The acceleration is still -9.81 m/s2, and the instantaneous velocity of the shuttlecock when it hits the ground is [tex]V_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]
Acceleration is determined as the rate of change of velocity of an object with respect to time. Acceleration is represented by the SI unit is meter per second squared (m/[tex]s^{2}[/tex]). Acceleration is denoted by "a".
Instantaneous velocity is the rate of change of position for a time interval which is almost zero (very small). The magnitude of the instantaneous velocity is instantaneous speed. It is measured by using SI unit m/s.
Mathematically, the equation for acceleration is:
a = [tex]v\frac{dv}{dt}[/tex]
ah = [tex]v^{2}[/tex] - [tex]u^{2}[/tex]
Where the acceleration is still -9.81 m/s2
Hence, [tex]v^{2}[/tex] - [tex]u^{2}[/tex] = 2 (-9.81) * -H
Therefore, [tex]v_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]
To know more about acceleration here
https://brainly.com/question/12550364
#SPJ4
A class
A class
A class
-
-
lever never has a mechanical advantage.
lever always has a mechanical advantage.
lever could go either way. (1 point)
O 2; 3; 1
O 2; 1; 3
O 1; 2; 3
O3; 2; 1
The correct answer is 1; 2; 3. Lever can either have a mechanical advantage or no mechanical advantage, depending on the lever's mechanical design.
What is mechanical design?Mechanical design is the process of taking a product from concept to reality. Through this process, engineers analyze, design, and manufacture components and systems that are used in a variety of industries. Mechanical design involves a broad range of skills, including mathematics, engineering, physics, and computer-aided design (CAD) software. The process begins with the understanding of the problem and the requirements of the design. From there, engineers must select the best materials, create a detailed design, and simulate the design in a virtual environment. After the design is complete, engineers then use the principles of manufacturing to produce the components through machining, molding, and other processes.
If the lever is designed with a long arm and a short arm, it can have a mechanical advantage. If the lever is designed with two arms of equal length, it will not have a mechanical advantage.
To learn more about mechanical design
https://brainly.com/question/30085844
#SPJ1
Answer:
(Question)
A class __ lever never has a mechanical advantage.
A class __ lever always has a mechanical advantage.
A class __ lever could go either way.
(Answer)
3;2;1
(Question)
A lever is used to lift an object with a weight of 60 Newtons. The effort force is 15 meters from the fulcrum, while the load force is 5 meters from the fulcrum. What is the mechanical advantage?
(Answer)
3
(Question)
With which class of levers is it possible to increase the force that must be applied?
(Answer)
class 1 and 3
(Question)
600 Joules of work is used to lift a box from the ground to a height of six meters. How much work would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters?
(Answer)
600 J
(Question)
A lever with an effort arm of 10 meters and a load arm of 2 meters is used to lift an object weighing 220 Newtons to a height of 4 meters. If 400Joules of work is done, how much force must have been applied?
(Answer)
100 N
Explanation:
i just finished the quick check UwU
is ammonia a substance
Answer:
yes
Explanation:
it is regulated in United States that is non flamable gas
A sound wave is incident on a pool of fresh water (25 °C). The sound enters the water perpendicularly and
travels a distance of 0.45 m before striking a 0.15-m-thick copper block lying on the bottom. The sound passes
through the block, reflects from the bottom surface of the block, and returns to the top of the water along the
same path. How much time elapses between when the sound enters and when it leaves the water?
Answer:
0.67 ms
Explanation:
The total time it takes the sound to enter and leave the water is t and
t = t' + t" where t' = total time of sound in air = d'/v' where d' = total distance sound travels in water = 2D (since the sound waves passes through the water twice )where D = distance travelled from water to surface of copper block = 0.45 m and v' = speed of sound in water = 1500 m/s and t" = total time of sound in copper = d"/v" where d" = total distance sound travels in copper block = 2D' (since the sound waves passes through the copper block twice )where D' = thickness of copper block = 0.15 m and v" = speed of sound in water = 4600 m/s
So, t = t' + t"
t = d'/v' + d"/v"
t = 2D/v' + 2D'/v"
Substituting the values of the variables into the equation, we have
t = 2 × 0.45 m/1500 m/s + 2 × 0.15 m/4600 m/s
t = 0.90 m/1500 m/s + 0.30 m/4600 m/s
t = 0.0006 s + 0.000065 s
t = 0.000665 s
t = 0.665 ms
t ≅ 0.67 ms
Note that the sound wave passes through the water and copper block without refracting since it enters perpendicularly. Also, the sound wave passes twice through each of the copper block and water hence the total distance in each material is twice the initial distance or thickness.
Answer:
t = 6.63 10⁻⁴ s
Explanation:
The speed of sound is constant in a given material medium, so to calculate time we can use the uniform motion relationships
v = d / t
t = d / v
the speeds of sound in the three media are
air v = 343 m / s
water v₁ = 1493 m / s
copper v₂ = 5010 m / s
the distance traveled in the water on the round trip is
d = 2 x
d₁ = 2 0.45 0.90m
the time to travel this distance is
t₁ = d₁ / v₁
t₁ = 0.9 / 1493
t₁ = 6.028 10⁻⁴ s
the distance in the copper
d₂ = 2 0.15 m
d₂ = 0.30 m
the time to travel this distance in copper is
t₂ = d₂/ v₂
t₂ = 0.30 / 5010
t₂ = 5.988 10⁻⁵-5 s
the total travel time is
t = t₁ + t₂
t = 6.028 10⁻⁴ + 0.5988 10⁻⁴
t = 6.6268 10⁻⁴ s
t = 6.63 10⁻⁴ s
What is the acceleration when t 0?
The acceleration of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction. Acceleration of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of wee can calculate. Hence by the primary information that we have we can formerly consider that the acceleration which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.
Learn more about Acceleration:
brainly.com/question/21509870
#SPJ4
A twenty-acre park was created to give residents a place to hike, bike, and enjoy other recreational activities. Kathy was hired to design a map that would show residents how they could easily access different areas of the park. Sean was hired to monitor the number of visitors they have per month and analyze the park’s popularity for funding possibilities. Joan was hired to offer assistance and teach residents about the plants and animals they may encounter while at the park.
Which best describes the tasks Kathy, Sean, and Joan perform?
Kathy and Joan perform tasks common to the Engineering and Technology pathway and Sean performs tasks common to the Science and Math pathway.
Kathy performs tasks common to the Engineering and Technology pathway and Sean and Joan perform tasks common to the Science and Math pathway.
Sean performs tasks common to the Engineering and Technology pathway and Kathy and Joan perform tasks common to the Science and Math pathway.
Sean and Joan perform tasks common to the Engineering and Technology pathway and Kathy performs tasks common to the Science and Math pathway.
Answer:
park’s popularity for funding possibilities. Joan was hired to offer assistance and teach residents about the plants and animals they may encounter
Answer:
B on edge 2021
Explanation:
Kathy performs tasks common to the Engineering and Technology pathway and Sean and Joan perform tasks common to the Science and Math pathway.
for what emf e does the 200ω resistor in the following figure dissipate no power if δv = 150 v ?
The total power dissipated by the resistor is 150 V x 1.33 A = 199.5W.
Since the voltage of the battery is 150 volts, and the resistance of the resistor is 200ω, then the current through the resistor is equal to 150V/200ω = 1.33 A.
As a result, the resistor dissipates a total of 150 V x 1.33 A = 199.5 W of electricity.
Power in physics is the amount of energy that is transferred and converted in a given amount of time. The International System of Units uses the watt, or one joule per second, as the unit of power. In older texts, power is frequently referred to as activity. Power is a scalar quantity.
Other aspects have been linked to power; for example, the product of a ground vehicle's velocity, traction force on its wheels, and aerodynamic drag equals the power needed to propel the vehicle.
Learn more about power .
https://brainly.com/question/29680450
#SPJ4
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called:
The distance your vehicle travels from the time the eyes see a hazard to the time the brain knows it's a hazard is called perception distance.
Distance perception refers to a process in which a viewer perceives an interval between two points in space. Perception distance is the distance a vehicle travels from the moment you see a hazard until your brain recognizes it. For an alert driver, this is about 3/4 of a second. The velocity of your car affects the distance needed to stop it. The stopping distance is persistent by three factors: perception distance, reaction distance, and braking distance. Perception time is how long it endures to recognize a condition and comprehend that you require to stop.
To learn more about perception distance visit here:
https://brainly.com/question/13034462
#SPJ4
during the game, a player flies above a ring and drops a ball through from a height of 20 m. f the ball takes 7.0 seconds to fall, find the acceleration due to graviit
The acceleration due to gravity is 0.8 m/s^2.
What is an explain acceleration?Acceleration: the rate at which the speed and direction of a moving object vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.
What is the SI unit for acceleration?In physics, acceleration is the rate at which the velocity of an object changes in relation to time. According to Newton's Second Law, the sum of all forces acting on an item results in its acceleration. Meter per second squared (m s2) is the unit of acceleration used in the SI system.
The motion of an object in free fall is a uniformly accelerated motion,
[tex]s=ut+\frac{1}{2} gt^2[/tex]
s is the vertical displacement
u is the initial velocity
t is the time of flight
g is the acceleration of gravity
For the ball dropped,
s = 20 m
t = 7.0 s
u = 0
Now, substitute values,
[tex]20=0+\frac{1}{2} g(7.0)^2[/tex]
[tex]g=\frac{2*20}{7.0^2}[/tex]
[tex]g=0.8 m/s^2[/tex]
To know more about gravity visit:
https://brainly.com/question/13655167
#SPJ4
Does speed increase down a ramp?
The speed depends on the gravitational force acting on the object in the rolling motion of the object that is acting on it at a continuous moment rate. the speed increases at a constant rate.
Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.
Learn more about Rolling motion:
brainly.com/question/29568301
#SPJ4
What are the coefficients in the equation for the magnetic field component of the wave after the period increases by a factor of 2.70
The coefficient of magnetic field was found to be Bmax, k = 1.53x10¹¹, 1.14x10⁴,3.43x10¹² T,1/m,rad/s.
Define magnetic field ?Moving charges, wave action, and magnetic materials all experience the magnetic influence of a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetization is applied to it when it moves through a magnetic field. A permanent magnet's magnetic field draws on ferromagnetic materials like iron and repels or attracts other magnets. The three additional magnetic effects of diamagnetism, electromagnetism, and biomagnetism also cause tiny forces to be exerted on "nonmagnetic" materials by a nonuniform magnetic field, although these forces are frequently so minute , they can only be detected using laboratory apparatus. Electric currents used in electromagnets and time-varying electric fields produce magnetic fields that surround magnetized objects.
Magnetic field maximum = 1.531011,
The wave number is 1.14104.
In teslas, the angular frequency is 3.431012 T.
meters-1 in reverse,
rad/s = radians per second
To learn more about Magnetic field follow the given link: brainly.com/question/25801845
#SPJ4
If you cool down a container of gas, there will be _______ collisions with the side of the container, resulting in ______ pressure.
A container of gas might lose pressure by cooling down because there are fewer collisions with the container's side.
What transpires when a container of gas is cooled?When the gas in the supplied sealed jar is chilled, the molecules travel more slowly. This occurs because when the temperature drops, gaseous particles get closer to one another (on cooling). Upon cooling, there are also fewer accidents.
How does a gas's compression affect the frequency of collisions inside a container?The container's capacity has shrunk, which reduces the distance the gas molecules must travel before colliding. As a result, there will be more collisions per second, increasing the pressure.
To know more about collisions visit:
brainly.com/question/4322828
#SPJ4
How far did Makalah push the 500 Newton car if she did 800 Joules of work?
Answer:
300 i belive
Explanation:
Suppose a 51-N sled is resting on packed snow. The coefficient of kinetic friction is 0.13. If a person weighing 680 N sits on the sled, what force is needed to pull the sled across the snow at constant speed
95 N much force is needed to pull the sledge at a constant speed.
Explain force.A force in physics is an effect that has the power to alter what an object moves. Every object with mass might travel faster or at a different rate as a result of a force. A push or a pull made natural sense when describing force. Since forces are vector quantities, they own both size and direction.
The sled is being subjected to the following horizontal forces:
F = applied force.
Fr = friction force.
And the following vertical forces:
N = normal force.
W =combined weight of the person and the sled
The second law of Newton states:
F = m * a
where the object's mass is "m" and its acceleration is "a"
So, in the horizontal direction:
F - Fr = m *a
Determining the force, F, required to keep the sled moving at a constant pace (acceleration = 0). Then,
F - Fr = 0
F = Fr
The applied force must have a magnitude equal to or greater than the friction force.
The friction force is calculated as follows:
Fr = μ · N
Where μ is coefficient and N represent the normal force, respectively.
Let's use Newton's second law with in vertical direction to determine the normal force:
F = N - W
= m · a
Keep in mind that the sledge is not accelerated vertically so that a = 0:
N - W = 0
N = W
The mass is the total of a weight of a person plus the mass of the sled, and the force is equivalent to the weight:
W = 51 N + 680 N = 731 N
Then:
N = 731 N
Fr = 0.13 · 731 N
Fr = N
Then
F = 95.03 N
As a result, 95 N of force is necessary to pull a sled at a steady pace.
To learn more about force from the given link:
https://brainly.com/question/14308662
#SPJ4
distinguish between Mass and weight
Answer:
One is heavier and one is lighter.
The amplitude of pulse A is 20cm and that of pulse B is 10 Cm what is the maximum of the resultant pulse
Answer:
The maximum amplitude of the resultant pulse would be 30 cm.
Explanation:
The maximum amplitude of the resultant pulse would be 30 cm.
The maximum amplitude of the resultant pulse would be the sum of the amplitudes of pulse A and pulse B, which is
20 cm + 10 cm = 30 cm.
This is because the maximum amplitude of the resultant pulse would occur when the two pulses are in phase, meaning they are both at their highest point at the same time.
When the two pulses are out of phase, their amplitudes will cancel each other out to some degree, resulting in a lower overall amplitude.
To learn more about Pulse:-
https://brainly.com/question/27205915?referrer=searchResults
https://brainly.com/question/16001036?referrer=searchResults
If the amplitude of pulse A is 20cm and that of pulse B is 10 cm, the maximum of the resultant pulse is 30 cm.
What is amplitude?
A sound wave's amplitude measures the height of the wave. When a sound is made, the maximum displacement of the medium's vibrating particles from their mean position determines the amplitude of the sound wave. It is the separation between the wave's crest or trough and its mean location.
The phenomenon of constructive interference occurs when two waves superimpose on each other in the same phase, with the resultant wave's amplitude being equal to the sum of the separate waves' amplitudes and producing the maximum amount of light.
The amplitude of pulse A is 20cm.
The amplitude of pulse B is 10cm.
Hence, the maximum of the resultant pulse is = (20 cm + 10 cm) = 30 cm.
Learn more about amplitude here:
https://brainly.com/question/8662436
#SPJ2
Some liquid is poured into a burrete so that it reads 14cm³.50 drops were run each of volume 0.1cm³ .
What is the volume of the fifty drops
Given :
Liquid is poured into a burrete so that it reads 14cm³.
50 drops were run each of volume 0.1cm³ .
To Find :
The volume of liquid in burrete after 50 drops.
Solution :
Volume of each drop, v = 0.1 cm³.
Initial volume in burrete, V = 14 cm³.
Now, volume left after droping 50 drops are :
[tex]L = V - 50v\\\\L = 14 - 50\times 0.1 \ cm^3 \\\\L = 9 \ cm^3[/tex]
Therefore, the volume left in burrete is 9 cm³ .
how to calculate the mass of a body whose weight is 200 N
Answer:
20.4081633 kilograms.
Explanation:
To find an object's mass using its weight, the formula is Mass equals Weight divided by the Acceleration of Gravity (M = W ÷ G). Convert the weight measured in pounds to the equivalent in Newtons.
Divide the weight in Newtons by the acceleration of gravity to determine the mass of an object measured in Kilograms. On Earth, gravity accelerates at 9.8 meters per second squared (9.8 m/s2). For example, to determine the mass of an object weighing 667 Newtons, calculate as follows:
200 Newtons ÷ 9.8 m/s2 = 20.4081633 kilograms.
Consider you are X units in distance from a light source. You receive Y unit of light per unit time. You have to be _____ X units in distance from the light source in order to receive 4Y unit of light per unit time.
when it takes 4x units of distance from the light for you to receive 4Y units of light in a given amount of time.
What is a distance?Distance is a measurement of the separation between two things or locations, either quantitatively or qualitatively. A physical distance or perhaps an estimate relying on other physics- or usage-related characteristics can both be referred to as distance. The phrase is also employed metaphorically to denote a measurement of the degree of distance between two common pieces since spatial intelligence is a rich source of implicatures in human understanding. The majority of these concepts of distance, both literal and figurative, are codified using the idea of a metric space.
To learn more about distance follow the given link: brainly.com/question/12356021
#SPJ4
Two arrows are fired simultaneously with the same speed of 30.0 m/s. Each arrow has a mass of 0.100 kg. One is fired due east and the other due south. What is the magnitude of the total momentum of this two-arrow system
The magnitude of the total momentum of the two-arrow system can be calculated by adding the magnitudes of the individual momenta of each arrow is 4.242.
Calculation=
total momentum = sqrt ( m1u1^2 + m2 u2 ^2)
m1 u2 = 30 * 0.1 = 3
total momentum = sqrt ( 9 + 9 ) = 3 sqrt (2) = 4.242
What is the projectile's acceleration at the pinnacle of its trajectory?As a result, from the moment the projectile is hurled, through its greatest point, and until it touches the earth, its acceleration is 9.81 meters per second per second, or equal to the acceleration caused by gravity.
to know more about magnitude here:
brainly.com/question/14154454
#SPJ4
how much time would it take for an object to fall 4.7 meters
Answer:
t = 0.97 s
Explanation:
Given that,
height, h = 4.7 m
We need to find the time taken by the object to fall 4.7 m.
Let it is t. Using second equation of kinematics to solve it such that,
[tex]h=ut+\dfrac{1}{2}gt^2[/tex]
u is initial velocity, u = 0
So,
[tex]h=\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{2h}{g}}\\\\t=\sqrt{\dfrac{2\times 4.7}{9.8}}\\\\t=0.97\ s[/tex]
So, the required time is equal to 0.97 seconds.
The time it would take the object is 0.98 secs
From the question,
We are to determine how much time it would take for an object to fall 4.7 meters. That is, the time it would take the object to fall from a height 4.7 meters.
From one of the equations of motions for free falling object.
[tex]h = ut + \frac{1}{2} gt^{2}[/tex]
Where h is the height
u is the initial velocity
t is the time
and g is the acceleration due to gravity (Take g = 9.8 m/s²)
Since, the object is dropped from rest, the initial velocity, u, is 0 m/s
From the given information,
h = 4.7 m
Putting the parameters into the equation, we get
[tex]4.7 = 0(t) +\frac{1}{2} (9.8)t^{2}[/tex]
[tex]4.7 = 0 + 4.9t^{2}[/tex]
[tex]4.7 = 4.9t^{2}[/tex]
∴ [tex]t^{2} = \frac{4.7}{4.9}[/tex]
[tex]t^{2}= 0.9592[/tex]
[tex]t = \sqrt{0.9592}[/tex]
t = 0.98 secs
Hence, the time it would take the object is 0.98 secs
Learn more here: https://brainly.com/question/18915944
which of the following causes low lung compliance as a result of last of electrical lung tissue destruction
Interstitial lung disease is low lung compliance as a result, last of electrical lung tissue destruction.
Interstitial lung disorders brought on by breathing in particles like silicon and asbestos (asbestosis) can cause low lung compliance (silicosis).
Lungs and the pleural cavity have the capacity to expand and contract in response to variations in pressure. Lung compliance, which is a key determinant of lung health and function, is defined as the volume change per unit of pressure change across the lung. Lung compliance varies between inhalation and expiration because measurements of lung volumes vary between the two at the same pressure. Depending on whether only volume and pressure are measured (static) or whether their variations over time are also recorded, lung compliance can be classified as either static or dynamic.
know more about lungs here
https://brainly.com/question/13210870#
#SPJ4
A twig floating in a small pond is initially at rest. On the twig is a snail, which begins moving along the length of the twig with a speed of 1.2 cm/s. The twig moves in the opposite direction with a speed of
0.40 cm/s. If the snail's mass is 2.5 g, what is the mass of twig?
The mass of the twig can be calculated using the law of conservation of momentum.
What is law of conservation?The Law of Conservation states that matter and energy cannot be created or destroyed, only changed from one form to another. This law is one of the most fundamental laws of physics, and it applies to all forms of energy, including heat, light, and electrical energy. This law helps explain why energy is always conserved, meaning that it can never be lost, only transferred or converted into another form. This law is also important in understanding the behavior of matter, as it explains why matter can never be completely destroyed, only rearranged or changed in form.
Momentum is equal to the mass times the velocity, so the total momentum of the twig and the snail before the snail starts moving is zero. After the snail starts moving, the momentum of the twig and the snail is equal to the snail's momentum, which is equal to 2.5 g x 1.2 cm/s = 3.0 g cm/s. Since the velocity of the twig is 0.4 cm/s, the mass of the twig must be equal to 3.0 g cm/s / 0.4 cm/s = 7.5 g.
To learn more about law of conservation
https://brainly.com/question/1113396
#SPJ1
You can just say if its A B C or D.
Thank you!
an astronomer observes a magnitude 18 star, but needs 10 times as many. what's the faintest star he can see and still get enough photons.
As according Scientific American, even one photon can result in a visible burst of light.
How so many photons are necessary for you to see a star?The human eye can see about 10 photons.To an eye accustomed to the dark, the weak light may appear to be flashing, yet each twinkling just represents a few photons.When shooting images of the cosmos from orbit with very sensitive equipment at very low temperatures, a photon stream would be sufficient.
Can you see a single photon?The answer is yes because the receptors in the retina can respond to a single photon.However, brain filters only allow a signal to pass through and activate the brain when five to nine additional signals do the same in less than a hundred milliseconds.
To know more about magnitude visit:
https://brainly.com/question/14452091
#SPJ4
Give 3 real life examples of some other examples that you have seen of people displaying data. List the name of the data being displayed.
I NEED THIS ASAP
3 real life examples of people displaying data are, analyzing train schedule, tracking, favorite player stats, analyzing data of workout machines.
Analyzing different types of data is included in our daily life routine. We can understand it by the following examples:
First is analyzing the train schedule to find out which train is going to our destination, and how much time it will take to reach there, etc. Second one is analyzing the player stats to look how amazing the records have been of your favorite player in last 5 years, against a particular team, etc. Third one is analyzing the data of workout machines, like, how much weight you gained/loose, how much weight you are lifting in the gym, etc.
To know more about schedule, here
https://brainly.com/question/9917659
#SPJ4
What cells are missing in SCID?
The term "combined immunodeficiency" refers to a genetic abnormality that affects T cells as well as at least one other kind of immune cell in SCID patients.
According to which immune cells—T, B, and/or NK cells—are damaged, different types of SCID are categorized. The deadly illness known as severe combined immunodeficiency (SCID) is caused by a variety of hereditary factors and is defined by severe impairments in T and B cell activity as well as, in some kinds, NK cell function.
X-SCID B cells typically have normal numbers, but they perform abnormally because IL-21 signaling, which is vital for the B-cell lineage's maturation, differentiation, and activation, is compromised (4, 5). Patients with SCID who receive HLA-identical transplants have a survival rate of about 90%. (3, 6).
To learn more about SCID from given link
https://brainly.com/question/15526421
#SPJ4
If 80 watts of power is produced in 40 seconds, how much work can we do?
Answer:
Hello There!!
Explanation:
Use the equation:Work done = Force x Distance.
Work done=80W×40s
Work done=3200J
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
Work done = Force × distance.
Work done = 80W × 40s
work done = 3200J
ThanksHope it helps.What does the second law of thermodynamics tell us about?
Explanation:
The Second Law of Thermodynamics states that the state of entropy of the entire universe, as an isolated system, will always increase over time. The second law also states that the changes in the entropy in the universe can never be negative.
Copper (Cu) reacts with phosphorus (P) to produce copper (II) phosphide.
so far all ive got is Cu₂ +4P --> _____
Answer: The answer is Cu+ P4 = Cu3P2
Which after balancing would be, 6Cu + P4 = 2Cu3p2
Explanation: Copper (Cu) is a metal and Phosphorous (P) is a non-metal. Metals and Non-metals combine to form ionic compounds where there is a transfer of ions from metal to non-metal.
Phosphorous has 5 valence electrons in its outer shell and Copper has 2 valence electrons. Following the octet rule, which means that the outer shell should have 8 electrons to be complete we see that combining these two metals on combining have electrons insufficient so we combine till we reach the octet structure. In this case, it happens when there are three copper and two phosphorous. We see that there are no more valence electrons. So it forms Copper II Phosphide, where the two indicates the charge of Copper.
Then we move on to balance both the sides of the equation, upon placing one number after the other to make the numerical value of elements equivalent to the other. Which gives us the answer.
What is the density of a sample if its mass is 44.2g and its volume is 22.1cm3?
Taking into account the definition of density, the density of a sample if its mass is 44.2 g and its volume is 22.1cm³ is 2 g/cm³.
Definition of densityDensity is the ratio of mass to volume of a substance. In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance.
The expression for the calculation of density is:
density= mass÷ volume
This means that density (ρ) is equal to mass (m) divided by volume (v) and it is possible to deduce that density is inversely proportional to volume: the smaller the volume occupied by a certain mass, the greater the density.
Density is one of the physical properties of matter that can be observed in its different states: solid, liquid, and gas.
Density of the sampleIn this case, you know that:
Mass= 44.2 gVolume= 22.1 cm³Replacing in the definition of density:
density= 44.2 g÷ 22.1 cm³
Solving:
density= 2 g/cm³
In summary, the density is 2 g/cm³.
Learn more about density:
brainly.com/question/952755
brainly.com/question/1462554
#SPJ1