractions
2. High vapor pressure and low intermolecular attractions
3. Low vapor pressure and high intermolecular attractions
4. Low vapor pressure and low intermolecular attractions
Answers
A solution contains 5. 120 moles of Li2SO3 with a molarity of 6. 750 M. What is the volume of this solution
Answers
Answer: 0.759 L
Explanation:
molarity = moles of solute / liters of solution
so, 6.750 = 5.120 / liters of solution
liters of solution = 5.120/6.750 = 0.759 L
Martin makes new cereal flavors for a major corporation. Which type of research tool would BEST help him to determine if people enjoy the new flavors?
Answers
Answer:
Surveys
Explanation:
Martin can make an interaction with people and take surveys to know whether people likes the new flavors.
What are surveys?Surveys are research techniques used to gather data from a designated group of respondents in order to learn more and acquire insights into a range of interesting topics. Depending on the methodology chosen and the objective of the study, they can be conducted in a variety of methods and serve a variety of objectives.
Direct questions to clients are the best approach to get information from them. Surveys are a good way to achieve it if you have a well-thought-out strategy.
Companies can use surveys to gather data to develop strategies and maintain the satisfaction of their employees and consumers while looking for solutions based on the results.
To find more on surveys, refer here:
https://brainly.com/question/29365625
#SPJ2
The lithosphere (crust) is broken into sections called ____, which float on top of the asthenosphere.
Answers
Answer: Tetonic plates
Explanation: just because
how do you prepare saturated solution NaCl at 40°c?
Answers
4. Compare and contrast the 2 reactions below and balance the reactions. Which reaction is
endothermic and which reaction is exothermic?
Answers
The first reaction is exothermic reaction because it release energy whereas the seocond equation is endothermic reaction due to absorption of energy.
Endothermic Reaction
The energy is absorbed from the surrounding environment in susch type of reaction. Energy is absorbed in the form of heat.
Exothermic ReactionThe energy is released from the reaction to its environment in this type of reaction. Energy is released as heat, electricity, light or sound.
Learn more about reaction here: https://brainly.com/question/26018275
07. 2
Explain why caesium is more reactive than sodium.
You should answer in terms of electrons.
Answers
For the reaction below , label each reactant as an electron pair acceptor or electron pair donor and as a Lewis acid or a Lewis base. AlCl 3 +Cl^ -; AlCl 4 ^ -
Answers
Since the reaction shown in the question is an acid - base reaction in the Lewis sense; the Lewis acid here is AlCl3 while the Lewis base here is Cl^- .
What is a Lewis acid?A Lewis acid is a substance that accepts electron pair while a Lewis base donates an electron pair.
Now consider the given reaction; AlCl3 +Cl^- ------> AlCl 4 ^-. The Lewis acid here is AlCl3 while the Lewis base here is Cl^- .
Learn more about acid - base reaction: https://brainly.com/question/14356798
as star luminosity increases what else increases? (check all that apply)
a) carbon
b) temperature
c) size
d) nitrogen
Answers
Answer:
C
Explanation:
As the size of a star increases, luminosity increases. If you think about it, a larger star has more surface area. That increased surface area allows more light and energy to be given off.
The pictures show different organisms. Which characteristic do all organisms share?
A- All organisms are made of cells.
B- All organisms have cells with cell walls.
C- All organisms have cells with a nucleus.
D- All organisms can make their own food.
Answers
gIAnswer: It b
Explanation:
A chemist combines 300 mL of a 0.3 M Na2SO4 solution with 200 mL of 0.4 M BaCl2 solution. How many grams of precipitate form
Answers
The mass of the precipitate, BaSO₄ obtained from the given reaction is 18.64 grams
How to determine the mole Na₂SO₄Volume of Na₂SO₄ = 300 mL = 300 / 1000 = 0.3 LMolarity of Na₂SO₄ = 0.3 MMole of Na₂SO₄ =?Mole = Molarity x Volume
Mole of Na₂SO₄ = 0.3 × 0.3
Mole of Na₂SO₄ = 0.09 mole
How to determine the mole of BaCl₂Volume of BaCl₂ = 200 mL = 200 / 1000 = 0.2 LMolarity of BaCl₂ = 0.4 MMole of BaCl₂ =?Mole = Molarity x Volume
Mole of BaCl₂ = 0.4 × 0.2
Mole of BaCl₂ = 0.08 mole
How to determine the limiting reactantBalanced equation
Na₂SO₄(aq) + BaCl₂(aq) —> BaSO₄(s) + 2NaCl(aq)
From the balanced equation above,
1 mole of BaCl₂ reacted with 1 mole of Na₂SO₄.
Therefore,
0.08 mole of BaCl₂ will also react with 0.08 mole of Na₂SO₄.
From the above illustration, we can see that only 0.08 mole of Na₂SO₄ out of 0.09 mole given is neede to react completely with 0.08 mole of BaCl₂.
Therefore, BaCl₂ is the limiting reactant
How to determine the mass of the precipitate (BaSO₄) formedBalanced equation
Na₂SO₄(aq) + BaCl₂(aq) —> BaSO₄(s) + 2NaCl(aq)
From the balanced equation above,
1 mole of BaCl₂ reacted to produce 1 mole of BaSO₄.
Therefore,
0.08 mole of BaCl₂ will also react to produce 0.08 mole of BaSO₄.
The mass of BaSO₄ can be obtained as follow
Mole of BaSO₄ = 0.08 mole Molar mass of BaSO₄ = 137 + 32 + (16×4) = 233 g/mol Mass of BaSO₄ =?Mass = mole × molar mass
Mass of BaSO₄ = 0.08 × 233
Mass of BaSO₄ = 18.64 g
Learn more about stoichiometry:
https://brainly.com/question/14735801
What type of substance reacts with limestone (caco3) and produces carbon dioxide gas? a neutral substance a base an acid both an acid and a base
Answers
The type of substance which reacts with limestone and produces carbon dioxide gas is an acid.
What is limestone?Limestone is a basic compound with a molecular formula CaCO₃ and it reacts with acid to produce carbon dioxide gas.
Reaction between the limestone and an acid known as hydrochloric acid to produce carbon dioxide gas, water molecule and calcium chloride salt as:
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
Hence required substance is an acid.
To know about limestone, visit the below link:
https://brainly.com/question/13723417
Answer:
c on edge
<3 hope this helps people.
Balancing _CH4+_CO2=_CCl4+_HCL
Answers
Explanation:
the equation is wrong, please make sure you typed it correctly. because there is no way methane and carbon dioxide can give carbon tetra chloride and hydrogen chloride gas. It's impossible, the reactants and products donot match. Re-write the equation correctly again
sodium chloride procedure
Answers
Answer: Dissolve approximately 3 mg of Sodium Chloride in 2 mL of water.
Add 0.4 mL of silver nitrate TS and acidify with diluted nitric acid.
the molar solubility of x2s in pure water us 0.0395
Answers
The Ksp shows the extent of dissolution of a solute in solution. The Ksp of the solution is 2.5 * 10^-4.
What is Ksp?The Ksp is an equilibrium constant that is usd to show the extent of solubility of a solute in solution.
The equation for the solution of X2S is;
X2S(s) ⇄2X^+(aq) + S^2-(aq)
Ksp = [2s]^2 [s]
Since s = 0.0395 M
Ksp = 4s^3
Ksp = 4[0.0395 ]^3
Ksp = 2.5 * 10^-4
Learn more about Ksp: https://brainly.com/question/27132799
Which beaker has the least thermal energy?
A. Beaker D
B. Beaker A
C. Beaker B
D. Beaker C
Answers
Answer:
________________________________
✏️ QUESTION:which doctor has the least thermal energy?
A. beaker D
B. beaker A
C.beaker B.
D. beaker C
________________________________
✏️ ANSWER:A. beaker D..
________________________________
#LetsEarthBreath
Question 3 someone help me please
Answers
Answer:
False ....
first of all gas is not the desirable product of combustion
Which of these elements is the odd one out? Li Na Mg K Rb Cs
Answers
use the Gizmo to create a path for carbon that begins and ends in the atmosphere. Fill in the steps in the path below. Then, label each location with the system it represents. Finally, summarize very briefly how the carbon atom got to that location.
Answers
Volcanoes, burning fossil fuels, and respiration of organisms.
Explanation:
Volcanoes, burning fossil fuels, and respiration of organisms releases carbondioxide that forms atmospheric carbondioxide. The carbon enters in the biosphere through the process of photosynthesis. In plants, carbondioxide enters in the plant body which is used as a reactant from which food is prepared. The carbon present in the plant body in the form of glucose which can be transferred into another organism due to feeding of organisms. The organism released this carbon in the form of carbondioxide when the eaten food is broken down for the release of energy. In that way, carbon moves from biosphere to the atmosphere whereas Volcanoes and burning fossil fuels releases carbon in the atmosphere, in this way carbon moves from lithosphere to atmosphere.
The pH of a solution prepared by dissolving 0. 350 mol of solid methylamine hydrochloride (CH3NH3Cl) in 1. 00 L of 1. 10 M methylamine (CH3NH2) is ________. The Kb for methylamine is 4. 40 ⋅ 10-4. (Assume the final volume is 1. 00 L. )
Answers
For the pH of a solution prepared by dissolving 0. 350 mol of solid methylamine hydrochloride, the pH is mathematically given as
pH = 11.14
What is the pH value of a solution prepared by dissolving 0. 350 mol ?Generally, the equation for the pKb is mathematically given as
pKb = -logKb
Therefore
pKb of CH3NH2 = -log(4.40×10-4)
pKb of CH3NH2= 3.36
Hence
pKa= 14 - pKb
pKa= 14 - 3.36
pKa= 10.64
In conclusion, using
pH = pKa + log([A-]/[HA])
pH = 10.64 + log(1.10M/0.350M)
pH = 11.14
Read more about pH value
https://brainly.com/question/1584537
A chemical reaction that has the general formula of ab c → cb a is best classified as a reaction.
Answers
Answer:
single replacement
Explanation:
Single replacement is when the molecules switch with each another
for example:
Zn + CuCl₂→ZnCl₂ +Cu
Answer:
replacement
Explanation:
When balanced, which equation would have the coefficient 3 in front of any of the reactants? zn hcl zncl2 h2 h2so4 b(oh)3 b2(so4)3 h2o fe agno3 fe(no3)2 ag c2h4o2 o2 co2 h2o
Answers
The balanced equation which have the coefficient 3 in front of any of the reactants is 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O.
What are balanced equation?Those chemical equations in which number of each atoms pesent in reactant side as well as on product side is always equal to each other.
Let us consider the balanced equations for the given chemical reactions are:
Zn + HCl → ZnCl₂ + H₂Balanced form of the above reaction will be written as Zn+2HCl → ZnCl₂+H₂ where all atoms are present in equal quantity.
H₂SO₄ + B(OH)₃ → B₂(SO₄)₃ + H₂OBalanced form of the given reaction will be written as 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O, where coefficient 3 is present in before sulphuric acid and water molecule.
Fe + AgNO₃ → Fe(NO₃)₂ + AgBalanced form of above reation will be written as Fe+ 2AgNO₃ → Fe(NO₃)₂ + 2Ag.
C₂H₄O₂ + O₂ → CO₂ + H₂OBalnced form of above chemical equation will be represented as C₂H₄O₂ + 2O₂ → 2CO₂ + 2H₂O, and coefficient 3 is not used any where.
The quation which have the coefficient 3 is 3H₂SO₄ + 2B(OH)₃ → B₂(SO₄)₃ + 3H₂O.
To know more about balancing equations, visit the below link:
https://brainly.com/question/26227625
Answer: It's 3. H2SO4 + B(OH)3 B2(SO4)3 + H2O