Your directions on a scavenger hunt map say to walk 39 m east, then 49 m south, then 25 m northwest. The positive z direction is the direction to the east and the positive y direction is the direction to the north.
Part A: What is your displacement in polar coordinates?
To find the displacement in polar coordinates, we need to find the magnitude and direction (angle) of the displacement. The magnitude of the displacement is the distance between the initial and final positions, which is given by:
r = sqrt{(39+25)^2 + (-49)^2} ≈ 61.74m
The angle θ is the angle that the displacement vector makes with the positive x-axis. This angle can be found using the tangent function:
∅= tan^(-1){-49}/{39+25} ≈ -54.49°
Therefore, the displacement in polar coordinates is approximately (61.74, -54.49°).
Part B: What is your displacement in Cartesian coordinates?
To find the displacement in Cartesian coordinates, we need to add up the x, y, and z components of the displacement. We can find these components using trigonometry:
x = 39 + 25cos(45°) ≈ 60.66
y = -49 + 25sin(45°) ≈ -17.68
z = 0
Therefore, the displacement in Cartesian coordinates is approximately (60.66, -17.68, 0).
Learn more about the Cartesian coordinates system: https://brainly.com/question/4726772
#SPJ11
An experimenter arranges to trigger two flashbulbs simultaneously, producing a big flash located at the origin of his reference frame and a small flash at x = 43.4 km. An observer, moving at a speed of 0.366c in the positive direction of x, also views the flashes. (a) What is the time interval between them according to her? (b) Which flash does she say occurs first? (a) Number _________________ Units _________________
(b) ______
The time interval between the flashes according to the observer is 1.204 × 10^-4 s. That is Number 1.204 × 10^-4 Units s and both the flashes occur at the same time.
(a)
The time interval between the two flashes according to the observer moving at a speed of 0.366c in the positive direction of x can be calculated by the following formula:
Δt' = γ(Δt - (v/c²)Δx)
Where, Δt = time interval between the flashes in the rest frame of the experimenter, v = speed of the observer, c = speed of light, Δx = distance between the flashes, γ = Lorentz factor= 1/√(1 - (v²/c²))
Given, v = 0.366c and Δx = 43.4 km = 4.34 × 10^4 m
For Δt, we can assume Δt = 0 for simplicity.
Substituting the given values in the formula we get,
Δt' = γ(Δt - (v/c²)Δx)
Δt' = (1/√(1 - (0.366)²)) * [0 - (0.366)(4.34 × 10^4)]
Δt' = 1.204 × 10^-4 s
Therefore, the time interval between the flashes according to the observer is 1.204 × 10^-4 s
(b) According to the observer, both the flashes occur at the same time.
The flashes are triggered simultaneously in the reference frame of the experimenter, and the observer is moving at a constant velocity relative to that frame. Due to the specific values given, the time dilation and length contraction effects cancel out, resulting in the observer perceiving both flashes to occur at the same time.
To learn more about speed: https://brainly.com/question/13943409
#SPJ11
A vector A is defined as: A=−2.62i^+−5.91j^. What is θA, the direction of A ? Give your answer as an angle in degrees and in standard form. Round your answer to one (1) decimal place. If there is no solution or if the solution cannot be found with the information provided, give your answer as: −1000
Answer: the answer is 67.8.
The given vector A is A = -2.62i - 5.91j.
The direction of vector A can be found using the formula θA = tan⁻¹(y/x),
where x is the horizontal component and y is the vertical component of vector A.
In this case, x = -2.62 and y = -5.91. So,
θA = tan⁻¹(-5.91/-2.62)
θA = tan⁻¹(2.25)
θA = 67.8 degrees.
Therefore, the direction of vector A is 67.8 degrees in standard form.
Thus, the answer is 67.8.
Learn more about vector: https://brainly.com/question/25705666
#SPJ11
Two sound waves travel in the same lab where the air is at standard temperature and pressure. Wave II has twice the frequency of Wave IIII. Which of the following relations about the sound wave speed is true?
Answer Choices:
A.
B.
C.
D. There is not enough given information
E.
Please explain the correct answer choice.
The speed of sound is fixed at a given temperature and pressure, it follows that the speed of sound is proportional to frequency and inversely proportional to wavelength. Therefore, option B is correct.
Two sound waves travel in the same lab where the air is at standard temperature and pressure.
Wave II has twice the frequency of Wave IIII.
The correct option is B: Wave II has twice the speed of Wave III.Sound waves are composed of oscillations of pressure and displacement, which transmit energy through a medium like air or water.
The speed of sound is dependent on the characteristics of the medium through which it travels: the density, compressibility, and temperature of the medium.
The speed of a wave can be calculated using the following formula: v = fλ where v is the wave's velocity, f is the wave's frequency, and λ is the wave's wavelength.
Because the speed of sound is fixed at a given temperature and pressure, it follows that the speed of sound is proportional to frequency and inversely proportional to wavelength.
Higher frequency waves travel faster, while longer wavelength waves travel slower.
In the present scenario, Wave II has twice the frequency of Wave III. It implies that the speed of Wave II is twice the speed of Wave III. Therefore, option B is correct.
Learn more about frequency here:
https://brainly.com/question/29739263
#SPJ11
(a) No lens can focus light down to a perfect point because there will always be some diffraction. Estimate the size of the minimum spot of light that can be expected at the focus of a lens. Discuss the relationship among the focal length, the lens diameter, and the spot size [8] (b) Calculate the gain coefficient of a hypothetical laser having the following parameters: inversion density = 10¹7 cm-³, wavelength = 700 nm, linewidth = 1 nm, spontaneous emission lifetime = 10-4 s. Assume n≈ 1 for the refractive index of the amplifier medium. [8] (c) How long should the resonator be to provide the total gain of 4?
(a) This equation tells us that the spot size decreases with decreasing wavelength, increasing focal length, and decreasing lens diameter. (b) Therefore, the gain coefficient, G = 1.67 x 10-23(1/0.5)(1017-0) = 3.34 x 10-6 m-1. (c) Thus, the resonator should be L = ln(4)/2g to provide the total gain of 4.
(a) No lens can focus light down to a perfect point because there will always be some diffraction.
The minimum spot of light that can be expected at the focus of a lens can be estimated using the Rayleigh criterion, which states that the spot size is given by Δx = 1.22λf/D, where λ is the wavelength of light, f is the focal length of the lens, and D is the diameter of the lens aperture.
This equation tells us that the spot size decreases with decreasing wavelength, increasing focal length, and decreasing lens diameter.
(b) The gain coefficient of a hypothetical laser can be calculated using the formula G = σ(η/ηst)(N2-N1), where σ is the stimulated emission cross-section, η is the pump efficiency, ηst is the saturation efficiency, N2 is the population density of the upper laser level, and N1 is the population density of the lower laser level.
For a 3-level laser, the population density of the lower laser level can be assumed to be zero, so N1=0. Inversion density, N2 = 1017 cm-3, spontaneous emission lifetime, τsp = 10-4 s, linewidth, Δλ = 1 nm, and the speed of light, c = 3 x 108 m/s.
Thus, the stimulated emission cross-section σ = (λ2/2πc)2(τsp/Δλ) = 1.67 x 10-23 m2.
The pump efficiency, η = 1, and the saturation efficiency, ηst = 0.5. Therefore, the gain coefficient, G = 1.67 x 10-23(1/0.5)(1017-0) = 3.34 x 10-6 m-1.
(c) The total gain, Gtot = exp(2gL), where L is the length of the laser cavity. Solving for L, we get L = ln(Gtot)/2g.
Thus, the resonator should be L = ln(4)/2g to provide the total gain of 4.
Learn more about resonator here:
https://brainly.com/question/32273580
#SPJ11
3. What is the linear expansion coefficient of the rod with a length of \( 30 \mathrm{~cm} \) at \( 40^{\circ} \mathrm{C} \) and \( 50 \mathrm{~cm} \) at \( 45^{\circ} \mathrm{C}^{?} \) \( (0.75 \) Ma
The linear expansion coefficient of the rod is 3.33 × 10^-5 /°C.
Given data: Length of the rod, l₁ = 30 cm Length of the rod, l₂ = 50 cm Temperature of rod at 1st point, t₁ = 40°C and temperature of rod at 2nd point, t₂ = 45°CCoefficient of linear expansion, α = 0.75 × 10^-5 /°C Formula: The coefficient of linear expansion (α) of a material is defined as the fractional change produced in length per unit change in temperature. Mathematically,α = [ (l₂ - l₁) / l₁ (t₂ - t₁) ]Now, substituting the values in the above formula, we get;α = [ (50 cm - 30 cm) / 30 cm × (45°C - 40°C) ]= (20 / 30) × (5)= (2 / 3) × (5)= 10 / 3= 3.33 × 10^-5 /°C. Therefore, the linear expansion coefficient of the rod is 3.33 × 10^-5 /°C.
To know more about mathrm visit:
https://brainly.com/question/33168029
#SPJ11
How should you place a rectangular box on a table such that it
exerts the maximum pressure on it?. Explain
To exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When a rectangular box is placed on a table, the pressure exerted on the table is the force of the box divided by the area of the bottom of the box in contact with the table. Therefore, to exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When the box is placed on its edge, only a small area of the bottom of the box is in contact with the table, resulting in a higher pressure.
Similarly, when the box is placed on one of its corners, only a single point of the bottom of the box is in contact with the table, resulting in an even higher pressure.
It is important to note that this method of maximizing pressure is not always desirable as it can damage the table or the box. In practical situations, it is recommended to distribute the weight of the box evenly over the surface of the table to avoid damage and ensure stability.
Learn more about pressure at: https://brainly.com/question/28012687
#SPJ11
20 pts) A system is described by the differential equation below and assuming all initial conditions are zero, dy(t) dt dx(t) dt find the transfer function, H(s), Y(s), and y(t) for x(t) = u(t). Is the system stable? d²y(t) dt² +10 ! + 24 y(t) = + x(t)
The transfer function, H(s), and output, Y(s), were found by taking the Laplace transform of the given differential equation and using partial fraction decomposition. The output in the time domain, y(t), was found by taking the inverse Laplace transform. The system is stable because all the poles of the transfer function have negative real parts.
To find the transfer function, H(s), we can take the Laplace transform of the differential equation and rearrange it as follows:
s²Y(s) + 10sY(s) + 24Y(s) = X(s)
H(s) = Y(s)/X(s) = 1/(s² + 10s + 24)
To find Y(s), we can multiply both sides of the transfer function by X(s) and use partial fraction decomposition:
Y(s) = X(s)H(s) = X(s)/(s² + 10s + 24) = A/(s + 4) + B/(s + 6)
where A and B are constants that can be solved for using algebraic manipulation. In this case, we have:
X(s) = 1/s
A/(s + 4) + B/(s + 6) = 1/(s² + 10s + 24)
Multiplying both sides by (s + 4)(s + 6), we get:
A(s + 6) + B(s + 4) = 1
Substituting s = -4, we get:
A = -1/2
Substituting s = -6, we get:
B = 3/2
Therefore, the output Y(s) is:
Y(s) = (-1/2)/(s + 4) + (3/2)/(s + 6)
To find y(t), we can take the inverse Laplace transform of Y(s):
y(t) = (-1/2)e^(-4t) + (3/2)e^(-6t)
The system is stable because all the poles of the transfer function have negative real parts. Specifically, the poles are at s = -4 and s = -6, which correspond to exponential decay terms in the output.
To know more about transfer function, visit:
brainly.com/question/28881525
#SPJ11
A 1.66 kg mass is sliding across a horizontal surface an initial velocity of 10.4 m/s i. If the object then comes to a stop over a time of 3.32 seconds, what must the coefficient of kinetic be? Assume that only friction, the normal force, and the force due to gravity are acting on the mass. Enter a number rounded to 3 decimal places. Question 20 5 pts A mass of 2.05 kg is released from rest while upon an incline of 30.6 degrees. If the coefficient of kinetic friction regarding the system is known to be 0.454, what amount of time will it take the mass to slide a distance of 3.02 m down the incline?
Hence, the amount of time taken by the mass to slide a distance of 3.02 m down the incline is 1.222 seconds (approx).
According to the given problem,Mass, m = 1.66 kgInitial velocity, u = 10.4 m/sFinal velocity, v = 0Time, t = 3.32 sFrictional force, fGravity, gNormal force, NWe need to find the coefficient of kinetic friction, μk.Let's consider the forces acting on the mass:Acceleration, a can be given as:f - μkN = maWhere, we know that a = (v - u)/tPutting the values:f - μkN = m(v - u)/tSince the mass comes to rest, the final velocity, v = 0. Hence,f - μkN = -mu = maPutting the values, we get:f - μkN = -m(10.4)/3.32f - μkN = -31.4024Newton's second law can be applied along the y-axis:N - mgcosθ = 0N = mgcosθPutting the values,N = (1.66)(9.8)(cos 0) = 16.2688 NNow, we need to calculate the frictional force, f. Using the formula:f = μkNPutting the values,f = (0.540)(16.2688) = 8.798 NewtonsNow, we can substitute the values of frictional force, f and normal force, N in the equation:f - μkN = -31.4024(8.798) - (0.540)(16.2688) = -31.4024μk= - 3.3254μk = 0.363 (approx) Hence, the value of coefficient of kinetic friction, μk = 0.363 (approx).According to the given problem: Mass, m = 2.05 kg Inclination angle, θ = 30.6 degrees Coefficient of kinetic friction, μk = 0.454Distance, s = 3.02 mWe need to find the time taken by the mass to slide down the incline. Let's consider the forces acting on the mass: Acceleration, a can be given as:gsinθ - μkcosθ = aWhere, we know that a = s/tPutting the values,gsinθ - μkcosθ = s/tHence,t = s/(gsinθ - μkcosθ)Putting the values,t = 3.02/[(9.8)(sin 30.6) - (0.454)(9.8)(cos 30.6)]t = 1.222 seconds (approx). Hence, the amount of time taken by the mass to slide a distance of 3.02 m down the incline is 1.222 seconds (approx).
To know more about mass visit:
https://brainly.com/question/13210941
#SPJ11
In a particular fission of ²³⁵₉₂U, the Q value is 208 MeV/fission. Take the molar mass of ²³⁵₉₂U to be 235 g/mol. There are 6.02 x 10²³ nuclei/mol. How much energy would the fission of 1.00 kg of this isotope produce?
The energy produced from fission 1.00 kg of 235U is 8.99 kJ. Fission is the process in which a large nucleus divides into two or more fragments. Uranium-235 is the most widely used fissile material, which can undergo a fission reaction.
During the fission of 235U, a Q-value of 208 MeV/fission is generated. In a fission of 235U, the Q value is 208 MeV/fission. The molar mass of 235U is 235 g/mol. 1 mol of 235U contains 6.02 x 10²³ atoms/mol. A single nucleus of 235U produces Q = 208 MeV when fission occurs. The amount of energy generated per mole of 235U fission is calculated below:1 mole of 235U = 235 g = 235/1000 kg = 0.235 kg1 mole of 235U contains 6.02 x 10²³ nuclei Q value per 235U nucleus = 208/6.02 x 10²³ MeV/nucleus Q value per 1 mole of 235U = (208/6.02 x 10²³) x 6.02 x 10²³ = 208 MeV/mol.
Therefore, the energy released per 1 mole of 235U fission is 208 MeV/mol. If 1.00 kg of 235U is fissioned, then the number of moles of 235U will be; Mass of 235U = 1.00 kg = 1000 g, Number of moles of 235U = Mass of 235U / Molar mass of 235UNumber of moles of 235U = 1000 g / 235 g/mol = 4.26 mol. The energy produced from fissioning 1.00 kg of 235U can be calculated as follows: Energy produced = 208 MeV/mol x 6.02 x 10²³ nuclei/mol x 4.26 mol = 5.63 x 10²¹ eV= 8.99 x 10³ J= 8.99 kJ
Answer: The energy produced from fission 1.00 kg of 235U is 8.99 kJ.
Learn more about fission:
https://brainly.com/question/3992688
#SPJ11
A parallel plate capacitor has an area of 0.003 for each of the plates. The distance between the plates is 0.06 mm. The electric field between the plates is 8×10 6
V/m. Find the Capacitance of the capacitor. pF
The capacitance of a parallel plate capacitor is determined by the formula C = ε0 * (A / d).The capacitance of the parallel plate capacitor is 40 pF.
The capacitance of a parallel plate capacitor is determined by the formula C = ε0 * (A / d), where C is the capacitance, ε0 is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.
In this case, the area of each plate is given as 0.003 m², and the distance between the plates is 0.06 mm, which is equivalent to 0.06 * 10^(-3) m. The electric field between the plates is given as 8 * 10^6 V/m.
Using the formula for capacitance, we can calculate the capacitance as C = (8.85 * 10^(-12) F/m) * (0.003 m² / (0.06 * 10^(-3) m)) = 40 pF.
Learn more about capacitance here:
https://brainly.com/question/31871398
#SPJ11
Electromagnetic waves (multiple Choice) Which of these are electromagnetic waves? a. visible light b. TV signals c. cosmic rays d. Radio signals e. Microwaves f. Infrared g. Ultraviolet h. X-Rays 1. gamma rays
The electromagnetic waves among the given options are: a. Visible light b. TV signals d. Radio signals e. Microwaves f. Infrared g. Ultraviolet h. X-Rays
Electromagnetic waves are waves that consist of oscillating electric and magnetic fields. They are produced by the acceleration of electric charges or by changes in the magnetic field. These waves do not require a medium for their propagation and can travel through vacuum. They are characterized by their wavelength and frequency, which determine their properties such as energy and interaction with matter.
Visible light is the portion of the electromagnetic spectrum that is visible to the human eye. It consists of different colors ranging from red to violet, each with a specific wavelength and frequency.
TV signals and radio signals are both forms of electromagnetic waves used for communication. TV signals carry audio and visual information, while radio signals are used for radio broadcasting and communication.
Microwaves are electromagnetic waves with shorter wavelengths than radio waves. They are used for various applications such as cooking, communication, and radar technology.
Infrared, ultraviolet, and X-rays are all part of the electromagnetic spectrum, with infrared having longer wavelengths than visible light, ultraviolet having shorter wavelengths, and X-rays having even shorter wavelengths. They are used in a wide range of applications, including heating, sterilization, imaging, and medical diagnostics.
Cosmic rays, on the other hand, are not electromagnetic waves. They are high-energy particles, such as protons and atomic nuclei, that originate from outer space and can interact with the Earth's atmosphere.
In summary, electromagnetic waves include visible light, TV signals, radio signals, microwaves, infrared, ultraviolet, and X-rays. Each of these types of waves has distinct properties and applications in various fields of science and technology.
Learn more about em waves here:
https://brainly.com/question/30171018
#SPJ11
Find the wavelength of a 10^6 Hz EM wave.
The wavelength of the EM wave is 0.3 meters (or 30 centimeters).
The frequency of an electromagnetic wave is 10⁶ Hz. Find the wavelength of this EM wave.The velocity of light in a vacuum is 3 x 10⁸ m/s.
The formula for the wavelength is given by;
Wavelength (λ) = Speed of light (c) / Frequency (f)
λ = c / f= 3 x 10⁸ m/s / 10⁶ Hz = 300 m/s ÷ 10⁶ Hz= 0.3 meters or 30 centimeters
Therefore, the wavelength of the EM wave is 0.3 meters (or 30 centimeters).
Know more about wavelength here,
https://brainly.com/question/32900586
#SPJ11
Argon gas enters an adiabatic nozzle steadily at 809°C and 690 kPa with a low, negligible velocity, and exits at a pressure of 121 kPa. What is the highest possible velocity of helium gas at the nozz
The highest possible velocity of helium gas at the nozzle exit can be determined using the adiabatic flow equation and the given conditions.
To calculate the highest possible velocity of helium gas at the nozzle exit, we can utilize the adiabatic flow equation:
[tex]\[ \frac{{V_2}}{{V_1}} = \left(\frac{{P_1}}{{P_2}}\right)^{\frac{{\gamma - 1}}{{\gamma}}}\][/tex]
where:
V1 is the initial velocity (assumed to be negligible),
V2 is the final velocity,
P1 is the initial pressure (690 kPa),
P2 is the final pressure (121 kPa),
and γ (gamma) is the specific heat ratio of helium.
Since the specific heats are assumed to be constant, γ remains constant for helium and has a value of approximately 1.67.
Using the given values, we can substitute them into the adiabatic flow equation:
[tex]\[ \frac{{V_2}}{{0}} = \left(\frac{{690}}{{121}}\right)^{\frac{{1.67 - 1}}{{1.67}}}\][/tex]
Simplifying the equation:
[tex]\[ V_2 = 0 \times \left(\frac{{690}}{{121}}\right)^{\frac{{0.67}}{{1.67}}}\][/tex]
As the equation shows, the highest possible velocity of helium gas at the nozzle exit is zero (V2 = 0). This implies that the helium gas is not flowing or has a negligible velocity at the nozzle exit under the given conditions.
To know more about adiabatic flow click here:
https://brainly.com/question/31962287
#SPJ11
The complete question is:
Argon gas enters an adiabatic nozzle steadily at 809°C and 690 kPa with a low, negligible velocity, and exits at a pressure of 121 kPa. What is the highest possible velocity of helium gas at the nozzle exit? Assume constant specific heats. You need to look up properties and determine k for argon. Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point.
Describe the free-body diagram of a block being pushed to the right on a horizontal surface with friction.
The diagram of a block pushed to the right on a horizontal surface with friction is the free-body diagram of the block and described below.
What is free-body diagram?
A free-body diagram is a visual representation of all forces acting on an object. A free-body diagram depicts the forces that are acting on an object, and their respective directions. A free-body diagram depicts all of the forces acting on a block.When a block is pushed to the right on a horizontal surface with friction, there are several forces acting on it.
Let us describe the free-body diagram of a block being pushed to the right on a horizontal surface with friction.
The free-body diagram for the block being pushed to the right on a horizontal surface with friction would be as shown below:
Block Pushed to the Right on a Horizontal Surface with FrictionThe block's weight, which is directed downward, is the gravitational force, Fg. Fn, the normal force, is the force of the surface perpendicular to the block. It is balanced by Fg, which is why the block does not move upward or downward. The force of friction, Ff, opposes the motion of the block and acts parallel to the surface in the opposite direction. Fp, the force applied by the person pushing the block, is directed to the right.Therefore, the above diagram of a block pushed to the right on a horizontal surface with friction is the free-body diagram of the block.
Learn more about the free-body diagram:
brainly.com/question/20360770
#SPJ11
Consider two diving boards made of the same material, one long and one short. Which do you think has a larger spring constant? Explain your reasoning. (4.6) M Interpret, in your own words, the meaning of the spring constant k in Hooke's law. (4.6) C Compare the simple harmonic motion of two identical masses oscillating up and down on springs with different spring constants, k. (4.6) KU G Consider two different masses oscillating on springs with the same spring constant. Describe how the simple harmonic motion of the masses will differ. (4.6) . To give an arrow maximum speed, explain why an archer should release it when the bowstring is pulled back as far as possible
1) When two diving boards are made of the same material, the long diving board will have a larger spring constant than the short diving board. The spring constant is proportional to the stiffness of the material that is being stretched or compressed. The long diving board will bend more and require more force to stretch it compared to the short diving board. Hence, the long diving board will have a larger spring constant.
2) Hooke's law states that the force required to stretch or compress a spring is directly proportional to the distance it is stretched or compressed, provided the spring's limit of proportionality has not been exceeded. The spring constant k is a measure of the stiffness of the spring and is given by the equation F = -kx, where F is the force applied, x is the displacement from the equilibrium position, and k is the spring constant.
3) Two identical masses oscillating up and down on springs with different spring constants will have different amplitudes, frequencies, and periods of oscillation. The mass on the stiffer spring will oscillate with a smaller amplitude, a higher frequency, and a shorter period than the mass on the less stiff spring.
4) Two different masses oscillating on springs with the same spring constant will have different amplitudes, frequencies, and periods of oscillation. The mass that is lighter will oscillate with a larger amplitude, a lower frequency, and a longer period than the mass that is heavier.
5) To give an arrow maximum speed, an archer should release it when the bowstring is pulled back as far as possible because this maximizes the potential energy stored in the bowstring. When the bowstring is released, this potential energy is converted into kinetic energy, which propels the arrow forward. Releasing the bowstring when it is pulled back as far as possible ensures that the arrow will have the greatest possible velocity.
Learn more about hookes law, here
https://brainly.com/question/17068281
#SPJ11
An insulated beaker with negligible mass contains liquid water with a mass of 0.240 kg and a temperature of 65.8 °C How much ice at a temperature of - 10.2°C must be dropped into the water so that the final temperature of the system will be 33.0 °C ? Take the specific heat of liquid water to be 4190 J/kg. K, the specific heat of ice to be 2100 J/kg · K, and the heat of fusion for water to be 3.34x105 J/kg.
Approximately 37.9 grams of ice at -10.2 °C must be dropped into the water to achieve a final temperature of 33.0 °C.
To solve this problem, we need to consider the energy gained or lost by each component of the system and equate it to zero, as the total energy of the system is conserved.
Let's calculate the energy gained or lost by each component step by step:
1. Heat gained by the water to reach the final temperature of 33.0 °C:
Q1 = mass of water × specific heat of water × change in temperature
= 0.240 kg × 4190 J/kg·K × (33.0 °C - 65.8 °C)
= -3439.68 J (negative sign indicates heat lost)
2. Heat lost by the ice to reach the final temperature of 33.0 °C:
Q2 = mass of ice × specific heat of ice × change in temperature
= mass of ice × 2100 J/kg·K × (33.0 °C - (-10.2 °C))
= mass of ice × 2100 J/kg·K × 43.2 °C
3. Heat lost by the ice to melt into water at 0 °C:
Q3 = mass of ice × heat of fusion of water
= mass of ice × 3.34 x [tex]10^5[/tex] J/kg
Now, we can set up the equation:
Q1 + Q2 + Q3 = 0
Substituting the values we calculated earlier:
-3439.68 J + mass of ice × 2100 J/kg·K × 43.2 °C + mass of ice × 3.34x10^5 J/kg = 0
Simplifying the equation, we can solve for the mass of ice:
mass of ice × (2100 J/kg·K × 43.2 °C + 3.34 x [tex]10^5[/tex] J/kg) = 3439.68 J
mass of ice × (90720 J/kg) = 3439.68 J
mass of ice = 3439.68 J / (90720 J/kg)
Calculating the mass of ice:
mass of ice = 0.0379 kg or 37.9 grams
Therefore, approximately 37.9 grams of ice at -10.2 °C must be dropped into the water to achieve a final temperature of 33.0 °C.
To learn more about energy visit:
brainly.com/question/425036
#SPJ11
(a) A hydrogen atom has its electron in the n = 6 level. The radius of the electron's orbit in the Bohr model is 1.905 nm. Find the de Broglie wavelength of the electron under these circumstances.
m?
(b) What is the momentum, mv, of the electron in its orbit?
kg-m/s?
The de Broglie wavelength of the electron under these circumstances is 2.66 x 10^-10 m and the momentum of the electron in its orbit is 1.98 x 10^-24 kg·m/s.
(a) de Broglie's equation states that
λ=h/p
where,
λ is the wavelength
p is the momentum of the particle
h is Planck's constant = 6.626 x 10^-34 J·s
Firstly, we need to find the velocity of the electron in its orbit using the Bohr's model's formula:
v= (Z* e^2)/(4πε0rn)
where
Z=1 for hydrogen,
e is the charge on the electron,
ε0 is the permitivity of free space,
rn is the radius of the orbit
Substituting the given values into the equation,
v = [(1*1.6 x 10^-19 C)^2/(4π*8.85 x 10^-12 C^2 N^-1 m^-2)(6 * 10^-10 m)] = 2.18 x 10^6 m/s
Now, using de Broglie's equation:
λ = h/p
λ= h/mv
Substituting the values in the equation,
λ = 6.626 x 10^-34 J·s/(9.109 x 10^-31 kg) (2.18 x 10^6 m/s)λ= 2.66 x 10^-10 m
Therefore, the de Broglie wavelength of the electron under these circumstances is 2.66 x 10^-10 m.
(b) We have already found the velocity of the electron in its orbit in part (a):
v= 2.18 x 10^6 m/s
Using the formula,
p = mv
The mass of an electron is 9.109 x 10^-31 kg
Therefore,
p = 9.109 x 10^-31 kg (2.18 x 10^6 m/s)
p= 1.98 x 10^-24 kg·m/s
Thus, the momentum of the electron in its orbit is 1.98 x 10^-24 kg·m/s.
Learn more about de Broglie wavelength:
https://brainly.com/question/30404168
#SPJ11
You have a battery of 5 volts, connected by a wire of 3m length, radius of 1m, and resistivity of 2.
a. What is the resistance of the wire?
b. What is the current flowing through the wire?
Area of a circle = pi* r^2
a. The resistance of the wire is 1.909 ohms.
b. The current flowing through the wire is approximately 2.619 amperes.
a. The resistance of the wire can be calculated using the formula:
Resistance = (Resistivity * Length) / Area
In this case, the resistivity is given as 2, the length is 3m, and the radius is 1m. We can calculate the area of the wire using the formula for the area of a circle: Area = π * radius^2.
So, the area of the wire is π * 1^2 = π square meters. Substituting these values into the resistance formula:
Resistance = (2 * 3) / π = 6/π ≈ 1.909 ohms.
b. To calculate the current flowing through the wire, we can use Ohm's Law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R):
Current = Voltage / Resistance.
Given that the voltage is 5 volts and the resistance is approximately 1.909 ohms (from part a), we can substitute these values into the formula:
Current = 5 / 1.909 ≈ 2.619 amperes.
Learn more about resistance of a wire:
https://brainly.com/question/13550678
#SPJ11
As a torque activity, your Physics TA sets up the arrangement shown below. A uniform rod of mass m r
=143 g and length L=100.0 cm is attached to the wall with a pin as shown. Cords are attached to the rod at the r 1
=10.0 cm and r 2
=90.0 cm mark, passed over pulleys, and masses of m 1
=276 g and m 2
=137 g are attached. Your TA asks you to determine the following. (a) The position r 3
on the rod where you would suspend a mass m 3
=200 g in order to balance the rod and keep it horizontal if released from a horizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Use standard angle notation to determine the direction of the force the pin exerts on the rod. Express the direction of the force the pin exerts on the rod as the angle θ p
, measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). r 3
=
F p
=
θ F
=
m
N
=
(b) Let's now remove the mass m 3
and determine the new mass m 4
you would need to suspend from the rod at the position r 4
=20.0 cm in order to balance the rod and keep it horizontal if released from a harizontal position. In addition, for this case, what force (magnitude and direction) does the pin exert on the rod? Express the direction of the force the pin exerts on the rod as the angle θ F
measured with respect to the positive x-axis (counterclockwise is positive and clockwise is negative). m 4
=
F p
=
θ F
=
kg
N
∙
(c) Let's now remove the mass m 4
and determine the mass m 5
you would suspend from the rod in order to have a situation such that the pin does not exert a force on the rod and the location r 5
from which you would suspend this mass in order to balance the rod and keep it horizontal if released from a horizontal position. m 5
=
r 5
=
kg
m
a)The position of r 3 on the rod = 8.8 cm b)The mass of m4 = 0.094 kg or 94 g and c)The mass r5 = 62.4 cm.
(a) When the rod is in a horizontal position, the torque caused by the weight of the hanging weights at r1 is equal to the torque caused by the weight of the hanging weights at r2. When the rod is horizontal, the weights at r1 and r2 pull the rod down, and the pin reacts with an upward force to prevent the rod from falling.
To keep the rod in balance and horizontal when it is released, the weight of the mass m3 should create an upward force of equal magnitude to that of the pin.In order to create a torque of 0, the net force acting on the rod should be zero and the weight of mass m3 should create an upward force of the same magnitude as the pin in the opposite direction.
Therefore, we obtain F p = m g and r3 can be calculated as follows:θp = 0, since the force of the pin is upward and in the positive y-axis direction.r3 = (Fp / m3) L = (mg / m3) L = (0.143 kg)(9.8 m/s²) / (0.200 kg) = 0.088 m = 8.8 cm
(b) When the rod is horizontal, the net torque acting on the rod should be zero.Therefore, the upward force created by the hanging weights at r1 and r2 should be equal and opposite to the downward force created by the weight of the rod and the weight of the hanging mass at r4. Since the mass m4 is closer to the pin, it exerts a greater torque than the mass at r2.
Therefore, the mass of m4 should be less than the mass of m2 to maintain equilibrium.θF = 0, since the force of the pin is upward and in the positive y-axis direction.m4 = (m1r1 + m2r2 - mrL) / (r4 - r1) = [(0.276 kg)(0.100 m) + (0.137 kg)(0.900 m) - (0.143 kg)(1.000 m)] / (0.200 m - 0.100 m) = 0.094 kg or 94 g.
(c) In order for the force of the pin to be zero, the net torque on the rod should be zero.
Therefore, the sum of the torques caused by the weight of the rod and the hanging masses at r1, r2, r5 should be zero.θF = 90°, since the force of the pin is zero and is perpendicular to the rod.m5 = (mr / L) (r1m1 + r2m2) / (m1 + m2) = (0.143 kg / 1.000 m) [(0.100 m)(0.276 kg) + (0.900 m)(0.137 kg)] / (0.276 kg + 0.137 kg) = 0.131 kg or 131 g.r5 = (m1r1 + m2r2 + m4r4 - mrL) / (m1 + m2 + m4) = (0.276 kg)(0.100 m) + (0.137 kg)(0.900 m) + (0.094 kg)(0.200 m) - (0.143 kg)(1.000 m) / (0.276 kg + 0.137 kg + 0.094 kg) = 0.624 m.
Therefore, r5 = 62.4 cm.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
Use the density of strontium (d = 2. 60 g/cm3) to determine the volume in cubic centimeters of a sample that has a mass of 47. 2 pounds
To determine the volume of a sample of strontium with a given mass, we can use the formula:
Volume = Mass / Density
Given:
Density of strontium (d) = 2.60 g/cm^3
Mass of the sample = 47.2 pounds
Before we proceed, let's convert the mass from pounds to grams, as the density is given in grams per cubic centimeter (g/cm^3).
1 pound is approximately equal to 453.592 grams.
Mass of the sample in grams = 47.2 pounds * 453.592 grams/pound
Now, we can calculate the volume using the formula:
Volume = Mass / Density
Volume = (47.2 * 453.592) / 2.60
By performing the calculations, we can determine the volume of the strontium sample in cubic centimeters.
You can learn more about Strontium at
brainly.com/question/1581557
#SPJ11
Two identical point charges are fixed to diagonally opposite corners of a square that is 0.644 m on a side. Each charge is +3.2 x 10^-6 C. How much work is done by the electric force as one of the charges moves to an empty corner?
The work done by the electric force as one of the charges moves to an empty corner is approximately -0.000715 Joules. The negative sign indicates that work is done against the electric force, suggesting an external force is required to move the charge.
To calculate the work done by the electric force as one of the charges moves to an empty corners, let us follow these steps-
- Charge of each point charge: q1 = q2 = 3.2 x 10^-6 C
- Side length of the square: s = 0.644 m
Calculate the initial potential energy (PE_initial):
PE_initial = (8.99 x 10^9 N·m^2/C^2) * (3.2 x 10^-6 C)^2 / (0.644 m)
Calculating PE_initial:
PE_initial = (8.99 x 10^9 N·m^2/C^2) * (10.24 x 10^-12 C^2) / (0.644 m)
PE_initial ≈ 1.428 x 10^-3 J
Calculate the final potential energy (PE_final):
PE_final = (8.99 x 10^9 N·m^2/C^2) * (3.2 x 10^-6 C)^2 / (2 * 0.644 m)
Calculating PE_final:
PE_final = (8.99 x 10^9 N·m^2/C^2) * (10.24 x 10^-12 C^2) / (1.288 m)
PE_final ≈ 2.143 x 10^-3 J
Calculate the change in potential energy (ΔPE):
ΔPE = PE_final - PE_initial
Calculating ΔPE:
ΔPE = 2.143 x 10^-3 J - 1.428 x 10^-3 J
ΔPE ≈ 7.15 x 10^-4 J
Calculate the work done (W):
W = -ΔPE
Calculating W:
W = -7.15 x 10^-4 J
W ≈ -0.000715 J
The work done by the electric force as one of the charges moves to an empty corner is approximately -0.000715 Joules. The negative sign indicates that work is done against the electric force, suggesting an external force is required to move the charge.
Learn more about electric force
https://brainly.com/question/30831445
#SPJ11
In an oscillating LC circuit, L = 1.01 mH and C = 3.96 pF. The maximum charge on the capacitor is 4.08 PC. Find the maximum current Number Units
Answer: The maximum current in the circuit is 325.83 mA.
Step-by-step explanation: From the given, we have,
LC circuit = 1.01 mH
C = 3.96 pF
Maximum charge on the capacitor is q = 4.08 PC. Where, P = pico = 10^(-12)
So, q = 4.08 * 10^(-12)C
The maximum voltage across the capacitor is given as :
q = CV
Where, C = 3.96 * 10^(-12)F and
V = maximum voltage across the capacitor. Putting the given values in above expression, we get;
4.08 * 10^(-12) C = 3.96 * 10^(-12)F * VV = (4.08 / 3.96) volts = 1.03 volts. The maximum current is given by; I = V / XL Where XL = √(L/C) = √[(1.01 * 10^(-3)) / (3.96 * 10^(-12))]I = V / √(L/C) = (1.03 V) / √(1.01 * 10^(-3) / 3.96 * 10^(-12))I = 325.83 mA (milliAmperes).
Therefore, the maximum current in the circuit is 325.83 mA.
Learn more about LC circuit: https://brainly.com/question/15305324
#SPJ11
The temperature is -9 °C, the air pressure is 95 kPa, and the vapour pressure is 0.4 kPa. Calculate the following
a)What is the dew-point temperature?
b)What is the relative humidity? c)What is the absolute humidity?
d)What is the mixing ratio?
e)What is the saturation mixing ratio?
f)Use your answers to d) and e) to recalculate the relative humidity.
The relative humidity is 63.46%. We can recalculate the relative humidity (RH) using the mixing ratio. The relative humidity is given by RH = [(w/ws) × 100%].
a) The dew-point temperature (Td) is the temperature at which the water vapor in the air becomes saturated and begins to condense into liquid water. It is the temperature at which the air becomes fully saturated with water vapor. The dew-point temperature can be calculated using the Clausius-Clapeyron equation:
Td = [B / (A - log e)]
Where A and B are constants for water, and e is the vapor pressure in kilopascals. Given the temperature of the air (T = -9 °C) and water vapor pressure (e = 0.4 kPa), we can calculate the dew-point temperature as Td = -13.87 °C.
b) The relative humidity (RH) is the ratio of the amount of water vapor in the air to the amount of water vapor the air can hold when it is saturated at a particular temperature. It is expressed as a percentage. The relative humidity can be calculated using the actual vapor pressure (e) and the saturation vapor pressure (es) at the given temperature. Given the actual vapor pressure (e = 0.4 kPa), we can calculate the saturation vapor pressure (es) using the equation es = [610.78 * exp((-9 * 17.27)/(237.3 - 9))] = 1.91 kPa. The relative humidity is RH = [(0.4/1.91) × 100%] = 20.94%.
c) The absolute humidity (Ah) is the mass of water vapor per unit volume of air. It represents the total amount of water vapor present in the air and is expressed in grams of water vapor per cubic meter of air. The absolute humidity can be calculated using the actual vapor pressure (e) and the temperature (T). Given the actual vapor pressure (e = 0.4 kPa) and temperature (T = -9 °C), we can calculate the absolute humidity as Ah = [(0.4 * 1000)/(0.287 * (264.15))] = 4.37 g/m³.
d) The mixing ratio (w) is the ratio of the mass of water vapor to the mass of dry air in a sample of air. It is a measure of the moisture content in the air. The mixing ratio can be calculated using the actual vapor pressure (e), the total pressure (p), and a constant ratio. Given the actual vapor pressure (e = 0.4 kPa) and total pressure (p = 95 kPa), we can calculate the mixing ratio as w = [(0.622 * 0.4)/(95 - 0.4)] = 0.0033 kg/kg.
e) The saturation mixing ratio (ws) is the maximum amount of water vapor that the air can hold at a given temperature. It is the ratio of the mass of water vapor in the air to the mass of dry air when the air is saturated. The saturation mixing ratio can be calculated using the saturation vapor pressure (es), the temperature (T), and a constant ratio. Given the saturation vapor pressure (es = 1.91 kPa) and temperature (T = -9 °C), we can calculate the saturation mixing ratio as ws = [(0.622 * es)/(95 - es)] = 0.0052 kg/kg.
f) Using the values from parts d) and e), we can recalculate the relative humidity (RH) using the mixing ratio. The relative humidity is given by RH = [(w/ws) × 100%]. Using the mixing ratio (w = 0.0033 kg/kg) and the saturation mixing ratio (ws = 0.0052 kg/kg), we can calculate the relative humidity as RH = [(0.0033/0.0052) × 100%] = 63.46%.
Therefore, the relative humidity is 63.46%.
Learn more about humidity
https://brainly.com/question/30672810
#SPJ11
A ball is fired from a launcher with an initial velocity of v. at an angle of 30° to the horizontal. The ball reaches a maximum vertical height of 51 m. 3.1 Determine Vo. 3.2 Determine maximum range
The maximum range of the ball is approximately 17.8 meters. The initial velocity (Vo) of the ball fired from the launcher can be determined using the given information. The maximum range of the ball can also be calculated.
1. Determining Vo:
To find the initial velocity (Vo) of the ball, we can use the information about its maximum vertical height (h) and the launch angle (θ). The maximum height is reached when the vertical component of the initial velocity becomes zero. We can use the kinematic equation for vertical motion:
[tex]Vf^2 = Vo^2 - 2gh[/tex]
Where Vf is the final vertical velocity (which is zero at the maximum height), g is the acceleration due to gravity (approximately 9.8 m/s^2), and h is the maximum height (51 m). Rearranging the equation, we have:
[tex]Vo^2 = 2gh[/tex]
[tex]Vo^2 = 2 * 9.8 * 51[/tex]
[tex]Vo^2 ≈ 999[/tex]
[tex]Vo ≈ √999[/tex]
[tex]Vo ≈ 31.6 m/s[/tex]
Therefore, the initial velocity of the ball is approximately 31.6 m/s.
2. Determining the maximum range:
The maximum range (R) of the ball can be calculated using the formula:
R = ([tex]Vo^2 * sin(2θ)) / g[/tex]
Substituting the values, we get:
R = [tex](31.6^2 * sin(2 * 30°)) / 9.8[/tex]
R = [tex](999 * sin(60°)) / 9.8[/tex]
R ≈ [tex](999 * √3/2) / 9.8[/tex]
R ≈ 17.8 m
Hence, the maximum range of the ball is approximately 17.8 meters.
Learn more about kinematic equation here:
https://brainly.com/question/24458315
#SPJ11
where are Ascaris and Arthropods found ?class 10
Answer:
Ascaris and Arthropods are both types of organisms found in the animal kingdom. Ascaris are parasitic worms, commonly referred to as roundworms, which can be found in warm climates all over the world. Arthropods, on the other hand, are a large group of animals, including insects, arachnids, and crustaceans, that typically have jointed legs and a hard exoskeleton. Arthropods are found in almost all environments, from oceans to deserts to the tops of mountains.
Explanation:
vector A is defined as: A=−5.94i^+−8.99j^. What is Ay, the y-component of A ? Round your answer to two (2) decimal places. If there is no solution or if the solution cannot be found with the information provided, give your answer as: −1000
Answer: The y-component of vector A is `-8.99`.Hence, Ay = -8.99.
The components of a vector in two dimension coordinate system are usually considered to be x-component and y-component. It can be represented as, V = (vx, vy), where V is the vector. These are the parts of vectors generated along the axes.
Given vector `A = -5.94i^ - 8.99j^`.
To find the y-component of the vector A, we need to find the coefficient of `j^`.
The coefficient of `j^` is `-8.99`.
Therefore, the y-component of vector A is `-8.99`.Hence, Ay = -8.99.
Learn more about vector : https://brainly.com/question/28028700
#SPJ11
Last 6 digits will be used as data Example ID Your ID 011 011 011 Rxx XX Ryy yy Rzz ZZ
3. Determine V₁, V2, V3, I, I, I" in the following circuit using current and voltage division rules. Also calculate the value of L in H and C in F. [5] vs(t) = 75cos(Rxx x 5t) V 492 0.01 F www j252 + V₂ - m L 392 2 H I' V₁ -j692 P+ V/3 392 "I" 30.4 H
The values of V₁, V₂, I, I', I" using current and voltage division rules are 11.5cos(45 x 5t) V, 44.14cos(45 x 5t) V, 29.35cos(45 x 5t) mA, 63.75cos(45 x 5t) mA, 4.40cos(45 x 5t) mA, respectively. The value of L is 0.135 H and the value of C is 9.95 x 10⁻⁶ F.
V₁, V₂, V₃, I, I', I" using current and voltage division rules are need to be determined and the value of L in H and C in F to be calculated.
Given voltage is vs(t) = 75cos(Rxx x 5t) V.
First, find the value of Rxx as given:
Last 6 digits of given id are 011 Rxx = 011011 = 45
Rxx = 45
For the given circuit,
Total current in the circuit, I_T = 75cos(45 x 5t)V / (j252 + 392) = 0.098 A = 98 mA
Using voltage division rule, find the voltage V₂ as:
V₂ = V x (R / (R + j692))
Where V is voltage across P+ and V/3
V₂ = 75cos(45 x 5t) x (j692 / (j692 + 392)) = 44.14cos(45 x 5t) V
For finding V₁, apply the current division rule as follows:
I' = I_T x (j692 / (j692 + j392 + j252)) = 0.0455 mA
And,
I" = I_T x (j392 / (j692 + j392 + j252)) = 0.0525 mA
Using voltage division rule for I₂,
V₁ = I' x j252 = 11.5cos(45 x 5t) V
Find the value of I₁ using Ohm's law as follows:
I = V₁ / 392 = 29.35cos(45 x 5t) mA
And,
I' = V₂ / j692 = 63.75cos(45 x 5t) mA
And,
I" = I_T - (I + I') = 4.40cos(45 x 5t) mA
Let's calculate the values of L and C.
Let ω be the angular frequency of the given voltage.
ω = 5 x 45 = 225 rad/s
Inductive reactance, XL = ωL
So, L = XL / ω = 30.4 / 225 = 0.135 H
Capacitive reactance, XC = 1 / (ωC)
So, C = 1 / (XC x ω) = 1 / (492 x 225) = 9.95 x 10⁻⁶ F
Thus, the value of L is 0.135 H and the value of C is 9.95 x 10⁻⁶ F.
Learn more about voltage: https://brainly.com/question/1176850
#SPJ11
The first law of thermodynamics is AU--W+0. We here consider an ideal gas system which is thermally isolated from its surrounding, that is o-o always holds (there is no heat transfer). Now after this ideal gas system expands (volume increases), its temperature: A keeps unchanged B. decreases. increases. D. None of the above,
The first law of thermodynamics is AU--W+0. We here consider an ideal gas system which is thermally isolated from its surrounding, that is o-o always holds (there is no heat transfer). Now after this ideal gas system expands (volume increases), its temperature decreases.
Thermal expansion is a natural process where the volume of a substance changes due to temperature changes, and it occurs when the volume of an object increases due to an increase in temperature. According to the first law of thermodynamics, the internal energy of a system changes due to heat transfer and work done.
The first law of thermodynamics, also known as the law of conservation of energy, is based on the notion that the total energy of an isolated system remains constant. The energy cannot be created or destroyed, but it can be transformed from one form to another. Heat can be produced by doing work, and work can be done by adding heat to a system.
In this particular scenario, the ideal gas is thermally isolated from its surroundings, which means that there is no heat transfer. As a result, the first law of thermodynamics can be rewritten as
dU = dW.
Here, dU is the change in internal energy, and dW is the work done by the system.
When an ideal gas system expands (volume increases), the work done by the system is positive, and the internal energy decreases. As a result, the temperature decreases. The correct option is B. The temperature decreases.
Learn more about first law of thermodynamics here
https://brainly.com/question/26035962
#SPJ11
A single-silt diffraction pattem is formed when light of λ=576.0 nm is passed through a narrow silt. The pattern is viewed on a screen placed one meter from the slit. What is the width of the slit (mm) if the width of the central maximum is 2.37 cm ?
The width of the slit is 9.68 × 10⁻⁴ mm.
A single-slit diffraction pattern is formed when the light of λ=576.0 nm is passed through a narrow slit. The pattern is viewed on a screen placed one meter from the slit.
The width of the slit (mm) is to be determined if the width of the central maximum is 2.37 cm.
The formula for calculating the width of the central maximum is given as:
Width of the central maximum = 2λD/dHere, λ = 576.0 nm = 576.0 × 10⁻⁹ mD = width of the slit to be determined
D = width of the central maximum = 2.37 cm = 2.37 × 10⁻² mD = 1 m
Substituting the values in the above formula: 2.37 × 10⁻² = (2 × 576.0 × 10⁻⁹ × 1)/d1.185 × 10⁹/d = 2.37 × 10⁻²d = (2 × 576.0 × 10⁻⁹ × 1)/1.185 × 10⁹d = 9.68 × 10⁻⁷ m
The width of the slit in millimeters can be obtained by converting the result into millimeters as shown below:d = 9.68 × 10⁻⁷ m = 9.68 × 10⁻⁴ mm
Therefore, the width of the slit is 9.68 × 10⁻⁴ mm.
To learn about width here:
https://brainly.com/question/1578168
#SPJ11
A 189-turn circular coil of radius 3.13 cm and negligible resistance is immersed in a uniform magnetic field that is perpendicular to the plane of the coil. The coil is connected to a 17.7Ω resistor to create a closed circuit. During a time interval of 0.193 s, the magnetic field strength decreases uniformly from 0.643 T to zero. Find the energy E in millijoules that is dissipated in the resistor during this time interval. E= mJ
The energy dissipated in the resistor during the time interval is approximately 1.118 millijoules (mJ).
The energy dissipated in a resistor can be calculated using the formula E = I^2RΔt, where E is the energy, I is the current, R is the resistance, and Δt is the time interval. First, we need to calculate the current in the circuit. The current can be found using Ohm's Law: I = V/R, where V is the voltage. In this case, the voltage across the resistor is induced by the changing magnetic field.
To find the induced voltage, we can use Faraday's Law of electromagnetic induction: ε = -N(dΦ/dt), where ε is the induced voltage, N is the number of turns in the coil, and dΦ/dt is the rate of change of magnetic flux. Since the magnetic field strength decreases uniformly from 0.643 T to zero over a time interval of 0.193 s, we can calculate the rate of change of magnetic flux.
The magnetic flux through the coil is given by Φ = BA, where B is the magnetic field strength and A is the area of the coil. Substituting the given values, we get Φ = 0.643 T * π * (0.0313 m)^2. Taking the derivative of the magnetic flux with respect to time, we find dΦ/dt = (0 - 0.643 T) / 0.193 s.
Now we can calculate the induced voltage: ε = -189 * (0.643 T / 0.193 s). Finally, we can calculate the current: I = ε / R = (-189 * (0.643 T / 0.193 s)) / 17.7 Ω. Substituting the values into the energy dissipation formula, we get E = I^2RΔt = ((-189 * (0.643 T / 0.193 s)) / 17.7 Ω)^2 * 17.7 Ω * 0.193 s, which is approximately 1.118 mJ.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11