(x - 3)(x + 4) What is the horizontal distance between the two x-intercepts?

0.18x + 4 - 0.40x = 2

-0.22x = -2

x = 9.09

Therefore, the pharmacist should mix 9.09 liters of 18% alcohol solution and 0.91 liters of 40% alcohol solution to make 10 liters of 20% alcohol solution.

[tex]x=\textit{Liters of solution at 18\%}\\\\ ~~~~~~ 18\%~of~x\implies \cfrac{18}{100}(x)\implies 0.18 (x) \\\\\\ y=\textit{Liters of solution at 40\%}\\\\ ~~~~~~ 40\%~of~y\implies \cfrac{40}{100}(y)\implies 0.4 (y) \\\\\\ \textit{10 Liters of solution at 20\%}\\\\ ~~~~~~ 20\%~of~10\implies \cfrac{20}{100}(10)\implies 2 \\\\[-0.35em] ~\dotfill[/tex]

[tex]\begin{array}{lcccl} &\stackrel{Liters}{quantity}&\stackrel{\textit{\% of Liters that is}}{\textit{alcohol only}}&\stackrel{\textit{Liters of}}{\textit{alcohol only}}\\ \cline{2-4}&\\ \textit{1st Sol'n}&x&0.18&0.18x\\ \textit{2nd Sol'n}&y&0.4&0.4y\\ \cline{2-4}&\\ mixture&10&0.2&2 \end{array}~\hfill \begin{cases} x + y = 10\\\\ 0.18x+0.4y=2 \end{cases} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\stackrel{\textit{using the 1st equation}}{x+y=10\implies y=10-x} \\\\\\ \stackrel{\textit{substituting on the 2nd equation from above}}{0.18x+0.4(10-x)=2}\implies 0.18x+4-0.40x=2 \\\\\\ -0.22x+4=2\implies -0.22x=-2\implies x=\cfrac{-2}{-0.22}\implies \boxed{x\approx 9.09} \\\\\\ \stackrel{\textit{since we know that}}{y=10-x}\implies y\approx 10-9.09\implies \boxed{y\approx 0.91}[/tex]

Answer: 24 I think if not my bad

Step-by-step explanation:

If I recall right you just have to count them

Answer:

A circle has 360 degrees, so 5/6 of the circle can be found by multiplying 360 by 5/6:

5/6 of 360 = (5/6) × 360 = 300

Therefore, the angle measures of 5/6 of the circle is 300 degrees.

Answer:

The answer is

-7/8 + 3/10

Step-by-step explanation:

See the picture

Hope you understand :)

Therefore, the best measure of center for this data is the median, and its value is 3.

The median is a measure of central tendency that represents the middle value of a set of data when it is arranged in order from lowest to highest (or highest to lowest). It is the value that divides the data set into two equal halves, with half of the values above and half below the median.

Here,

The median is the best measure of center for this data because it is skewed and not symmetrical. The value of the median can be found by ordering the data from smallest to largest: 1, 1, 2, 2, 3, 3, 3, 3, 4, 4, 5, 5, 5, 10. The median is the middle value, which is 3.

To know more about median,

https://brainly.com/question/29156884

#SPJ1

Answer:

4x+3

Step-by-step explanation:

Answer:

A. 4x+3

Step-by-step explanation:

Combining like terms 8x and −4x

Will give you the asnwer to 4x

which will give you 4x + 3

Player B is the most consistent, with a range of 7.

The best measure of variability for this data would be the range, which is the difference between the maximum and minimum values.

For Player A: Range = 11 - 1 = 10

For Player B: Range = 8 - 1 = 7

Therefore, Player A has a higher range and thus more variability in their data. So, the correct answer is:

Player B is the most consistent, with a range of 7.

What is variability?

Variability refers to the degree of variation or diversity in a set of data or observations. It is a measure of how spread out the data points are from the central tendency, such as the mean or median.

What is range?

Range is a statistical measure that describes the difference between the maximum and minimum values in a dataset. It is calculated by subtracting the smallest value from the largest value.

To know more about range, visit:

https://brainly.com/question/29452843

#SPJ1

Answer:

  (d)  Player B is the most consistent, with an IQR of 2.5.

Step-by-step explanation:

Given these numbers of goals, you want to know which player is most consistent, and the best measure of that.

The variability measures we're to consider here are range and IQR.

The range is the difference between the maximum and the minimum:

The smaller range indicates player B is more consistent.

The IQR is the difference between the upper and lower quartiles. In each of these 9-element data sets, those quartiles will be the average of elements 2 and 3, and the average of elements 7 and 8 when the data is in order.

The smaller IQR indicates player B is more consistent.

In each case, the maximum data value is more than 1.5 times the IQR above the upper quartile value, so can be considered an outlier. The outlier has a direct effect on range, so range is not a good measure of variability.

Player B is the most consistent, with an IQR of 2.5, choice D.

__

Additional comment

If the outlier is excluded from each data set, the IQR for player A remains the same at 3.5. The IQR for player B drops to 2.0.

<95141404393>

The estimated enrollment of a high school in 2022 is approximately 2775 students.

To calculate the estimated enrollment in 2022, we need to use the formula for compound interest:

A =[tex]P(1 + r)^t[/tex]

where:

A = final amount (enrollment in 2022)

P = initial amount (enrollment in 2012)

r = annual interest rate (increase rate)

t = number of years (10)

We know that P = 1350 and r = 0.09 (9%). We can plug these values into the formula:

A = [tex]1350(1 + 0.09)^{10[/tex]

A = [tex]1350(1.09)^{10[/tex]

A = 2774.92

Therefore, the estimated enrollment in 2022 is approximately 2775 students.

Learn more about Percentages:

https://brainly.com/question/24877689
#SPJ4

Answer:

Step-by-step explanation:

Given diameter of a beach ball is d=10 inches.Let us find the radius of the beach ball:d=2 r10=2×rr=102∴r=5Therefore, the radius of a beach is 5 inches.Let us find the volume of air contained inside the beach ball:V=43 π×r3=43 π×53=43 π×125=500π3∴V=523.59877Therefore, the volume of air contained inside the beach ball is approximately 523.6 in3.

Answer:

The formula for the volume of a sphere is:

V = (4/3)πr³

We can rearrange this formula to solve for the radius (r):

r = [(3V) / (4π)]^(1/3)

where V is the volume of the sphere.

Substituting the given volume of the beach ball, we get:

r = [(3 × 10,332 in³) / (4 × 3.14)]^(1/3)

r = 10.27 in

Rounding to the nearest tenth, the approximate radius of the beach ball is 10.3 inches.

    the baker needs 15 gallons of milk to make 80 chocolate pies for the community festival. To translate the phrase "9r subtract three fifths greater than 3 and 9 tenths" into an expression, we first need to understand what it's asking us to do.  

  "Three fifths greater than 3 and 9 tenths" means we need to add 3 and 9 tenths to three fifths of 3. Three fifths of 3 is 1.8 (since 3/5 * 3 = 9/5 = 1.8), so we can write:

3 + 9/10 + 1.8

We can simplify this to a single mixed number by adding the whole numbers and the fractions separately:

3 + 1 + 8/10 + 8/5

= 4 + 1 3/5

= 5 3/5

So "three fifths greater than 3 and 9 tenths" is equal to 5 3/5.

Now we can subtract this value from 9r:

9r - 5 3/5

We can simplify this expression further by converting 5 3/5 to a fraction with a common denominator of 5:

9r - 5 3/5 = 9r - (28/5) = (45/5)r - (28/5) = (9r - 28) / 5

So the final expression is:

(9r - 28) / 5

In summary, "9r subtract three fifths greater than 3 and 9 tenths" can be translated to the expression (9r - 28) / 5. This expression represents a quantity that is 9 times "r" minus 5 3/5. We can simplify this expression further by converting the mixed number to an improper fraction and combining the terms, as shown above.

To know more about common denominator click here:

brainly.com/question/29775115

#SPJ4

The dimly lit area is 58 square units in size. The area of a two - dimensional figure is the area that its perimeter encloses.

The area is the space occupied by any two-dimensional figure on a plane. A rectangle's area is how much space it occupies in a the double plane.

The shaded area's size will be determined using the formula

10 units multiplied by 7 units gives a total area of 70 units.

Gap size equals 2 units multiplied by 6 units, or 12 units.

The shaded figure's area is 70 units divided by 12 units, or 58 units.

As a result, 58 square units make up the area of shaded zone.

To know more about area visit:

https://brainly.com/question/26993008

#SPJ1

The probability that exactly n of the collection of n spins will point up is given by the Binomial distribution. The Binomial distribution is a discrete probability distribution that models the number of successes (x) in a given number of trials (n) with a fixed probability of success (p) on each trial.

In this case, we have n trials, with a fixed probability of success of 0.5 (since each spin can point up or down with equal probability). The number of successes we're interested in is n. Thus, the probability of n successes is given by:P(X = n) = (nCn)(0.5)^n = 0.5^nwhere nCn is the number of ways to choose n items from n items, which is 1.Approximation for large n:When n is large, we can use the normal approximation to the Binomial distribution.

Specifically, we use the Normal distribution with mean np and variance np(1-p). In this case, p = 0.5, so the mean and variance are both (0.5)n. Therefore, the probability of n successes is approximately:P(X = n) ≈ φ(x) = (1/σ√2π)exp[-(x-μ)^2/2σ^2]where μ = np = (0.5)n and σ^2 = np(1-p) = (0.5)n(0.5) = (0.25)n.

Plugging these values in, we get:P(X = n) ≈ φ(x) = (1/σ√2π)exp[-(n/2n)^2/2(0.25)n] = (1/σ√2π)exp[-(1/8n)] = (1/√2πn)exp[-(1/8n)]Note that for the large n approximation to be valid, we require np and n(1-p) to be at least 10. In this case, np = (0.5)n and n(1-p) = (0.5)n, so this condition is satisfied for any n.

For more details about probability click here:

https://brainly.com/question/30034780#

#SPJ11

The polynomial 7x² - 4 + 6x³ - 4x - x⁴ in standard form is - x⁴ + 6x³ + 7x² - 4x - 4  

Given that

7x² - 4 + 6x³ - 4x - x⁴

The standard form of a polynomial is when the terms are arranged in decreasing order of degree

To rewrite 7x² - 4 + 6x³ - 4x - x⁴ in standard form, we need to rearrange the terms accordingly:

- x⁴ + 6x³ + 7x² - 4x - 4  

Now the terms are in decreasing order of degree, with the highest degree term first

This is the standard form of the polynomial.

Read more about polynomial at

https://brainly.com/question/7693326

#SPJ1

The missing length n on the projection is  y.

The original triangle and its projection are similar if the three angles are the same. In this case, the missing length n on the projection can be determined by applying the concept of similarity. First, we need to find out the ratio between the lengths of the original triangle and its projection. For example, if the length of the side of the original triangle is x, and the length of its projection is y, the ratio between them is x/y.

Then, using the similar triangles theorem, we can state that the ratio between the other lengths of the original triangle and its projection is the same. This means that if we know one of the lengths, we can calculate the other one. Therefore, if the length of the side of the original triangle is x, and the ratio is x/y, then the length of the projection must be y.

Finally, we can calculate the missing length n on the projection. We know that the length of the projection is y, and we can use the ratio x/y to calculate n. Therefore, n = x*y/x, which is equal to y.

To know more about triangle theorem click here:

https://brainly.com/question/19258025

#SPJ11

Answer:

The area that represents elements contained in the complement of the intersection of swimmers and weightlifters is the region outside the circles labeled as D. Therefore, the answer is D.

Step-by-step explanation:

chatgpt

https://brainly.com/question/2511957

Answer:

26°

Step-by-step explanation:

We know

A triangle is 180°

A triangle has Angle measures 122° and 32°

What is the measure of the third angle? ​

We take

180 - (122 + 32) = 26°

So, the measure of the third angle is 26°

If the number of people arriving for treatment at an emergency room is modeled by a Poisson process with a mean of 5 people per hour, we can use this information to estimate the expected number of people who will arrive during a 45-minute period.

The Poisson distribution describes the probability of a certain number of events occurring in a fixed interval of time, given the average rate at which the events occur. In this case, the Poisson distribution can be used to estimate the number of people who will arrive during a 45-minute period, given that the mean arrival rate is 5 people per hour.

To calculate the expected number of arrivals, we first need to convert the 45-minute time period into hours. There are 60 minutes in an hour, so 45 minutes is equivalent to 0.75 hours.

Next, we can use the Poisson distribution formula, which is:

P(X = k) = (e^(-λ) * λ^k) / k!

where λ is the mean arrival rate (in this case, 5 people per hour), k is the number of arrivals we are interested in, and e is Euler's number (approximately 2.71828).

Expected number of arrivals = λ * t = 5 * 0.75 = 3.75

Therefore, we can expect approximately 3.75 people to arrive for treatment during a 45-minute period, assuming that the number of arrivals follows a Poisson distribution with a mean of 5 people per hour.

For more details about Poisson click here:

https://brainly.com/question/30410181#

#SPJ11

There are 70 ways to put 8 beads of different colors on the vertices of a cube, if rotations of the cube (but not reflections) are considered the same.

Let us start by determining the number of ways to put 8 beads of different colors on the vertices of a cube without any restrictions.

We can choose the first color in 8 ways, the second color in 7 ways, the third color in 6 ways, and so on. Therefore, the total number of ways is 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 40,320.

However, rotations of the cube (but not reflections) are considered the same. There are 24 such rotations. Specifically, there are 4 rotations that preserve the orientation of the cube (i.e., rotations by 0°, 90°, 180°, and 270° around an axis passing through the centers of opposite faces), and there are 6 pairs of rotations that exchange the two sets of 4 vertices that are symmetrically positioned with respect to the centers of opposite faces.

Each of these 24 rotations maps one arrangement of the beads to another.

Thus, we must count the number of arrangements of the beads that are mapped to each other by each rotation. If we do this for each rotation, we get a total of (40,320/24) = 1680 distinct arrangements of the beads.

If we now take any of these 1680 arrangements and apply any of the 24 rotations, we will get an arrangement that we have already counted. Therefore, there are (1680/24) = 70 arrangements of the beads that are distinct when rotations (but not reflections) are considered the same.

In other words, there are 70 ways to put 8 beads of different colors on the vertices of a cube, if reflections are not considered distinct.

To know more about vertices of a cube: https://brainly.com/question/1217219

#SPJ11

Therefore, the coordinates of point S after a dilation with the center at the origin and scale factor of 1/2 are (4, -2).

In mathematics, a factor is a number or expression that divides another number or expression without leaving a remainder. For example, 2 and 3 are factors of 6 because 6 can be divided by 2 and 3 without leaving a remainder. In algebra, factors are often used to factorize an expression, which involves breaking it down into its constituent factors. This is a useful technique for simplifying algebraic expressions, solving equations, and finding common factors in polynomials. Factors are also important in number theory, where they are used to study properties of integers and prime numbers.

Given by the question.

To perform a dilation with the center at the origin and scale factor of 1/2, we need to multiply the coordinates of the point by the scale factor.

The coordinates of point S are (8, -4).

After dilation, the x-coordinate will be 1/2 of 8, and the y-coordinate will be 1/2 of -4:

x' = (1/2) * 8 = 4

y' = (1/2) * (-4) = -2

To learn more about coordinates:

https://brainly.com/question/30530554

#SPJ1

The standard fοrm οf the quadratic functiοn is Y = -4(x + 2.5)² + 121

Standard Fοrm: the standard fοrm οf a line is in the fοrm Ax + By = C where A is a pοsitive integer, and B, and C are integers

First, let's expand the expressiοn:

Y = -4(x-3)(x+8)

Y = -4(x² + 8x - 3x - 24)

Y = -4x² - 20x + 96

Y = ax² + bx + c

where a, b, and c are cοnstants.

Tο dο this, we can factοr οut the -4 frοm the first twο terms:

Y = -4(x² + 5x) + 96

Y = -4(x² + 5x + 6.25 - 6.25) + 96

Simplifying the first three terms inside the parentheses, we get:

Y = -4((x + 2.5)² - 6.25) + 96

Expanding the -4 and simplifying, we get:

Y = -4(x + 2.5)² + 121

Therefοre, the standard fοrm οf the quadratic functiοn is:

Y = -4(x + 2.5)² + 121

To know more about Standard Form visit,

https://brainly.com/question/26238391

#SPJ9

Answer:

The first one

Step-by-step explanation:

Use the pythagoras theorem=a ^2+b^2 =c^2

Use a is 9 b is 40 because the largest value is always the hypotenuse and the hypotenuse is always c.

so you do 9 squared add 40 squared to find c squared.

Square root the answer and you get 41 so it is a pythagoras triple

can we see a picture or equation

From the given information provided, Laura can cut 3 one-thirds strips from the 1 meter long ribbon.

If Laura has a strip of ribbon 1 meter long, we need to find out how many one-thirds strips can be cut from it.

To do this, we need to divide the length of the ribbon by the length of each one-third strip:

Number of one-thirds strips = Length of ribbon / Length of one-third strip

The length of each one-third strip is 1/3 meters, since one-third of a meter is required to make each strip.

So we can substitute these values into the formula:

Number of one-thirds strips = 1 meter / (1/3 meter)

Number of one-thirds strips = 1 meter x (3/1)

Number of one-thirds strips = 3

Learn more about length here: brainly.com/question/28108430

#SPJ4

1)

A line that fits the whole data set the best.

2)

The line of best fit is y = 5.1 + 0.5x

3)

The equation of best fit is T = 39.6 + 0.225r

4)

The slope of the line of best fit is -0.531.

5)

From the table, it is clear that the s-intercept would be positive.

Barrett's line would have a negative intercept because the slope is negative.

The line of best fit is a straight line that represents the trend or pattern in a set of data. It is also known as the regression line.

This line is determined by analyzing the data and finding the line that comes closest to all of the points in the set. T

We have,

1)

The line of best fit is the line that fits the whole data set the best.

It's the line that comes closest to all of the points in the data set, and it can be used to make predictions or to describe the relationship between the two variables in the data set.

2)

To find the line of best fit, we need to calculate the slope and y-intercept of the line.

Using the least squares method, we find that the slope is 0.5 and the y-intercept is 5.1.

Therefore, the equation of the line of best fit to predict y from x is y = 5.1 + 0.5x.

3)

To find the equation of the line of best fit, we need to calculate the slope and y-intercept of the line.

Using the least squares method, we find that the slope is 0.225 and the y-intercept is 39.6.

Therefore, the equation of the line of best fit to predict T from r is T = 39.6 + 0.225r.

4)

To find the slope of the line of best fit, we need to calculate the covariance and variance of the x and y variables.

Using the least squares method, we find that the slope is -0.531.

5)

From the table, we can see that the s-intercept (the value of s when d is zero) would be positive.

Therefore, a line with a negative slope would have a negative y-intercept, which is not possible.

This means that Barrett's answer is incorrect, and the slope of the line of best fit must be positive.

Thus,

C. a line that fits the whole data set the best.

C. y = 5.1 + 0.5x

A. T = 39.6 + 0.225r

A. -0.531

A. From the table, it is clear that the s-intercept would be positive.

Barrett's line would have a negative intercept because the slope is negative.

Learn more about line of best fit here:

https://brainly.com/question/30295400

#SPJ2

Answer: b. 12

Step-by-step explanation:

16 + 4 − (5 x 2) + 2

= 16 + 4 - 10 + 2

= 20 - 12

= 12

Answer:

Step-by-step explanation:

8

The magnitude of the force P is 464.77 N.

STEP BY STEP EXPLANATION:

Step 1: Break down each force into components.
F = 320 N at 30°
Fx = F * cos(30°) = 320 * cos(30°) = 277.13 N (horizontal)
Fy = F * sin(30°) = 320 * sin(30°) = 160 N (vertical)

120 N is in the horizontal direction (assume positive x-direction):
Fx2 = 120 N

80 N is in the vertical direction (assume positive y-direction):
Fy2 = 80 N

Step 2: Sum up the components.
Total horizontal force (Fxtotal) = Fx + Fx2

= 277.13 + 120 = 397.13 N

Total vertical force (Fytotal) = Fy + Fy2

= 160 + 80 = 240 N

Step 3: Find the magnitude of the resultant force.
            Resultant force (R) = sqrt(Fxtotal^2 + Fytotal^2)

= sqrt(397.13^2 + 240^2) = 464.77 N

Step 4: Determine the magnitude of the force P.
Since the resultant of the four forces should act on the rim of the plate, it means that the force P should be equal in magnitude and opposite in direction to the resultant force R.

The magnitude of the force P is 464.77 N.

To know more about Magnitude:

https://brainly.com/question/30033702

#SPJ11

The given statement " the null hypothesis predicts there is a relationship between the variable and a significant difference between the groups." is False because the null hypothesis predicts that there is no relationship between the variables and no significant difference between the groups.

A null hypothesis is a statement that suggests that no relationship exists between two variables. It serves as the baseline assumption and a starting point for researchers to test their alternative hypothesis.

Null hypothesis testing is a statistical method used to compare two mutually exclusive propositions: the null hypothesis and the alternative hypothesis.

In hypothesis testing, the null hypothesis states that there is no significant difference between two groups, while the alternative hypothesis suggests that there is a significant difference between the two groups.

If the observed data deviates significantly from what we would expect under the null hypothesis, we reject it in favor of the alternative hypothesis.

If the observed data does not significantly deviate from what we would expect under the null hypothesis, we fail to reject it.

Know more about null hypothesis here:

https://brainly.com/question/4436370

#SPJ11

Providing free access to a variety of stimuli for the purposes of identifying potential reinforcers is best described by Free Operant Preference Assessment.

What is a free operant preference assessment? Free operant preference assessment refers to a behavior analysis process used to determine the preferred stimulus of an individual in a naturalistic environment. This method measures the potential and meaningful reinforcers through the observation of a child's free time. A reinforcement is a consequence that strengthens a behavior.The free operant preference assessment is frequently utilized in the autism field to identify reinforcing stimuli. It is a process of assessing a child's preferred items and actions in a naturalistic setting.The free operant preference assessment is conducted in three different stages: Stage 1: involves observation of preferred items and items that are likely to become potential reinforcers, Stage 2: involves assessing for a hierarchy of items and stage 3 involves using the data gathered to plan the student’s schedule, including reinforcement and non-contingent time periods.

Learn more about reinforcers here, https://brainly.com/question/14316466

#SPJ11

FREE OPERANT PREFERENCE ASSESSMENT. Providing free access to a variety of stimuli for the purposes of identifying potential reinforcers is best described by Free Operant Preference Assessment.

A free operant preference assessment is a measure of the attractiveness or preference for various stimuli by measuring an individual's time spent with them.

Free access to different stimuli is given to the individual to determine their preferences, which are subsequently used to reinforce the desired behavior or work on behavior modification through behavior analysis.

The steps to conducting a Free Operant Preference Assessment: Prepare the list of stimuli: Initially, you have to prepare a list of stimuli that you believe may act as a reinforcer for the individual, which may include toys, foods, or other things that the person likes.

Prepare the environment: Arrange the stimuli in a room, and let the individual enter it.

Make sure that there is sufficient space to move around and that the person has free access to all of the stimuli.  

Record the time the individual spends with each stimulus. You can observe the person, either directly or through video recording.

 Based on the data obtained, the most preferred and least preferred stimuli can be identified. Then, these preferred stimuli can be used as potential reinforcers.

LEARN MORE ON  REINFORCER:https://brainly.in/question/55312435

#SPJ11

The amount of water that the pitcher contained before Mai added more water was 7.8 liters.

Let x be the amount of water the pitcher contained before Mai added more water.

When Mai poured 2.6 liters of water, the total amount of water in the pitcher became x + 2.6 liters.

According to the problem, the pitcher then contained 10.4 liters of water. Therefore, we can write:

x + 2.6 = 10.4

Subtracting 2.6 from both sides, we get:

x = 7.8

Therefore, the pitcher contained 7.8 liters of water before Mai added more water.

To learn more about liters Click here:
brainly.com/question/14780251

#SPJ4

Step-by-step explanation:

2 pictures are attached

sin waves are used in many medical devices like to measure heart beats