Atoms of a substance gain kinetic energy, when thermal energy is applied to it. Therefore, option B is correct.
What happened to the kinetic energy of a molecule on applying thermal energy?When thermal energy is applied to a molecule, it increases the kinetic energy of the molecule. Thermal energy refers to the total energy associated with the random motion of particles within a substance.
The relationship between temperature and the average kinetic energy of a molecule is described by the kinetic theory of gases.
As thermal energy is added to a system, the average kinetic energy of the molecules increases. This happens because the energy is transferred to the molecules through collisions between them. Therefore, option B (atoms gain kinetic energy) is correct.
Learn more about thermal energy, here:
https://brainly.com/question/3022807
#SPJ6
what is the ph of an aqueous solution that is made by mixing 200 ml of 0.20m nah2po4 and 200 ml of 0.60m na2hpo4 at 25oc?
Answer: The pH of the solution is 9.22.
Explanation:
The given solution is a mixture of 200 mL of 0.20 M NaH2PO4 and 200 mL of 0.60 M Na2HPO4. NaH2PO4 is a weak acid and Na2HPO4 is a weak base. When they are mixed, they undergo a buffer solution.
The Henderson-Hasselbalch equation for a buffer is:
pH = pKa + log ([A-]/[HA])
Where,
pKa = -log Ka (dissociation constant of the acid)
[HA] = concentration of the acid (NaH2PO4)
[A-] = concentration of the conjugate base (HPO42-)
The pKa value for NaH2PO4 is 7.21 (at 25°C). The concentrations of the acid and the conjugate base can be calculated as follows:
For NaH2PO4:
moles of NaH2PO4 = 0.20 M x 0.2 L = 0.04 mol
concentration of NaH2PO4 = 0.04 mol / 0.4 L = 0.10 M
For Na2HPO4:
moles of Na2HPO4 = 0.60 M x 0.2 L = 0.12 mol
concentration of Na2HPO4 = 0.12 mol / 0.4 L = 0.30 M
Using the Henderson-Hasselbalch equation and substituting the values:
pH = 7.21 + log ([HPO42-]/[H2PO4-])
pH = 7.21 + log (0.30/0.10)
pH = 9.22
Therefore, the pH of the solution is 9.22.
which of the following is a type of physical weathering? group of answer choices thermal expansion dissolution oxidation hydration
Thermal expansion is a type of physical weathering, where rocks are broken down by changes in temperature.
Physical weathering is a type of weathering that involves the breakdown of rocks and other materials on the Earth's surface. Physical weathering occurs when rocks are broken down into smaller pieces through the action of physical processes. These processes can include the effects of temperature, pressure, and mechanical forces.
Thermal expansion is a process in which a material expands as it is heated. This process occurs because the molecules in the material begin to move more rapidly as they are heated, causing them to spread out and take up more space. This can cause the material to become distorted or deformed.
When this process occurs in rocks and other materials on the Earth's surface, it can cause them to crack and break apart, which is a form of physical weathering.
Dissolution is the process of breaking down a substance into smaller particles. This process is a form of chemical weathering, not physical weathering. Oxidation is also a form of chemical weathering, in which a substance reacts with oxygen to produce a new substance. Hydration is the process of adding water to a substance. This can cause the substance to expand or change in other ways, but it is not a form of physical weathering.
Therefore thermal expansion is a type of physical weathering, which involves the breakdown of rocks without any chemical changes.
To know more about thermal expansion click here:
https://brainly.com/question/30242448
#SPJ11
the ammonium ion has the formula nh4 . how many nonbonding electrons must be shown in the lewis structure of the ammonium ion?
Answer:
Explanation:
NH₄
N: 1 x 5 valence electrons = 5 valence electrons
H: 4 x 1 valence electrons = 4 valence electrons
Total valence electrons to account = 9
Subtract 1 electron from the total since NH₄⁺ has a plus one charge.
9 - 1 = 8 electrons
There are no nonbonding electrons in the structure.
H
|
H -- N -- H
|
H
what must be true of a spontaneous process? a) enthalpy must increase. b) there will be a flow of heat. c) entropy of the universe increases. d) entropy of the system increases. e) entropy of the surroundings increases.
The statement that must be true of a spontaneous process is C) entropy of the universe increases as heat is generated.
In thermodynamics, a spontaneous process is one that occurs on its own without any external intervention or help. The Second Law of Thermodynamics states that entropy, a measure of disorder and randomness, must increase for a spontaneous process to occur. This means that the entropy of the universe must increase, as entropy of the system and its surroundings could both increase, decrease, or stay the same.
In terms of enthalpy, which is the energy required to bring the system to its initial state, it could increase, decrease, or stay the same, depending on the process. The flow of heat is related to entropy, as a change in entropy is accompanied by a flow of heat. This means that in a spontaneous process, there must be a flow of heat, but it doesn’t necessarily have to be from the system to the surroundings.
To summarize, for a spontaneous process to occur, entropy of the universe must increase and the flow of heat must be present, but the enthalpy of the system can remain the same, increase, or decrease, depending on the process.
To learn more about spontaneous, click here:
https://brainly.com/question/5372689
#SPJ11
Indicate the electron pair geometry and the molecular geometry for each of the six compounds.
Compound Electron pair geometry Molecular geometry
a) A sulfur atom is double bonded to an oxygen atom on the left and the right, and has a lone pair. Each oxygen atom has two lone pairs.
b) A sulfur atom is bonded to a chlorine atom on the left and the right, and has two lone pairs. Each chlorine atom has three lone pairs.
tetrahedral
c) A beryllium atom is bonded to two chlorine atoms 180 degrees apart. Each chlorine atom has three lone pairs.
d)A phosphorous atom is bonded to a fluorine atom on the left, the right, and the bottom, and has one lone pair. Each fluorine atom has three lone pairs.
e)A boron atom is bonded to a fluorine atom on the left, the right, and the bottom. Each fluorine atom has three lone pairs.
f)A carbon atom is bonded to a hydrogen atom on the left, the right, the top, and the bottom.
a) The electron pair geometry of the compound with a sulfur atom double bonded to an oxygen atom on the left and the right and has a lone pair is tetrahedral, whereas its molecular geometry is bent. Each oxygen atom has two lone pairs.b) The electron pair geometry of the compound with a sulfur atom bonded to a chlorine atom on the left and the
right and has two lone pairs is tetrahedral, whereas its molecular geometry is bent. Each chlorine atom has three lone pairs.c) The electron pair geometry of the compound with a beryllium atom bonded to two chlorine atoms 180 degrees
apart, each chlorine atom having three lone pairs, is linear. Its molecular geometry is also linear.d) The electron pair geometry of the compound with a phosphorous atom bonded to a fluorine atom on the left, the right, and the bottom,
and has one lone pair is tetrahedral. Its molecular geometry is trigonal pyramidal. Each fluorine atom has three lone pairs.e) The electron pair geometry of the compound with a boron atom bonded to a fluorine atom on the left, the right, and the bottom, and each fluorine atom having three lone pairs is trigonal planar. Its molecular geometry is also trigonal planar.f) The electron pair geometry of the compound with a carbon atom bonded to a hydrogen atom on the left, the right, the top, and the bottom is tetrahedral. Its molecular geometry is also tetrahedral. The bond angle between the carbon and hydrogen atoms is 109.5 degrees.
The electron pair geometry of each compound is determined by its molecular geometry, which depends on the number of bonds and lone pairs of electrons around the central atom. When there are two bonded atoms and no lone pairs, the molecular geometry is linear. When there are three bonded atoms and no lone pairs, the molecular geometry is trigonal planar. When there are two bonded atoms and one lone pair, the molecular geometry is bent or angular. When there are four bonded atoms and no lone pairs, the molecular geometry is tetrahedral. When there are three bonded atoms and one lone pair, the molecular geometry is trigonal pyramidal.
For more similar questions on topic Indicate the el
https://brainly.com/question/29470595
#SPJ11
The electron pair geometry of all six compounds is tetrahedral, while the molecular geometry of (b), (d), and (e) is trigonal planar, and the molecular geometry of (a), (c), and (f) is tetrahedral.
On the other hand, molecular geometry refers to the actual arrangement of atoms in space.
a) In the case of sulfur dioxide the electron pair geometry is trigonal planar because the sulfur atom has three electron pairs and one lone pair, resulting in a bent or V-shaped molecular geometry.
b) For sulfur trichloride, the electron pair geometry is tetrahedral because the sulfur atom has four electron pairs and one lone pair, resulting in a trigonal pyramidal molecular geometry.
c) In beryllium chloride the electron pair geometry is linear because the central atom has only two electron pairs and no lone pairs, resulting in a linear molecular geometry.
d) For phosphorus trifluoride, the electron pair geometry is tetrahedral because the central atom has four electron pairs and one lone pair, resulting in a trigonal pyramidal molecular geometry.
e) In boron trifluoride, the electron pair geometry is trigonal planar because the central atom has only three electron pairs and no lone pairs, resulting in a trigonal planar molecular geometry.
f) Finally, for methane, the electron pair geometry is tetrahedral because the central atom has four electron pairs and no lone pairs, resulting in a tetrahedral molecular geometry.
Learn more about electron pair geometry
https://brainly.com/question/24232047
#SPJ4
___________________ is a property that can be observed in a substance? (multiple answers)
A magnetism
B texture
C color
D odor
Magnetism, texture, color and odor are all properties that can be observed in a substance.
What are properties of a substance?Properties of a substance are characteristics that can be used to describe and identify the substance.
Physical properties are those that can be observed or measured without changing the composition of the substance, while chemical properties describe how a substance reacts with other substances.
Intensive properties are independent of the amount of substance, while extensive properties depend on the amount of substance. Examples of properties include color, texture, density, melting point, boiling point, reactivity, and flammability.
Learn about Physical properties of a substance here https://brainly.com/question/12330204
#SPJ1
14)
Hydrogen Emission Spectrum
The diagram below represents the emission spectrum of hydrogen in the visible range. The line on the left represents the
emission with the smallest wavelength.
Which of the following is the best explanation pertaining to the distribution of visible light in hydrogen's emission spectrum?
The fact that the spectrum consists of discrete lines indicates that the energy levels in the hydrogen atom are quantized, meaning that they can only exist at specific energy values, with no values in between.
What is Emission?
In the context of physics and chemistry, emission refers to the process of releasing energy or particles from a source. This can happen in many forms, such as electromagnetic radiation, particles, or heat. For example, when an excited atom returns to its ground state, it emits a photon of electromagnetic radiation. Similarly, a radioactive substance emits particles as it decays, and a hot object emits heat energy.
The best explanation pertaining to the distribution of visible light in hydrogen's emission spectrum is that it consists of discrete lines. These lines correspond to the emission of photons of specific energies as excited electrons in the hydrogen atoms return to lower energy levels. Each line in the spectrum corresponds to a specific transition between energy levels in the atom, with the longest wavelength (lowest frequency and energy) corresponding to the lowest energy transition, and the shortest wavelength (highest frequency and energy) corresponding to the highest energy transition.
Learn more about Emission from given link
https://brainly.com/question/14275614
#SPJ1
ka toa 0.109 m solution of a weak acid (ha) has a ph of 4.50. what is the pka of the acid? enter pka to 4 decimal places. pka
The pKₐ of a 0.109M solution of a weak acid (HA) is 4.50 and pKₐ arranged to 4 decimal places is 4.5000.
The pH of a solution of a weak acid can be used to determine the pKₐ of the acid. The pKa is the negative logarithm of the acid dissociation constant (Kₐ). In other words, pKₐ = -log Kₐ.
To calculate the pKₐ of a weak acid, we can use the following equation:
pKₐ = pH + log (base concentration/acid concentration).
In this case, we are given a 0.109 m solution of a weak acid (HA) with a pH of 4.50.
To calculate the pKₐ, we need to know the concentration of the acid and the concentration of the base. Since we do not know the concentrations, we can assume that the acid and base concentrations are equal and equal to 0.109 m.
Using the equation above, we can calculate the pKₐ as follows:
pKₐ = 4.50 + log (0.109 / 0.109) = 4.50 + 0 = 4.50.
Therefore, the pKₐ of the weak acid (HA) comes out to be 4.50, and rearranging it to four decimal places gives the answer as 4.5000.
To know more about pKₐ, refer here:
https://brainly.com/question/30419524#
#SPJ11
g what is the iupac name for the following compound? a. 2-bromobutanal b. 3-bromobutanone c. 2-bromobutanone d. 3-bromobutanal
The IUPAC name for the compound 2-bromobutanal is 2-bromobutane-1-al.
The IUPAC name for the compound 3-bromobutanone is 3-bromobutane-1-one. The IUPAC name for the compound 2-bromobutanone is 2-bromobutane-1-one. The IUPAC name for the compound 3-bromobutanal is 3-bromobutane-1-al.
The given compound is a ketone, identify the longest carbon chain that includes the carbonyl group, then change the -e ending of the corresponding alkane name to -one, which is the suffix for a ketone.
We can see that the carbonyl group is located at the second carbon atom of the parent chain, and the parent chain is the butane which has four carbon atoms. The name of this ketone is 2-bromobutanone because the bromine atom is bonded to the second carbon atom of the parent chain. Hence, the correct option is c. 2-bromobutanone.
Read more about carbonyl :
https://brainly.com/question/13564853
#SPJ11
What is one way that the layers of the atmosphere help to maintain life on Earth?
One way that the layers of the atmosphere help to maintain life on Earth is by absorbing and scattering harmful solar radiation, such as ultraviolet (UV) radiation.
The ozone layer, which is located in the stratosphere layer of the atmosphere, absorbs most of the Sun's harmful UV radiation, preventing it from reaching the Earth's surface where it can cause DNA damage and skin cancer. Additionally, the atmosphere helps regulate the Earth's temperature by trapping heat from the Sun through the greenhouse effect, which is essential for maintaining a stable and habitable climate. The atmosphere also contains oxygen, which is necessary for the survival of many living organisms.
To know more about scattering click here:
brainly.com/question/3292565
#SPJ4
if 7.1 ml of tert-butyl chloride are involved in the friedel-crafts alkylation reaction, how many moles of tert-butyl chloride are present?
The moles of tertiary-butyl chloride present are 0.065 moles.
To calculate the number of moles of tert-butyl chloride involved in Friedel-Crafts alkylation, we will use the following formula:
Number of moles = Mass / Molar mass
The molar mass of tert-butyl chloride = 92.57 g/mol
The volume of tert-butyl chloride = 7.1 ml
Using the density of tertiary-butyl chloride, we can convert the volume into mass.
The density of tertiary-butyl chloride is 0.853 g/ml.
Therefore, Mass of tert-butyl chloride = 7.1 ml × 0.853 g/ml = 6.05g
Substituting the values in the formula:
The number of moles = 6.05 g / 92.57 g/mol= 0.065 moles
Therefore, 0.065 moles of tertiary-butyl chloride are present in the Friedel-Crafts alkylation reaction.
To know more about tertiary-butyl chloride, refer here:
https://brainly.com/question/2273070#
#SPJ4
which type of bond is responsible for holding two water molecules together, creating the properties of water? multiple choice covalent hydrogen double covalent ionic polar
The type of bond responsible for holding two water molecules together, creating the properties of water, is a polar covalent bond.
Explanation: The type of bond that is responsible for holding two water molecules together, creating the properties of water is hydrogen bond.What is a hydrogen bond?A hydrogen bond is a type of chemical bond that exists between two electrically polar molecules. Hydrogen bonds are much weaker than covalent or ionic bonds, but they do serve a significant purpose in both organic and inorganic chemistry. Example of a hydrogen bond, one example of a hydrogen bond is found in between two water molecules. Each water molecule is composed of two hydrogen atoms and one oxygen atom, and each hydrogen atom is bonded covalently to the oxygen. However, the shared electrons are not distributed evenly between the two atoms. Because oxygen is more electronegative than hydrogen, it pulls electrons away from the hydrogen atoms, resulting in a slight charge imbalance within the molecule. The oxygen atom in one water molecule is therefore attracted to the hydrogen atoms in another water molecule. This attraction produces a hydrogen bond between the two molecules, which helps to hold them together.
For more such questions on polar covalent bond
https://brainly.com/question/13560841
#SPJ11
write a balanced chemical equation for the reaction of aqueous solutions of magnesium chloride and potassium phosphate
Answer: The balanced chemical equation for the reaction of aqueous solutions of magnesium chloride and potassium phosphate is; MgCl2(aq) + K3PO4(aq) → Mg3(PO4)2(s) + 6KCl(aq)
To balance the given chemical equation, the number of atoms of elements on both sides of the equation must be equal. When these two aqueous solutions are mixed, magnesium phosphate (Mg3(PO4)2) and potassium chloride (KCl) are produced. The two products are both in aqueous solutions.
Potassium chloride exists as ions in aqueous solution. In this reaction, the ions from magnesium chloride and potassium phosphate are reacted together. The reaction results in precipitation.
The balanced equation shows that three molecules of potassium phosphate react with two molecules of magnesium chloride to form one molecule of magnesium phosphate and six molecules of potassium chloride.
Therefore, the number of atoms of each element is equal on both sides.
Learn more about balanced chemical equation here:
https://brainly.com/question/28294176#
#SPJ11
1.) You have a sample of 1.64 moles of aluminum carbonate is mixed with lithium to produce lithium carbonate and aluminum. How many moles of lithium would completely react with all the aluminum carbonate.
2.) a synthesis reaction between magnesium and nitrogen forms an ionic compound magnesium nitride. If you have 4.226 moles of magnesium how many grams of nitrogen will completely react with the magnesium.
3.) given the following equation 8Fe+S8>8FeS, how many grams FeS are produced, and what mass of iron is needed to react with 16 grams of sulfur
4.) B2H6+3O2>HBO2+2H2O, what mass of O2 will be needed to burn 31.6g B2H6, and how many miles of water are produced from 12.8g B2H6
Lithium carbonate contains 18.78% mass percent lithium. It should be noted that a compound's overall percentage composition of all its constituent elements is always 100%.
Is lithium carbonate a depressive medication?Only depression related to bipolar illness is authorized for lithium use. When combined with an antidepressant, it may also be successful in alleviating other types of depression, although further research is required. Discuss the possibility of adding lithium with your doctor if you are on an antidepressant but are still experiencing symptoms.
What purpose does lithium carbonate serve?This substance is employed for the treatment of mania and depression (bipolar disorder). By bringing certain natural compounds back into equilibrium in the brain, it helps to calm mood and lessen excessive behavior.
To know more about Lithium Carbonate visit:
https://brainly.com/question/15127937
#SPJ1
1. What particles determine the mass number?
2. Why is mass number always a whole number?
3. One isotope of carbon (C) has exactly the same mass number and atomic mass since it was used as the definition of the atomic mass unit (amu). Which isotope is it and what is its atomic mass?
4. What is the approximate mass of one proton? __________amu
5. What is the approximate mass of one neutron? __________amu
The mass number of an atom is determined by the total number of protons and neutrons in its nucleus.
The mass number is always a whole number because it is the sum of the number of protons and neutrons in the nucleus, and both of these particles have a mass of approximately 1 atomic mass unit (amu). Since the mass of an electron is much smaller compared to protons and neutrons, it is not included in the calculation of the mass number.
The isotope of carbon that has the same mass number and atomic mass is carbon-12. Its atomic mass is exactly 12 amu.
The approximate mass of one proton is 1 amu.
The approximate mass of one neutron is also 1 amu.
A sample of oxygen gas occupies 1. 9l at pressure of 1156 torr,what volume will it occupy when the pressure is changed tp912 torrand temparature remains constant?
The volume of oxygen gas will it occupy when the pressure is changed to 912 torr and temperature remains constant is 2.41 L.
PV = nRT is the equation for an ideal gas. In this equation, P stands for the ideal gas's pressure, V for the ideal gas' volume, n for the total amount of the ideal gas expressed in moles, R for the universal gas constant, and T for temperature.
a formula that converts the volume and pressure of a mole of gas into its combined thermodynamic temperature and gas constant. At low pressures, the equation is a decent approximation for actual gases and is precise for an ideal gas. Also known as the ideal gas law and ideal gas equation.
According to ideal gas equation
PV = nRT
Here P is pressure, V is Volume, n is mole, R is gas constant, T is temperature
Now if T is constant the nRT term will become constant
So PV = constant
And P1V1 = P2V2
now P1 = 1156 torr V1 = 1.9L
P2 = 912 torr V2 = ??
Put all values
1156 × 1.9 = 912 × V2
V2 = 2.41 L.
Learn more about Volume of gas:
https://brainly.com/question/24453878
#SPJ4
graphite and diamond have the same chemical compositions and different crystalline structures. group of answer choices true false
True. Graphite and diamond both have the same chemical composition of carbon, but they have very different crystalline structures.
Graphite is a form of carbon with a hexagonal lattice structure, while diamond is an allotrope of carbon with an isometric lattice structure. This difference in crystalline structure leads to graphite's much softer consistency and its lubricating properties, while diamond is the hardest known mineral.
The difference between graphite and diamond can be illustrated through their different properties. Graphite is the softest mineral known and is also the most lubricating, meaning it can be used to reduce friction between two objects. It has low electrical and thermal conductivity and is an electrical insulator. On the other hand, diamond is the hardest mineral known and has very high electrical and thermal conductivity. It is also an electrical conductor and is much more transparent than graphite.
In conclusion, graphite and diamond both have the same chemical composition of carbon but have different crystalline structures. This leads to their different properties, as well as their different uses in industry.
To know more about chemical composition click on below link :
https://brainly.com/question/678196#
#SPJ11
calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.
The number of moles of sodium hydroxide present in the sample, is 0.00839 moles.
To calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution, use the following equation:
Moles = concentration (M) x volume (L)
Moles = 0.315 M x 0.02680 L
Moles = 0.00839 moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.
To explain this in further detail, moles are a unit of measurement for an amount of substance and are typically expressed as mol. A mole is equal to 6.02 x 10^23 atoms or molecules, and is represented by the letter 'n' or 'N'.
The concentration of a solution is a measure of the amount of solute dissolved in a given volume of solvent and is expressed in molarity (M). Volume is expressed in litres (L).
By multiplying the concentration of a solution (0.315 M) by the volume of the sample (0.02680 L).
Sodium hydroxide, also known as lye, is a highly reactive and caustic inorganic compound. It is commonly used in soap and detergent production, as well as in the paper and textile industries.
It is also used in the production of a variety of other chemicals, including pharmaceuticals and food additives.
To know more about Sodium hydroxide refer here:
https://brainly.com/question/29327783#
#SPJ11
At this point, you should have some idea of how a strong acid behaves in solution once it dissolves. Choose all that apply as they relate to a strong acid.
Group of answer choices
A strong acid dissociates completely in solution to produce its conjugate
The conjugate of a strong acid is basic in solution
The conjugate of a strong acid is neutral in pH when in solution
The conjugate of a strong acid is an anion
The conjugate of a strong acid is a cation
A strong acid dissociates partially in solution to produce its conjugate
The correct answers are: A strong acid dissociates completely in solution to produce its conjugate. The conjugate of a strong acid is an anion. The conjugate of a strong acid is neutral in pH when in solution. The conjugate of a strong acid is basic in solution.
A strong acid is a compound that dissociates completely in a solution to produce H+ ions. An example of a strong acid is Hydrochloric acid (HCl) which dissociates completely in a solution to produce H+ ions and Cl- ions.
The conjugate base is an anion and it is formed when the acid donates a proton. It is neutral in pH when it is in a solution. For instance, HCl donates its proton to water to form H3O+ and Cl-. H2O is the base (conjugate) of H3O+ and Cl- is the base (conjugate) of HCl.
When the conjugate base of a strong acid is dissolved in water, it accepts a proton from water and increases the concentration of OH- ions in solution. Therefore, the conjugate base of a strong acid is basic in solution.
To know more about strong acid, refer here:
https://brainly.com/question/28858976#
#SPJ11
the mineral manganosite, manganese (ii) oxide, crystallizes in the sodium chloride like structure, with a density of 5.365 g /cm3. find the unit cell edge length of manganosite.
Manganosite, also known as manganese (II) oxide, has a sodium chloride-like structure and a density of 5.365 g /cm³.
The unit cell edge length of manganosite is 0.090 nm.
The unit cell edge length of manganosite can be calculated using the given information.
We know that the structure of manganosite is similar to that of sodium chloride, which is a face-centered cubic (FCC) crystal structure.
As a result, the edge length of the unit cell can be determined using the following formula:
2r = a√2, where "r" is the radius of the cation and "a" is the edge length of the unit cell.
Since we know that manganosite has an FCC structure and the density, we can calculate the radius of manganese ion.
For FCC, the coordination number is 12.
Therefore, the formula for the radius of a cation is r = ((3/4π) × (V/n))⅓, where V is the molar volume, n is the number of particles per mole and 3/4π is the packing factor. The atomic weight of manganese is 54.94 g/mol.
The density of manganosite is given by:
density = mass/volume or density
density = 54.94/n × (4/3)πr³.
Rearranging the formula:
V/n = 4/3πr³= (density x n × 3) / (54.94 x 4π).
Substituting the values:
5.365 = (density x n x 3) / (54.94 × 4π).
Solving for "n":
n = density x 54.94 x 4π / (3 x 5.365 x 6.023 x 10²³) = 2.206 x 10⁶.
The atomic radius of manganese (II) is 0.127 nm.
This implies that the radius of manganese (II) in the crystal lattice is half of that, or 0.0635 nm.
Putting all of the values in the formula: 2 x 0.0635 = a√2.
a = 2 x 0.0635/√2
a = 0.127/√2
a= 0.090 nm (to 3 significant figures).
Therefore, the unit cell edge length of manganosite is 0.090 nm.
For more such questions on Manganosite, click on:
https://brainly.com/question/20165263
#SPJ11
how much 2.25 m h3po4, in ml, would you need to add to 50.00 ml of 3.50 m ca(oh)2 in order to neutralize the solution? ml of h3po4
Since 1 ml is equal to 1 cm3, 156 ml is also equal to 156 cm3. Therefore, the amount of 2.25 m H3PO4, in ml, that you need to add to 50.00 ml of 3.50 m Ca(OH)2 in order to neutralize the solution is 18.18 ml.
To neutralize 50.00 ml of 3.50 m Ca(OH)2 with 2.25 m H3PO4, you would need 18.18 ml of H3PO4.
The amount of H3PO4 needed to neutralize the Ca(OH)2 solution, the stoichiometry of the reaction must first be determined.
The neutralization reaction of Ca(OH)2 and H3PO4 is:
Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 6H2O
In this reaction, the mole ratio of H3PO4 to Ca(OH)2 is 2:1. Thus, for every mole of Ca(OH)2, two moles of H3PO4 are required.
The molarity (m) of a solution is the number of moles of solute per liter of solution. Therefore, the number of moles of Ca(OH)2 in 50.00 ml of 3.50 m Ca(OH)2 is:
n Ca(OH)2 = M x V = 3.50 m x (50.00 ml / 1000 ml/L) = 0.175 moles Ca(OH)2
Since the mole ratio of H3PO4 to Ca(OH)2 is 2:1, the number of moles of H3PO4 needed to neutralize this amount of Ca(OH)2 is twice that number: 0.35 moles H3PO4.
Since the molarity (m) of a solution is the number of moles of solute per liter of solution, the number of liters of 2.25 m H3PO4 needed to neutralize 0.35 moles H3PO4 is:
V H3PO4 = n H3PO4 / M H3PO4 = 0.35 moles / 2.25 m = 0.156 liters
Therefore, the volume of 2.25 m H3PO4 needed to neutralize 50.00 ml of 3.50 m Ca(OH)2 is:
V H3PO4 = 0.156 liters x (1000 ml / 1 liter) = 156 ml
Since 1 ml is equal to 1 cm3, 156 ml is also equal to 156 cm3. Therefore, the amount of 2.25 m H3PO4, in ml, that you need to add to 50.00 ml of 3.50 m Ca(OH)2 in order to neutralize the solution is 18.18 ml.
to know more about neutralize refer here:
https://brainly.com/question/27891712#
#SPJ11
Plese help im strugging and im d***
How many moles of aluminum chloride ALCL3 for when 81 g AL reacts with plenty of chlorine? (AI: 27 g/mol) 2AI + 3CI2 ---> 2AICI3
81 g of Al reacts with plenty of chlorine to form 3 moles of aluminum chloride (AlCl3).
StepsTo find the number of moles of aluminum chloride (AlCl3), we need to first calculate the number of moles of aluminum (Al) reacting with chlorine (Cl2) based on the given mass of Al.
Given: Mass of Al = 81 g; Molar mass of Al = 27 g/mol
Number of moles of Al = Mass of Al / Molar mass of Al
= 81 g / 27 g/mol
= 3 moles of Al
From the balanced chemical equation, we know that 2 moles of Al react with 3 moles of Cl2 to form 2 moles of AlCl3.
Thus, for 3 moles of Al, we need 3/2 * 3 moles of Cl2 = 4.5 moles of Cl2.
And, for 2 moles of AlCl3, we need 4.5/3 * 2 moles of AlCl3 = 3 moles of AlCl3.
Therefore, 81 g of Al reacts with plenty of chlorine to form 3 moles of aluminum chloride (AlCl3).
learn more about moles here
https://brainly.com/question/14357742
#SPJ1
The equilibrium constant for a reaction is greater than 1.0 at temperatures above 500 K but less than 1.0 at
temperatures below 500 K. What can be concluded about the values of AH and AS for the reaction? (Assume
that AH and AS are independent of temperature.)
(A) AH> 0 and AS > 0
(B) AH> 0 and AS < 0
(C) AH < 0 and AS > 0
(D) AH <0 and AS < 0
Answer:
(C) AH < 0 and AS > 0
When the equilibrium constant is greater than 1.0 at higher temperatures, it indicates that the reaction is exothermic (AH < 0) and that the entropy change (AS) is positive. At lower temperatures, the equilibrium constant is less than 1.0, indicating that the reaction is endothermic (AH > 0) and that the entropy change (AS) is negative. Therefore, the correct answer is (C) AH < 0 and AS > 0.
Based on the given information, we can conclude that AH <0 and AS > 0. Therefore, option C is correct.
What is equilibrium constant ?The equilibrium constant (K) for a reaction can be expressed in terms of the standard free energy change (∆G°), standard enthalpy change (∆H°), and standard entropy change (∆S°) as follows:
K = e^(-∆G°/RT) = e^(-∆H°/RT) * e^(∆S°/R)
where R is the gas constant and T is the temperature in Kelvin.
If the equilibrium constant is greater than 1 at temperatures above 500 K, then ∆G° must be negative at those temperatures.
This means that the reaction is exergonic (releases energy) and favors the formation of products over reactants. Since ∆G° = ∆H° - T∆S°, it follows that ∆H° must be negative and/or ∆S° must be positive.
On the other hand, if the equilibrium constant is less than 1 at temperatures below 500 K, then ∆G° must be positive at those temperatures.
This means that the reaction is endergonic (requires energy) and favors the formation of reactants over products. Again, using ∆G° = ∆H° - T∆S°, we can conclude that ∆H° must be positive and/or ∆S° must be negative.
Therefore, based on the given information, we can conclude that AH <0 and AS > 0. The negative ∆H° at higher temperatures drives the reaction towards product formation, while the positive ∆S° at higher temperatures increases the entropy and randomness of the system, also favoring product formation.
Find more on equilibrium constant:
https://brainly.com/question/10038290
#SPJ2
the natural cements that hold clasts together precipitate in the empty pore spaces after compaction. those precipitates come from
Natural cements that hold clasts together precipitate in the empty pore spaces after compaction due to the combined effects of;
Pressure, temperature, chemical composition, and length of exposure to groundwater. The most common cements are calcite, quartz, clay, and iron oxide.
The natural cements that hold clasts together precipitate in the empty pore spaces after compaction come from the groundwater that has traveled through the sediment.
The groundwater carries dissolved ions of calcium, silica, and other elements.
As the pore spaces are compressed, the pressure on the water within them increases, causing the dissolved ions to come out of solution as solid minerals or precipitates.
These cements act to bind the sediment particles together and are commonly composed of calcite, quartz, clay, and iron oxide.
Compaction of the sediment is one of the major factors controlling cementation. As the sediment is buried deeper and pressure increases, the pore spaces are squeezed shut, forcing the fluids out of them.
Once the water is squeezed out, the dissolved ions can come out of solution and cement the sediment together.
Temperature is another factor that influences the rate of cementation. The warmer the temperature, the faster the reactions occur, so cementation can be accelerated at higher temperatures.
In addition to temperature and pressure, the chemical composition of the groundwater also affects cementation.
The concentration of ions in the water determines what cements are formed, as the most soluble ions will be precipitated first.
For example, calcium ions in groundwater will be the first to precipitate, forming calcite cement.
Finally, the length of time during which the sediment is exposed to the groundwater can also influence cementation. The longer the sediment is exposed to the water, the more time it has to react and form cement.
to know more about cement refer here:
https://brainly.com/question/15286339#
#SPJ11
molecules that are composed of carbon and hydrogen atoms and provide energy for life processes are called
Answer: The molecules that are composed of carbon and hydrogen atoms and provide energy for life processes are called organic molecules.
What are organic molecules?
Organic molecules are molecules composed of carbon and hydrogen atoms joined by covalent bonds, typically in long chains or rings with various functional groups that classify the molecules into specific categories. Organic molecules include carbohydrates, lipids, proteins, and nucleic acids, which are all necessary for life processes.
What are the characteristics of organic molecules?
Organic molecules are distinguished by their capacity to form long chains, often with branches or rings, made up of C-C covalent bonds. These molecules can be polar, with one end of the molecule carrying a partial positive charge while the other end carries a partial negative charge.
These polar molecules can interact with each other to create hydrogen bonds, which can result in the formation of complex structures like proteins and nucleic acids.
Additionally, the large size and complex structure of organic molecules can lead to significant variation in their properties, such as solubility and reactivity, which can be important for their function in living organisms.
Learn more about Organic molecules here:
https://brainly.com/question/10504103#
#SPJ11
a linear a tetrahedral
a bent a square planar
a trigonal planar an octahedral a seesaw a trigonal bipyramidal In structure (a), four pairs of electrons give ___ electron geometry. The lone pair would a trigonal pyramidal cause lone pair-bonded pair repulsions and would have __ molecular geometry. In structure (b), five pairs of electrons give ___electron geometry. The lone pair occupies an equatorial position to minimize lone pair-bonded pair repulsions, and the molecule would have ___ molecular geometry. In structure (c), six pairs of electrons give __ electron geometry. The two lone pairs would occupy opposite positions to minimize lone pair-lone pair repulsions, and the molecule would have ___ molecular geometry.
In structure (a), four pairs of electrons give tetrahedral electron geometry. The lone pair would cause lone pair-bonded pair repulsions and would have a trigonal pyramidal molecular geometry.
In structure (b), five pairs of electrons give trigonal bipyramidal electron geometry. The lone pair occupies an equatorial position to minimize lone pair-bonded pair repulsions, and the molecule would have a square pyramidal molecular geometry.
In structure (c), six pairs of electrons give octahedral electron geometry. The two lone pairs would occupy opposite positions to minimize lone pair-lone pair repulsions, and the molecule would have a square planar molecular geometry.
For more details about electrons click here:
https://brainly.com/question/1255220#
#SPJ11
conformational or shape change that enzymes undergo when reactant molecules bind to the active site CALLED
When reactant molecules bind to the active site, the conformational or shape change that enzymes undergo is called induced fit.
Induced fit is the change in the shape of the active site of an enzyme, caused by the binding of a substrate. Induced fit helps in the proper alignment of the substrate with the catalytic site of the enzyme. It enhances the ability of the enzyme to carry out the chemical reaction.
Induced fit is a term used in biochemistry and enzyme kinetics. It describes the process of conformational changes in an enzyme when it binds to a substrate. This change helps in the proper orientation of the enzyme and substrate for the chemical reaction to occur.
Therefore we can say that the conformational or shape change that enzymes undergo when reactant molecules bind to the active site is called "induced fit."
To learn more about enzymes refer: https://brainly.com/question/13694504
#SPJ11
how many grams of neutral red would your ia have to use to create 100ml of a 4% w/v stock solution? ____ gm
To create 100ml of a 4% w/v stock solution, how many grams of neutral red would your IA have to use? It is 4 gm.
Let's calculate this in detail:
To make 100 ml of 4% w/v stock solution of Neutral Red dye, the quantity of Neutral Red that must be used can be calculated as follows:
Weight of Neutral Red = (Volume x Concentration x 10^4) / 100
Weight of Neutral Red = (100 x 4 x 10^4) / 100
Weight of Neutral Red = 4000 mg = 4 gm
Therefore, to create 100 ml of a 4% w/v stock solution of Neutral Red dye, 4 gm of Neutral Red must be used. Hence, the correct answer is 4 gm.
Learn more about solutions: What is meant by concentration of a solution? https://brainly.com/question/17206790
#SPJ11
suppose the 1h nmr spectrum shown below is obtained from a reaction product of a student who wanted to make acetyl ferrocene from ferrocene, what can you say about the product?
Answer: The 1H NMR spectrum shown below is most likely that of the product obtained from a reaction of ferrocene and acetic anhydride.
The spectrum displays a single peak at 6.6 ppm, which is characteristic of a vinyl proton in a substituted cyclopentadienyl ring. The peak at 5.2 ppm is that of a methylene protons in the acyl substituent. The peak at 1.2 ppm is that of a proton attached to a tertiary carbon. This strongly suggests that the student has successfully synthesized acetyl ferrocene.
Acetyl ferrocene is a stable compound, containing a cyclopentadienyl ring with an acyl substituent attached at one of the ring carbons. It is synthesized by reacting ferrocene with acetic anhydride, a reaction that requires heating. The reaction leads to the substitution of a proton in the cyclopentadienyl ring by an acyl group, resulting in acetyl ferrocene.
The 1H NMR spectrum of this product contains a single peak at 6.6 ppm, indicating the presence of a vinyl proton in the cyclopentadienyl ring, a peak at 5.2 ppm, indicating the presence of a methylene protons in the acyl substituent, and a peak at 1.2 ppm, indicating the presence of a proton attached to a tertiary carbon.
Therefore, it can be concluded that the student has successfully synthesized acetyl ferrocene from ferrocene using acetic anhydride.
Learn more about methylene protons here:
https://brainly.com/question/29585359#
#SPJ11
order: 1/3 strength. ensure 900 ml by ng tube over 8 hours. how many mls of water will you add to ensure 900 ml of 1/3 strength? quizlate
In order to ensure that 900 mL of 1/3 strength solution is delivered over 8 hours via a nasogastric tube, you must add 300 mL of water to the 1/3 strength solution.
This will give a total volume of 1.2 L, which when divided by 8 hours, equals 150 mL per hour.
Use the formula for calculating dilution, which is: Final Volume / Concentration = Amount of Solvent to be Added.
We are given the Final Volume, which is 900 mL, and the Concentration, which is 1/3 strength. We can calculate the Amount of Solvent (in this case, water) to be Added :
900 mL / (1/3) = 2700 mL
The amount of water needed to be added to the 1/3 strength solution to achieve 900 mL of 1/3 strength is 2700 mL.
However, since the total volume of the solution must not exceed 1.2 L, only 300 mL of water must be added to the 1/3 strength solution,
giving us a total volume of 1.2 L when the 900 mL of 1/3 strength is taken into consideration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11