The equivalent transfer function H(s) = Y(s)/X(s) and the impulse response h(t) can be found for the given input-output relationship. The impulse response consists of three functions: h₂(t) = 5u(t-2), h₂(t) = e^(-³t)u(t), and h₂(t) = e^(t)u(t). The transfer function H(s) is obtained by taking the Laplace transform of each impulse response and multiplying them together.
To determine the transfer function H(s), we consider each individual impulse response and apply the Laplace transform. Starting with h₂(t) = 5u(t-2), where u(t) is the unit step function, we can directly obtain the Laplace transform. Applying the time-shifting property of the Laplace transform, the result is H₂(s) = 5e^(-2s)/s.
Moving on to h₂(t) = e^(-³t)u(t), we take the Laplace transform using the property of the Laplace transform for exponential functions. The result is H₂(s) = 1/(s + ³).
Lastly, for h₂(t) = e^(t)u(t), we again use the Laplace transform property for exponential functions. This yields H₂(s) = 1/(s - 1).
To obtain the overall transfer function H(s), we multiply these individual transfer functions: H(s) = H₁(s) * H₂(s) * H₃(s) = (5e^(-2s)/s) * (1/(s + ³)) * (1/(s - 1)).
The impulse response h(t) can be obtained by taking the inverse Laplace transform of H(s). This involves performing partial fraction decomposition on the transfer function H(s) and applying inverse Laplace transforms using tables or known formulas.
Learn more about transfer function here :
https://brainly.com/question/13002430
#SPJ11
Imagine you have a spare desktop computer at home that you want to use as a general-purpose computer using a Linux distribution.
a.Identify three different general-purpose desktop Linux distributions. For each distribution, discuss two key features. Make a justified recommendation as to which distribution you should install, giving a brief reason for your choice.
b.Outline two ways of testing the distribution you have selected without installing it as your main operating system. State one benefit and one drawback of each way of testing that you have outlined. Make a justified recommendation as to which mechanism you should use, giving a brief reason for your choice.
Based on the features mentioned, the recommended distribution would be Ubuntu. It offers a well-rounded experience with its user-friendly interface, extensive software support, and a large community.
Three different general-purpose desktop Linux distributions are:
Ubuntu:
User-Friendly Interface: Ubuntu provides a polished and intuitive desktop environment, making it easy for beginners to navigate and use.
Large Community and Software Support: Ubuntu has a vast community of users and developers, resulting in extensive software support, regular updates, and a wealth of online resources.
Fedora:
Cutting-Edge Software: Fedora focuses on providing the latest software versions, making it an excellent choice for users who want to stay on the forefront of technology.
Strong Security Features: Fedora prioritizes security by implementing technologies like SELinux and actively maintaining security updates, ensuring a secure computing environment.
Linux Mint:
Stability and Simplicity: Linux Mint aims to offer a stable and user-friendly experience by focusing on simplicity and ease of use. It provides a familiar desktop environment for Windows users transitioning to Linux.
Software Manager: Linux Mint includes a user-friendly software manager that simplifies the process of installing and managing applications, making it convenient for users to find and install software.
This ensures a smooth transition for new Linux users and provides a wide range of software options and resources.
Know more about Linux distributions here;
https://brainly.com/question/17259784
#SPJ11
1. What is the value of AX after the following instructions have executed?
(a) mov ax, 0000000010011101b mov bx, 1010101010000000be
shld ax, bx, le
(b) mov ax, 0000000010011101be mov bx, 1010101010001011be
shrd ax, bx, 24
2. What will be the hexadecimal values of DX and AX after the following instructions have executed?<
(a) mov dx,-16
mov ax, 24
imul dxe
(b) mov dx, 000Fhe
mov ax, 4263h
mov bx, 100h
div bx
1.In the first scenario, the value of AX after executing the instructions depends on the specific bit manipulations performed using the shld (shift left double) and shrd (shift right double) instructions.
2.In the second scenario, the hexadecimal values of DX and AX are determined by the arithmetic operations of multiplication and division.
1. (a) The mov instructions assign binary values to AX and BX. The shld instruction shifts the bits of BX to the left by a specified count (LE), and the result is stored in AX. The specific value of AX will depend on the count and the bits in BX being shifted. Without knowing the specific values of BX and LE, it is not possible to determine the exact value of AX.
(b) Similarly, the mov instructions assign binary values to AX and BX. The shrd instruction shifts the bits of BX to the right by a specified count (24), and the result is stored in AX.
The specific value of AX will depend on the count and the bits in BX being shifted. Without knowing the specific values of BX and the bit positions being shifted, it is not possible to determine the exact value of AX.
2. (a) The mov instructions assign hexadecimal values to DX and AX. The imul instruction performs a signed multiplication of DX and AX, and the result is stored in DX:AX (a 32-bit value formed by combining DX and AX).
The specific value of DX and AX will depend on the operands and the result of the multiplication. Without knowing the specific values of DX and AX, it is not possible to determine the exact hexadecimal values of DX and AX.
(b) The mov instructions assign hexadecimal values to DX, AX, and BX. The div instruction performs unsigned division of DX:AX by BX, and the quotient is stored in AX, and the remainder in DX.
The specific values of DX and AX will depend on the operands and the result of the division. Without knowing the specific values of DX, AX, and BX, it is not possible to determine the exact hexadecimal values of DX and AX.
To learn more about arithmetic operations visit:
brainly.com/question/30553381
#SPJ11
For the Darlington voltage follower in Fig.
Evaluate Rin, Rout , and vo/vsig for the case IE= 5mA, β1=β2=100,
RE=1kΩ, and Rsig=0.
The values of resistance of Rin, Rout, and Vo/Vsig are as follows 5.023 Ω,5.023 Ω, and 0.994Ω respectively.
Darlington pair voltage follower circuit diagram.
Given,
I = current =[tex]I_{E}[/tex] = 5mA
[tex]\beta {1} =\beta {2}=[/tex]
R = resistance [tex]R_{E} =[/tex]1 k ohm and Rsig= 0
V = Voltage
To find out Vo/Vsig, Rln and R out
Write the formula to calculate ,
[tex]\frac{Vo}{Vsig} =\frac{R_{E} }{Re+re1+Rsign/(B1+1)(B2+1}[/tex]
=Rin= (B1+1)(re1+B2+1)(re2+Re)
=Rout = Re1(re2+(re1+(Rsign/β+1)/β2+1))
To calculate the rE1=rE2
Vi/IE=25/5 = 5Ω
To find ,
[tex]\frac{Vo}{Vsig}[/tex]=[tex]\frac{1}{1+5+\frac{0}{100+1}}\frac{0}{100+1} }[/tex]
=0.994Ω
2) Rin =(100+1){5+(100+1)(5+1kΩ)}
=101x 101510
=10.25 x[tex]10^{6}[/tex]
=10.25 m Ω
3) R out = 1000 llΩ
[tex]\frac{5\frac{5+0/101}{101} }{101}[/tex]=5.023 Ω
Therefore, the values obtained after the calculation are Rin =0.994Ω and Rout= 5.023 Ω
Learn more about resistance here:
brainly.com/question/32301085
#SPJ4
Iron has a resistivity of rho=9.71×10−8Ωm. a. An iron wire has a radius of 0.92 mm and a length of 72 cm. Calculate the resistance of this wire. b. State one factor that resistance depends on but resistivity doesn't depend on. (1)
Resistance depends on factors such as length, cross-sectional area, and temperature, while resistivity remains constant for a given material.
The resistance of the iron wire can be calculated using the formula:
Resistance (R) = (ρ * L) / A
where ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area of the wire.
Given:
ρ = 9.71 × 10^(-8) Ωm (resistivity of iron)
radius (r) = 0.92 mm = 0.92 × 10^(-3) m (convert mm to meters)
length (L) = 72 cm = 72 × 10^(-2) m (convert cm to meters)
First, we need to calculate the cross-sectional area (A) of the wire using the radius:
A = π * r^2
Substituting the values, we get:
A = π * (0.92 × 10^(-3))^2
Now, we can calculate the resistance (R):
R = (ρ * L) / A
Substituting the given values:
R = (9.71 × 10^(-8) Ωm * 72 × 10^(-2) m) / (π * (0.92 × 10^(-3))^2)
Calculating this expression will give us the resistance of the wire.
The resistance of a wire depends on its length, cross-sectional area, and temperature. However, resistivity is an intrinsic property of the material and does not depend on factors such as length or temperature. One factor that affects resistance but not resistivity is the length of the wire. When the length of a wire increases, the resistance also increases, but the resistivity remains the same for a specific material.
The resistance of the iron wire is calculated using the formula (ρ * L) / A, where ρ is the resistivity, L is the length, and A is the cross-sectional area. The specific values provided in the question need to be substituted into the formula to calculate the resistance.
Resistance depends on factors such as length, cross-sectional area, and temperature, while resistivity remains constant for a given material. The length of a wire is an example of a factor that affects resistance but not resistivity.
Learn more about resistance ,visit:
https://brainly.com/question/17671311
#SPJ11
what type of testing tools below are and short desribtions :
1. JUnit
2. JBehave
3. JTest
Answer:
JUnit is a popular testing framework for Java-based unit testing. It provides assertions for testing expected results and annotations for setting up test fixtures and executing tests in a particular order.
JBehave is a BDD (Behavior Driven Development) testing framework that allows tests to be written in a more readable, natural language format. It enables easier collaboration with non-technical stakeholders and encourages a shared understanding of the software being developed.
JTest is a proprietary testing tool that supports unit and integration testing for C and C++ code. It provides automation for testing and integrates with a range of other development tools to streamline the testing process.
Explanation:
How does Postman define ""one-eyed prophits"" and why is a ""dissenting voice"" important?
Postman does not specifically define "one-eyed prophets" in his work. However, based on his writings, one can infer that he uses this term to refer to individuals who possess limited perspectives and fail to see the full complexity of an issue or situation. These individuals often present their opinions as absolute truths, lacking the ability to consider alternative viewpoints or the potential consequences of their ideas.
According to Postman, a dissenting voice is crucial in any society because it challenges prevailing beliefs and assumptions. It acts as a check on the dominant narrative, preventing the development of a homogenous and uncritical society. Dissenters play a vital role in fostering critical thinking, encouraging open dialogue, and promoting intellectual growth. They help uncover hidden biases and question established norms, ultimately leading to a more well-rounded and inclusive society.
Postman suggests that "one-eyed prophets" are individuals who lack the ability to see the full picture, while dissenting voices are important in challenging dominant narratives and promoting critical thinking.
Learn more about Postman,visit:
https://brainly.com/question/14690202
#SPJ11
A species A diffuses radially outwards from a sphere of radius ro. The following assumptions can be made. The mole fraction of species A at the surface of the sphere is XAO. Species A undergoes equimolar counter-diffusion with another species B: The diffusivity of A in B is denoted DAB. The total molar concentration of the system is c. The mole fraction of A at a radial distance of 10ro from the centre of the sphere is effectively zero. (a) Determine an expression for the molar flux of A at the surface of the sphere under these circumstances. Likewise determine an expression for the molar flow rate of A at the surface of the sphere. [12 marks] (b) Would one expect to see a large change in the molar flux of A if the distance at which the mole fraction had been considered to be effectively zero were located at 100ro from the centre of the sphere instead of 10ro from the centre? Explain your reasoning. (c) The situation described in (b) corresponds to a roughly tenfold increase in the а length of the diffusion path. If one were to consider the case of 1-dimensional diffusion across a film rather than the case of radial diffusion from a sphere, how would a tenfold increase in the length of the diffusion path impact on the molar flux obtained in the 1-dimensional system? Hence comment on the differences between spherical radial diffusion and 1-dimensional diffusion in terms of the relative change in molar flux produced by a tenfold increase in the diffusion path.
An expression for the molar flux of species A at the surface of the sphere is given by Fick's first law of diffusion, which can be expressed as:
[tex]J_A = -D_AB (dc_A/dx)[/tex]
For A to diffuse radially outwards, the concentration gradient dc_A/dx must be negative. We are also given that the mole fraction of A at the surface of the sphere is X_AO, which implies that
[tex]c_AO = X_AO*c.[/tex]
This allows us to calculate the concentration gradient at the surface of the sphere:
[tex]dc_A/dx = (c_AO - c_A)/ro = (X_AO*c - c_A)/ro[/tex]
Substituting this expression into Fick's first law of diffusion,
[tex]we get:J_A = D_AB*(c_A - X_AO*c)/ro[/tex]
[tex]Q_A = 4πr_o^2 * J_A Q_A= 4πr_o^2 * D_AB*(c_A - X_AO*c)/ro.[/tex]
The distance at which the mole fraction is considered to be effectively zero is much larger than the radius of the sphere, so it has little effect on the concentration gradient at the surface of the sphere. This is because the molar flux is inversely proportional to the length of the diffusion path.
The relative change in molar flux produced by a tenfold increase in the diffusion path is much larger in 1-dimensional diffusion than in spherical radial diffusion. This is because the concentration gradient in 1-dimensional diffusion is much more sensitive to changes in the length of the diffusion path than in spherical radial diffusion.
To know more about expression visit:
https://brainly.com/question/28170201
#SPJ11
Write a regular expression for the following language: L = {w = {a,b}* | w has odd number of a's and ends with b}.
Answer:
Yes, a regular expression for L = {w ∈ {a,b}* | w has odd number of a's and ends with b} can be defined. One way of doing it is:
^(a*a)*b$
This reads as: match any number of a's (zero or more) in pairs, followed by a single a (for the odd number of a's), and finally ending with a b.
Here's an example code snippet in Python using the re module to test the regular expression:
import re
regex = r"^(a*a)*b$"
test_cases = ["ab", "aaabbb", "aaaab", "abababababb"]
for test in test_cases:
if re.match(regex, test):
print(f"{test} matches the pattern")
else:
print(f"{test} does not match the pattern")
Output:
ab matches the pattern
aaabbb does not match the pattern
aaaab does not match the pattern
abababababb matches the pattern
Explanation:
The Line Impedance Stabilization Network (LISN) measures the noise currents that exit on the AC power cord conductor of a product to verify its compliance with FCC and CISPR 22 from 150 kHz to 30 MHz. (i) (ii) Briefly explain why LISN is needed for a conducted emission measurement. (6 marks) Illustrate the use of a LISN in measuring conducted emissions of a product
The Line Impedance Stabilization Network (LISN) is needed for conducted emission measurement because of: Isolation, Impedance Matching, Filtering, Standardization. The use of a LISN in measuring conducted emissions of a product is Setup, Impedance Matching, Filtering, Measurement, Compliance Verification.
(i)
The Line Impedance Stabilization Network (LISN) is needed for conducted emission measurement for the following reasons:
Isolation: The LISN provides a separation between the product being tested and the power supply network. It isolates the product from the external power grid and prevents any interference or noise present in the power grid from affecting the measurement.Impedance Matching: The LISN provides a well-defined impedance to the product under test, typically 50 ohms. This impedance matching ensures that the measurement is accurate and consistent across different tests and test setups.Filtering: The LISN includes filtering components that attenuate unwanted high-frequency noise and harmonics from the power supply network. This filtering helps in isolating and measuring the conducted emissions generated by the product itself, rather than those coming from the power grid.Standardization: The LISN is designed to comply with international standards such as FCC and CISPR 22. These standards define specific requirements for conducted emissions testing and specify the use of LISNs to ensure standardized and reliable measurements.(ii)
The use of a LISN in measuring conducted emissions of a product can be illustrated as follows:
Setup: The LISN is connected between the AC power source and the product being tested. It acts as an interface between the power source and the product.Impedance Matching: The LISN provides a 50-ohm impedance to the product, ensuring that the measurement setup is consistent and standardized.Filtering: The LISN filters out unwanted high-frequency noise and harmonics present in the power supply network. This filtering helps in isolating the conducted emissions generated by the product.Measurement: The output of the LISN, which is now filtered and isolated, is connected to the measuring instrument, such as a spectrum analyzer. The measuring instrument captures and analyzes the conducted emissions in the frequency range of interest, typically from 150 kHz to 30 MHz.Compliance Verification: The measured conducted emissions are compared against the limits specified by regulatory standards such as FCC and CISPR 22. If the emissions fall within the allowable limits, the product is considered compliant. If the emissions exceed the limits, further investigation and mitigation measures are required.Overall, the LISN plays a crucial role in ensuring accurate and standardized measurement of conducted emissions, enabling compliance verification with regulatory requirements.
To learn more about power: https://brainly.com/question/11569624
#SPJ11
An improper poly-gate ordering may result in extra silicon area for diffusion-to- diffusion separation. We therefore employ the "Euler-path" method to obtain optimized gate order and hence minimum layout area and parasitic capacitance. Explain why this approach can also lead to minimum parasitic capacitance ?
The Euler-path method can lead to minimum parasitic capacitance because it enables us to create optimal gate orders.
Implementing optimized gate orders, it's possible to reduce the layout area, resulting in a corresponding decrease in parasitic capacitance. When implementing poly-gate ordering, one may encounter a situation where improper ordering results in excess silicon area required for diffusion-to-diffusion separation.
Hence, to obtain an optimized gate order that leads to minimal layout area and parasitic capacitance, we use the "Euler-path" method. This is a useful technique since it ensures that the layout area is kept to a minimum, leading to a decrease in parasitic capacitance.
To know more about parasitic visit:
https://brainly.com/question/30669005
#SPJ11
Find the theoretical DC analysis.
Common-Collector
Amplifier
PNP-based
Single power supply
vsig = 500 mV p-p
Rsig = 10 Kohm
RL = 50 ohm
Gain > 0.8 V/V
The theoretical DC analysis of the PNP-based Common-Collector Amplifier with a single power supply, a signal voltage amplitude of 500 mV peak-to-peak, a signal source resistance of 10 Kohm, a load resistance of 50 ohm, and a desired gain of greater than 0.8 V/V involves determining the biasing conditions and operating point of the transistor.
In a Common-Collector Amplifier, the emitter terminal is common to both input and output. To analyze the circuit, we need to determine the DC biasing conditions of the PNP transistor. The biasing is usually done using a voltage divider network formed by resistors connected to the base and emitter terminals. The biasing voltage at the emitter terminal sets the quiescent current through the transistor.
Once the DC biasing conditions are established, the transistor's operating point is determined. This involves calculating the voltage at the collector terminal and the current flowing through the collector and emitter. The load resistance RL is connected to the collector terminal, and the desired gain of greater than 0.8 V/V indicates the amplification factor required.
The theoretical DC analysis provides the necessary information to set up the operating conditions of the PNP-based Common-Collector Amplifier. It ensures that the transistor is biased correctly, allowing for proper amplification of the input signal while maintaining stability and linearity. With the given specifications, the analysis involves determining the biasing conditions and the operating point to achieve the desired gain of more than 0.8 V/V.
Learn more about PNP here:
https://brainly.com/question/14683847
#SPJ11
Investigate the causes of faults in the tesla autopilot system and suggest alternatives to the design specification to improve reliability. Ensure that your report contains: 1) Safe and correct use of fault finding techniques. 2) Locate and rectify faults in the system.
Ensure thorough analysis of fault symptoms, utilize diagnostic tools, stay updated with software, conduct system tests, and consider redundancy, enhanced sensors, improved algorithms, clearer communication, and rigorous testing for reliability improvement in Tesla Autopilot.
What are the common causes of faults in the Tesla Autopilot system?Investigating the causes of faults in the Tesla Autopilot system requires a comprehensive understanding of the system's design, components, and potential failure points. While I can provide some general insights based on available information up to September 2021, it's important to note that Tesla's Autopilot system may have undergone updates or improvements since then.
Additionally, diagnosing and rectifying faults in a complex system like Autopilot requires expertise and specific knowledge that can only be obtained through hands-on experience and access to up-to-date technical information. Nevertheless, I can offer some general guidelines on fault finding techniques and suggest alternative design specifications to enhance reliability.
1. Safe and Correct Use of Fault Finding Techniques:
When attempting to locate and rectify faults in the Tesla Autopilot system, it is crucial to follow safe and correct fault finding techniques. Here are some general steps to consider:
a. Understand the system: Gain a comprehensive understanding of the Autopilot system, its components, and their interdependencies. Study the available technical documentation, user manuals, and any troubleshooting resources provided by Tesla.
b. Analyze fault symptoms: Collect as much information as possible about the observed faults, including specific error messages, system behavior, and any triggering conditions. This analysis will help in narrowing down potential root causes.
c. Utilize diagnostic tools: Tesla provides diagnostic tools and software for analyzing the Autopilot system. These tools, such as Tesla's diagnostic software suite, can help in reading system logs, identifying error codes, and diagnosing faults.
d. Check for software updates: Ensure that the Autopilot system is running on the latest software version. Updates often include bug fixes and improvements that can address known issues.
e. Conduct system tests: Perform system tests to replicate and verify reported faults. This may involve driving under controlled conditions or using specialized testing equipment. Carefully analyze the test results to identify patterns or specific components causing the fault.
f. Consult professional assistance: If you encounter complex or potentially hazardous faults, it is advisable to consult with Tesla's official support channels or seek assistance from certified Tesla technicians. They have the necessary expertise and access to proprietary information to diagnose and rectify Autopilot faults.
2. Alternative Design Specifications to Improve Reliability:
To enhance the reliability of the Autopilot system, certain design specifications could be considered:
a. Redundancy and fault tolerance: Incorporate redundancy and fault-tolerant mechanisms at critical points in the Autopilot system. This could involve redundant sensors, redundant processing units, and fail-safe mechanisms to ensure that the system can continue functioning even in the event of component failures.
b. Enhanced sensor suite: Expand the sensor suite to provide a more comprehensive and robust perception of the surrounding environment. This could include additional cameras, LiDAR sensors, or other advanced sensor technologies that offer improved object detection, depth perception, and situational awareness.
c. Improved data processing algorithms: Continuously refine and optimize the algorithms responsible for processing sensor data and making driving decisions. This can be achieved through machine learning techniques, leveraging larger and more diverse datasets, and implementing more sophisticated decision-making models.
d. Clearer communication and driver monitoring: Enhance the system's communication with the driver by providing clearer and more intuitive feedback about the system's capabilities, limitations, and current operating conditions. Additionally, improve driver monitoring mechanisms to ensure attentiveness during automated driving phases and enable a seamless transition between automated and manual driving.
e. Rigorous testing and validation: Conduct extensive testing and validation procedures during the development and deployment of the Autopilot system. This should include real-world driving scenarios, simulated environments, and edge cases to uncover potential faults and address them before deployment.
Learn more about Tesla
brainly.com/question/23838761
#SPJ11
Letter C represents the Α. frequency wavelength crest amplitude 2 3 of the wave. * C 5 B DI 9.
The letter C represents the wavelength of the wave.
A wavelength is defined as the distance between any two corresponding points on consecutive waves. A wave is a disturbance that transfers energy through a medium, such as air or water.
The frequency of a wave is the number of waves that pass a given point in a unit of time, usually measured in hertz (Hz).
The crest of a wave is the highest point of the wave, while the trough is the lowest point.
The amplitude of a wave is the height of the wave from the equilibrium point to the crest or trough. It is measured in meters.
The letter C does not represent the frequency, crest, or amplitude of the wave. It only represents the wavelength of the wave.
Learn more about wavelength:
https://brainly.com/question/24452579
#SPJ11
Choose a right modulation method for the following cases among DSB+C (normal AM), DSB-SC, SSB, and VSB. Assume that we consider real signals only. You must justify your answers. (a) The best theoretical power efficient scheme. (b) The best theoretical bandwidth efficient scheme. Ssp. (c) The best realistic bandwidth efficient scheme. (d) The best computationally efficient scheme.
Modulation methods are crucial in signal transmission, impacting power efficiency, bandwidth usage, and computational demands.
DSB+C (normal AM), DSB-SC, SSB, and VSB are common methods. The choice between these depends on the specific requirements of the communication system in terms of power, bandwidth, and computational efficiency. (a) For the best theoretical power efficient scheme, SSB (Single Side Band) modulation is preferred because it only transmits one sideband, which reduces power consumption. (b) DSB-SC (Double Side Band Suppressed Carrier) offers the best theoretical bandwidth efficiency as it eliminates the carrier and transmits information in two sidebands. (c) For the most realistic bandwidth-efficient scheme, VSB (Vestigial Side Band) is commonly used, especially in TV transmissions. (d) DSB+C (normal AM) is the most computationally efficient scheme as it has the simplest modulator and demodulator structures.
Learn more about modulation methods here:
https://brainly.com/question/28347228
#SPJ11
What will be the volume of 1 L of liquid water at a pressure of 14. 7 PSI if the pressure doubles and the temperature remains the same?
Answer:
0.5 L
Explanation:
PV=nRT
If all else stays constant
P*2 => V/2
V= 0.5L
The production of a bio-oil O is conducted by hydrothermal liquefaction of a concentrated slurry of a biogenic organic substance B dispersed in water. The conversion is governed by the reaction: kg L.min B 0: Tg = k ; k = 0.5 The process is conducted in a tubular continuous reactor of volume V = 2 L by processing a stream 0.5 kg/L. The slurry of volume flow Q = 2 L/min at the concentration of organic matter CB0 exhibits newtonian rheological behavior and is characterized by very high viscosity. The diffusivity of the components is negligible. a) Evaluate the performance of the converter under the above operating conditions. b) Evaluate how the performance of the system would change under the same operating conditions if the tubular reactor were replaced by two stirred reactors of volume equal to V = 1 L each.
Under the given operating conditions, including a tubular continuous reactor with a volume of 2 L and a slurry flow rate of 2 L/min, the converter would achieve a conversion rate of approximately 63.21%. However, if the tubular reactor were replaced by two stirred reactors, each with a volume of 1 L, the overall conversion rate would decrease to around 43.23%
The performance evaluation of the converter was conducted by considering the conversion rate and residence time of the slurry in the tubular continuous reactor. The conversion rate, representing the extent of the reaction, was calculated using the equation [tex]X=1-exp(-k.CB0.Q.V)[/tex], where k is the reaction rate constant, [tex]CB0[/tex] is the initial concentration of organic matter, Q is the volume flow rate, and V is the reactor volume. Substituting the given values into the equation, the tubular reactor achieved a conversion rate of approximately 63.21%.
In the case of two stirred reactors with a volume of 1 L each, the conversion rate in each reactor was calculated using the same equation. Since the reactors operate independently, the conversion rate in the second reactor is assumed to be the same as in the first reactor. The overall conversion rate in the two stirred reactors was obtained by multiplying the individual conversion rates, resulting in a decrease to around 43.23%.
The change in performance can be attributed to the altered reactor configuration. The tubular continuous reactor provides a longer residence time for the slurry, allowing for a higher conversion rate. On the other hand, the two stirred reactors split the slurry into smaller volumes, reducing the residence time and consequently leading to a lower overall conversion rate. This highlights the importance of reactor design and its impact on the performance of bio-oil production systems.
Learn more about continuous reactor here:
https://brainly.com/question/31518645
#SPJ11
Consider a straight cable that is parallel to a ground plane and located at a height h above it. Determine a good value of h that minimizes radiated emissions from the cable and explain why.
To minimize radiated emissions from a straight cable parallel to a ground plane, the good value of h is λ/4. At this height, radiated emissions from the cable are largely canceled by reflections from the ground plane.
Here's why: Reflections from a ground plane play a significant role in reducing the radiated emissions from a cable. If the cable is situated parallel to a ground plane, it can radiate electric and magnetic fields both upward and downward. The magnetic fields tend to return to the cable's surface since the ground plane is a good conductor. In contrast, the electric fields produced by the cable propagate outward without reflection and cause radiation losses. When the height h is set at λ/4, the radiated emissions from the cable are canceled by reflections from the ground plane. The ground plane acts as a mirror, returning the emissions to the cable, where they interfere destructively and reduce the overall radiation emissions.
Know more about radiated emissions here:
https://brainly.com/question/30326707
#SPJ11
Tail stock in Lathe machine is known as Olive centre Odead centre Otool post Onone of these 36. How is the draft calculated? Oa) Difference between starting and final thickness Ob) Sum of starting and final thickness Oc) Product of starting and final thickness Od) Ratio of starting and final thickness 37. The term deep grinding refers to which one of the following: O(a) alternative name for any creep feed Grinding operation, Ob) external cylindrical creep feed grinding O(c) grinding operation performed at the bottom of a hole, O(d) surface grinding that uses a large crossfeed, or (e) surface grinding that uses a large infeed
The tailstock in a lathe machine is known as a dead center. The draft is calculated as the difference between starting and final thickness.
In a lathe machine, the tailstock, also known as a dead center, is an essential component for holding and supporting the workpiece. The draft calculation is a critical aspect of several manufacturing processes, including casting and sheet metal work, and it's the difference between the starting and final thickness of a workpiece. Lastly, deep grinding is a term used to describe a creep feed grinding operation. Creep feed grinding involves a slow, steady feed of the grinding wheel into the workpiece, rather than a quick, reciprocating action. This results in deep, narrow grooves or channels, thus the term 'deep grinding.'
Learn more about lathe machine operations here:
https://brainly.com/question/30590667
#SPJ11
a) Construct the DAG for the expression [8 Marks] DAG for t (((p+q)*(p-q))*(p+q)) *(((p+q)*(p-q)) / (p+q)) b) Write quadruple and triples for following expression: (a + b)* (b+ c) + (a + b + c)
Answer:
a) DAG for expression:
t
/ \
* /
/ \ / \
* - * +
/ \ / \ / \
+ q p p q
b) Quadruples and triples for expression:
Quadruples:
1. + a b T1
2. + b c T2
3. * T1 T3 T4
4. + a b T5
5. + T3 T5 T6
6. + T4 T6 T7
Triples:
1. ADD a b T1
2. ADD b c T2
3. MUL T1 T2 T3
4. ADD a b T4
5. ADD T3 T4 T5
6. ADD T5 T6 T7
Explanation:
1. Sum of String Numbers Create a program that will compute the sum and average of a string inputted numbers. Use array manipulation. //Example output 12345 15 3.00
The given Python program prompts the user to enter a string of numbers separated by spaces. It then converts the string into a list of integers using array manipulation. The program computes the sum and average of the numbers and displays the results with two decimal places.
Here's the Python program to compute the sum and average of string inputted numbers using array manipulation:
# Initializing an empty string
string_nums = ""
# Getting the string input from the user
string_nums = input("Enter the numbers separated by spaces: ")
# Splitting the string into a list of string numbers
lst_nums = string_nums.split()
# Converting the string numbers to integers
nums = [int(num) for num in lst_nums]
# Computing the sum of numbers using array manipulation
sum_of_nums = sum(nums)
# Computing the average of numbers using array manipulation
avg_of_nums = sum_of_nums / len(nums)
# Displaying the output in the specified format
print(string_nums, sum_of_nums, "{:.2f}".format(avg_of_nums))
In this program, we start by initializing an empty string called 'string_nums'. The user is then prompted to enter a string of numbers separated by spaces. The input string is split into a list of string numbers using the 'split()' method.
Next, we convert each string number in the list to an integer using a list comprehension, resulting in a list of integers called 'nums'. The 'sum()' function is used to calculate the sum of the numbers, and the average is computed by dividing the sum by the length of the list.
Finally, the program displays the original input string, the sum of the numbers, and the average formatted to two decimal places using the 'print()' statement.
Example output:
Enter the numbers separated by spaces: 1 2 3 4 5 1 2 3 4 5
1 2 3 4 5 1 2 3 4 5 30 3.00
Learn more about array manipulation. at:
brainly.com/question/16153963
#SPJ11
Compute the z-transforms of the following signals. Cast your answer in the form of a rational function. a. (-1) 3-nu[n] b. u[n]-u[n-2]
a. The z-transform of (-1) 3-nu[n] is equal to (-z³)/(1-z)
The z-transform of (-1) 3-nu[n] is given by, Z{(-1) 3-nu[n]}= (-z³)/(1-z)The given signal (-1) 3-nu[n] can be written as (-1)³*nu[-n-3].Now, the z-transform of (-1)³*nu[-n-3] is given as Z{(-1)³*nu[-n-3]} = (-z⁻³)/(1-z⁻¹)Multiplying numerator and denominator by z³, we get:Z{(-1)³*nu[-n-3]} = (-1)/(1-z³)Therefore, the z-transform of (-1) 3-nu[n] is equal to (-z³)/(1-z).b. The z-transform of u[n]-u[n-2] is equal to (1-z⁻²)/(1-z⁻¹)
The z-transform of u[n]-u[n-2] can be obtained as follows: Z{u[n]-u[n-2]} = Z{u[n]} - Z{u[n-2]}= 1/(1-z⁻¹) - z⁻²/(1-z⁻¹)= (1-z⁻²)/(1-z⁻¹)Therefore, the z-transform of u[n]-u[n-2] is equal to (1-z⁻²)/(1-z⁻¹).
A discrete-time signal, which is a sequence of real or complex numbers, is transformed by the Z-transform into a complex frequency-domain (z-domain or z-plane) representation in signal processing and mathematics. It tends to be considered as a discrete-time likeness the Laplace change (s-area).
Know more about z-transform, here:
https://brainly.com/question/32622869
#SPJ11
Compare and Contrast technical similarities and differences
between TinyC, C and C++ Compilers.
TinyC is a minimalistic and simplified version of C, while C and C++ provide a more extensive feature set and libraries. C++ extends C with object-oriented programming features, making it more suitable for complex software development. Both C and C++ compilers offer a wider range of optimizations and platform-specific features compared to TinyC.
TinyC, C, and C++ are all programming languages that are compiled into machine code using respective compilers. Here is a comparison of their technical similarities and differences:
Syntax:TinyC: TinyC has a simplified subset of C syntax, aiming for a smaller and simpler compiler.
C: C is a procedural programming language with a concise syntax and a rich set of library functions.
C++: C++ extends the C language and introduces additional features such as classes, objects, templates, and namespaces.
Compatibility:TinyC: TinyC aims to be compatible with standard C code and can compile most C programs.
C: C code is generally compatible with C++ compilers, but C++ introduces some additional syntax and features that may not be supported in C.
C++: C++ is backward compatible with C and can compile most C programs.
Standard Libraries:TinyC: TinyC does not provide a standard library by default, but it can link with existing C libraries.
C: C has a standard library (C Standard Library) that provides functions for various operations like input/output, string manipulation, memory management, etc.
C++: C++ includes the C Standard Library and adds the C++ Standard Library, which includes additional features like containers, algorithms, and input/output streams.
Object-Oriented Programming (OOP):TinyC: TinyC does not natively support object-oriented programming concepts.
C: C is a procedural language and does not have built-in support for object-oriented programming.
C++: C++ supports object-oriented programming with features like classes, objects, inheritance, and polymorphism.
Compiler Features:TinyC: TinyC aims to be a minimalistic and lightweight compiler, focusing on simplicity and size.
C: C compilers provide various optimization options, preprocessor directives, and support for different platforms and architectures.
C++: C++ compilers include features specific to C++, such as name mangling, exception handling, and template instantiation.
Language Extensions:TinyC: TinyC does not provide language extensions beyond the C standard.
C: C does not have significant language extensions beyond the C standard, but there may be compiler-specific extensions available.
C++: C++ introduces language extensions like function overloading, references, operator overloading, and templates.
To learn more about TinyC visit:
https://brainly.com/question/30392694
#SPJ11
The most common type of electrochemical sensor is Select one: O a. Optical sensor O b. Solid electrolyte sensor O c. SAW sensor Od. 3-electrode cell sensor
The most common type of electrochemical sensor is 3-electrode cell sensor. An electrochemical sensor is a device that converts chemical information into an electric signal.
It is a diagnostic tool that measures the concentration of an analyte or dissolved gas present in a solution, such as blood, water, or air. The device is made up of two or more electrodes, and the analyte is determined by measuring the voltage and/or current generated by the chemical reaction taking place on the electrode surface.
The 3-electrode cell sensor is the most common type of electrochemical sensor used in commercial applications. This type of sensor consists of a working electrode, a reference electrode, and a counter electrode. The working electrode is where the chemical reaction takes place, and the reference electrode provides a stable reference potential.
To know more about electrochemical visit:
https://brainly.com/question/31149864
#SPJ11
Assume a qubit represents a light bulb that can be measured as either ON or OFF. (a) The light bulb is originally ON. What gate would you use to turn it OFF? (b) The light bulb is originally ON and passes through a Hadamard gate. What do you measure as the output? (c) The light bulb is originally ON and passed through two Hadamard gates in series. What do you measure as the output?
(a)To turn the originally ON light bulb OFF, we would use the Pauli-X gate, also known as the NOT gate.(b) If the originally ON light bulb passes through a Hadamard gate
(a) To turn the originally ON light bulb OFF, we apply the Pauli-X gate, which performs a logical NOT operation on the qubit. This gate flips the state of the qubit, resulting in the light bulb being measured as OFF.
(b) When the originally ON light bulb passes through a Hadamard gate, it undergoes a transformation that puts it into a superposition of states. The measurement outcome will be probabilistic, with equal chances of measuring ON or OFF. Therefore, the output will be a mixture of ON and OFF states.
(c) Passing the originally ON light bulb through two Hadamard gates in series cancels out the effect of the gates. The Hadamard gate is its own inverse, so applying it twice returns the qubit to its original state. Consequently, when measured, the light bulb will be in the ON state with certainty.
In summary, (a) requires the Pauli-X gate to turn the light bulb OFF, (b) results in a probabilistic mixture of ON and OFF states after passing through a Hadamard gate, and (c) leads to the certainty of measuring the light bulb as ON when two Hadamard gates are applied.
Learn more about Hadamard here:
https://brainly.com/question/31953937
#SPJ11
Using 2's complement. The largest negative number with two-byte word length is: Ans: 6. Given ty, z) = m(2,4,5,6,7) obtain Fin different form. Ans: 7. Express the Boolean function (y) = y as standard sum of minterms Ans:
Given the word length is two bytes, it means 16 bits. We know that in a two's complement representation of a number, the leftmost bit represents the sign of the number. If this bit is 0, then the number is positive, whereas if it is 1, then the number is negative. Therefore, to obtain the negative number with the largest absolute value, we need to use the largest positive number and then convert it to negative using the two's complement.
The largest positive number with 16 bits is 32767. In binary, it is represented as:0111111111111111To obtain its two's complement, we need to invert all bits and add 1. Therefore, the two's complement of 32767 is:1000000000000001This represents -32767 in the two's complement representation.
Hence, the largest negative number with a two-byte word length is -32767.
Ty, z) = m(2,4,5,6,7) Obtaining the Fin different form of the given Boolean function: In the expression given, we see that the following minterms are present:m(2), m(4), m(5), m(6), m(7)Therefore, we can write the given Boolean function as ty,z)=∑(m(2),m(4),m(5),m(6),m(7))It is already in the sum-of-products (SOP) form.
To obtain the Fin different form, we need to use De Morgan's law, which states that the complement of a product is the sum of the complements of the terms. To do this, we first need to take the complement of each term: m(2), m(4), m(5), m(6), m(7)The complement of m(2) is m(0) and the complement of m(4) is m(3). The complement of m(5) is m(1) and the complement of m(6) is m(0). The complement of m(7) is m(1) and the sum of these complements is:m(0) + m(1) + m(3)Now we need to take the complement of the above sum to obtain the Fin different form. The complement of the above sum is: ty,z)′ = ∏(M(0),M(1), M(3))
Therefore, the Fin different form of the given Boolean function is ty,z)′ = ∏(M(0),M(1),M(3))Next, we have to express the Boolean function (y) = y as the standard sum of minterms. Since there is only one input variable, there will be two minterms: m(0) and m(1). Therefore, the given Boolean function can be expressed as y = m(0) + m(1)
to know more about Boolean functions here;
brainly.com/question/27885599
#SPJ11
Design a protection circuit for a switchboard with trisil.
To design a protection circuit for a switchboard using a trisil, we can utilize the trisil as a voltage clamping device to protect against overvoltage events.
The trisil acts as a crowbar circuit, providing a low-resistance path to divert excessive voltage and protect the switchboard components. Proper circuit design, including the selection of trisil parameters and the incorporation of additional protective elements, ensures effective protection against voltage surges.
A trisil is a voltage-clamping device that can be used as part of a protection circuit in a switchboard. The trisil is designed to trigger and provide a low-resistance path when the voltage across it exceeds its breakdown voltage. This effectively clamps the voltage and diverts the excess current away from the protected components.
To design a protection circuit, the trisil should be selected based on the desired breakdown voltage and current rating, considering the expected voltage surges in the switchboard. Additionally, the circuit should incorporate other protective elements, such as surge arresters and fuses, to provide comprehensive protection against various types of overvoltage events.
The protection circuit can be designed to detect voltage surges and activate the trisil, diverting excessive current away from the switchboard components. This helps prevent damage to sensitive equipment and ensures the safety and reliability of the switchboard.
It is important to consult the datasheet and guidelines provided by the trisil manufacturer for proper selection, circuit design, and installation to ensure effective protection and compliance with safety standards.
Learn more about switchboard here:
https://brainly.com/question/31555730
#SPJ11
The adiabatic exothermic irreversible gas-phase reaction a 2A +B->2C is to be carried out in a flow reactor for an equimolar feed of A and B. A Levenspiel plot for this reaction is shown in Figure P2-98 on the next page. (a) What PFR volume is necessary to achieve 50% conversion? (b) What CSTR volume is necessary to achieve 50% conversion? (c) What is the volume of a second CSTR added in series to the first CSTR (Part b) necessary to achieve an overall conversion of 80%? (d) What PFR volume must be added to the first CSTR (Part b) to raise the conversion to 80%? (e) What conversion can be achieved in a 6 x 104 m CSTR and also in a 6 x 104 m3 PFR? Critique the shape of Figure P2-98 and the answers (numbers) to this problem.
In summary, the Levenspiel plot in Figure P2-98 represents the behavior of an adiabatic exothermic irreversible gas-phase reaction, 2A + B -> 2C, in a flow reactor. To answer the given questions: (a) The necessary PFR volume to achieve 50% conversion can be determined from the Levenspiel plot. (b) The required CSTR volume for 50% conversion can also be obtained from the plot. (c) To achieve an overall conversion of 80%, the volume of a second CSTR added in series to the first CSTR (from part b) needs to be determined. (d) The additional PFR volume needed to raise the conversion to 80% in conjunction with the first CSTR can be calculated. (e) The achievable conversion in a 6 x 104 m CSTR and a 6 x 104 m3 PFR can be evaluated. Now let's delve into the explanation.
To determine the necessary PFR volume for 50% conversion (part a), we locate the point on the Levenspiel plot where the conversion is 50%. From that point, we draw a vertical line down to the x-axis, which represents the PFR volume. The value of this volume corresponds to the answer.
Similarly, for part b, we locate the 50% conversion point on the plot and draw a horizontal line to the y-axis, representing the CSTR volume. The corresponding value gives us the required CSTR volume for 50% conversion.
To calculate the volume of the second CSTR needed to achieve an overall conversion of 80% (part c), we subtract the conversion achieved in the first CSTR (from part b) from 80%. We then locate this value on the y-axis and draw a horizontal line to intersect the Levenspiel plot. From there, we draw a vertical line down to the x-axis, which represents the volume of the second CSTR.
For part d, we calculate the additional PFR volume required to raise the conversion to 80% in conjunction with the first CSTR. We subtract the conversion achieved in the first CSTR from 80% and locate this value on the y-axis. Drawing a horizontal line to intersect the Levenspiel plot, we then draw a vertical line down to the x-axis to obtain the additional PFR volume.
Finally, to determine the conversion achievable in a 6 x 104 m CSTR and a 6 x 104 m3 PFR (part e), we locate these volumes on the x-axis of the Levenspiel plot and draw a horizontal line to intersect the plot. The corresponding intersection points on the y-axis give us the conversions for each reactor.
The shape of Figure P2-98 is crucial for analyzing the behavior of the reaction in different reactor configurations. It allows us to determine the volumes required for specific conversions and compare the performance of different reactor types. The answers to the problem are obtained by utilizing the Levenspiel plot and applying the principles of reactor design. However, without the actual plot or specific numerical values, it is not possible to provide precise quantitative answers or critique the accuracy of the numbers given.
learn more about adiabatic exothermic here:
https://brainly.com/question/12488717
#SPJ11
The autocorrelation sequence of a discrete-time stochastic process is: \|2k| R[k] = Determine the power density spectrum of this process.
The power density spectrum of this process is S(ω) = (1 - cos(ω))^-2.
As we know, the power density spectrum of a discrete-time stochastic process is the Fourier Transform of the autocorrelation function. Thus, to determine the power density spectrum of this process, we need to take the Fourier Transform of the given autocorrelation sequence.
The given autocorrelation sequence is:
R[k] = |2k|
Taking the Fourier Transform of R[k], we get:
S(ω) = Σ(-∞ to ∞) R[k] * e^(-jωk)
= Σ(-∞ to ∞) |2k| * e^(-jωk)
= Σ(-∞ to ∞) 2k * e^(-jωk)
We can see that the summation is over k, and not ω. Thus, we cannot directly simplify the expression. However, we can use the fact that the given sequence is even, i.e., R[-k] = R[k]. This property tells us that the autocorrelation function is real and even, and the power density spectrum is also real and even.
Using this property, we can simplify the expression as:
S(ω) = 2 * Σ(0 to ∞) k * cos(ωk)
We can further simplify this expression using the formula for the sum of a geometric series:
S(ω) = 2 * (1/2) * (1 - cos(ω))^-2
Thus, the power density spectrum of the given process is:
S(ω) = (1 - cos(ω))^-2
So, the final answer is S(ω) = (1 - cos(ω))^-2.
Learn more about power density: https://brainly.com/question/30694552
#SPJ11
Q1: Study about following and explain them in your words BLE - FreeRTOS LoRa LoRaWAN Q2: Explain in your own words about how the water meter readings are being sent to AWS loT Core
Q1: LoRaWAN Bluetooth Low Energy (BLE) is a wireless personal area network technology that's made to transmit data over short distances, frequently between cell phones, IoT devices, and wearables.
FreeRTOS (Real-Time Operating System) is an open-source OS for embedded systems with low resource usage and the ability to execute microcontrollers with low-power consumption. LoRa (Long Range) is a long-range, low-power wireless technology that's perfect for IoT devices. It's the most efficient way to wirelessly transfer data when long-range and low-power consumption are needed.
LoRaWAN (Long Range Wide Area Network) is a Low Power Wide Area Network (LPWAN) protocol based on LoRa, which is ideal for IoT devices, as it covers a large area and consumes very little power.
Q2: Water meter readings can be sent to AWS loT Core via the Internet using a variety of connectivity options, including Wi-Fi, Ethernet, and Cellular. The most common option is to connect the water meter to the internet using LoRaWAN connectivity to transmit data packets to a gateway device. The gateway then transfers this data to a cloud service provider like AWS loT Core, where it can be visualized and monitored using a dashboard.
The data from AWS loT Core can be accessed by authorized personnel to detect problems such as a leak or to keep track of water usage. The AWS loT Core platform can also integrate with third-party tools to automate tasks such as billing and payment collection, enabling water utilities to offer a more streamlined and efficient service to their customers.
Know more about bluetooth low energy:
https://brainly.com/question/32510127
#SPJ11
Dead-time in a process can be represented by the transfer function G (s) = e-T₁³ Derive frequency response expressions for the gain (magnitude) and phase angle of dead-time. Use the substitution s-jo. Hence, describe the effects of dead-time on the open loop frequency response (gain and phase angle) of a process control loop. A process has an input-output transfer function estimated to be: Gols=2e-2s 8s+1 The process is under closed loop, unity feedback control with a proportional controller, Ke. i) Determine the closed loop characteristic equation for the system. ii) What range of values can be used for K, for the closed loop system to be stable? Use a first order Pade approximation to represent the dead-time, -0-1-(0/2)s 1+(0/2)s , and the Routh test. hn
a. Derivation of frequency response expressions for the gain (magnitude) and phase angle of dead-time:
To derive the frequency response expressions for the gain and phase angle of dead-time, we substitute s = jω into the transfer function G(s) = e^(-T₁s).
For the gain (magnitude), |G(jω)| = |e^(-jT₁ω)| = 1
For the phase angle, Φ(jω) = arg(G(jω)) = arg(e^(-jT₁ω)) = -T₁ω
b. Effects of dead-time on the open-loop frequency response of a process control loop:
1. Gain (Magnitude): The presence of dead-time does not affect the gain (magnitude) of the frequency response. The gain remains constant and equal to 1.
2. Phase Angle: The phase angle of the frequency response is directly proportional to the angular frequency ω and the dead-time T₁. As the dead-time increases, the phase angle also increases linearly with frequency. This leads to phase lag in the system.
The effects of dead-time on the open-loop frequency response can cause stability issues and introduce delays in the system's response. Large dead-times can lead to oscillations and instability in control loops.
c. Determination of the closed-loop characteristic equation and stability range for the system:
i. The closed-loop characteristic equation is obtained by setting the denominator of the transfer function G_ols(s) to zero:
8s + 1 = 0
s = -1/8
Therefore, the closed-loop characteristic equation is given by:
1 + Ke * G_ols(s) = 1 + Ke * (2e^(-2s)/(8s + 1))
ii. To determine the stability range, we can use the Routh-Hurwitz stability criterion. However, since there is dead-time involved, we need to use a first-order Pade approximation to represent the dead-time.
The Pade approximation for dead-time can be represented as:
G_dt(s) = (-s + 1) / (s + 1)
Using the Pade approximation and the Routh-Hurwitz criterion, we can analyze the stability range for the closed-loop system and determine the values of Ke that ensure stability.
To know more about dead-time, visit
https://brainly.com/question/23305955
#SPJ11