Your worksheet appears with a reduced view of each page and blue dividers where new pages begin. What view are you in
Your worksheet displays a condensed version of each page and blue dividers to indicate where new pages start (page break preview).
What does the response on the worksheet mean?
In an Excel document, a worksheet is a collection of cells organised in rows and columns. It is the location where data entering happens. With select the optimal rows and corresponding to the different columns, each worksheet serves as a huge table for organizing data.
What does a worksheet in the classroom mean?
Worksheets are often loose sheets of paper with exercises or questions on them for students to complete and record their responses. They are utilized in most courses to some extent, and there are two main varieties in the math curriculum where they are often used.
To know more about worksheet visit:
https://brainly.com/question/13129393
#SPJ4
There are critical times when memory problems often manifest themselves. Match each critical time on the left with the corresponding cause of the memory problems on the right.
This event can require more memory and can cause problems if there is not enough memory when it occurs.
- Software installation
Memory is not properly seated or missing/the motherboard is defective.
- First boot of a new computer
Incompletely or improperly doing this can cause errors that appear to be memory-related.
- Hardware installation or removal
The memory is not compatible and was not installed and configured properly.
- Memory upgrade
At these critical times, memory problems can manifest themselves as follows:
First boot of a new computer - memory is not properly seated, missing, or the motherboard is defective.
After a memory upgrade - ensure that the memory is compatible and was installed and configured properly.
After software installation - new software can require more memory and can cause problems if there is not enough memory for the software.
After hardware installation or removal - incompletely or improperly installed hardware can cause errors that appear to be memory-related.
Software installation, First boot of a new computer, Hardware installation or removal, Memory upgrade is the correct match.
How do I upgrade my memory?A RAM or system memory increase may be suggested to enhance a computer's performance. An upgrade entails either replacing the outdated memory modules with a set of new, greater capacity modules or adding additional memory modules to the existing ones.
Is memory expansion worthwhile?Your PC's performance will significantly improve whether you choose to boost your memory or storage. Your slow computer will function more quickly when you add extra RAM since it will be able to handle more tasks concurrently.
To know more about Memory upgrade visit
brainly.com/question/21106765
#SPJ4
A dial-up access network typically has high ___________ delays compared to most other access networks. Pick the best answer
With a dial-up connection, you can access the Internet at data transfer rates (DTR) of up to 56 Kbps using a regular phone line and an analog modem.
Dial-up access is it?refers to using a modem and the public telephone network to connect a device to a network. Dial-up access is essentially identical to a phone connection, with the exception that computer devices rather than people are the participants at both ends.
Dial networking: What is it?Dial-up networking is the collection of protocols and software used to link a computer to an online service, a distant computer, or an Internet service provider using an analog modem and POTS (plain old telephone system). The most popular kind of computer connection to the Internet is dial-up networking.
To know more about DTR visit:-
https://brainly.com/question/12914105
#SPJ4
Compare the printout on the SDV screen (Brain) with the list you created and coded. Why didn’t the Brain have 1s and 0s on it? Can you identify how the code creates what you saw on the Brain?
The printout on the SDV screen (Brain) and the list I created and coded, are different because the code creates a representation of the data on the Brain, rather than displaying the data itself in the form of 1s and 0s.
The code is used to create the visualization on the Brain by interpreting the data and displaying it in a way that is understandable for humans. This visualization can include various elements such as text, images, and graphics. The code is responsible for creating the layout, design, and functionality of the visualization, as well as for processing and displaying the data.What is the code about?It is likely that the code uses various programming libraries and frameworks to create the visualization on the Brain, and these libraries and frameworks have their own methods for handling and displaying data.
The code may also use algorithms and data structures to process and organize the data before it is displayed on the Brain.
In all, the printout on the SDV screen (Brain) and the list I created and coded are different because the code creates a representation of the data on the Brain rather than displaying the data itself in the form of 1s and 0s. The code uses various programming libraries, frameworks, algorithms and data structures to process and display the data in a way that is understandable for humans.
Learn more about coding from
https://brainly.com/question/27639923
#SPJ1
g Shift registers and counters use hardware _____________________ for their internal data storage.
A series of core registers coupled together to generate a clock-driven data shift is known as shift register counters. Johnson counters and ring counters are two of the most popular types of these.
What is the purpose of a shift register?Shift registers are widely used in converters that convert parallel data to serial data or vice versa. Shift registers can also be employed as delay circuits and digital pulse extenders.
Can data be stored in a shift register?A shift register is represented by a pair of terminals that are placed next to one another, vertically on either side of the loop boundary. When an iteration is finished, data is stored in the terminal on the right side of the loop, which has an up arrow.
To know more about shift register here:-
brainly.com/question/14096550
#SPJ4
The Query Editor of the Management Studio lets you enter and execute all types of
A) SELECT statements
B) DDL statements
C) DML statements
D) SQL statements
All DDL statements are inputtable and executable in the Management Studio's Query Editor.
What key is needed to run a query in the query Editor?Pressing CTRL+L when creating a query will execute the selected text or all of the statements in the Query Editor window, displaying the execution plan.
In Microsoft SQL Server Management Studio, how do you open the query editor?Select New Query from the context menu by selecting the server node that is currently associated with a Database Engine instance. In addition to connecting to the same instance of the Database Engine, this will open a Database Engine Query Editor window and set the window's database context to the login's default database.
To know more about DDL statements visit :-
https://brainly.com/question/29834976
#SPJ4
Which of these is an example of the integrity principle that can ensure your data is accurate and untampered with :
Options of the questions are Given Below.
A: Using Encapsulating Security Payload
B: Using MACs (Message Authentication Codes)
C: Keeping a symmetric key secret
D: Implementing flood guards
(A). Using Encapsulating Security Payload
(B). Using MACs (Message Authentication Codes)
What kind of situation poses a threat to integrity?A person using unauthorized access to a system to modify data in a file is an illustration of an integrity attack. Furthermore, the execution of unauthorized commands on a system could jeopardize the security of the entire system.
Which of these is a good illustration of how the confidentiality principle may protect your data?Data is rendered illegible by encryption to all but those with the necessary password or key. You can guard sensitive files from being read or used by anyone who are not authorized to do so by encrypting them (for instance, using file passwords).
Which of the following can compromise the accuracy of information and data?Human error, whether purposeful or inadvertent, can affect data integrity. Transfer mistakes, such as unwanted changes or data compromise, can happen when data is transferred from one device to another. bugs, malware/viruses, hacking, and other online dangers.
To know more about integrity visit:
https://brainly.com/question/14710912
#SPJ4
an e-mail virus involves sending an e-mail message with a modified field. true or false
False. Sending an email message with a changed field is how an email virus works.
What does computer email mean?A desktop tool called e-mail enables users to exchange messages each other in order to communicate. Email, the equivalent of a letter in electronic form, has advantages over letters in regards to flexibility and speed. Email has several uses, one of which is automated voice respond. auto-forwarding and rerouting of messages
Why do people use email?Email is used for numerous reasons, including communicating with friends, communicating with professors and superiors, gathering information, and sending applications for jobs, fellowships, and grants. Guess it depends on your objectives, the formality of your communications, the target market, and the desired outcomes will alter.
To know more about email visit:
https://brainly.com/question/15710969
#SPJ4
Summarize the changes that you would need to make to your parking lot program if the lot grew to an arbitrarily large size.
- What is the function of these 3 types of application software
Word Processing
Spreadsheet
Database
A word processor is a computer application used to write and edit documents, arrange the text's layout, and preview the printed version on a computer screen.
What purpose does spreadsheet software serve?A spreadsheet is a piece of software that you can use to quickly execute mathematical operations on statistical data, add up many columns of numbers, or calculate averages and percentages.
What use does database software serve?Users of database software can centrally manage, store, access, and save data. Additionally, it makes it simple for users to control who has access to the database and what permissions they have, protecting the data.
To learn more about software visit:
brainly.com/question/985406
#SPJ1
*** JAVA ***
Retype and correct the code provided to combine two strings separated by a space.
secretID.concat(spaceChar);
secretID.concat(lastName);
import java.util.Scanner;
public class CombiningStrings {
public static void main (String [] args) {
String secretID = "Barry";
String lastName = "Allen";
char spaceChar = ' ';
/* Your solution goes here */
System.out.println(secretID);
return;
}
}
* This program is used to Concatenate the strings *
// import statement
import java.lang.*;
// Create a class CombiningStrings
public class CombiningStrings
{
// Create a main method
public static void main(String[] args)
{
String secretID = "Barry";
String lastName = "Allen";
char spaceChar = ' ';
/* Your solution goes here */
// Convert character data type to string data type
// The concatenation operation occurs with two string data
//types
String strSpaceChar = Character.toString(spaceChar);
// Concatenate two strings secretID and strSpaceChar
secretID = secretID.concat(strSpaceChar);
// Concatenate two strings secretID and lastName
secretID = secretID.concat(lastName);
// Display secretID
System.out.println(secretID);
return;
}
}
To know more about JAVA visit:
https://brainly.com/question/29897053
#SPJ4
Which of the following statements is true of geographic top-level domains (TLDs)?
Select one:
a. They are used by the organizations that provide information services.
b. They are used to promote business and tourism.
c. They are limited to members of a defined community.
d. They are owned by corporations to control use of their brands.
They are employed in the marketing of commerce and travel. Whichever of the following is accurate about geographic top-level domains (TLDs).
Do top-level domains include TLD?After the root domain in the Internet's hierarchical Domain Name System, a top-level domain (TLD) is one of the domains at the highest level. In the name space's root zone, top-level domain names are deployed.
What do TLD names for top-level domains mean?A top-level domain (TLD) sits after the root zone in the DNS hierarchy as the first stop. A TLD, or top-level domain, is the part of a domain name that comes after the last dot. The TLD for "gobgle.com," for instance, is ".com." ' and are a few additional well-known TLDs.
To know more about top-level domains visit :-
https://brainly.com/question/28041008
#SPJ4
Which of the following describes an engine where the pistons move horizontally rather than vertically or diagonally
A "boxer" engine is one in which the pistons move in opposition to one another and the cylinders are arranged horizontally rather than vertically, as in inline and V-type engines.
Exactly what Engines are devices that transform energy from a variety of sources into mechanical force and motion:
additionally: a device or item that acts as an energy source. Quasars' engines might be black holes, like a locomotive.
How come it's called an engine?
The word "engine" derives from the Latin ingenium, which also refers to mental aptitude or cunning. The term acquired the meanings of inventiveness, contrivance, deception, and malice throughout its transition from French to English.
To know more about engine visit:
https://brainly.com/question/1232655
#SPJ4
Above all else, what must be protected to maintain the security and benefit of an asymmetric cryptographic solution, especially if it is widely used for digital certificates
To retain the security and benefit of an asymmetric cryptographic solution, especially if it is widely applied to digital certificates, the private key must be maintained.
Which of the subsequent algorithms is used for asymmetric encryption?Modern computers encrypt and decrypt messages using the RSA method. An asymmetric cryptography algorithm is used.
Asymmetric public key cryptography employs a total of one, two, three, or four keys?Asymmetric cryptography, sometimes called public-key cryptography, is a method for encrypting and decrypting messages and safeguarding them from unwanted access or use. It uses a pair of linked keys, a public key and a private key.
To know more about cryptographic visit :-
https://brainly.com/question/3026658
#SPJ4
the ____ function is used to interchange the contents of two string variables.
a. iterator
b. swap
c. change
d. traverse
Answer:
b. swap
Explanation:
A computer user has provided input, and the computer system has completed its processing functions, but the user does not have an immediate use for the information that resulted from the processing. What type of peripheral device might then be used for the next step of the process?
The following stage of the process might then make use of a peripheral device of the hard disk variety.
What should you do if a computer headset that is connected in isn't functioning properly?What should you do if a computer headset that is connected in isn't functioning properly? Remove the headset's plug. -Refresh the device driver. - Change the computer's power cable.
Detailed instructions that explain to the computer how to transform data into information?The software, or the carefully thought out, sequential instructions needed to transform data into information, is what actually makes computers useful. Software categories. In general, software can be divided into system software and applications software.
To know more about peripheral device visit :-
https://brainly.com/question/4297339
#SPJ4
To represent relationships, ________ are added to tables.
A. locking keys
B. value keys
C. entity keys
D. normalized keys
E. foreign keys
foreign keys, Tables are enhanced with foreign keys to represent relationships.
What does "foreign key" mean?A row or columns of information in one table that relate to the distinct data values, frequently the primary key data, in another table are said to be "foreign keys." In a relational database, foreign keys link between two or more tables.
How do primary keys and foreign keys differ?A main key typically emphasizes the table's uniqueness. It guarantees that the value in that particular column is distinct. Typically, a foreign key is utilized to establish a connection among the two tables.
To know more about foreign key visit :
https://brainly.com/question/15177769
SPJ4
Medicaid is known as the __________, since it is always billed after another plan has been billed, if other coverage exists.
Since Medicaid is always billed after another plan, if another kind of coverage is available, it is known as the dual-eligible Medi Medi beneficiaries.
What alternative names exist for Medicaid?They could go by other names, such as "Medical Assistance" or "Medi-Cal." Millions of Americans, including some low-income individuals, families with children, pregnant women, the elderly, and people with disabilities, have access to Medicaid, a joint federal and state program, which offers free or inexpensive health coverage.
In the past, what was a Medicaid?Medicare and Medicaid were both enacted into law in 1965 under the authority of Title XIX of the Social Security Act. Medicaid programs are set up to offer low-income people health insurance in every state, the District of Columbia, and the US territories.
To know more about Medicaid visit :-
https://brainly.com/question/17880152
#SPJ4
give 4 example for echinodermis cnidarians poriferas platyhilminthes nematodes and annerids
Answer:
Among the largest and most important invertebrate phyla are Porifera (sponges), Cnidaria (jellyfish, corals, and sea anemones), Platyhelminthes (flatworms), Nematoda (roundworms), Mollusca (snails, bivalves, squids, and octopuses), Annelida (segmented worms), Arthropoda (horseshoe crabs, spiders, crabs, centipedes, ..
The process of sending print jobs from the print queue to the printer is called? a. spooling b. queuing c. redirecting d. printing.
Printing is the action of sending print jobs from the print queue to the printer.
Which of the following describes a print server's role?By establishing a network connection with the server, computers may interact with nearby printers. The print server guards printers from overloads. It manages the allocation of ’s due to devices and queues them in order to maintain orderly operation and avoid overloading printer hardware.
The message is produced using the print() method to a standard output device, such the screen. The message can be a phrase or any other object, and the object will be converted to a string before it is presented on the screen.
To know more about Print server's, refer:
brainly.com/question/29738751
#SPJ4
a(n) ______ machine enables you to install a second operating system on a computer.
A virtual machine (VM) is a type of compute resource that uses software rather than a real computer to run applications and run programs. A physical "host" machine hosts one or more virtual "guest" machines.
What advantages do virtual machines have?A firm can save time, money on management, and physical space by running numerous OS instances on a single piece of hardware because the software is distinct from the actual host computer.
What VM software is the most widely used?The top four virtualization-friendly programs are VMware Fusion, Parallels Desktop, Oracle VM Virtual Box, and VMware Workstation. Really great features are provided for free by Oracle VM Virtual Box. It is also compatible with Mac, Windows, and Linux.
To know more about virtual machine visit :-
https://brainly.com/question/30044516
#SPJ4
Define the term Project brief? why is it important to do planning?Atleast 2 paragraph.
A project brief is a concise explanation of the important components of your project. Consider it a high-level overview for project stakeholders and cross-functional collaborators.
What is a project brief?Your project brief should explain your project requirements without overwhelming your stakeholders with specifics. The project brief is a document that summarizes the project.
The paper highlights all of the project's significant and necessary components. This comprises the project scope, project objectives, and the ambitions or goals that the project seeks to attain.
Therefore, A project brief is a concise overview of your project's key components. Consider it an executive summary for project stakeholders and cross-functional collaborators.
To learn more about the project brief, refer to the link:
https://brainly.com/question/25009327
#SPJ1
LANs, WANs, and MANs all provide users with an accessible and reliable network infrastructure. Which of the below are the most important network differentiating dimensions? Reliability and timing Confidentiality and performance Security and cost Cost and performance
Performance and price what features distinguish networks the most? Timing and dependability Performance and confidentiality Cost and safety Performance and price.
LAN MAN WAN: What is it?An office building, a school, or a home may have a local area network (LAN) that links a number of nearby computers. A state, province, or country, for example, can be covered by a wide area network (WAN).
Which four types of wireless communication networks are under the Metropolitan Area Network (MAN) umbrella?Performance and confidentiality Cost and safety Performance and price. There are four different types of wireless networks, each with a specific purpose: wireless local area networks, wireless metropolitan area networks, wireless personal area networks, and wireless wide area networks.
To know more about LANs visit :-
https://brainly.com/question/13247301
#SPJ4
Parker has an Android smartphone. Which type of processor is used in his mobile device?
a. x86
b. Intel Atom
c. ARM
d. None of these answers
Parker owns an Android phone. His mobile device has an ARM-type processor.
The definition of CPU clock rate?Every second, a large number of instructions (low-level computations like arithmetic) from various programs are processed by your CPU. The clock speed, expressed in GHz, reveals how many cycles your CPU performs per second (gigahertz).
How is RAM used?Random-access memory is referred to as RAM. Data is generally saved in your computer's RAM, or short-term memory, as the processor need it. Contrast this with long-term data stored on your hard disk, which is still accessible even after your computer has been switched off.
To know more about ARM visit :-
https://brainly.com/question/24117933
#SPJ1
When the positive integers with exactly three positive divisors are listed in ascending order, what is the fifth number listed
The first number will be an even square and the others wll be odd.
4 = 3 divisors; 9 = 3 divisors; 25 = 3 divisors; 49 = 3 divisors; 121 = 3 divisors.
How can I determine the amount of positive divisors?Exhaustive trial division is the simplest approach for calculating divisors. The set of positive divisors for an integer n is made up of those that divide evenly when we divide it by each of the integers 1, 2, 3,..., n. This is how we get the positive divisors for an integer n.
What is the quick method for calculating a number's divisors?The following formula can be used to determine how many powers of prime numbers n can have as its total divisors. When N=paqbrc. The total number of divisors is then equal to (a+1)(b+1)(c+1).
To know more about integers visit
brainly.com/question/15276410
#SPJ4
Short focal-length lenses have a narrow angle vantage point, which magnifies objects
and makes them look bigger and closer.
True or false
Small aperture optics get a narrow angle of view, which enlarges and makes objects appear closer and larger. This claim is untrue.
What is the magnify word's root?Magn is a Latin word with the meaning "great." Numerous English vocabulary words, notably magnificent, magnitude, and magnanimous, are derived from this root word. Magnifying glasses are a simple way to recall that magn meaning "great," since they amplify small objects to great proportions.
What would it mean when something is magnified?When someone exaggerates a situation, they view it as much more serious than it actually is, which leads them to respond to it or the relevant personnel in ways that lead to further issues.
To know more about Magnify visit :
https://brainly.com/question/28417569
#SPJ4
Which of the following is one of the primary advantages to using Active Directory to store DNS information
The primary advantages to using Active Directory to store DNS information is fault tolerance
Making it possible for domain client computers to locate a domain controller AND for domain controllers to locate one another in order to replicate changes to the Active Directory database is the major goal of DNS for Active Directory (AD).
Some recommendations to keep in mind when designing fault-tolerant systems for the canning department include:
1) To examine the software's dependability
2) To examine the system's redundancy structure for fault tolerance
3) To assess the use of reliability-oriented designs, programming approaches, and methods.
Four) Creating diverse
5) Resources and methods to be applied
6) The dependability of the software and hardware
Your question is incomplete ut most probably your full question was
Which of the following is one of the primary advantages to using Active Directory to store DNS information
a. fault tolerance b. zero configuration c. low maintenanced.
Learn more about dns at https://brainly.com/question/17163861
#SPJ4
the unit implemented a quality improvement program to address cleint pain relife. which set of criteria is the best determinant that the goal has been met. quislet
An organization's healthcare results can be improved by implementing a QI program, which is a collection of targeted tasks intended to track, evaluate, and enhance the quality of processes.
What does a QIP mean for healthcare?Each and every Medicare Advantage Organization (MAO) is required to implement a Quality Improvement Project (QIP) and a Chronic Care Improvement Program (CCIP) as part of their mandatory Quality Improvement (QI) Program as outlined in 42 CFR 422.152. For every contract, MAOs are required to carry out a CCIP and QIP.
What are the six areas where quality may be improved?Safety, effectiveness, patient-centeredness, timeliness, efficiency, and equity are the six characteristics of quality in healthcare that Don Berwick identifies.
To know more about QI program visit :-
https://brainly.com/question/29555477
#SPJ4
In an earlier assignment you modeled an inheritance hierarchy for dog and cat pets. You can reuse the code for that hierarchy in this assignment. Write a program that prompts the user to enter data (name, weight, age) for several Dog and Cat objects and stores the objects in an array list. The program should display the attributes for each object in the list, and then calculate and display the average age of all pets in the list using a method as indicated below:
public static double calculateAverage( ArrayList list )
{
... provide missing code ...
}
previous code
chihuahua
public class Chihuahua extends Dog
{
public void bark()
{
System.out.println("Bow wow");
}
}
dog
public class Dog
{
private String name;
private double weight;
private int age;
public String getname(String n)
{
name = n;
return n;
}
public double getweight(double w)
{
weight = w;
return w;
}
public int getage(int a)
{
age = a;
return a;
}
public void bark()
{
}
}
import java.util.Scanner;
public class DogCatTest
{
public static void main( String [] args)
{
Scanner scan = new Scanner(System.in);
System.out.println("Enter name");
String name = scan.nextLine();
System.out.println("Enter weight");
double weight = scan.nextDouble();
System.out.println("Enter age");
int age = scan.nextInt();
Dog [] dogCollection = { new Chihuahua(), new GoldenRetriever()};
for( int i = 0; i < dogCollection.length; i++ )
dogCollection[ i ].getname(name);
System.out.println(name);
for( int i = 0; i < dogCollection.length; i++ )
dogCollection[ i ].getweight(weight);
System.out.println(weight);
for( int i = 0; i < dogCollection.length; i++ )
dogCollection[ i ].getage(age);
System.out.println(age);
for( int i = 0; i < dogCollection.length; i++ )
dogCollection[ i ].bark();
System.out.println("Enter name");
String cname = scan.nextLine();
System.out.println("Enter weight");
double cweight = scan.nextDouble();
System.out.println("Enter age");
int cage = scan.nextInt();
Cat1 [] catCollection = { new SiameseCat(), new SiberianCat() };
for( int i = 0; i < catCollection.length; i++ )
catCollection[ i ].getname(cname);
System.out.println(cname);
for( int i = 0; i < catCollection.length; i++ )
catCollection[ i ].getweight(cweight);
System.out.println(cweight);
for( int i = 0; i < catCollection.length; i++ )
catCollection[ i ].getage(cage);
System.out.println(cage);
for( int i = 0; i < catCollection.length; i++ )
catCollection[ i ].meow();
}
}
public class GoldenRetriever extends Dog
{
public void bark()
{
System.out.println("Bow wow");
}
}
public class SiameseCat extends Cat1
{
public void meow()
{
System.out.println("Meow");
}
}
public class SiberianCat extends Cat1
{
public void meow()
{
System.out.println("Meow");
}
}
public class Cat1
{
private String name;
private double weight;
private int age;
public String getname(String n)
{
name = n;
return n;
}
public double getweight(double w)
{
weight = w;
return w;
}
public int getage(int a)
{
age = a;
return a;
}
public void meow()
{
}
}
Java program that shows the use of inheritance hierarchy, the code reuses the attributes of the class objects.
Importance of applying inheritance:In this case of pets (dogs and cats), applying inheritance allows a much shorter and more structured code. Also, reusable since we can add classes of other pets such as birds, rabbits, etc., all of them also belonging to the Pet superclass.
Reserved words in a java code that enforces inheritance:extendsprotectedSuperHere is an example:
Java codeimport java. io.*;
import java.util.ArrayList;
import java.io.BufferedReader;
public class Main
{
// ArrayList of Pet objetspublic static ArrayList < Pets > arraypets = new ArrayList < Pets > ();
public static void main (String args[]) throws IOException
{
BufferedReader data =
new BufferedReader (new InputStreamReader (System. in));
//Define variablesString aws;
String str;
double w;
String n;
int a;
double average;
do
{
//Data entry System.out.println ("Pet species? ");System.out.println ("(1) Cat ");
System.out.println ("(2) Dog ");
aws = data.readLine ();
System.out.print ("Enter name: ");
n = data.readLine ();
System.out.print ("Enter weight: ");
str = data.readLine ();
w = Double.valueOf (str);
System.out.print ("Enter age: ");
str = data.readLine ();
a = Integer.valueOf (str);
if (aws.equals ("1"))
{
Cat cat = new Cat (n, w, a);
arraypets.add (cat);
average = cat.averageAges (a);
}
else
{
Dog dog = new Dog (n, w, a);
arraypets.add (dog);
average = dog.averageAges (a);
}
System.out.print ("Enter more data? (y/n)");
aws = data.readLine ();
aws = aws.toLowerCase ();
}
while (!aws.equals ("n"));
//Calculate average of pets ageaverage = average / arraypets.size ();
average = Math.round (average * 100.0) / 100.0;
// OutputSystem.out.println ("Attributes for each object in the list: ");
for (Pets arraypet:arraypets)
{
System.out.println (arraypet);
}
System.out.println ("Number of pets: " + arraypets.size ());
System.out.println ("Average age of all pets in the list: " + average);
}
}
class Pets
{
protected String Name;
protected double Weight;
protected int Age;
public Pets ()
{
}
public Pets (String name, double weight, int age)
{
this.Name = name;
this.Weight = weight;
this.Age = age;
}
//Returning values formatted by tostring methodpublic String toString ()
{
return "Nombre: " + this.Name + ", Peso: " + this.Weight + ", Edad: " +
this.Age;
}
public void CalculateAverage ()
{
}
}
class Dog extends Pets
{
public Dog ()
{
super ();
}
public Dog (String name, double weight, int age)
{
super (name, weight, age);
}
//Adding the ages of the pets double averageAges (double a){
a += a;
return a;
}
}
class Cat extends Pets
{
public Cat ()
{
super ();
}
public Cat (String name, double weight, int age)
{
super (name, weight, age);
}
//Adding the ages of the petsdouble averageAges (double a)
{
a += a;
return a;
}
}
To learn more about inheritance hierarchy in java see: https://brainly.com/question/15700365
#SPJ4
running apps in which mode ensures that a poorly written app does not affect system stability?
Running apps in user mode makes guarantee that a bad app won't have an impact on system stability.
What do the terms OS kernel and user mode mean?The user mode and kernel mode of a CPU on a computer running Windows are two distinct operating systems. Depending on the type of code it is running, the processor alternates between the two modes. User mode is used for applications, and kernel mode is used for the essential parts of the operating system.
What are some user mode examples?A computer program is in user mode when it is executing. Word processing software, PowerPoint, viewing a PDF file, and internet browsing are a few examples. The computer is operating in user mode because they are application programs.
To learn more about user mode visit:
brainly.com/question/13383370
#SPJ1