a gas occupies a volume of 95 mL when the pressure is 400 mmHg .what volume does the gas occupy at 1200 mmhg if the temperature

Answer: steaks

Explanation:

the mass of nitric oxide produced by the reaction of 8.4 g of oxygen gas is 4.32 g. ammonia chemically reacts with oxygen gas to produce nitric oxide and water.

Common uses of oxygen include production of steel, plastics and textiles, brazing, welding and cutting of steels and other metals, rocket propellant, oxygen therapy, and life support systems in aircraft, submarines, spaceflight and diving.

Oxygen helps organisms grow, reproduce, and turn food into energy. Humans get the oxygen they need by breathing through their nose and mouth into their lungs. Oxygen gives our cells the ability to break down food in order to get the energy we need to survive.

To know more about oxygen visit

#SPJ1

Answer:

257.6 grams

Explanation:

first write the formula: 4Fe + 3O2 -> 2Fe2O3

Fe molar mass is 55.8

180/55.8 = 3.226 mols

devide 3.226 by 4, then multiply by 2 which gives us 1.61 mols Fe2O3

Fe2O3 molar mass is 160

1.61 mols * 160 = 257.6 grams

Answer:

om pH

The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH) Example: What is the hydronium ion concentration in a solution that has a pH of 8.34?

Explanation:

Answer: 0.5

Explanation:

Answer:

1. mAl₂O₃ = 6.42 g

2. O₂

3. Al.

4. mAl = 1.67 g

Explanation:

Let's calculate the moles of Al and O2 first before doing any other calculations. The molecular weights of Al and O are 26.98 g/mol and 16 g/mol, so the moles are:

moles = mass / Atomic weight or molar mass

moles Al = 4.2 / 26.98 = 0.156 moles

moles O2 = 3 / (2*16) = 0.094 moles

The molar mass of Al2O3 is:

MM = (2 * 26.98) + (3*16) = 101.96 g/mol

With these data, let's determine each part:

1, 2 and 3. Grams of Al2O3, limiting and excess reactant:

To do this, we need to know which is the limiting reactant. this reactant will tell us how many moles are produced of Al2O3 and then, with the previously calculated molar mass, we can determine its mass. Let's see again the overall reaction taking place:

4Al + 3O₂ ---------> 2Al₂O₃

According to this reaction, 4 moles of Al reacts with 3 moles of oxygen, so:

If:            4 moles Al ---------> 3 moles O₂

Then:      0.156 moles ----------> X

X = 0.156 * 3/4 = 0.117 moles of O₂ required.

However, we do not have 0.117 moles of O₂, we have 0.094 moles, therefore we can conclude that the oxygen is the limiting reactant and Aluminum is the excess reactant.

Now, the moles produced of Al₂O₃ will be:

3 moles O₂ -------> 2 moles Al₂O₃

0.094 moles -------> Y

Y = 0.094 * 2/3 = 0.063 moles of Al₂O₃

Finally the mass would be:

mAl₂O₃ = 0.063 * 101.96

4. mass of excess reactant:

The mass of excess reactant would be:

moles Al = 0.156 - 0.094 = 0.062 moles

mAl = 0.062 * 26.98

Hope this helps

According to the ideal gas law, 4.30 molecule of o2 occupies 0.11 m³ at 99.7 kPa with 35.0 °C.

The relationship between a gas's pressure P, volumes V, and t in the range between low pressures and extremely high temperatures, when the gas's water moves virtually independently of one another, is known as the ideal gas, also known as the perfect gas law.

PV = nRTp = pressure in PaV

= volume in m³n = number of molesR

= molar gas constant (8.31 JK⁻¹mol⁻¹)T

= temperature in Kpressure ⇒ 99.7 × 10³ Pa

temperature ⇒ 35.0 + 273 = 308

KpV = nRT

= 99.7×10³×V= 4.30×8.31×308V

=(4.30×8.31×308)/(99.7×10³3 )V

= 0.11 m­³

To know more about Ideal gas law visit:

brainly.com/question/13821925

#SPJ1

Explanation:

I)reaction between potassium paramagnet with H2 forms MnO2

Answer:

Al(OH)3 (s) + 3H+ (aq) → 3H2O (l) + Al3+ (aq)

Explanation:

The net ionic equation for the reaction between solid Al(OH)₃ and aqueous nitric acid, HNO₃ is

The reaction between Al(OH)₃ and HNO₃ will proceeds as follow:

HNO₃ (aq) —> H⁺(aq) + NO₃¯(aq)

HNO₃ (aq) + Al(OH)₃ (s) —>

H⁺(aq) + NO₃¯(aq) + Al(OH)₃ (s) —> H₂O(l) + NO₃¯(aq) + Al³⁺(aq)

Cancel the spectator ion (i.e NO₃¯)

H⁺(aq) + Al(OH)₃ (s) —> H₂O(l) + Al³⁺(aq)

Write 3 before H⁺ and H₂O to obtain the balanced ionic equation as shown below:

3H⁺(aq) + Al(OH)₃ (s) —> 3H₂O(l) + Al³⁺(aq)

Learn more: https://brainly.com/question/21280827

Some examples of molecules that are antigenic may be proteins and or polysaccharides in the cell wall of pathogenic bacteria which may be targeted by the immune system during the production of antibodies.

The relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the fact that antigens are biomolecules in the pathogens that can be targeted to bond antibodies that are produced by the organism in immune responses against bacteria, viruses, and allergens in the air and foods, etc.

Therefore, with this data, we can see that antigen molecules be any type of biomolecule present in the pathogen and the relationship between antigens in pathogenic bacteria and antibodies of the immune system is based on the binding between them (antigens and antibodies) which is fundamental during certain specific immune responses.

Learn more about antigens here:

https://brainly.com/question/7597406

#SPJ1

Answer

I'm pretty sure it would be (Insects, and microorganisms)

Explanation:

If its not correct I'm sry

Answer:

it would be Insects, and microorganisms

Explanation:

I finished the quiz minute ago

Based on the formula to determine the freezing point depression of the solvent, the freezing point of the solution is 263.85 K.

The freezing point of a substance is the temperature at which the liquid changes to solid without any further decrease in temperature occurring during the process.

The addition of solute substances in liquids usually lowers the freezing point of the liquid solvent.

The formula to determine the freezing point depression of solvent is given below:

where'

The molality of the given solution = moles of solute/kg of solvent

moles of solute = 46/92

mass of solvent = 100 g or 0.1 kg

Molality of solution = (46/92) / 0.1

Molality of solution = 5

for glycerine, i = 1

ΔT = ΔT = 1 * 1.86 * 5

ΔT = 9.3

The freezing point of the solution = 273.15 - 9.3

The freezing point of the solution = 263.85 K

Learn more about freezing point depression at: https://brainly.com/question/30093044

#SPJ1

Answer: alkyl halide

Explanation: brianlist please?

The temperature at which a solid transforms into a liquid at atmospheric pressure is referred to as the liquid’s melting point.

The fact that water boils at a greater temperature than fluorine makes option C the correct choice. The melting point of water is zero degrees Celsius (32 degrees F). Depending on the atmospheric pressure, different amounts of water will boil at different temperatures. When purified water reaches its boiling point at sea level, it does so at 212 degrees Fahrenheit (100 degrees Celsius).

Compared to fluorine, water has a greater boiling point. Regarding the melting and boiling points of water and fluorine molecules, this statement is accurate.

The temperature at which a substance's solid and liquid phases are in equilibrium is known as its melting point. A temperature at which a substance's vapour pressure reaches its boiling point.

To learn more about melting and boiling points refer to:

https://brainly.com/question/28353842

#SPJ1

Statement C; They are 0°F and 100°F, respectively, correctly describes the melting and boiling points of water. But Instead of F it should be degree Celsius.

To know more about melting point visit

https://brainly.com/question/29138757

#SPJ1

Answer:

12.18 cc

Explanation:

From the question given above, the following data were obtained:

Density = 1.56 g/cc

Mass = 19 g

Volume =?

The density of a substance can be defined as the mass per unit volume of the substance. Mathematically, it can be expressed as:

Density = mass / volume

With the above formula, we can obtain the volume of the sucrose as follow:

Density = 1.56 g/cc

Mass = 19 g

Volume =?

Density = mass / volume

1.56 = 19 / volume

Cross multiply

1.56 × volume = 19

Divide both side by 1.56

Volume = 19 / 1.56

Volume = 12.18 cc

Therefore, the volume occupied by the sucrose is 12.18 cc

Answer:

The minimum amount of NaOH(aq) solution needed to add is 0.0560 L. This can be calculated by using the following equation:

Moles of Cd2+ = 0.0220 M x 0.300 L = 0.0066 mol

Moles of NaOH = 0.0066 mol x 2 = 0.0132 mol

Volume of NaOH = 0.0132 mol/1.25 M = 0.0560 L

Explanation:

Mass percent of a compound=(mass of element in molecule/total mass of compound)×100  (a) 63.64%

We use the concept of mass percentage composition to explain the concentration of an element in a compound or a component in a combination. This word refers to the overall percent by mass of each element present in a compound.

In chemistry, a compound's percent composition is calculated by dividing its total amount of each elements by the compound's total amount, multiplied by 100. The following formula determines an element's percentage composition:

(gE/gT) = %CE 100

Here, %CE stands for the element's composition in percent.

How to calculate the percentage of each element by mass makes up each compound?

To get the mass percent of an element in a compound, multiply the result by 100 after dividing the mass of the element in 1 mole of the compound by the compound's molar mass.

Calculating total mass of HNO3

= 1 x 1 + 14 x 1 + 16 x 3

= 1 + 14 + 48

= 63

Calculating the mass percentage of Nitrogen in HNO3

= 1/63 x 100

= 1.586 %

To know more about Mass percent composition of nitrogen refer to:

brainly.com/question/10395703

#SPJ1

Answer:

it should be chlorine gas

Explanation:

Answer:

Explanation:

Concentration of Hg⁺² = 7.36 x 10⁻⁴ M

Concentration of Al⁺³ = 1.05 M

2Al + 3Hg⁺² = 2Al⁺³ + 3Hg .

E = E₀ + RT / nF ln [ Al⁺³]² / [ Hg⁺² ]³

E₀ = reduction potential of  Hg⁺² minus reduction potential of  Al⁺³

= 0.92 V - ( - 1.66 V )

= 2.58 V

E = 2.58  + .059 /n  log  [ Al⁺³]² / [ Hg⁺² ]³

n = 6 , [Al⁺³] = 1.05 M ; [Hg⁺²] = 7.36 x 10⁻⁴ M

E = 2.58  + .059 /6  log  [ 1.05]² / [ 7.36 x 10⁻⁴ ]³

= 2.58  + .059 /6  log  27.65 x 10⁸ .

= 2.58  + .059 /6  [8+ log  27.65 ].

= 2.58  + .059 /6  [8+ log  27.65 ].

= 2.58  + .09

= 2.67 V .

Answer:

She should expect for the scale to say 145 grams.

Explanation:

Limestone is mostly made up of the mineral calcium carbonate (CaCO3). But if you add an acid, you add hydrogen ions (H+), which will react with the carbonate to form hydrogen carbonate HCO3- ions, which are very soluble in water, and the limestone will dissolve. So, if you add 100+45 you get 145.

Answer:

B. Heat the solution, dissolve the solute, and let the solution cool verifying nothing settled out.

Explanation:

To dissolve more solute, the solution has been heated at a high temperature, and the cooling has been observed to verify proper dissolution.

The solubility of the compound has been the ability of the solvent to dissolve the solute molecules.  For the solution formation, the intermolecular forces between the solute molecules have been broken in order to sustain the interaction between the solute and the solvent molecules,

The interaction between solute and solvent molecules results in the dissolution of the solute in the solvent.

When Gunther dissolves the 34 grams, of solute, the energy of the solvent molecules has been enough to break the solute interactions and dissolve the solute molecules.

However, in order to dissolve more molecules, the solvent molecules are provided with the energy that has been able to increase the kinetic energy of the solvent for the dissolution of more solute.

The kinetic energy of the solvent has been increased with the increase in the temperature, thereby adding to the more dissolution of the solute.

Thus, to dissolve more solute in the solvent, the solution has been heated at a high temperature, and the cooling has been observed to verify the absence of precipitate thereby proper dissolution.

For more information about the dissolution of solute into solvent, refer to the link:

https://brainly.com/question/14281527

Answer:

K3[Al(C2O4)3] is the answer

The lower bond energy of the silicanes make them more reactive than the alkanes.

We know that the members of group four has the ability to catenate and this is a property that characterizes all the elements that we can find in the group. However the extent to which the members of the group can be able to catenate is what we use to determine the stability of the bonds.

The alkanes are composed of the bonds that exist between carbon and hydrogen and the alkanes can be able to form very long chains and this can be used to explain the fact that you can be able to find the alkanes in various kinds of applications.

However, the bond energy of the silicanes is less than that of the alkanes hence they tend to be more reactive  then the alkanes.

Learn more about alkanes:https://brainly.com/question/3648919

#SPJ1

Answer:mmhm

Explanation:

mhhm

Answer:

do u want the answer now?

Answer:

A solute and a solvent mixed together.

Explanation:

A solution is a solute and a solvent mixed together. An example would be salt water. Salt would be the solute (the thing that's getting dissolved) and water would be the solvent (the thing that does the dissolving)

Answer:

:) Here

Explanation:

Answer:

C

Explanation:

Answer:

C

Explanation:

The specific place where an organism lives is called its habitat.

Answer:

Explanation:

Combustion.  Have fun with that.

Answer:

Q1) Distillation relies on evaporation to purify water

Explanation:

contaminated water is heated to form steam. inorganic compounds and large non-volatile organic molecules do not evaporate with the water and are left behind. The steam then cools and condenses to form purified water